Construction of two stable bifunctional plasmids for Streptomyces spp. and Escherichia coli

Two bifunctional plasmid vectors pZG5 (7.45 kb) and pZG6 (6.95 kb), for gene transfer between Streptomyces spp. and Escherichia coli have been constructed by fusion of the multicopy broad-host-range Streptomyces plasmid pIJ350 with E. coli plasmids Bluescribe M13- (pZG5) or pUC18 (pZG6). Both plasmids possess several unique restriction sites suitable for DNA cloning. Stable transformants of Streptomyces rimosus R6 and S. lividans 66 were obtained, harboring intact plasmids regardless of colony age or multiple subculturing. Moreover, pZG5 and pZG6 were successfully used to introduce several homologous transfer RNA genes into S. rimosus.     

A Simple and Rapid Method of Transformation of Streptomyces rimosus R6 and Other Streptomycetes by Electroporation

Usually plasmid DNA is introduced into Streptomyces strains by polyethylene glycol-mediated transformation of protoplasts. However, many Streptomyces strains are only poorly or not at all transformable via protoplasts. Therefore, we have optimized the parameters critical for the application of electrotransformation of plasmid DNA into Streptomyces species. The most critical parameters evaluated for electrotransformation of the model strain Streptomyces rimosus R6 were the pretreatment of mycelia, buffer composition, and electric field strength. The electrocompetent mycelia were prepared from 24-h-old cultures, treated mildly with lysozyme, resuspended in sucrose-glycerol-polyethylene glycol buffer, and stored in aliquots at -70 deg C. The electric field strength of 10 kV/cm at 400 (Omega) and a capacitance of 25 (mu)F was applied. The method is simple and rapid, yielding transformant colonies in 48 to 72 h. Efficiencies of 10(sup5) to 10(sup6) transformants per (mu)g of plasmid DNA were reproducibly achieved for S. rimosus R6 and its mutants, and these numbers were 10(sup2) to 10(sup3) higher than those attained by polyethylene glycol-assisted transformation of protoplasts. In addition, we show that electroporation can be applied to other Streptomyces species, such as S. lividans 66, S. coelicolor A3(2), and an S. venezuelae strain. This last one could not be transformed by the standard protoplast procedure. Our data suggest that, because of the diversity of streptomycetes, the conditions have to be optimized for each strain.     

Lack of plasmids in Streptomyces hydrogenans

Abstract Wild-type cells of Streptomyces hydrogenans ATCC 19631, strain HY A₁, show a remarkable degree of genetic instability with regard to the biosynthesis of 17β-hydroxysteroid dehydrogenase. As plasmids might be responsible for this phenomenon we tried to detect plasmids in lysates of this microorganism. Streptomyces lividans , strain TK64 (pIJ916), was used as reference strain, containing a 19-kb plasmid with low abundancy. Whereas plasmid DNA could be shown in lysates of S. lividans TK64, no plasmid DNA was detectable in lysates of S. hydrogenans .     

Molecular cloning and expression in Streptomyces lividans of a streptomycin 6-phosphotransferase gene from a streptomycin-producing microorganism

The gene encoding streptomycin 6-kinase involved in the self-resistance of the streptomycin-producing Streptomyces griseus HUT 6037 was cloned in the plasmid vector pIJ703. The resulting plasmid, pSP6, contained 2.5 kb inserts of S. griseus DNA. When streptomycin-susceptible S. lividans 1326 was retransformed with pSP6, all transformants produced streptomycin 6-kinase. Addition of streptomycin to the culture medium of S. lividans carrying pSP6 plasmid brought about a remarkable increase in streptomycin 6-kinase activity in the cell extracts. It is suggested from the results that the production of streptomycin 6-kinase in streptomycin producer was induced by streptomycin accumulated during cultivation.     

A linear plasmid temperature-sensitive for replication in Streptomyces hygroscopicus 10-22

Streptomyces hygroscopicus 10-22 harbors a conjugative, autonomously replicating linear plasmid pHZ6 of ca. 70 kb, which shows no obvious homology with chromosomal DNA and is temperature-sensitive for replication, being stable in the host at 28 degrees C but easily lost at 37 degrees C. On a lawn of the wild-type S. hygroscopicus 10-22 cured of pHZ6, pHZ6 elicit pocks. Temperature sensitivity seemed to be a unique property for pHZ6 among six linear plasmids tested, including the well-known linear plasmids SLP2 in Streptomyces lividans 1326 and SCP1 in Streptomyces coelicolor A3(2). The distinct identity of pHZ6 from previously identified pHZ1-pHZ5 was demonstrated by the profile of relevant plasmids in six well-defined strains originated from S. hygroscopicus 10-22.     

Structural stability of heterologous genes cloned in Streptomyces plasmid pIJ702

A recombinant plasmid pWCL1 containing Streptomyces plasmid pIJ702, E. coli plasmid pUC12, and hepatitis B viral surface antigen (HBsAg) gene was stably maintained in E. coli, but exhibited structural instability in S. lividans 1326. The deletions were found ranging from 2.75 to 5.65 kilobases (kb) and most of them occurred within the melanin (mel) gene of pIJ702, resulting in the loss of part of the mel gene sequence plus the insert. The removal of the pUC12 sequence from pWCL1 eliminated the instability. However, pUC12 alone inserted in either orientation on pIJ702 also caused the deletion in S. lividans 1326. The results indicated that the structural instability of hybrid plasmid of pIJ702 depended on the interaction between the mel sequence and the inserted sequence.     

Development of integrative vectors for Actinomycetes--producers of antibiotics]

The integrative vectors pSU 475 and pSU 476 with variable numbers of copies per genome were developed for antibiotic producing actinomycetes. For this, the amplifying sequence AUD-Sr 1 of Streptomyces rimosus and the BamHIB fragment of the eSA 1 genetic element from Streptomyces antibioticus were used. The eSA 1 fragment was an element required for integration of a vector to the actinomycete chromosomes since it was homologous with the chromosomal DNAs of S. lividans, S. erythraeus and S. antibioticus. At the first stage the AUD-Sr 1 sequence within the actinomycete plastid pSU 23 was cloned by the vector pUC 19 to E coli. In that experiment the 12.4-kb plasmid pSU 449 was isolated. At the second stage the BamHIB-fragment of the eSA 1 element was incorporated into the resultant hybrid plasmid pSU 449. The 16.5-kb hybrid plasmids pSU 475 and pSU 476 were isolated. In these plasmids the BamHIB fragment of eSA 1 was present in two orientations. The developed vectors were useful in cloning DNA to S. lividans and S. erythraeus.     

Cloning, expression in Escherichia coli and nucleotide sequence of a tetracycline-resistance gene from Streptomyces rimosus

Determinants of tetracycline resistance have been cloned from two different tetracycline-producing industrial strains of Streptomyces into Streptomyces lividans using the plasmid vector pUT206. Three plasmids, pUT250 and pUT260 with a 9.5 and a 7.5 kb insert respectively of Streptomyces rimosus DNA, and pUT270 with a 14.0 kb insert of Streptomyces aureofaciens DNA, conferring resistance to tetracycline, have been isolated. By in vitro sub-cloning, a similar fragment of 2.45 kb containing the tetracycline resistance gene (tet347) was further localized on these plasmids. The S. rimosus gene has been cloned into Escherichia coli and expressed under the control of lambda pL or Lpp promoters. Differential protein extraction of E. coli cells revealed the presence of an additional membrane-embedded protein in tetracycline-resistant cells. On the basis of available restriction endonuclease maps, the tet347 gene is probably identical to the tetB gene from S. rimosus recently identified by T. Ohnuki and co-workers as responsible for the reduced accumulation of tetracycline. The nucleotide sequence of a 2052 bp DNA fragment containing the TcR structural gene from S. rimosus has been determined. The amino acid sequence of the tet347 protein (Mr35818) deduced from the nucleotide sequence shows a limited but significant homology to other characterized tetracycline transport acting determinants from pathogenic bacteria.     

Plasmid transformation of Streptomyces tendae after heat attenuation of restriction

Streptomyces tendae ATCC 31160 produces nikkomycin, a fungicide and insecticide that inhibits chitin synthases. Exposure of S. tendae protoplasts to 50 degrees C for 30 min is required for transformation (10(2) thiostrepton-resistant transformants micrograms of DNA-1) with plasmid pIJ702 or pIJ680 from Streptomyces lividans. pIJ702 and pIJ680 DNA isolated from the S. tendae transformants is efficient (10(6) to 10(7) transformants micrograms of DNA-1) in subsequent transformations of S. tendae protoplasts generated at 30 degrees C. PstI fails to cut the single PstI site in pIJ702 and cuts only one of the two PstI sites in pIJ680 DNA isolated from S. tendae transformants. Digests of plasmid DNA mixtures showed that plasmid DNA from S. tendae does not inhibit PstI activity. pIJ702 and pIJ680 DNA from S. tendae transformants was used to transform S. lividans to show that plasmid DNA remains unchanged, except for modification at some PstI sites in S. tendae, as a consequence of passage through S. tendae. The DNA modification is lost when S. lividans is transformed with plasmid DNA from S. tendae transformants. Since S. tendae modifies only some PstI sites, it appears the modification (presumably restriction activity also) activity in S. tendae recognizes a sequence that includes or overlaps the PstI hexanucleotide recognition sequence.     

Plasmid transformation of Streptomyces tendae after heat attenuation of restriction.

Streptomyces tendae ATCC 31160 produces nikkomycin, a fungicide and insecticide that inhibits chitin synthases. Exposure of S. tendae protoplasts to 50 degrees C for 30 min is required for transformation (10(2) thiostrepton-resistant transformants micrograms of DNA-1) with plasmid pIJ702 or pIJ680 from Streptomyces lividans. pIJ702 and pIJ680 DNA isolated from the S. tendae transformants is efficient (10(6) to 10(7) transformants micrograms of DNA-1) in subsequent transformations of S. tendae protoplasts generated at 30 degrees C. PstI fails to cut the single PstI site in pIJ702 and cuts only one of the two PstI sites in pIJ680 DNA isolated from S. tendae transformants. Digests of plasmid DNA mixtures showed that plasmid DNA from S. tendae does not inhibit PstI activity. pIJ702 and pIJ680 DNA from S. tendae transformants was used to transform S. lividans to show that plasmid DNA remains unchanged, except for modification at some PstI sites in S. tendae, as a consequence of passage through S. tendae. The DNA modification is lost when S. lividans is transformed with plasmid DNA from S. tendae transformants. Since S. tendae modifies only some PstI sites, it appears the modification (presumably restriction activity also) activity in S. tendae recognizes a sequence that includes or overlaps the PstI hexanucleotide recognition sequence.     

Cloning of a DNA fragment from Streptomyces griseus which directs streptomycin phosphotransferase activity

DNA from Streptomyces griseus ATCC 12475 was partially digested with Sau3A and fragments were ligated into BglII-cleaved pIJ702. When the ligation mixture was used to transform protoplasts of Streptomyces lividans TK54, two transformants resistant to both thiostrepton and streptomycin were isolated. The hybrid plasmids pBV3 and pBV4 which they contained, carrying inserts of sizes 4.45 and 11.55 kbp respectively, each retransformed S. lividans to streptomycin resistance at high efficiency. Both plasmids hybridized to restriction digests of S. griseus chromosomal DNA in Southern blot experiments. In vitro deletion and sub-cloning experiments showed the sequence conferring streptomycin resistance to lie within a segment of 1.95 kbp. Extracts of TK54(pBV3) and TK54(pBV4) contained a streptomycin phosphotransferase similar to that in extracts of S. griseus. Streptomycin phosphotransferase activity appeared in extracts of S. griseus, TK54(pBV3) and TK54(pBV4) within 2 d of inoculation. When pBV3 and pBV4 were retransformed into S. griseus with selection for thiostrepton resistance, plasmid DNA of sizes corresponding to the incoming plasmids was found in the transformants. In these transformants the phosphotransferase appeared at 1.5 rather than 2 d, and reached a level over twice that of the original S. griseus strain.     

Determinant of resistance to kanamycin in Streptomycin rimosus: amplification in the chromosome and reversible genetic instability

The study on the kanamycin resistance determinant (Kanr) in an oxytetracycline--producing strain of S. rimosus showed that it was capable of amplifying in the chromosome during selection for increasing the antibiotic resistance level. The amplification of the DNA fragment with a molecular weight of 10.3 MDa containing Kanr amounted to 300 copies per genome, which resulted in a more than 1000-fold increase in kanamycin resistance level. Cloning of the Kanr determinant on plasmid SLP1.2 in S. lividans strain 66 was performed. In Streptomyces lividans strain 66 the Kanr determinant preserved the capacity for amplification in the hybrid plasmid pSU10 integrated into the chromosome. The Kanr determinant in the strains of S. rimosus and S. lividans was characterized by transfers Kanr in equilibrium Kans with a frequency of 1 X 10(-3). It was shown that the mutation in S. lividans strain 66 resulting in phenotype Kans was not connected with the structural Kanr gene on plasmid pSU10 but was localized on the chromosome. Phenotype Kans was promoted by a decrease in the number of the copies of the regulatory genetic element designated RES1. The reverse to phenotype Kanr might be due to one of the following events: amplification to the initial level of RES1 and amplification up to 200 copies per the genome of the hybrid plasmid pSU10 containing the Kanr determinant. Amplification of the Kanr determinant with preserved initial level of RES1 element resulted in a more than 1000 times increase in the resistance level.     

Characterization of a unique methyl-specific restriction system in Streptomyces avermitilis.

Streptomyces avermitilis contains a unique restriction system that restricts plasmid DNA containing N6-methyladenine or 5-methylcytosine. Shuttle vectors isolated from Escherichia coli RR1 or plasmids isolated from modification-proficient Streptomyces spp. cannot be directly introduced into S. avermitilis. This restriction barrier can be overcome by first transferring plasmids into Streptomyces lividans or a modification-deficient E. coli strain and then into S. avermitilis. The transformation frequency was reduced greater than 1,000-fold when plasmid DNA was modified by dam or TaqI methylases to contain N6-methyladenine or by AluI, HhaI, HphI methylases to contain 5-methylcytosine. Methyl-specific restriction appears to be common in Streptomyces spp., since either N6-methyladenine-specific or 5-methylcytosine-specific restriction was observed in seven of nine strains tested.     

Transferable Streptomyces DNA amplification and coamplification of foreign DNA sequences.

The 8.8-kb amplifiable unit of DNA of Streptomyces achromogenes subsp. rubradiris, AUD-Sar 1, which carries 0.8-kb terminal direct repeats and a spectinomycin resistance determinant, can mediate high-level amplification of an AUD-Sar 1-derived 8.0-kb DNA sequence not only in S. achromogenes but also in the heterologous host Streptomyces lividans. This was seen upon introduction of AUD-Sar 1 into chloramphenicol-sensitive strains of S. lividans via the temperature-sensitive (39 degrees C) plasmid pMT660, which contains the thiostrepton resistance gene tsr. Following the cultivation of transformants at 39 degrees C on media containing spectinomycin, a number of strains which were unable to grow on thiostrepton and which carried the amplified 8.0-kb DNA sequence as arrays of 200 to 300 copies of tandem 8.0-kb repeats were found. Chloramphenicol-resistant strains of S. lividans did not yield amplified sequences under similar conditions. Studies with plasmids carrying inserted antibiotic resistance genes at two sites of AUD-Sar 1 yielded coamplified sequences which contain the inserted DNA. Transformation with a plasmid carrying a 1.0-kb deletion in AUD-Sar 1 followed by growth under similar conditions yielded a 7.0-kb repeated DNA sequence. Southern analysis revealed the absence of vector sequences located on the right side of AUD-Sar 1 in the input plasmids in all examined DNA samples of amplified strains. In contrast, a majority of the samples revealed the presence at unit copy level of AUD-Sar 1 left-adjacent sequences which are part of the input plasmids and in several samples the presence of certain vector sequences located near them. The results suggest input plasmid integration into the S. lividans chromosome prior to the generation of the amplified sequences and the deletion of AUD-Sar 1 adjacent sequences.     

Functional analysis of the Streptomyces ambofaciens element pSAM2.

pSAM2 is an 11-kb element integrated in the Streptomyces ambofaciens ATCC23877 genome and found additionally as a free replicon present at several copies per chromosome in strain JI3212, the derivative of ATCC23877 isolated after uv irradiation. In spite of its small size, this element specifies numerous functions including maintenance, site-specific integration, self-transmissibility, pock formation, and mobilization of chromosomal markers. After transfer of the free form of pSAM2 to Streptomyces lividans, the free and the integrated forms coexist. A functional map of pSAM2 was deduced from phenotypes exhibited in S. lividans by numerous deletion or insertion derivatives. In addition to the previously characterized regions sufficient for site-specific integration we have shown that separate regions are involved in either plasmid maintenance as a free molecule, plasmid transfer, and pock formation. Transfer of pSAM2 could depend on its ability to be maintained in a free form, since plasmids deficient in this function are transferred at very low frequency. Deletions of some regions of the plasmid are lethal for the plasmid or the host, but if some other regions are deleted simultaneously, transformants can be obtained.     

Plasmid transfer from Streptomyces to Mycobacterium smegmatis by spontaneous transformation

Hybrids of the Streptomyces coelicolor conjugative plasmid SCP2* and the Mycobacterium plasmid pAL5000 were transferred from Streptomyces coelicolor or Streptomyces lividans to Mycobacterium smegmatis mc2155 in plate crosses. Inactivation of the SCP2* transfer function did not prevent or reduce plasmid transfer. This transfer was DNase I sensitive and thus involved release of DNA from Streptomyces, followed by transformation of M. smegmatis. M. smegmatis growing on specific solid media was also transformed by pure CCC and linear plasmid DNA. Small plasmids were taken up intact but large plasmids suffered deletions. Competence developed within 24 h of incubation at 30 degrees C or 37 degrees C, and up to 400 transformants were obtained per microg of CCC plasmid DNA. Transformation frequencies were higher when M. smegmatis was co-cultivated with plasmid-free Streptomyces, but unaffected by resident homologous sequences or inactivation of recA in M. smegmatis. Spontaneous transformation was also observed with a circular Streptomyces transposable element which inserted into chromosomal sites. Transformative plasmid transfer was also shown to occur between M. smegmatis strains. This is the first report of non-artificially induced, spontaneous plasmid transformation in Mycobacterium.     

Improvement of transformation and electroduction in avermectin high-producer,<Emphasis Type="Italic">Streptomyces avermitilis</Emphasis>

Factors affecting the PEG-mediated transformation and electrotransformation of Streptomyces avermitilis protoplasts, an industrial avermectin high-producer, were evaluated. The maximum protoplast transformation efficiency under optimum conditions with PEG was 3 x 106 transformants per microg plasmid pIJ702 DNA. The efficiency of electrotransformation with the same plasmid the intact cells grown in medium with 0.5 mmol/L CaCl2, suspended in buffer with 0.5 mol/L sucrose +1 mmol/L MgCl2, and pulsed at an electric field strength of 10 kV/cm, 800 ohms, 25 microF, was of 2 x 10(3) transformants per microg DNA. When the cells were electroporated after mild lysozyme-treatment, the efficiency was up to 10(4) transformants per microg DNA. Electroporation of protoplasts and germlings had a lower efficiency (10(2) transformants per microg DNA). We report that electroporation under optimum conditions can be used for direct transfer of nonconjugative plasmid pIJ699 between two different Streptomyces species, S. avermitilis and S. lividans.     

Transformation and transfection of anthracycline-producing streptomycetes.

Streptomyces peucetius and Streptomyces strain C5, producers or anthracycline antibiotics, were converted to protoplasts from vegetatively growing mycelia. Conditions are described for maximal protoplast formation (greater than 99%) and for regeneration frequencies of up to 13%. Streptomycete plasmids pIJ61, pIJ702, and pIJ922, from the replicons SLP1, pIJ101, and SCP2, respectively, were isolated from Streptomyces lividans 66 and successfully introduced into S. peucetius and Streptomyces strain C5 by polyethylene glycol-mediated protoplast transformation. Frequencies of up to 10(6) transformations X microgram of plasmid DNA-1 were achieved by these procedures. Analyses showed that the two anthracycline-producing strains can stably harbor the plasmids without deletion of plasmid sequences or loss of the plasmids for several transfers through selective media. Fragments of DNA from S. peucetius ligated into pIJ702 and introduced into Streptomyces strain C5 were stable after several transfers through selective media. Both anthracycline producers also were sensitive to infection and transfection by actinophages KC401 and KC515, clear plaque derivatives of bacteriophage phi C31. Optimal conditions were determined for the transfection of S. peucetius and Streptomyces strain C5 protoplasts with phi C31 KC401 and KC515 DNA with liposome-assisted, polyethylene glycol-mediated protoplast transfection.