In this paper, a plasma based metamaterial (MM) polarizer is optimized for linear to circular polarization conversion in Ku-band wireless applications. The plasma MM polarizer is design based on the transmission mode. The proposed plasma MM polarizer unit-cell element consists of back-to-back plasma arcs placed on the top and the bottom faces of a dielectric substrate. Polarization Conversion from linear polarized (LP) wave to circular polarized (CP) wave requires that the incident wave is splitted into two orthogonal components with equal magnitudes and π/2 phase difference. The polarization characteristics of the plasma MM polarizer have bandwidth of 17.5% centered around 13.7 GHz. A linearly polarized dielectric resonator antenna (DRA) is designed with impedance bandwidth of 27.05%. The LP-DRA loaded with plasma MM polarizer radiates CP-waves with improved gain of 8.89 dBi. Reconfigurable CP radiation right-hand, left-hand, or linear polarization is achieved when the argon gas in the lower, upper, or both arc-shaped containers is ionized to plasma state. The proposed plasma MM polarizer and the DRA structures are examined utilizing a full-wave simulator.
相似文献A novel design of elliptic cylindrical nanowire hybrid plasmonic waveguide (ECNHPW)–based polarization beam splitter (PBS) is proposed. In the proposed design, the ECNHPW arm acts as an input port and a bar port; on the other hand, a regular silicon wire (RSW) arm acts as a cross port. By selecting the physical parameters of the proposed PBS accurately, the transverse electric (TE) mode is merely satisfied with the phase-matching condition. In contrast, the transverse magnetic (TM) mode does not propagate to the RSW arm. Consequently, the TM input mode goes directly to the ECNHPW arm, while the TE input mode in ECNHPW is coupled with RSW arm. As a result, the two different polarization modes are meritoriously separated, and they pass through two different arms. For the proposed PBS, the insertion loss (IL) of both polarizations lies below 1 dB. For TE input, the value of the polarization extinction ratio (PER) is 27.2 dB, and for TM input, it is 23.9 dB at 1550 nm operating wavelength. Further optimization is implemented by varying the wavelength, thickness of SiO2, and the gap between the waveguides using the finite element method (FEM). The proposed PBS is designed with 150 nm bandwidth, high PER, and low IL, which can be suitable for photonic integrated circuits (PICs).
相似文献A dielectric metamaterial absorber has been proposed, which consists of fractal-like structure and conductive sheet. The fractal-like structure is made by the high permittivity dielectric and also is covered by the conductive sheet. Absorptivity of such a dielectric metamaterial absorber is 99.1%, which can be found at 10.196 GHz; meanwhile, the absorber is polarization insensitive. To enhance the bandwidth of absorber, a novel absorber also is proposed, whose bandwidth is 0.566 GHz, which ranges from 9.752 to 10.318 GHz, and relative bandwidth is 5.64%. The maximum absorptivity can reach to 99.8%, and the proposed absorber also is polarization insensitive. In the meantime, the absorber shows excellent performance which is incident angle insensitive; when the incident angle is increased to 70°, the absorptivity is larger than 75%.
相似文献In this article, the design of a frequency reconfigurable broadband THz antenna based on vanadium dioxide (VO2) is investigated. Instead of being fed by the microstrip line directly, a windmill-shaped feeding structure is designed to provide a proximity-coupled feeding method. Many modes with contiguous resonant frequencies can be excited to obtain the wideband performance. The proposed antenna combines gold with metamaterial VO2. Thanks to insulator-metal phase transition characteristic of VO2 at phase transition temperature (68 °C), we can change the length of the resonant branches to realize frequency reconfiguration by changing the external temperature (T). The simulated results illustrate that when T = 50 °C (State I), such an antenna has a bandwidth of 35.2% (7.01–10 THz) with S11 below − 10 dB, and a maximum gain of 6.62 dBic. When T = 80 °C (State II), it has a bandwidth of 21.8% (5.77–7.18 THz) with S11 below − 10 dB, and a maximum gain of 4.49 dBic. Thus, we realize a design of a proximity-coupled antenna with reconfigurable wideband over the THz band.
相似文献In this paper, a tri-layer metamaterial composed of a split-disk structure array sandwiched with two layers of twisted sub-wavelength metal grating is proposed and investigated numerically in terahertz region. The numerical results exhibit that linear polarization conversion via diode-like asymmetric transmission for terahertz waves within ultra-broadband frequency range is achieved due to Fabry-Perot-like resonance. In our design, the conversion polarization transmission coefficient for normal incidence is greater than 90 % in the range of 0.23–1.17 THz, equivalent to 134.3 % relative bandwidth. The physical mechanism of the broadband linear polarization conversion effect is further illustrated by simulated electrical field distributions.
相似文献The polarization characteristics of high-birefringence photonic crystal fiber (HB-PCF) selectively coated with silver layers are numerically investigated using the full-vector finite element method (FEM). The fundamental mode coupling properties and polarization splitting effect are discussed in detail. Results show that the resonance wavelength, resonance strength, and splitting distance between two polarized modes can be adjusted significantly by changing the fiber structure, the diameter of silver rings, and the thickness of silver layers. A single-polarization filter at 1310 nm bands is proposed with the corresponding loss 500 dB/cm and full width half maximum (FWHM) only 23 nm. This work is very helpful for further studies in polarization-dependent wavelength-selective applications or other fiber-based plasmonic devices.
相似文献This paper presents a highly birefringence (Hi-Bi) photonic crystal fiber (PCF)-based single-polarization filter, which consists of copper microwires. Copper is chemically stable and the use of microwires is benefit to fabricate than any metal-coated PCF. The filter characteristics are inspected by the full-vector finite element method (FEM). The proposed filter can filter out y-polarized mode, while the x-polarized mode can be guided. The confinement loss of the y-polarized mode at the wavelength of 1.31 μm is achieved of 696.79 dB/cm, while the x-polarized loss is only 4.34 dB/cm. According to numerical results, 20 dB bandwidth of the proposed filter with a maximum value of crosstalk of 601.37 dB is achieved of 650 nm that range from 1.1 to 1.75 μm. Furthermore, the insertion loss of the guided mode (x-polarization) is as low as 0.142 dB for 1 mm of fiber length. Moreover, by optimizing the structural parameters, it has shown that the proposed filter can be effective at any wavelength at the optical communication window.
相似文献The steering of guided light in surface plasmon resonance (SPR) sensing platforms introduced more than eight decades ago from the first proposed optical sensor in 1983. However, sensing the environmental variation considering transverse modes is still require the attention from the scientist. Here, for the first time, by considering steering of guided light a high-performance SPR sensor base on Otto structure is proposed. By incorporating the graphene and white graphene in to a prism-waveguide configuration, we calculated the excitation of both TE(TM) modes as refractive index is changed from 1 to 1.04. to analysis of the structure finite-difference time-domain (FDTD) is applied. To benchmark of the structure performance parameters including sensitivity, figure of merit, polarization extinction ratio (PER), and insertion loss (IL) are calculated. Numerical results show that maximum sensitivity and figure of merit are obtained for TM modes of 1226 and 27 respectively. In such a case, graphene monolayer is applied. By considering coupling condition, at the μc?=?0.4 eV, the maximum value of PER is 75 dB, and IL is 0.022 dB. Moreover, it is obtained that in all these conditions PER is higher than 8 dB, and IL is less than 0.04 dB.
相似文献A polarization filter that has a novel photonic crystal fiber structure of semi-hourglass part and Au-coated film is proposed. We simulated the performance of the structure by the finite element method. The numerical simulation results show that altering the structure parameters and the thickness of Au film can lead to an optimal parameter combination with remarkable features, owing to the semi-hourglass part that induced huge asymmetry factor into the structure. On the one hand, when the thickness of Au film is controlled to be 18.7 nm, we can get the confinement loss 1304.02 dB/cm and 3.96 dB/cm on y-polarization and x-polarization respectively at λ = 1.55 μm. On the other hand, controlling the thickness to 35 nm, the confinement loss on y-polarization and x-polarization is 848.87 dB/cm and 1.31 dB/cm respectively at λ = 1.31 μm. In addition, the bandwidth with crosstalk smaller than − 20 dB is 680 nm and 800 nm at λ = 1.55 μm and 1.31 μm, respectively, when the fiber length is 500 μm. This structure, as a reference, can provide a new idea when designing a photonic crystal fiber structure applied in optical communication and sensor system.
相似文献A tunable spoof surface plasmons antenna using sinusoidally modulated corrugated reactance surface based on a bulleye structure is proposed in this paper. The designed antenna is made of concentric metallic grooves etched on a metal plate, the depth of which is of sinusoidal periodic variation in the radial direction. This makes it possible that highly confined spoof surface plasmons along corrugated surface can be converted to radiation modes. The proposed bulleye antenna can work from 25.8 to 33 GHz and a bandwidth of 7.2 GHz and its main lobe can be directed at 30∘ from the vertical direction at 30 GHz. This antenna has a maximum gain of 15 dB and its main lobe can scan from 14∘ to 58∘ by tuning the frequency from 28 to 32 GHz.
相似文献Owing to the unique properties of strongly confined and enhanced electric fields, surface plasmon polaritons (SPPs) provide a new platform for the realization of ultracompact plasmonic circuits. However, there are challenges in coupling light into SPPs efficiently and subsequently routing SPPs. Here, we propose a multi-directional SPP splitter and polarization analyzer based on the catenary metasurface. Based on the abundant electromagnetic modes and geometric phase modulation principle of catenary structure, the device has realized high-efficiency beam splitting for four different polarization states (x-polarization, y-polarization, LCP, and RCP). The central wavelength of the device is 632 nm and the operation bandwidth can reach 70 nm (585–655 nm). Based on the phenomenon of SPP beam splitting, we present a prototype of a polarization analyzer, which can detect the polarization state of incident light by adding photodetector with light intensity logic threshold in four directions. Moreover, by combining this device with dynamic polarization modulation techniques, it is possible to be served as a router or switch in integrated photonic circuits.
相似文献In the fields of communication and sensing, resonance bandwidth is a very critical index. It is very meaningful to implement a broadband resonance device with a simple metamaterial structure in the terahertz band. In this paper, we propose a simple metamaterial structure which consists of one horizontal metal strip and two vertical metal strips. This structure can achieve an electromagnetically induced transparency-like (EIT-like) effect in the frequency range of 0.1~3.0 THz to obtain a transparent window with a resonance bandwidth as high as 1.212 THz. When the relative distance between two vertical metal strips is changed, the bandwidth can be effectively controlled. Furthermore, we found that the EIT-like effect can be actively adjusted by replacing vertical metal strips with photosensitive silicon.
相似文献A micro Sagnac interferometer is proposed for electron cloud distributed sensors formed by an integrated (micro-electro-mechanical systems) MEMS resonator structure. The Sagnac interferometer consists of four microring probes integrated into a Sagnac loop. Each of the microring probes is embedded with the silver bars to form the plasmonic wave oscillation. The polarized light of 1.50 µm wavelength is input into the interferometer, which is polarized randomly into upstream and downstream directions. The polarization outputs can be controlled by the space–time input at the Sagnac port. Electrons are trapped and oscillated by the whispering gallery modes (WGMs), where the plasmonic antennas are established and applied for wireless fidelity (WiFi) and light fidelity (LiFi) sensing probes, respectively. Four antenna gains are 2.59 dB, 0.93 dB, 1.75 dB, and 1.16 dB, respectively. In manipulation, the sensing probe electron densities are changed by input source power variation. When the electron cloud is excited by the microscopic medium, the change in electron density is obtained and reflected to the required parameters. Such a system is a novel device that can be applied for brain-device interfering with the dual-mode sensing probes. The obtained WGM sensors are 1.35 µm?2, 0.90 µm?2, 0.97 µm?2, and 0.81 µm?2, respectively. The WGMs behave as a four-point probe for the electron cloud distributed sensors, where the electron cloud sensitivities of 2.31 prads?1mm3 (electrons)?1, 2.27 prads?1mm3 (electrons)?1, 2.22 prads?1mm3(electrons)?1, and 2.38 prads?1mm3(electrons)?1 are obtained, respectively.
相似文献We study the polarization properties of suspended core microstructured optical fibers (SC-MOFs) with hexagonal lattice structure and high air-filling fraction having a single gold-filled hole along the horizontal axis. The interaction between the core-guided light and metal leads to surface plasmon resonance (SPR) at particular frequencies where the phase-matching condition is satisfied. We observe from the modal analysis that MOFs with high air-filling fraction offer the possibility of coupling of the fundamental mode with the first-order surface plasmon polariton (SPP) mode. With the increase in the suspension factor (SF), the fundamental mode couples with higher order SPP modes and the coupling strength also enhances. It also leads to an increase in modal birefringence. Reduction in beat length by an order of magnitude compared to the reported values is being reported for the first time to our knowledge. We have achieved the lowest beat length of 0.0105 mm at 1 μm wavelength for the structure having d/Λ = 0.85 and SF = 1.65. The results show that such plasmonic SC-MOFs may perform as efficient in-fiber polarizers and polarization filters.
相似文献Characteristic improvements of photon/plasmon detectors have been the subject of several investigations in the area of plasmonic integrated circuits. Among different suggestions, silicon-based metal-semiconductor-metal (MSM) waveguides are one of the most popular structures for the implementation of high-quality photon/plasmon detectors in infrared wavelengths. In this paper, an integrated silicon-germanium (SiGe) core MSM plasmon detector is proposed to detect λ = 1550 nm with internal photoemission mechanism. Performance characteristics of the new sub-micron device are simulated with a simplified hydrodynamic model. In a specific bias point (V = 3 V and the incident optical power of 0.31 mW), the output current is 404.3 μA (276 μA detection current and 128.3 μA dark current), responsivity is 0.89 A/W, and the 3-dB electrical bandwidth is 120 GHz. Simulation results for the proposed plasmon detector, in comparison with the empirical results of a reported Si-based MSM device, demonstrate considerable responsivity enhancement.
相似文献A three-dimensional cross-shaped fractal metamaterial absorber with ultra-wide wavelength band, polarization-independence and wide-angle, is numerically investigated by the finite-difference time-domain method. In this absorber, the solar energy is trapped by the cross-shaped fractal of the upper layer, and the Si-ring filled with iron in the middle layer and the wavelength band can be broadened by the self-similarity of fractal structure. The absorber exhibits absorptivity higher than 91% for the wavelengths from 400 to 2000 nm and an absorption bandwidth of about 133%. Furthermore, the proposed absorber realizes polarization independence, and the maximum incident angle is 76°. However, as the iron material applied in the nano-metamaterial absorber (NMA) can be easily oxidized and rusted, it is replaced by nickel with characteristics such as corrosion resistance and high-temperature resistance; thus, an improved NMA is obtained. The improved absorber not only eliminates the corrosion-prone defects of the above proposed structure but also maintains polarization independence and high absorption and widens the angle of incidence up to 79° and thereby can be applied in many areas, such as solar energy harvesting.
相似文献A single-polarization photonic crystal fiber (PCF) based on surface plasmon resonance (SPR) is proposed. Finite element method is employed in simulating the PCF with gold-coated. The resonance wavelength can be modulated by changing the thickness of gold layer. At the resonance wavelength 1.55 μm, the loss of y-polarized mode is much larger than the loss of x-polarized mode. When the fiber length is set to 2 mm, the value of extinction ratio reaches to −118.7 dB, the y-polarized mode is suppressed and only x-polarized mode can be guided. The fiber is applicable in the production of single-polarization filter. The PCF has a simple structure and a big error tolerance, it has a good practicability.
相似文献