The importance of selenium in food enrichment processes. A comprehensive review

Selenium is an essential element that determines the proper life functions of human and animal organisms. The content of selenium in food varies depending on the region and soil conditions. Therefore, the main source is a properly selected diet. However, in many countries, there are shortages of this element in the soil and local food. Too low an amount of this element in food can lead to many adverse changes in the body. The consequence of this may also be the occurrence of numerous potentially life-threatening diseases. Therefore, it is very important to properly introduce methods that condition the supplementation of the appropriate chemical form of this element, especially in areas with deficient selenium content. This review aims to summarize the published literature on the characterization of different types of selenium-enriched foods. At the same time, legal regulations and prospects for the future related to the production of food enriched with this element are presented. It should be noted that there are limitations and concerns with the production of such food due to the narrow safety range between the necessary and the toxic dose of this element. Therefore, selenium has been treated with special care for a very long time. For this reason, the presented mechanisms of production processes related to increasing the scale of selenium supplementation should be constantly monitored. Appropriate monitoring and development of the technological process for the production of selenium-enriched food is very important. Such food should ensure consumer safety and repeatability of the obtained product. Understanding the mechanisms and possibilities of selenium accumulation by plants and animals is one of the most important directions in the development of modern bromatology and the science of supplementation. This is particularly important in the case of rational nutrition and supplementing the human diet with an essential element such as selenium. Food technology is facing these challenges today.     

Tetrameric mouse acetylcholinesterase: continuum diffusion rate calculations by solving the steady-state Smoluchowski equation using finite element methods

The tetramer is the most important form for acetylcholinesterase in physiological conditions, i.e., in the neuromuscular junction and the nervous system. It is important to study the diffusion of acetylcholine to the active sites of the tetrameric enzyme to understand the overall signal transduction process in these cellular components. Crystallographic studies revealed two different forms of tetramers, suggesting a flexible tetramer model for acetylcholinesterase. Using a recently developed finite element solver for the steady-state Smoluchowski equation, we have calculated the reaction rate for three mouse acetylcholinesterase tetramers using these two crystal structures and an intermediate structure as templates. Our results show that the reaction rates differ for different individual active sites in the compact tetramer crystal structure, and the rates are similar for different individual active sites in the other crystal structure and the intermediate structure. In the limit of zero salt, the reaction rates per active site for the tetramers are the same as that for the monomer, whereas at higher ionic strength, the rates per active site for the tetramers are approximately 67%-75% of the rate for the monomer. By analyzing the effect of electrostatic forces on ACh diffusion, we find that electrostatic forces play an even more important role for the tetramers than for the monomer. This study also shows that the finite element solver is well suited for solving the diffusion problem within complicated geometries.     

Isolation of telomere DNA from Neurospora crassa.

The most distal known gene on Neurospora crassa linkage group VR, his-6, was cloned. A genomic walk resulted in isolation of the telomere at VR. It was obtained from a library in which the endmost nucleotides of the chromosome had not been removed by nuclease treatment before being cloned, and mapping indicates that the entire chromosome end has probably been cloned. Sequences homologous to the terminal 2.5 kilobases of DNA from VR from these Oak Ridge N. crassa strains are found at other sites in the genome. To characterize these sites, I crossed an Oak Ridge-derived his-6 strain with a wild-type strain of different genetic background (Mauriceville) and characterized the hybridization patterns seen in the progeny. It appears that the sequences homologous to the VR terminus are found at genetically different sites in the two parental strains, and no hybridization to the VR telomere from Mauriceville was detected. The other genomic copies identified in the Oak Ridge parent were not telomeres. I suggest that any repeating sequence blocks found immediately adjacent to the VR terminus in Oak Ridge strains must be small and that the repeating element identified in that background may be an N. crassa transposable element integrated near the the chromosome end at VR.     

Roles of fimB and fimE in site-specific DNA inversion associated with phase variation of type 1 fimbriae in Escherichia coli.

Evidence obtained with an improved in vivo assay of fimbrial phase variation in Escherichia coli supported a revised understanding of the roles of fimB and fimE in the site-specific DNA rearrangement with which they are associated. A previously proposed model argued that fimB and fimE play antagonistic, unidirectional roles in regulating the orientation of the invertible DNA element located immediately upstream of fimA, the gene encoding the major subunit of type 1 fimbriae. This conclusion, though, is based on an in vivo DNA inversion assay using recombinant plasmid substrates under conditions that, among other things, were incapable of detecting recombination of the fim invertible element from the on to the off orientation. Using a modified system that overcome this and several additional technical problems, we confirmed that fimB acts independently of fimE on the invertible element and that the additional presence of fimE results in the preferential rearrangement of the element to the off orientation. It is now demonstrated that fimE can act in the absence of fimB in this recombination to promote inversion primarily from on to off. In contrast to the previous studies, the effect of fimB on a substrate carrying the invertible element in the on orientation could be examined. It was found that fimB mediates DNA inversion from on to off, as well as from off to on, and that, contrary to prior interpretations, the fimB-associated inversion occurs with only minimal orientational preference to the on phase.     

The coupling of biogeochemical cycles of nutrients

For any element which is incorporated into biomass, the biogeochemical cycle of that element in a given ecosystem will be coupled to that of any other element similarly incorporated. The mutual interaction of two such cycles is examined using a simple model in which each cycle is constrained into four compartments. In each cycle the assimilation rate (primary productivity) is related in a non-linear fashion to the two nutrients and to biomass. The interactions are represented by combining a hyperbolic dependence for each nutrient (involving a "Michaelis constant") with a logistic equation governing the dependence of rate on biomass (involving a "carrying capacity"). The response of the model to perturbation (e.g. mobilization of an abiotic reserve) is strongly governed by the values assigned to these constants. The coupled cycles can exhibit positive feed-back with anomalous responses of the steady state and time-dependent solutions may exhibit complex oscillatory behaviour. Both the steady-state sensitivity and the kinetic behaviour of such coupled systems are simplified if the range of atomic ratios permitted by the assimilation process is restricted. It will therefore be of importance to determine under what conditions the assimilation rates for different elements are governed by mass-action effects (Liebig's Law) or by stoichiometric constraints (Redfield ratios).     

Morphofunctional criteria for the choice of alimentary mixture ingredients for intra-intestinal administration

Morpho-functional changes in the intestine after application of highly caloric nutritional mixtures of different composition have been investigated in experiments on polyfistulous dogs in autoperfusion regimen. It was shown that in case of "element" mixture application the impairment of intestinal function is accompanied by morphological changes in epitheliocyte structure and intravascular disturbances. The optimal conditions of nutrient assimilation were revealed, using highly caloric mixtures with basic nutrient content and poly-, oligo- and monomer rations proportional to chyme.     

γ Chain transducing element: a shared pathway between endocrine and immune system

Several molecules, involved in the intracellular communication network, have been identified as the cause of primary immunodeficiencies. In most cases, these molecules are exclusively expressed in hematopoietic cells, being involved in cell development and/or functionality of terminal differentiated cells of immune system. In the case of γc, the abundance of the protein suggests a potential pleiotropic effect of the molecule. Immune and endocrine systems participate to an integrated network of soluble mediators that communicate and coordinate responsive cells to achieve effector functions in an appropriate fashion. It has been demonstrated a novel dependence of GH signaling on the common cytokines receptor γc in certain cell types, supporting the hypothesis of an interplay between endocrine and immune system. The evidence that different receptors share a few molecules may certainly lead to a better knowledge on the mechanism of coordination and integration of several pathways implicated in the control of cell growth and proliferation under physiological or pathogenic conditions. This review focuses on the γc as a common transducing element shared between several cytokines and growth hormone receptors, indicating a further functional link between endocrine and immune system.     

Static and Dynamic Mechanics Analysis on Artificial Hip Joints with Different Interface Designs by the Finite Element Method

Four different structural models of artificial joints were developed and the finite element method （FEM） was employed to investigate their mechanical characteristics under static and dynamic conditions. The materials used in the FEM calculation were ultra-high molecular weight polyethylene （UHMWPE）, 316L stainless steel, CoCrMo alloy and Ti6A14V alloy. The stress distribution, strain, and elastic deformation under static and dynamic conditions were obtained. Analysis and comparison of the ~alculation results of different models were conducted. It is shown that with the same parameters the model of a metallic femur head covered with an artificial cartilage layer is more similar to the structure of the natural human joint and its mechanical characteristics are the best of the four models.     

An In Vivo Experimental Validation of a Computational Model of Human Foot

Reliable computational foot models offer an alternative means to enhance knowledge on the biomechanics of human foot.Model validation is one of the most critical aspects of the entire foot modeling and analysis process.This paper presents an invivo experiment combining motion capture system and plantar pressure measure platform to validate a three-dimensional finiteelement model of human foot.The Magnetic Resonance Imaging(MRI)slices for the foot modeling and the experimental datafor validation were both collected from the same volunteer subject.The validated components included the comparison of staticmodel predictions of plantar force,plantar pressure and foot surface deformation during six loading conditions,to equivalentmeasured data.During the whole experiment,foot surface deformation,plantar force and plantar pressure were recorded simultaneouslyduring six different loaded standing conditions.The predictions of the current FE model were in good agreementwith these experimental results.     

Beyond microbial community composition: functional activities of the oral microbiome in health and disease

The oral microbiome plays a relevant role in the health status of the host and is a key element in a variety of oral and non-oral diseases. Despite advances in our knowledge of changes in microbial composition associated with different health conditions the functional aspects of the oral microbiome that lead to dysbiosis remain for the most part unknown. In this review, we discuss the progress made towards understanding the functional role of the oral microbiome in health and disease and how novel technologies are expanding our knowledge on this subject.     

Comparison between excessive grooming induced by bombesin or by ACTH: the differential elements of grooming and development of tolerance

Bombesin and ACTH-(1-24) induce a dose dependent increase in grooming behavior. Lower doses of bombesin induce a more general type of compulsive grooming in which most elements are involved, whereas higher amounts of bombesin induce a shift towards the element scratching at the cost of bodily grooming and sexual grooming. In contrast ACTH-(1-24) induces a dose dependent increase of all elements of grooming. It is concluded that the grooming displayed by animals treated with ACTH-(1-24) or with bombesin is of a completely different nature. In addition it is observed that under the conditions used tolerance occurs for the grooming inducing effect of ACTH-(1-24), but not for that of bombesin. Moreover, it appears that no cross tolerance exists between bombesin and ACTH-(1-24).     

Cloning and characterization of Vine-1, a LTR-retrotransposon-like element in Vitis vinifera L., and other Vitis species.

We report the organization of a grapevine chimeric gene Adhr-Vine-1, composed by an Adhr gene, into which a retroelement, Vine-1, was inserted. Sequence analysis revealed that Adhr is a member of the Adh multigene family, but does not correspond to any other grapevine Adh described to date. Vine-1, albeit defective, is the most complete LTR (long terminal repeat)-retrotransposon-like element described in Vitis vinifera L. It is 2392 bp long, with two almost identical LTRs (287 bp) in the same orientation, and flanked by direct repeats of a 5 bp host DNA. This element presents other features, characteristic of retroviruses and retrotransposons including inverted repeats, a primer binding site, and a polypurine tract. It has a single open reading frame (ORF) of 581 amino acids, potentially encoding for a gag protein and parts of the protease and integrase proteins. Vine-1 is most likely related to the copia-like type family, but with no significant similarity to any previously described plant retrotransposon or inserted element, nor to any eukaryotic element described to date. Vine-1 element has been found in Adhr at the same location in different V. vinifera cultivars, but not in some other analyzed Vitis species. These data suggest that Vine-1 insertion in Adhr is specific to V. vinifera, and has occurred after the Adh isogene separation, but prior to cultivar development. Sequences related to Vine-1 were revealed in multiple copies in the V. vinifera genome and, to a lesser extent, in other analyzed Vitis species. The polymorphism observed prompts us to question the role played by transposition in the evolution of the Vitis genus.     

Microphthalmia (mi) mice display an aberrant bone trace element composition

It has been recognized that bone trace element composition analysis provides clues when analyzing bone-related physiological conditions. Increasing numbers of bone-related genetic diseases have been identified recently. In this study, we have analyzed bone trace element composition in a genetic mutant animal model. Mutations in the mouse microphthalmia (mi) gene affect the development of a number of cell types, including melanocytes, mast cells, and osteoclasts. Previous studies have shown that different alleles of the mi locus show osteopetrosis. In order to gain insights into the effects of a particular genetic defect on bone trace element composition and bone structure, we performed bone trace element composition analysis using inductively coupled plasma atomic emissions spectrometry (ICP-AES). Marked changes in bone trace element levels were found in vertebrate bones of mi mutant mice. The implications and possible applications of bone trace element analysis will be discussed in this article.     

Viscoelastic nature of isolated tomato (Solanum lycopersicum) fruit cuticles: a mathematical model

Viscoelastic behaviour of isolated tomato fruit cuticle (CM) is well known and extensively described. Temperature and hydration conditions modify the mechanical properties of CM. Mechanical data from previous transient‐creep analysis developed in tomato fruit cuticle under different temperature and hydration conditions have been used to propose a rheological model that describes the viscoelastic nature of CM. As a composite material, the biomechanical behaviour of the plant cuticle will depend not only on the mechanical characteristics of the individual components by themselves but also on the sum of them. Based on this previous information, we proposed a two‐element model to describe the experimental behaviour: an elastic hookean element connected in parallel to a viscous element or Voigt element that will describe the mechanical behaviour of the isolated CM and cutin under the studied conditions. The main parameters of the model, E₁ and E₂ will reflect the elastic and viscoelastic behaviour of the cuticle. Relationship between these physical parameters and the change in CM properties were discussed in order to elucidate the rheological processes taking place in CM. This model describes both the influence of temperature and hydration and the behaviour of the isolated cutin and the inferred contribution of the cuticle fraction of polysaccharides when the whole cuticle is tested.     

Numerical investigations of rib fracture failure models in different dynamic loading conditions

Rib fracture is one of the most common thoracic injuries in vehicle traffic accidents that can result in fatalities associated with seriously injured internal organs. A failure model is critical when modelling rib fracture to predict such injuries. Different rib failure models have been proposed in prediction of thorax injuries. However, the biofidelity of the fracture failure models when varying the loading conditions and the effects of a rib fracture failure model on prediction of thoracic injuries have been studied only to a limited extent. Therefore, this study aimed to investigate the effects of three rib failure models on prediction of thoracic injuries using a previously validated finite element model of the human thorax. The performance and biofidelity of each rib failure model were first evaluated by modelling rib responses to different loading conditions in two experimental configurations: (1) the three-point bending on the specimen taken from rib and (2) the anterior–posterior dynamic loading to an entire bony part of the rib. Furthermore, the simulation of the rib failure behaviour in the frontal impact to an entire thorax was conducted at varying velocities and the effects of the failure models were analysed with respect to the severity of rib cage damages. Simulation results demonstrated that the responses of the thorax model are similar to the general trends of the rib fracture responses reported in the experimental literature. However, they also indicated that the accuracy of the rib fracture prediction using a given failure model varies for different loading conditions.     

Ultrastructure and composition of the synaptonemal complex in spread and negatively stained spermatocytes of the golden hamster and the albino rat

The ultrastructure of the synaptonemal complex (SC) has been studied in spermatocytes of the golden hamster and the albino rat, spread on liquid surfaces and negatively stained with uranyl acetate. The conditions for a reproducible procedure for spreading the SC have been specified. Spreading on water causes large losses of material from the complex. Spreading on 0.45–0.9% NaCl in water results in good preservation of the SC. Ethanol dehydration introduces irreversible changes in the shape of the chromatin fibers and the components of the complex. Digestions with DNase and proteases, extraction with 2M NaCl and fixation in an aqueous solution of formaldehyde permit analysis of the components of the SC. The lateral elements of the SC are formed by three components: 1) the bulk material which is protease sensitive, DNase resistant, insoluble in 2M NaCl and partially soluble in water; 2) the axial attachment regions of the chromatin fiber; and 3) an axial and linear filament, 65 Å wide, which is DNase sensitive. It is suggested that this linear 65 Å filament contains a single linear DNA molecule to which the chromatin fibers are attached. The central element of the SC is made of fibrillar material, most of which is DNase resistant and protease sensitive. Fibrils 25 Å wide cross the central space and merge with the central element. The cross fibrils and the central element are labile in solutions containing less than 0.45% NaCl. — From the present results and previous data on diplotene axes (Solari, 1970), it is concluded that the lateral elements of the SC of hamster and rat spermatocytes are undivided during pachytene. It is suggested that the singleness of the axes in the lateral elements is based on the presence of a single DNA molecule axially located in the lateral elements, and that the chromatin fibers are symmetrically attached to this DNA molecule.     

Internal viscoelastic loading in cat papillary muscle.

The passive mechanical properties of myocardium were defined by measuring force responses to rapid length ramps applied to unstimulated cat papillary muscles. The immediate force changes following these ramps recovered partially to their initial value, suggesting a series combination of viscous element and spring. Because the stretched muscle can bear force at rest, the viscous element must be in parallel with an additional spring. The instantaneous extension-force curves measured at different lengths were nonlinear, and could be made to superimpose by a simple horizontal shift. This finding suggests that the same spring was being measured at each length, and that this spring was in series with both the viscous element and its parallel spring (Voigt configuration), so that the parallel spring is held nearly rigid by the viscous element during rapid steps. The series spring in the passive muscle could account for most of the series elastic recoil in the active muscle, suggesting that the same spring is in series with both the contractile elements and the viscous element. It is postulated that the viscous element might be coupled to the contractile elements by a compliance, so that the load imposed on the contractile elements by the passive structures is viscoelastic rather than purely viscous. Such a viscoelastic load would give the muscle a length-independent, early diastolic restoring force. The possibility is discussed that the length-independent restoring force would allow some of the energy liberated during active shortening to be stored and released during relaxation.