Easily recyclable chiral polymeric Mn(III) salen complexes for oxidative kinetic resolution of racemic secondary alcohols

Chiral polymeric Mn(III) salen complexes were used efficiently for oxidative kinetic resolution of racemic secondary alcohols at room temperature. High chiral purity (ee; >99%) was achieved for the oxidative kinetic resolution of racemic secondary alcohols with 0.6 mol % catalyst loading in 60 min. The catalyst was easily recycled for five successive catalytic experiments.     

Enantioselective desymmetrization of meso-epoxides with anilines catalyzed by polymeric and monomeric Ti(IV) salen complexes

The active catalysts for the enantioselective ring opening (ARO) of meso-stilbene oxide, cis-butene oxide, cyclohexene oxide, cyclopentene oxide, and cyclooctene oxide with various substituted anilines were generated in situ by the reaction of Ti(O(i)Pr)(4) with poly-[(R,R)-N,N'-bis-{3-(1,1-dimethylethyl)-5-methylene salicylidene} cyclohexane-1,2-diamine]-1 and (1R,2R)-N,N'-bis[3,5-di(tert-butyl)salicylidene] cyclohexane-1,2-diamine-2. These catalysts in the presence of nonracemic imine as an additive provided β-amino alcohol in excellent yield (99%) and chiral purity (enantiomeric excess (ee) up to 99%) for the ARO of meso-stilbene oxide with aniline. The same protocol was less effective for the ARO of cyclic epoxides; however, when triphenylphosphine was used as an additive, there was a significant improvement in catalyst performance for the ARO of cyclohexene oxide (yield, 85-90%; ee, 63-67%). Both in situ generated polymeric and monomeric catalysts performed in a similar manner except that the polymeric catalyst Ti(IV)-1 was more active and recycled several times with retention of enantioselectivity when compared with the monomeric catalyst Ti(IV)-2, which was nonrecyclable.     

Recyclable Merrifield resin‐supported organocatalysts containing pyrrolidine unit through A3‐coupling reaction linkage for asymmetric Michael addition

Merrifield resin‐supported pyrrolidine‐based chiral organocatalysts A ? D through A³‐coupling reaction linkage have been developed and found to be highly effective catalysts for the Michael addition reaction of ketones with nitrostyrenes. The reactions generated the corresponding products in good yields (up to 92%), excellent enantioselectivities (up to 98% ee), and high diastereoselectivities (up to 99:1 dr). In addition, the catalysts can be reused at least five times without a significant loss of catalytic activity and stereoselectivity. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Dynamic kinetic asymmetric transfer hydrogenation of racemic 2,4-diaryl-2,3-dihydrobenzo[b][1,4]diazepines catalyzed by chiral phosphoric acids

Dynamic kinetic Transfer hydrogenation reaction of 2-methyl-2,4-diaryl-2,3-dihydrobenzo[b][1,4]diazepines, using phosphoric acids as catalysts and Hantzsch ester as hydride source, has been studied. A 3,3′-H8-binol derived phosphoric acid has been identified the optimal chiral catalyst for this transformation, affording 1,3-diamine derivatives with up to 8/1 dr, 86% ee and 94% ee for the major and minor diastereomers, respectively.     

Asymmetric epoxidation of olefins using novel chiral dinuclear Mn(III)-salen complexes with inherent phase-transfer capability in ionic liquids

Two new chiral dinuclear Mn(III)-Salen complexes with inherent phase-transfer capability have been synthesized, which serve as catalysts in the asymmetric epoxidation of nonfunctionalized alkenes. Experimental results show these complexes are effective catalysts for the asymmetric epoxidation of some cyclic alkenes and the catalysts have certain inherent phase-transfer capability during the epoxidation because of their weak water solubility. In general, good enantioselectivity and acceptable yields were achieved when NaClO was used as oxidant under three different reaction systems. Among these alkenes, the catalyst 6a gave the highest ee (94%) for 6-chloro-2,2-dimethylchromene in the presence of ionic liquid 2. Additionally, the recovery and recycling of one dimeric Mn(III)-Salen complex were tested to investigate atom efficiency of the catalyst in different reaction systems on the alkenes epoxidations. The catalyst 6a could be recovered and recycled for six times without losing activity and selectivity.     

Mass balancing in kinetic resolution: calculating yield and enantiomeric excess using chiral balance

When kinetic resolution is applied for the production of enantiomerically pure compounds, process options may be used which involve more than one chiral substrate and one chiral product, such as sequential or parallel enzymatic kinetic resolutions or hydrolysis of diastereomers. Although the relation between the yields (y) of the chiral compounds is straightforward in these cases, the relation between their enantiomeric excess (ee) values is not. Combining mass balances into a so-called chiral balance (Sigma y . ee(R) = 0) provides the relation between enantiomeric excess values in a useful manner. This chiral balance easily shows which nonmeasured enantiomeric excess values and yields can be calculated from measured values. The chiral balance is only valid when configurations at chiral centers are conserved. (c) 1995 John Wiley & Sons, Inc.     

Enantioselective cyanosilylation of ketones catalyzed by recyclable polymeric and dimeric Mn(III) salen complexes at room temperature

Recyclable polymeric 1 and dimeric 2 chiral Mn(III) salen complexes catalyzed enantioselective cyanosilylation of various ketones in the presence of triphenylphosphine oxide as an additive proceeded smoothly at room temperature, providing excellent yields (up to 98%) and enantiomeric excess (up to 86%) of respective cyanohydrin trimethylsilyl ether. For most of the substrates, the Catalyst 1 showed slightly better reactivity and enantioselecitivity than the Catalyst 2 nevertheless both the catalysts were easily recovered and reused four times with the retention of their efficiency.     

Enantioselective and diastereoselective Michael addition of ketone/aldehyde to trans-nitroolefins catalyzed by a novel chiral pyrrolidine-thiourea

The direct Michael addition reaction of cyclohexanone/aliphatic aldehydes with nitroolefins, catalyzed by a novel chiral pyrrolidine-thiourea catalyst 1a, is described. The desired 1,4-adducts were obtained in moderate yields with enantioselectivities up to 99% ee and dr up to 99:1 of the syn product.     

Enantioselective addition of phenylacetylene to aldehydes catalyzed by polymer‐supported titanium(IV) complexes of β‐hydroxy amides

A series of polymer‐supported chiral β‐hydroxy amides and C₂‐symmetric β‐hydroxy amides have been synthesized and successfully used for the enantioselective addition of phenylacetylene to aldehydes. High yields (up to 93%) and enantioselectivities (up to 92% ee) were achieved by using polymer‐supported chiral β‐hydroxy amide 4b . The resin 4b is reused four times, giving the product with enantioselectivity 80% ee. Fortunately, it is found that this heterogonous system is suitable not only for aromatic aldehydes but also aliphatic aldehyde. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Polymer-supported ferrocenyl oxazolines for the catalyzed highly enantioselective phenyl transfer to aldehydes

A new chiral MeO-PEG-supported ferrocenyl oxazoline was synthesized and successfully employed in the enantioselective phenyl transfer to aldehydes. The products were obtained in high yields and with excellent enantioselectivities (up to 97% ee). Furthermore, the recovery of the ferrocene was facile, and catalyst efficiency was maintained in subsequent reactions.     

A novel isosteviol-based bifunctional squaramide organocatalyst for enantioselective Michael addition of acetylacetone to nitroolefins

Chiral amine-squaramide is a kind of effective hydrogen bond donor bifunctional catalyst to promote many asymmetric transformations. In this paper, novel chiral tertiary amine-squaramide derived from the natural product of the stevioside was developed and applied into the asymmetric Michael addition of acetylacetone to nitroolefins. This asymmetric reaction performed well, and a series of enantiomerically enriched compounds were obtained in high yields (up to 96%) with excellent enantioselectivities (up to 99% ee).     

A novel chiral aliphatic–aromatic diamine promoted direct,highly enantio‐ and diastereoselective Michael addition of cyclohexanone to nitroolefins under solvent‐free conditions

A series of new highly efficient chiral aliphatic–aromatic diamine catalysts have been designed and successfully applied to the asymmetric Michael addition of cyclohexanone with nitroolefins under solvent‐free conditions without any acidic additives. The desired adducts were obtained in high yields with excellent enantio‐ and diastereoselectivities of syn products (up to >99% ee, >99:1 dr). Chirality 2010. © 2010 Wiley‐Liss, Inc     

Reusable ω-transaminase sol–gel catalyst for the preparation of amine enantiomers

Heterogeneous ω-transaminase sol–gel catalysts were prepared and characterized in terms of immobilization degree, loading capacity and catalytic behavior in the kinetic resolution of racemic 1-phenylethylamine (a model compound) with sodium pyruvate in phosphate buffer (pH 7.5). The catalyst obtained when ω-transaminase from Arthrobacter sp. was encapsulated from the aqueous solution of the enzyme, isopropyl alcohol and polyvinyl alcohol in the sol–gel matrices, consisting of the 1:5 mixture of tetramethoxysilane and methyltrialkoxysilane, proved to be optimal including the reuse and storage stabilities of the catalyst. The optimized immobilizate was shown to perform well in the kinetic resolution of four structurally different aromatic primary amines in aqueous DMSO (10, v/v-%). The enzyme preparation showed synthetic potential by enabling the catalyst reuse in five consecutive preparative scale kinetic resolutions using 100 mM 1-phenylethylamine in aqueous DMSO (10, v/v-%). It was typical to fresh catalyst preparations that the kinetic resolution tended to exceed 50% before the reaction stopped leaving the (S)-amine unreacted while thereafter in reuse the reactions stopped at 50% conversion as expectable to highly enantioselective reactions.     

Kinetic resolution and isomerization of 2,5-disubstituted pyrrolines

The efficient kinetic resolution of 2,5-disubstituted pyrrolines was accomplished by employing hydrosilylation with a chiral catalyst, (EBTHI)TiF2 (EBTHI = ethylenebis(tetrahydroindenyl)). An interesting isomerization reaction of the cyclic imines catalyzed by the same chiral catalyst was also discovered.     

Asymmetric ring opening of terminal epoxides via kinetic resolution catalyzed by new bimetallic chiral (salen)Co complexes

The highly enantioselective hydrolytic kinetic resolution (HKR) of racemic terminal epoxides by new bimetallic chiral (salen)Co provides a operationally very simple protocol for the synthesis of enantiomerically enriched terminal epoxides (>99% ee) and diols. Optically pure chlorohydrins have been synthesized in one step by ring‐opening reactions of terminal epoxides with HCl using kinetic resolution. © 2005 Wiley‐Liss, Inc. Chirality     

New bulky chiral Lewis acid catalyst: 3,3'-di(2-mesitylethynyl)binaphthol-titanium(IV) complex

A new chiral Lewis acid catalyst 9 was prepared in situ from a 1:2 molar mixture of (R)-3,3'-di(2-mesitylethynyl)binaphthol (6) and titanium(IV) isopropoxide at ambient temperature. The 3- and 3'-substituents on 6 were effective for preventing undesired aggregation between Ti(IV) complexes and increasing the enantioselectivity (up to 82% ee) in the Diels-Alder reaction of methacrolein with cyclopentadiene.     

Tetranuclear titanium 7,7'-modified binaphtholate cluster as a novel chiral Lewis acid catalyst

Chiral tetranuclear Ti cluster, a cubic structure constituted of four Ti atoms and OHs, and six (R)-binaphthols (BINOL) bridged two Ti atoms as ligands, is shown to be a novel chiral Lewis acid catalyst for the [2+3] cycloaddition reaction with nitrones. The chiral Ti clusters with 7,7'-substituted (R)-BINOL ligands was synthesized to give enhanced enantiomeric excesses up to 78% ee.     

Synthesis of xylal- and arabinal-based crown ethers and their application as asymmetric phase transfer catalysts

New xylal- and arabinal-based monoaza-15-crown-5 ethers were synthesized starting from l - and d -xylose, and l - and d -arabinose, respectively. These monosaccharide-based chiral macrocycles were tested as phase transfer catalysts in a few asymmetric reactions. The xylal-based crown compounds proved to be efficient catalysts in a few liquid-liquid phase reactions. The epoxidation of trans-chalcone and the Darzens condensation of α-chloroacetophenone with benzaldehyde took place with complete diastereoselectivity and up to 77% ee and 58% ee, respectively. It was found that the substituents in the aromatic ring of the chalcone and the α-chloroacetophenone had an influence on the enantioselectivity. The highest ee values were obtained in the epoxidation of 4-chlorochalcone (81% ee) and in the reaction of a 2-naphthyl analogue (96% ee), while in the Darzens condensation of 4-phenyl-α-chloroacetophenone with benzaldehyde, a maximum ee of 91% was detected. The configuration of the monosaccharide unit in the crown ring influenced the absolute configuration of the epoxyketones synthesized.     

Asymmetric catalysis with self-organized chiral lanthanum complexes: practical and highly enantioselective epoxidation of alpha,beta-unsaturated ketones

A highly efficient and practical method for obtaining alpha,beta-epoxy ketones with high optical purities was developed. The chiral lanthanum complex self-organized in situ from lanthanum triisopropoxide, (R)-BINOL, triarylphosphine oxide, and alkyl hydroperoxide (1:1:1:1) was found to catalyze the epoxidation of alpha,beta-unsaturated ketones with tert-butyl hydroperoxide or cumene hydroperoxide at room temperature to give the corresponding epoxy ketones in high enantioselectivities (up to >99% enantiomeric excess (ee)). A remarkably high asymmetric amplification, a positive nonlinear effect, was observed in the epoxidation of chalcone, which strongly suggests the formation of a dinuclear peroxide-involved mu-complex as the active catalyst.     

Enantioselective hydrogenation of olefins with phosphinooxazoline-iridium catalysts

Cationic iridium complexes with chiral phosphinooxazoline ligands are efficient catalysts for the enantioselective hydrogenation of olefins. The complexes are readily prepared, air-stable, and easy to handle. In contrast to chiral rhodium- and ruthenium-phosphine catalysts, they do not require the presence of a polar coordinating group near the C=C bond. In the hydrogenation of unfunctionalized trisubstituted 1,2-diaryl-olefins, high enantioselectivities of >95% ee with full conversion and turnover frequencies of >7,000 h-1 can be achieved, using 0.1 mol% of catalyst with tetrakis[3, 5-bis(trifluoromethyl)phenyl]borate (TFPB or BARF) as the counterion. The corresponding hexafluorophosphate or tetrafluoroborate salts give low conversion due to deactivation of the catalyst during the reaction. Substrates with polar substituents such as allylic alcohols, on the other hand, afford better results with the hexafluorophosphate salts.