Solid-phase extraction of tramadol from plasma and urine samples using a novel water-compatible molecularly imprinted polymer

In this study, a novel method is described for the determination of tramadol in biological fluids using molecularly imprinted solid-phase extraction (MISPE) as the sample clean-up technique combined with high-performance liquid chromatography (HPLC). The water-compatible molecularly imprinted polymers (MIPs) were prepared using methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker, chloroform as porogen and tramadol as template molecule. The novel imprinted polymer was used as a solid-phase extraction (SPE) sorbent for the extraction of tramadol from human plasma and urine. Various parameters affecting the extraction efficiency of the polymer have been evaluated. The optimal conditions for the MIP cartridges were studied. The MIP selectivity was evaluated by checking several substances with similar molecular structures to that of tramadol. The limit of detection (LOD) and limit of quantification (LOQ) for tramadol in urine samples were 1.2 and 3.5 μg L⁻¹, respectively. These limits for tramadol in plasma samples were 3.0 and 8.5 μg L⁻¹, respectively. The recoveries for plasma and urine samples were higher than 91%.     

Interdigitated capacitive biosensor based on molecularly imprinted polymer for rapid detection of Hev b1 latex allergen

Allergen protein detection was performed by a surface imprinted layer combined with an interdigitated capacitance (IDC) transducer that allowed label-free measurements. The immobilized imprinted polymers are the probes that bind to rubber allergen proteins extracted from products such as rubber gloves. Copolymers made from methacrylic acid–vinylpyrrolidone–dihydroxyethylene-bisacrylamide (MAA–NVP–DHEBA) are soluble in aqueous solution and eliminate the denaturation of protein. When deposited as a coating onto an IDC microelectrode transduction system, such materials lead to sensors that produce capacitance responses that are clearly dependent on the concentration of the latex protein (10–900 ng ml⁻¹) in pH 7.4 buffer. The biosensor can detect Hev b1 within minutes and with a detection limit of 10 ng ml⁻¹. Different but related hevein allergenic proteins isolated from natural rubber latex from the rubber tree (Hev b1, Hev b2, and Hev b3) were distinguished by the imprinted material, depending on the dimension and conformation of these proteins with a selectivity factor of 4. They recognized Hevea latex proteins better than non-Hev b proteins, such as lysozyme, ovalbumin, and bovine serum albumin, by a factor of 2. Moreover, the sensor exhibited good operational stability of up to 180 days when used continuously at room temperature.     

Synthesis of a molecularly imprinted polymer for the solid‐phase extraction of betulin and betulinic acid from plane bark

Introduction – Plant extracts are usually complex mixtures of various polarity compounds and their study often includes a purification step, such as solid‐phase extraction (SPE), to isolate interest compounds prior analytical investigations. Molecularly imprinted polymers (MIPs) are a new promising type of SPE material which offer tailor‐made selectivity for the extraction of trace active components in complex matrices. Numerous specific cavities that are sterically and chemically complementary of the target molecules, are formed in imprinted polymers. A molecularly imprinted polymer (MIP) was synthesised in order to trap a specific class of triterpene, including betulin and betulinic acid from a methanolic extract of plane bark. Methodology – Imprinted polymers were synthesised by thermal polymerisation of betulin as template, methacrylic acid (MAA) or acrylamide (AA) as functional monomer, ethylene glycol dimethacrylate as crosslinking agent and chloroform as porogen. Afterwards, MAA‐ and AA‐MIPs were compared with their non‐imprinted polymers (NIPs) in order to assess the selectivity vs betulin and its derivatives. Recovered triterpenes were analysed by HPLC during MIP‐SPE protocol. Results – After SPE optimisation, the MAA‐imprinted polymer exhibited highest selectivity and recovery (better than 70%) for betulin and best affinity for its structural analogues. Thus, a selective washing step (chloroform, acetonitrile) removed unwanted matrix compounds (fatty acids) from the SPE cartridge. The elution solvent was methanol. Finally, the MAA‐MIP was applied to fractionate a plane bark methanolic extract containing betulin and betulinic acid. Conclusion – This study demonstrated the possibility of direct extraction of betulin and its structural analogues from plant extracts by MIP technology. Copyright © 2009 John Wiley & Sons, Ltd.     

Screening combinatorial libraries of molecularly imprinted polymer films casted on membranes in single-use membrane modules

A new and fast technique for screening combinatorial libraries of molecularly imprinted polymers is presented. The procedure is based on commercially available membrane modules which are rinsed with pre-polymerization imprinting mixtures. After the in situ polymerization and generation of MIP films on the PTFE membranes within the modules, the membranes are evaluated in terms of affinity towards the target molecule (template) R-(-)-phenylbutyric acid. Therefore, after template extraction from the freshly produced membranes a solution of this target molecule is flushed through the module. By analyzing the remaining analyte concentration in the permeate, the amount of analyte adsorbed on the membrane can be calculated and related to specific interactions with the molecular imprints. By this means, optimized recipes in terms of cross-linker to template ratios could be obtained in combination with the optimal porogen, when screening p-divinylbenzene or ethylene glycol dimethacrylate as cross-linker and porogens like acetonitrile, dimethylsulfoxide and methanol.     

Loss of apical monocilia on collecting duct principal cells impairs ATP secretion across the apical cell surface and ATP-dependent and flow-induced calcium signals

Renal epithelial cells release ATP constitutively under basal conditions and release higher quantities of purine nucleotide in response to stimuli. ATP filtered at the glomerulus, secreted by epithelial cells along the nephron, and released serosally by macula densa cells for feedback signaling to afferent arterioles within the glomerulus has important physiological signaling roles within kidneys. In autosomal recessive polycystic kidney disease (ARPKD) mice and humans, collecting duct epithelial cells lack an apical central cilium or express dysfunctional proteins within that monocilium. Collecting duct principal cells derived from an Oak Ridge polycystic kidney (orpk ( Tg737 ) ) mouse model of ARPKD lack a well-formed apical central cilium, thought to be a sensory organelle. We compared these cells grown as polarized cell monolayers on permeable supports to the same cells where the apical monocilium was genetically rescued with the wild-type Tg737 gene that encodes Polaris, a protein essential to cilia formation. Constitutive ATP release under basal conditions was low and not different in mutant versus rescued monolayers. However, genetically rescued principal cell monolayers released ATP three- to fivefold more robustly in response to ionomycin. Principal cell monolayers with fully formed apical monocilia responded three- to fivefold greater to hypotonicity than mutant monolayers lacking monocilia. In support of the idea that monocilia are sensory organelles, intentionally harsh pipetting of medium directly onto the center of the monolayer induced ATP release in genetically rescued monolayers that possessed apical monocilia. Mechanical stimulation was much less effective, however, on mutant orpk collecting duct principal cell monolayers that lacked apical central monocilia. Our data also show that an increase in cytosolic free Ca(2+) primes the ATP pool that is released in response to mechanical stimuli. It also appears that hypotonic cell swelling and mechanical pipetting stimuli trigger release of a common ATP pool. Cilium-competent monolayers responded to flow with an increase in cell Ca(2+) derived from both extracellular and intracellular stores. This flow-induced Ca(2+) signal was less robust in cilium-deficient monolayers. Flow-induced Ca(2+) signals in both preparations were attenuated by extracellular gadolinium and by extracellular apyrase, an ATPase/ADPase. Taken together, these data suggest that apical monocilia are sensory organelles and that their presence in the apical membrane facilitates the formation of a mature ATP secretion apparatus responsive to chemical, osmotic, and mechanical stimuli. The cilium and autocrine ATP signaling appear to work in concert to control cell Ca(2+). Loss of a cilium-dedicated autocrine purinergic signaling system may be a critical underlying etiology for ARPKD and may lead to disinhibition and/or upregulation of multiple sodium (Na(+)) absorptive mechanisms and a resultant severe hypertensive phenotype in ARPKD and, possibly, other diseases.     

A molecular dynamics simulation of the structure and properties of a self assembled monolayer formed from an amphiphilic polymer on a water surface

The polymer poly (3-octyl-3′-oxanoyl thiophene) has alternating hydrophobic octyl and hydrophilic oxanoyl side chains in the “3” positions of the thiophene rings, rendering it an interesting amphiphilic electro-active material. The application of compression on the amphiphilic polymer (which forms self-assembled monolayers (SAMs) on a water surface) is investigated by molecular dynamics (MDs). It is found that there is a range of surface pressures in which the material possesses lattice order. As the compression is increased beyond a critical value breakdown occurs leading to the rupture of the surface layer. The results of the dynamics are interpreted via atomic plots, atom-pair radial distribution functions (RDF), torsional distribution functions and by monitoring some of the dihedral angles as functions of time.     

Reduction of calcium flux from the extracellular region and endoplasmic reticulum by amorphous nano-silica particles owing to carboxy group addition on their surface

Several studies have reported that amorphous nano-silica particles (nano-SPs) modulate calcium flux, although the mechanism remains incompletely understood. We thus analyzed the relationship between calcium flux and particle surface properties and determined the calcium flux route. Treatment of Balb/c 3T3 fibroblasts with nano-SPs with a diameter of 70 nm (nSP70) increased cytosolic calcium concentration, but that with SPs with a diameter of 300 or 1000 nm did not. Surface modification of nSP70 with a carboxy group also did not modulate calcium flux. Pretreatment with a general calcium entry blocker almost completely suppressed calcium flux by nSP70. Preconditioning by emptying the endoplasmic reticulum (ER) calcium stores slightly suppressed calcium flux by nSP70. These results indicate that nSP70 mainly modulates calcium flux across plasma membrane calcium channels, with subsequent activation of the ER calcium pump, and that the potential of calcium flux by nano-SPs is determined by the particle surface charge.