Plastic value chain and performance metric framework for optimal recycling

Despite the promotion of plastic recycling to sustainably manage plastic waste and advance the circular economy, existing plastic recycling systems globally are largely experiencing low performance and growth. To transition to world-class plastic material recycling and circularity, defining the metrics that impact the performance of a plastic recycling system is crucial. Bringing together existing literature, this study developed a conceptual framework, comprised of eight key performance metrics, for benchmarking recycling success or assessing the degree to which the performance of any plastic recycling system is optimal. Through a value chain approach, the specific performance metrics relevant to each stage of the plastic recycling system, their objectives, and the actors characterizing the system were analyzed in detail. Also, specific maturity models were developed to measure the performance of any plastic recycling system. This framework provides essential knowledge for related stakeholders to inform further development of plastic recycling and a circular economy.     

Biofilm and Diatom Succession on Polyethylene (PE) and Biodegradable Plastic Bags in Two Marine Habitats: Early Signs of Degradation in the Pelagic and Benthic Zone?

The production of biodegradable plastic is increasing. Given the augmented littering of these products an increasing input into the sea is expected. Previous laboratory experiments have shown that degradation of plastic starts within days to weeks. Little is known about the early composition and activity of biofilms found on biodegradable and conventional plastic debris and its correlation to degradation in the marine environment. In this study we investigated the early formation of biofilms on plastic shopper bags and its consequences for the degradation of plastic. Samples of polyethylene and biodegradable plastic were tested in the Mediterranean Sea for 15 and 33 days. The samples were distributed equally to a shallow benthic (sedimentary seafloor at 6 m water depth) and a pelagic habitat (3 m water depth) to compare the impact of these different environments on fouling and degradation. The amount of biofilm increased on both plastic types and in both habitats. The diatom abundance and diversity differed significantly between the habitats and the plastic types. Diatoms were more abundant on samples from the pelagic zone. We anticipate that specific surface properties of the polymer types induced different biofilm communities on both plastic types. Additionally, different environmental conditions between the benthic and pelagic experimental site such as light intensity and shear forces may have influenced unequal colonisation between these habitats. The oxygen production rate was negative for all samples, indicating that the initial biofilm on marine plastic litter consumes oxygen, regardless of the plastic type or if exposed in the pelagic or the benthic zone. Mechanical tests did not reveal degradation within one month of exposure. However, scanning electron microscopy (SEM) analysis displayed potential signs of degradation on the plastic surface, which differed between both plastic types. This study indicates that the early biofilm formation and composition are affected by the plastic type and habitat. Further, it reveals that already within two weeks biodegradable plastic shows signs of degradation in the benthic and pelagic habitat.     

聚氨酯塑料的微生物降解

未被合理处置的废塑料污染已成为全球性的环境问题,探索塑料废弃物的无害化处理技术势在必行。近来,研究证实了自然界中存在可以降解塑料的微生物及酶。利用微生物或酶对废塑料进行生物处理成为可能。聚氨酯塑料(Polyurethane,PUR)是广泛应用的通用塑料之一,其废弃物量已占到所有废塑料总体积的30%。文中将PUR塑料发明应用70年来有关微生物降解的研究进行了全面综述,对PUR塑料降解真菌、细菌、降解基因与酶、降解产物及相关的生物处理技术系统等进行了总结与分析,并对实现PUR废塑料高效生物处理需解决的关键科学问题进行了展望。     

生物降解地膜应用与地膜残留污染防控

地膜是农业生产中重要的生产资料之一,过去30多年,地膜用量和农作物覆膜面积一直稳定增长,2014年地膜用量达到了144万t,覆膜面积超过1 800万hm~2,该技术对保障我国农产品安全供给作出了重大贡献。与此同时,地膜残留污染问题越来越严重,一些农田的地膜残留量超过250 kg/hm~2,在我国西北的局部区域,地膜残留已经对农田土壤、作物生长发育、农事作业等造成严重影响和危害。生物降解地膜成为替代普通PE地膜、解决地膜残留污染的一种有效措施和手段,目前生物降解地膜正处于产品研发和评价试验的关键阶段,部分生物降解地膜产品在马铃薯、花生、烟草生产上显示出良好的效果,但总体上还面临巨大挑战,主要包括需要进一步提高地膜产品质量,提高地膜产品破裂和降解可控性,改善地膜的增温保墒能力,实现满足农作物对地膜覆盖功能的要求;此外,需要降低生物降解地膜综合成本,促进生物降解地膜规模化应用。总体上,随着技术进步和农业生产环境的变化,生物降解地膜应用将具有良好的前景。     

Replicated evolution of integrated plastic responses during early adaptive divergence

Colonization of a novel environment is expected to result in adaptive divergence from the ancestral population when selection favors a new phenotypic optimum. Local adaptation in the new environment occurs through the accumulation and integration of character states that positively affect fitness. The role played by plastic traits in adaptation to a novel environment has generally been ignored, except for variable environments. We propose that if conditions in a relatively stable but novel environment induce phenotypically plastic responses in many traits, and if genetic variation exists in the form of those responses, then selection may initially favor the accumulation and integration of functionally useful plastic responses. Early divergence between ancestral and colonist forms will then occur with respect to their plastic responses across the gradient bounded by ancestral and novel environmental conditions. To test this, we compared the magnitude, integration, and pattern of plastic character responses in external body form induced by shallow versus open water conditions between two sunfish ecomorphs that coexist in four postglacial lakes. The novel sunfish ecomorph is present in the deeper open water habitat, whereas the ancestral ecomorph inhabits the shallow waters along the lake margin. Plastic responses by open water ecomorphs were more correlated than those of their local shallow water ecomorph in two of the populations, whereas equal levels of correlated plastic character responses occurred between ecomorphs in the other two populations. Small but persistent differences occurred between ecomorph pairs in the pattern of their character responses, suggesting a recent divergence. Open water ecomorphs shared some similarities in the covariance among plastic responses to rearing environment. Replication in the form of correlated plastic responses among populations of open water ecomorphs suggests that plastic character states may evolve under selection. Variation between ecomorphs and among lake populations in the covariance of plastic responses suggests the presence of genetic variation in plastic character responses. In three populations, open water ecomorphs also exhibited larger plastic responses to the environmental gradient than the local shallow water ecomorph. This could account for the greater integration of plastic responses in open water ecomorphs in two of the populations. This suggests that the plastic responses of local sunfish ecomorphs can diverge through changes in the magnitude and coordination of plastic responses. Although these results require further investigation, they suggest that early adaptive evolution in a novel environment can include changes to plastic character states. The genetic assimilation of coordinated plastic responses could result in the further, and possibly rapid, divergence of such populations and could also account for the evolution of genes of major effect that contribute to suites of phenotypic differences between divergent populations.     

Future focuses of enzymatic plastic degradation

Enzyme-based plastic degradation and valorization of the plastic-derived monomers has emerged as a potent option to address the plastic waste dilemma. Obstacles in implementing the enzymatic degradation of plastics in industry are here summarized, and strategies to overcome these obstacles are discussed to exploit the full potential of enzymatic plastic degradation toward a sustainable plastic economy.     

Degradation of Oxo-Biodegradable Plastic by Pleurotus ostreatus

Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ultraviolet light (UV) or heat can lead to breakage of the polymer chains in the plastic, and the resulting compounds are easily degraded by microorganisms. However, few studies have characterized the microbial degradation of oxo-biodegradable plastics. In this study, we tested the capability of Pleurotus ostreatus to degrade oxo-biodegradable (D₂W) plastic without prior physical treatment, such as exposure to UV or thermal heating. After 45 d of incubation in substrate-containing plastic bags, the oxo-biodegradable plastic, which is commonly used in supermarkets, developed cracks and small holes in the plastic surface as a result of the formation of hydroxyl groups and carbon-oxygen bonds. These alterations may be due to laccase activity. Furthermore, we observed the degradation of the dye found in these bags as well as mushroom formation. Thus, P. ostreatus degrades oxo-biodegradable plastics and produces mushrooms using this plastic as substrate.     

DRGs, costs, and outcome for plastic surgical patients

The purpose of this study was to analyze hospital cost, resource utilization, and outcome by age for a large group of hospitalized plastic surgical patients using the DRG format. Hospital cost per patient for all plastic surgical admissions (both inpatient and potentially ambulatory patients) treated (N = 1632) at an academic medical center increased with age and peaked for plastic surgical patients 75 to 80 years of age ($11,585 per patient). Although DRG payment would have produced an aggregate profit of $2,404,854, older plastic surgical patients (65 years of age and above) generally produced losses. Older plastic surgical patients demonstrated a longer hospital length of stay, a greater severity of illness, a higher percent of outliers, and a greater mortality than younger plastic surgical patients. In addition, older plastic surgical patients had higher clinical resource utilization based on a number of clinical parameters such as emergency admission, SICU utilization, need for blood transfusions, and need for plasma product infusions. This study suggests that the current DRG reimbursement methodology may be inequitable vis-à-vis the older plastic surgical patient. As additional pressures encourage the performance of more ambulatory procedures (previously performed as inpatients), our profit margins may decline and possibly affect our ability to provide quality plastic surgical care.     

半干旱雨养区不同覆膜方式对冬小麦土壤水分利用及产量的影响

在黄土高原半干旱雨养条件下,于2008—2009、2009—2010两个年度,以露地种植为对照(CK),研究了不同覆膜方式(全膜覆土穴播,全膜穴播,垄膜沟播)对旱地冬小麦产量和水分利用的影响。结果表明:两年度覆膜平均较CK产量分别显著提高49.4%和53.2%,水分利用效率提高11.8%和14.3%。覆膜的高产建立在高生长量、高耗水基础上,产量与生育期耗水量显著正相关(r=0.952*—0.958*),两年度覆膜分别平均较CK多耗水33.5%和34.1%。覆膜处理中以全膜穴播较CK的增产幅度和WUE提高幅度最大,耗水量也最大。由于覆膜耗水量大,覆膜各处理收获期0—200 cm土壤贮水量均显著低于CK,但通过全年连续覆膜和夏闲期降水补充,在下茬秋播时,覆膜各处理0—200 cm土壤贮水量均超过CK,夏闲期覆膜的水分休闲效率两年度分别平均高出CK 41.8和86.4个百分点,覆膜有利于土壤水分恢复和下茬作物的可持续生产。覆膜方式中,以全膜覆土穴播种植效益最高,两个年度纯收益平均达5531.6元/hm2,较CK增收2542.2元/hm2。综合考虑,全膜覆土穴播是一种高产高效兼顾、操作简单、适宜于半干旱雨养区推广应用的冬小麦覆膜种植方式。     

Quality Assessment and Circularity Potential of Recovery Systems for Household Plastic Waste

Plastic recycling is promoted in the transition toward a circular economy and a closed plastic loop, typically using mass‐based recycling targets. Plastic from household waste (HHW) is contaminated and heterogeneous, and recycled plastic from HHW often has a limited application range, due to reduced quality. To correctly assess the ability to close plastic loops via recycling, both plastic quantities and qualities need to be evaluated. This study defines a circularity potential representing the ability of a recovery system to close material loops assuming steady‐state market conditions. Based on an average plastic waste composition including impurities, 84 recovery scenarios representing a wide range of sorting schemes, source‐separation efficiencies, and material recovery facility (MRF) configurations and performances were assessed. The qualities of the recovered fractions were assessed based on contamination and the circularity potential calculated for each scenario in a European context. Across all scenarios, 17% to 100% of the generated plastic mass could be recovered, with higher source‐separation and MRF efficiencies leading to higher recovery. Including quality, however, at best 55% of the generated plastic was suitable for recycling due to contamination. Source‐separation, a high number of target fractions, and efficient MRF recovery were found to be critical. The circularity potential illustrated that less than 42% of the plastic loop can be closed with current technology and raw material demands. Hence, Europe is still far from able to close the plastic loop. When transitioning toward a circular economy, the focus should be on limiting impurities and losses through product design, technology improvement, and more targeted plastic waste management.     

Plastic Accumulation in the Mediterranean Sea

Concentrations of floating plastic were measured throughout the Mediterranean Sea to assess whether this basin can be regarded as a great accumulation region of plastic debris. We found that the average density of plastic (1 item per 4 m²), as well as its frequency of occurrence (100% of the sites sampled), are comparable to the accumulation zones described for the five subtropical ocean gyres. Plastic debris in the Mediterranean surface waters was dominated by millimeter-sized fragments, but showed a higher proportion of large plastic objects than that present in oceanic gyres, reflecting the closer connection with pollution sources. The accumulation of floating plastic in the Mediterranean Sea (between 1,000 and 3,000 tons) is likely related to the high human pressure together with the hydrodynamics of this semi-enclosed basin, with outflow mainly occurring through a deep water layer. Given the biological richness and concentration of economic activities in the Mediterranean Sea, the affects of plastic pollution on marine and human life are expected to be particularly frequent in this plastic accumulation region.     

The production and assessment of a plastic rod for the Chinese Reference Preparation for Opacity

A reference preparation for opacity consisting of a plastic rod was introduced by Perkins et al. in 1973. It was adopted as the International Reference Preparation for Opacity in 1975. This plastic rod opacity reference preparation has been used to standardize the Chinese National Bacterial Opacity Standard. The material was prepared from plastic sheet by a water-bath method and by a dry-heat method; the sheet was then machined into the plastic rods. We have studied the technical processes and set up methods for the examination of the sheets and rods. The water-bath method was found to be better than the dry-heat method in our tests. Collaborative assays in research institutes of biological products have shown that the plastic rod can replace the glass-powder suspension. The duration of validity of the plastic rod opacity reference preparation and that of the glass-powder suspension used for the Chinese National Bacterial Opacity Standard were studied and found to be similar. For this reason the plastic rod opacity reference preparation has not been widely used in China.     

塑料添加剂向生态环境中的释放与迁移研究进展

塑料废弃物,尤其是粒径小于5 mm的微塑料造成的环境污染问题已引起全球的普遍关注。塑料制品在生产过程中常使用多种添加剂,以提高聚合物的性能并延长其使用寿命。然而,在废弃塑料制品的回收及自然老化过程中,这些添加剂会不断释放出来,对生态环境的安全与人类的健康产生威胁。综述了近年来国内外塑料添加剂的使用情况及其向生态环境释放与迁移等方面的研究进展,具体包括常用塑料添加剂的种类、废弃物塑料回收和塑料老化过程中添加剂向生态环境中的释放与迁移及机制等。未来需要更加关注绿色塑料添加剂的研发、废弃塑料回收工艺的改进以及关于塑料添加剂的释放、在各类环境介质中的迁移转化以及在生态系统各个圈层间的相互作用方面的系统性的研究,并构建相应的迁移模型评估塑料添加剂产生的生态风险。     

New perspectives in plastic biodegradation

During the past 50 years new plastic materials, in various applications, have gradually replaced the traditional metal, wood, leather materials. Ironically, the most preferred property of plastics--durability--exerts also the major environmental threat. Recycling has practically failed to provide a safe solution for disposal of plastic waste (only 5% out of 1 trillion plastic bags, annually produced in the US alone, are being recycled). Since the most utilized plastic is polyethylene (PE; ca. 140 million tons/year), any reduction in the accumulation of PE waste alone would have a major impact on the overall reduction of the plastic waste in the environment. Since PE is considered to be practically inert, efforts were made to isolate unique microorganisms capable of utilizing synthetic polymers. Recent data showed that biodegradation of plastic waste with selected microbial strains became a viable solution.     

一种采集水稻二化螟卵(块)的高效简便新方法

比较了二化螟Chilosuppressalis卵块的塑料袋收集法和稻株法。结果表明 ,塑料袋法和稻株法收集的卵粒总数及卵孵化率都没有显著的差异 ,均为 2 79粒卵 雌蛾和 95 %。塑料袋法收集的卵块数较稻株法的多 ,但小卵块比例较高 ( <1 0 0粒卵 卵块 )。还讨论了采用塑料袋法收集二化螟及其它昆虫卵的优点。     

Nanoindentation hardness of mineralized tissues

A series elastic and plastic deformation model [Sakai, M., 1999. The Meyer hardness: a measure for plasticity? Journal of Materials Research 14(9), 3630–3639] is used to deconvolute the resistance to plastic deformation from the plane strain modulus and contact hardness parameters obtained in a nanoindentation test. Different functional dependencies of contact hardness on the plane strain modulus are examined. Plastic deformation resistance values are computed from the modulus and contact hardness for engineering materials and mineralized tissues. Elastic modulus and plastic deformation resistance parameters are used to calculate elastic and plastic deformation components, and to examine the partitioning of indentation deformation between elastic and plastic. Both the numerical values of plastic deformation resistance and the direct computation of deformation partitioning reveal the intermediate mechanical responses of mineralized composites when compared with homogeneous engineering materials.     

Deposit- and suspension-feeding sea cucumbers (Echinodermata) ingest plastic fragments

Weathering of plastic bottles, bags, fishing line, and other products discarded in the ocean causes tiny fragments to break off. These plastic fragments may accumulate biofilms, sink, and become mixed with sediment, where benthic invertebrates may encounter and ingest them. Here we show that four species of deposit-feeding and suspension-feeding sea cucumbers (Echinodermata, Holothuroidea) not only ingest small (0.25 mm < maximum dimension < 15 mm) nylon and polyvinyl chloride (PVC) fragments along with sediment, but also ingest significantly more plastic fragments than predicted given the ratio of plastic to sand grains in the sediment. During four-hour feeding trials, holothurians ingested between 2- and 20-fold more plastic per individual than expected for PVC fragments, and between 2- and 138-fold more for nylon line. In addition, two species ingested 4 mm diameter PVC pellets. The ecological relevance of plastic ingestion was assessed in the laboratory by counting and characterizing small plastic particles discovered in sediment samples from the same field sites where our holothurians were collected. Substantial numbers of plastic fragments (105 to 214 fragments per liter of sediment) were found in samples from three different locations along the east coast of the U.S.A. In addition, plastic collected from the sediment from two of our field sites was analyzed for polychlorinated biphenyls (PCBs). Plastic from one site tested positive for Aroclor 1254 at a concentration of 0.0106 μg g^-1. While the negative effects of macroscopic marine plastic debris on a host of organisms are well documented, ingestion of small plastic debris by a wide range of benthic organisms, including both primary and secondary consumers, has received little attention. Given that plastics readily adsorb PCBs and other organic pollutants in marine environments, ingestion of plastic from sediment may provide a heretofore-undescribed pathway of exposure for benthic marine invertebrates.     

以生活垃圾堆肥为基质的废弃物铺网草皮建植研究

以生活垃圾堆肥为基质,5种生活废弃物为铺网,对高羊茅、草地早熟禾及本特3种草坪植物的草皮培植与铺坪应用进行了研究.结果表明:(1)在草皮培植中,同种草坪植物在不同铺网草皮中的生长效应差异较大,其中早熟禾在草席与塑料纱网草皮中的综合性能表现较好;本特和高羊茅在竹席和草席中的表现较好.(2)草皮的刈割再生生长能力总体上与草皮培植时的生长状况密切相关,草种与基质、铺网间的协同性存在差异,生长协同性较好的草皮组合为早熟禾的草席草皮、本特的草席与塑料纱网草皮以及高羊茅的草席、纤维网袋与塑料纱网草皮.(3)5种生活废弃物铺网中,塑料薄膜在草皮培植中与各草种间的协同性均最差,其铺网草皮在铺坪应用中的再生生长能力也较差,可见塑料薄膜不适宜作为草皮铺网.     

半干旱黄土高原地区春小麦地膜覆盖研究概述

在黄土高原半干旱地区春小麦上进行的地膜覆盖试验表明,地膜覆盖通过改善耕层土壤生态环境条件,即通过改善水,热状况,活化土壤养分,对提高水分和养分利用效率,实现粮食增产具有重要作用,但近年来在生产实践和科学实验中发现,不合理的长期全生育期地膜覆盖,因在作物生长前期和中期覆膜作物较不覆膜作物生长好,覆膜作物在生长期水分蒸腾损失严重,土壤水分的蒸散（蒸发＋蒸腾）损失远比不覆膜土壤严重,在作物生长后期降水少或没有补充灌溉时,会产生严重的水分肋迫现象,显著抑制小穗分化和灌浆,最终导致收获得指数和产量下降,同时,地膜覆盖的增产作用在一定程度上是以耗竭土壤肥力,特别是在有机物质为代 的,因此,不正确的地膜覆盖（如全生育期的地膜覆盖）,不仅有时起不到显著的增产作用,而且易造成土壤养分,特别是土壤中硝态氮的累积和损失,肥料利用效率降低,土壤生态条件恶化,下降,难以持续高产,因此在确定地膜覆盖范式时,必须要考虑底墒,作物生育期降水,地膜覆盖的阶段性和氮肥的施用等。     

不同海拔下全程覆膜对烤烟光合功能和产量、质量的影响

以烤烟"云烟87"为材料,研究了在湖北省恩施州2种海拔下(1000、1300 m),全程覆膜和团棵期揭膜培土2种措施对烤烟光合功能和产量、质量的影响.结果表明:在2个海拔下,全程覆膜均会在烟株生育后期引起净光合速率和叶绿素含量快速下降,加速了光合功能的衰退,从而导致光合同化物分解加速;在海拔1000 m处,团棵期揭膜培土措施提高了烤烟总体光合功能,增加光合同化产物,明显提高产量和品质;在海拔1300 m处,虽然全程覆膜有早衰现象发生,但总体光合功能及其同化产物含量仍处于较高水平;在本试验条件下,在海拔1000 m处提倡采用团棵期揭膜培土的措施,在海拔1300 m处提倡采用全程覆膜的生产措施.

Abstract：

Field experiments were conducted at the elevations 1000 m and 1300 m in Enshi Autonomous Prefecture of Hubei to study the effects of plastic film mulching in whole growth period and of uncovering plastic film and hilling at rosette stage on the photosynthetic function,yield,and quality of flue-cured tobacco Yunyan 87.At the two elevations,plastic film mulching in whole growth period caused a rapid decrease of net photosynthetic rate and leaf chlorophyll content at the later growth stages of tobacco,and thus,accelcrated the decline of photosynthetic function,and induced the rapid decomposition of assimilation products.At the elevation 1000 m,uncovering plastic film and hilling at rosette stage enhanced the photosynthetic function,in creased the assimilation products,and improved tobacco yield and quality.At elevation 1300 m,plastic film mulching in whole growth period caused the premature senescence,but maintained the photosynthetic function and assimilation products at a higher level.It was advocated that in the study area,plastic film mulching in whole growth period and uncovering plastic film and hilling at rosette stage would be appropriate for cultivating flue-cured tobacco at the elevations 1300m and 1000 m,respectively.