Predicting beef carcass meat,fat and bone proportions from carcass conformation and fat scores or hindquarter dissection

Equations for predicting the meat, fat and bone proportions in beef carcasses using the European Union carcass classification scores for conformation and fatness, and hindquarter composition were developed and their accuracy was tested using data from 662 cattle. The animals included bulls, steers and heifers, and comprised of Holstein–Friesian, early- and late-maturing breeds × Holstein–Friesian, early-maturing × early-maturing, late-maturing × early-maturing and genotypes with 0.75 or greater late-maturing ancestry. Bulls, heifers and steers were slaughtered at 15, 20 and 24 months of age, respectively. The diet offered before slaughter includes grass silage only, grass or maize silage plus supplementary concentrates, or concentrates offered ad libitum plus 1 kg of roughage dry matter per head daily. Following the slaughter, carcasses were classified mechanically for conformation and fatness (scale 1 to 15), and the right side of each carcass was dissected into meat, fat and bone. Carcass conformation score ranged from 4.7 to 14.4, 5.4 to 10.9 and 2.0 to 12.0 for bulls, heifers and steers, respectively; the corresponding ranges for fat score were 2.7 to 11.5, 3.2 to 11.3 and 2.8 to 13.3. Prediction equations for carcass meat, fat and bone proportions were developed using multiple regression, with carcass conformation and fat score both included as continuous independent variables. In a separate series of analyses, the independent variable in the model was the proportion of the trait under investigation (meat, fat or bone) in the hindquarter. In both analyses, interactions between the independent variables and gender were tested. The predictive ability of the developed equations was assed using cross-validation on all 662 animals. Carcass classification scores accounted for 0.73, 0.67 and 0.71 of the total variation in carcass meat, fat and bone proportions, respectively, across all 662 animals. The corresponding values using hindquarter meat, fat and bone in the model were 0.93, 0.87 and 0.89, respectively. The bias of the prediction equations when applied across all animals was not different from zero, but bias did exist among some of the genotypes of animals present. In conclusion, carcass classification scores and hindquarter composition are accurate and efficient predictors of carcass meat, fat and bone proportions.     

Effect of breed, gender, housing system and dietary crude protein content on performance of finishing beef cattle fed maize-silage-based diets

Maize silage-based diets with three dietary crude protein (CP) supplements were offered to 96 finishing cattle of contrasting breed (Holstein Friesian (HF) v. Simmental × HF (SHF)) and gender (bull v. steer) housed in two types of feeding system (group fed v. individually fed). The three protein supplements differed either in CP or protein degradability (degradable (LUDP) v. rumen undegradable (HUDP)) and provided CP concentrations of 142 (Con), 175 (LUDP) and 179 (HUDP) g/kg dry matter (DM) respectively, with ratios of degradable to undegradable of 3.0, 1.4 and 0.9:1 for diets Con, LUDP and HUDP, respectively. DM intakes were marginally higher (P = 0.102) for LUDP when compared with Con and HUDP. Rates of daily live-weight gain (DLWG) were higher (P = 0.005) in LUDP and HUDP when compared with Con. HF had higher DM intakes than SHF although this did not result in any improvement in HF DLWG. Bulls had significantly better DM intakes, DLWG and feed conversion efficiency than steers. Conformation scores were better in SHF than HF (P < 0.001) and fat scores lower in bulls than steers (P < 0.001). There was a number of first order interactions established between dietary treatment, breed, gender and housing system with respect to rates of gain and carcass fat scores.     

Effect of weight at slaughter and breed on beef intramuscular lipid classes and fatty acid profile

The effect of slaughter weight and breed on the composition of intramuscular fat (IMF) of seven Spanish cattle breeds was studied. Lipid classes and fatty acids were evaluated in young bulls of seven local Spanish cattle breeds, Asturiana, Avileña, Morucha, Parda Alpina, Pirenaica, Retinta and Rubia Gallega, slaughtered at a live weight of 320 kg (veal type) and 550 kg (yearling bull type). Higher slaughter weight and early maturating breeds produced higher IMF content in the longissimus muscle (P < 0.001), which was linked to a reduction in phospholipids, monoglycerides, diglycerides, cholesterol and free-fatty acids content, but an increase in triacylglycerols. Besides, heavier animals displayed a higher percentage of saturated and monounsaturated fatty acids (MUFA), but a lower polyunsaturated fatty acids (PUFA) percentage (P < 0.001). The increase in triglycerides (TG), saturated fatty acids (SFA) and MUFA illustrates the increasing importance of lipid storage as fattening proceeds and the acquisition of ruminal functionality. The feeding system based on cereals had a strong influence on the fatty acid profile, giving the studied beef a relatively high PUFA/SFA and n-6/n-3 ratios.     

Effect of space allowance and floor type on performance,welfare and physiological measurements of finishing beef heifers

Accommodating cattle indoors during the winter is widely practiced throughout Europe. There is currently no legislation surrounding the space allowance and floor type that should be provided to cattle during this time, however, concerns have been raised regarding the type of housing systems currently in use. The objective of the study was to investigate the effect of space allowance and floor type on performance and welfare of finishing beef heifers. Continental crossbred heifers (n=240: mean initial live; weight, 504 (SD 35.8) kg) were blocked by breed, weight and age and randomly assigned to one of four treatments; (i) 3.0 m², (ii) 4.5 m² and (iii) 6.0 m² space allowance per animal on a fully slatted concrete floor and (iv) 6.0 m² space allowance per animal on a straw-bedded floor, for 105 days. Heifers were offered a total mixed ration ad libitum. Dry matter intake was recorded on a pen basis and refusals were weighed back twice weekly. Heifers were weighed, dirt scored and blood sampled every 3 weeks. Whole blood was analysed for complete cell counts and serum samples were assayed for metabolite concentrations. Behaviour was recorded continuously using IR cameras from days 70 to 87. Heifers’ hooves were inspected for lesions at the start of the study and again after slaughter. Post-slaughter, carcass weight, conformation and fat scores and hide weight were recorded. Heifers housed at 4.5 m² had a greater average daily live weight gain (ADG) than those on both of the other concrete slat treatments; however, space allowance had no effect on carcass weight. Heifers accommodated on straw had a greater ADG (0.15 kg) (P<0.05), hide weight (P<0.01) better feed conversion ratio (P<0.05) and had greater dirt scores (P<0.05) at slaughter than heifers accommodated on concrete slats at 6.0 m². The number of heifers lying at any one time was greater (P<0.001) on straw than on concrete slats. Space allowance and floor type had no effect on the number of hoof lesions gained or on any of the haematological or metabolic variables measured. It was concluded that increasing space allowance above 3.0 m²/animal on concrete slats was of no benefit to animal performance but it did improve animal cleanliness. Housing heifers on straw instead of concrete slats improved ADG and increased lying time; however carcass weight was not affected.     

Impact of including growth,carcass and feed efficiency traits in the breeding goal for combined milk and beef production systems

Improving feed efficiency in dairy cattle could result in more profitable and environmentally sustainable dairy production through lowering feed costs and emissions from dairy farming. In addition, beef production based on dairy herds generates fewer greenhouse gas emissions per unit of meat output than beef production from suckler cow systems. Different scenarios were used to assess the profitability of adding traits, excluded from the current selection index for Finnish Ayrshire, to the breeding goal for combined dairy and beef production systems. The additional breeding goal traits were growth traits (average daily gain of animals in the fattening and rearing periods), carcass traits (fat covering, fleshiness and dressing percentage), mature live weight (LW) of cows and residual feed intake (RFI) traits. A breeding scheme was modeled for Finnish Ayrshire under the current market situation in Finland using the deterministic simulation software ZPLAN+. With the economic values derived for the current production system, the inclusion of growth and carcass traits, while preventing LW increase generated the highest improvement in the discounted profit of the breeding program (3.7%), followed by the scenario where all additional traits were included simultaneously (5.1%). The use of a selection index that included growth and carcass traits excluding LW, increased the profit (0.8%), but reduced the benefits resulted from breeding for beef traits together with LW. A moderate decrease in the profit of the breeding program was obtained when adding only LW to the breeding goal (−3.1%), whereas, adding only RFI traits to the breeding goal resulted in a minor increase in the profit (1.4%). Including beef traits with LW in the breeding goal showed to be the most potential option to improve the profitability of the combined dairy and beef production systems and would also enable a higher rate of self-sufficiency in beef. When considering feed efficiency related traits, the inclusion of LW traits in the breeding goal that includes growth and carcass traits could be more profitable than the inclusion of RFI, because the marginal costs of measuring LW can be expected to be lower than for RFI and it is readily available for selection. In addition, before RFI can be implemented as a breeding objective, the genetic correlations between RFI and other breeding goal traits estimated for the studied population as well as information on the most suitable indicator traits for RFI are needed to assess more carefully the consequences of selecting for RFI.     

The effects of grain treatment, grain feed level and grass silage feed value on the performance of and meat quality from, finishing beef cattle

A completely randomised design study involving 132 continental crossbred beef steers was undertaken to evaluate the effects of method of grain treatment and feed level, and grass silage feed value on animal performance, carcass characteristics and meat quality of beef cattle. Winter wheat was harvested and the grain was stored either ensiled crimped and treated with 4.5 l/t of a proprietary acid-based additive (crimped), ensiled whole and treated with 20 kg feed-grade urea per t (urea) or stored conventionally in an open bin treated with 3 l propionic acid per t. Two grass silages, of contrasting feed value (L and H) were ensiled. For the conventional, crimped and urea treatments, grain dry matter (DM) concentrations were 802, 658 and 640 g/kg, respectively. For the L- and H-feed value silages, DM concentrations were 192 and 240 g/kg and D values were 671 and 730 g/kg DM, respectively. The silages were offered as the sole forage supplemented with either conventional, crimped or urea-treated grain-based concentrate at either 3.5 or 6.0 kg DM per steer per day. The grain supplement consisted of 850 and 150 g/kg DM of grain and citrus pulp, respectively. For the conventional, urea and crimped treatments, DM intakes were 8.85, 9.43 and 9.04 kg/day (standard error (s.e.) = 0.129); estimated carcass gains were 0.60, 0.55 and 0.61 kg/day (s.e. = 0.020), respectively. For the low- and high- feed value grass silages, estimated carcass gains were 0.56 and 0.61 kg/day (s.e. = 0.014), respectively. For the low and high grain feed levels, estimated carcass gains were 0.56 and 0.61 kg/day, respectively. Grain treatment, grain feed level or silage feed value did not alter (P > 0.05) meat quality, lean colour or fat colour. There were significant silage feed value × grain feed level interactions (P < 0.05) for final live weight (LW) and daily live-weight gain (DLWG). Increasing grain feed level increased final LW and DLWG when offered with the low-feed value silage, however, grain feed level had no effect on final LW or DLWG when offered with the high-feed value silage. It is concluded that urea treatment of grain increased silage intake and feed conversion ratio (kg DM intake per kg carcass) and tended to decrease carcass gain. Crimping provides a biologically equally effective method to store grain as conventional methods. Improving grass silage feed value had a greater impact on animal performance than increasing grain feed level by 2.4 kg DM per day.     

Productivity and technical efficiency of suckler beef production systems: trends for the period 1990 to 2012

Over the past 23 years (1990 to 2012), French beef cattle farms have expanded in size and increased labour productivity by over 60%, chiefly, though not exclusively, through capital intensification (labour–capital substitution) and simplifying herd feeding practices (more concentrates used). The technical efficiency of beef sector production systems, as measured by the ratio of the volume value (in constant euros) of farm output excluding aids to volume of intermediate consumption, has fallen by nearly 20% while income per worker has held stable thanks to subsidies and the labour productivity gains made. This aggregate technical efficiency of beef cattle systems is positively correlated to feed self-sufficiency, which is in turn negatively correlated to farm and herd size. While volume of farm output per hectare of agricultural area has not changed, forage feed self-sufficiency decreased by 6 percentage points. The continual increase in farm size and labour productivity has come at a cost of lower production-system efficiency – a loss of technical efficiency that 20 years of genetic, technical, technological and knowledge-driven progress has barely managed to offset.     

Intake, growth and carcass traits in male progeny of sires differing in genetic merit for beef production

Validation of economic indexes under a controlled experimental environment, can aid in their acceptance and use as breeding tools to increase herd profitability. The objective of this study was to compare intake, growth and carcass traits in bull and steer progeny of high and low ranking sires, for genetic merit in an economic index. The Beef Carcass Index (BCI; expressed in euro (€) and based on weaning weight, feed intake, carcass weight, carcass conformation and fat scores) was generated by the Irish Cattle Breeding Federation as a tool to compare animals on genetic merit for the expected profitability of their progeny at slaughter. A total of 107 male suckler herd progeny, from 22 late-maturing 'continental' beef sires of high (n = 11) or low (n = 11) BCI were compared under either a bull or steer production system, and slaughtered at approximately 16 and 24 months of age, respectively. All progeny were purchased after weaning at approximately 6 to 8 months of age. Dry matter (DM) intake and live-weight gain in steer progeny offered grazed grass or grass silage alone, did not differ between the two genetic groups. Similarly, DM intake and feed efficiency did not differ between genetic groups during an ad libitum concentrate-finishing period on either production system. Carcasses of progeny of high BCI sires were 14 kg heavier (P < 0.05) than those of low BCI sires. In a series of regression analyses, increasing sire BCI resulted in increases in carcass weight (P < 0.01) and carcass conformation (P = 0.051) scores, and decreases in carcass fat (P < 0.001) scores, but had no effect on weaning weight or DM intake of the progeny. Each unit increase in sire expected progeny difference led to an increase in progeny weaning weight, DM intake, carcass weight, carcass conformation score and carcass fat score of 1.0 (s.e. = 0.53) kg, 1.1 (s.e. = 0.32) kg, 1.3 (s.e. = 0.31) kg, 0.9 (s.e. = 0.32; scale 1 to 15) and 1.0 (s.e. = 0.25; scale 1 to 15), respectively, none of which differed from the theoretical expectation of unity. The expected difference in profitability at slaughter between progeny of the high and low BCI sires was €42, whereas the observed phenotypic profit differential of the progeny was €53 in favour of the high BCI sires. Results from this study indicate that the BCI is a useful tool in the selection of genetically superior sires, and that actual progeny performance under the conditions of this study is within expectations for both bull and steer beef production systems.     

Effects of finishing diet sorting and digestibility on performance and feed efficiency in beef steers

The aim of this study was to test the hypotheses that differences in residual feed intake (RFI) of beef steers are related to diet sorting, diet nutrient composition, energy intake and apparent digestibility. To phenotype steers for RFI, 69 weaned Angus × Hereford steers were fed individually for 56 days. A finishing diet was fed twice daily on an ad libitum basis to maintain approximately 0.5 to 1.0 kg refusals. Diet offered and refused was measured daily, and DM intakes (DMI) were calculated by difference. Body weights were recorded at 14-day intervals following an 18-h solid feed withdrawal. The residual feed intake was determined as the residual of the regression of DMI versus mid-test metabolic BW (BW ^0.75) and average daily gain (ADG). Particle size distributions of diet and refusals were determined using the Penn State Particle Separator to quantify diet sorting. Sampling of diet, refusals and feces were repeated in four sampling periods which occurred during weeks 2, 4, 6 and 8 of the study. Particle size distributions of refusals and diet were analyzed in weeks 2, 4 and 6, and sampling for chemical analysis of refusals and feces occurred in all four periods. Indigestible neutral detergent fiber (288 h in situ) was used as an internal marker of apparent digestibility. We conclude that preference for the intakes of particles > 19 mm and 4 to 8 mm were negatively correlated to RFI and ADG, respectively. Although steers did sort to consume a different diet composition than offered, diet sorting did not impact intake energy, digestible energy or DM digestibility.     

Effect of sire breed on carcass characteristics and meat and fat quality of heavy pigs reared outdoor and intended for dry-cured meat production

A trial was conducted to study the effect of sire line (Duroc (DU) and Pietrain (PI)) on carcass, meat and fat quality of pigs reared outdoor and destined to dry-cured meat production. No differences between sire genotypes were detected in carcass fat thickness (P > 0.10) but carcasses from DU-sired pigs were longer (P < 0.05) and tended to have a higher yield of trimmed shoulders (P = 0.07) and hams (P = 0.06) than carcasses from PI-sired pigs. Loins from DU-sired genotype showed higher (P < 0.05) L* value and lower (P < 0.01) a* value than loins from PI-sired genotype. Pork from DU-sired offspring tended to have higher (P = 0.09) intramuscular fat (IMF) percentage and lower (P < 0.05) moisture proportion than meat from PI-sired offspring. Also, loins from DU-sired pigs had lower (P < 0.001) thawing losses than loins from PI-sired pigs. The subcutaneous fat from the DU-sired line tended to show lower (P = 0.08) percentage of total polyunsaturated fatty acids (PUFAs) than that from the PI-sire line, mostly due to the higher proportion of C18:2 (P = 0.09) and C20:3 (P < 0.01). However, no effect of crossbreed was detected on the total proportion of saturated, monounsaturated fatty acid (MUFAs) or PUFAs of IMF (P > 0.10). We conclude that both sire lines can be used successfully under outdoor conditions but DU boars are more adequate than PI boars for the production of heavy pigs intended for the dry-cured meat industry.     

The impact of divergent breed types and diets on methane emissions,rumen characteristics and performance of finishing beef cattle

This study was undertaken to further develop our understanding of the links between breed, diet and the rumen microbial community and determine their effect on production characteristics and methane (CH₄) emissions from beef cattle. The experiment was of a 2×2 factorial design, comprising two breeds (crossbred Charolais (CHX); purebred Luing (LU)) and two diets (concentrate-straw or silage-based). In total, 80 steers were used and balanced for sire within each breed, farm of origin and BW across diets. The diets (fed as total mixed rations) consisted of (g/kg dry matter (DM)) forage to concentrate ratios of either 500 : 500 (Mixed) or 79 : 921 (Concentrate). Steers were adapted to the diets over a 4-week period and performance and feed efficiency were then measured over a 56-day test period. Directly after the 56-day test, CH₄ and carbon dioxide (CO₂) emissions were measured (six steers/week) over a 13-week period. Compared with LU steers, CHX steers had greater average daily gain (ADG; P<0.05) and significantly (P<0.001) lower residual feed intake. Crossbred Charolais steers had superior conformation and fatness scores (P<0.001) than LU steers. Although steers consumed, on a DM basis, more Concentrate than Mixed diet (P<0.01), there were no differences between diets in either ADG or feed efficiency during the 56-day test. At slaughter, however, Concentrate-fed steers were heavier (P<0.05) and had greater carcass weights than Mixed-fed steers (P<0.001). Breed of steer did not influence CH₄ production, but it was substantially lower when the Concentrate rather than Mixed diet was fed (P<0.001). Rumen fluid from Concentrate-fed steers contained greater proportions of propionic acid (P<0.001) and lower proportions of acetic acid (P<0.001), fewer archaea (P<0.01) and protozoa (P=0.09), but more Clostridium Cluster XIVa (P<0.01) and Bacteroides plus Prevotella (P<0.001) than Mixed-fed steers. When the CH₄ to CO₂ molar ratio was considered as a proxy method for CH₄ production (g/kg DM intake), only weak relationships were found within diets. In conclusion, although feeding Concentrate and Mixed diets produced substantial differences in CH₄ emissions and rumen characteristics, differences in performance were influenced more markedly by breed.     

The effect of floor type on the performance,cleanliness, carcass characteristics and meat quality of dairy origin bulls

The aim of this study was to evaluate the effect of using different floor types to accommodate growing and finishing beef cattle on their performance, cleanliness, carcass characteristics and meat quality. In total, 80 dairy origin young bulls (mean initial live weight 224 kg (SD=28.4 kg)) were divided into 20 blocks with four animals each according to live weight. The total duration of the experimental period was 204 days. The first 101 days was defined as the growing period, with the remainder of the study defined as the finishing period. Cattle were randomly assigned within blocks to one of four floor type treatments, which included fully slatted flooring throughout the entire experimental period (CS); fully slatted flooring covered with rubber strips throughout the entire experimental period (RS); fully slatted flooring during the growing period and moved to a solid floor covered with straw bedding during the finishing period (CS-S) and fully slatted flooring during the growing period and moved to fully slatted flooring covered with rubber strips during the finishing period (CS-RS). Bulls were offered ad libitum grass silage supplemented with concentrates during the growing period. During the finishing period, bulls were offered concentrates supplemented with chopped barley straw. There was no significant effect of floor type on total dry matter intake (DMI), feed conversion ratio, daily live weight gain or back fat depth during the growing and finishing periods. Compared with bulls accommodated on CS, RS and CS-RS, bulls accommodated on CS-S had a significantly lower straw DMI (P<0.01). Although bulls accommodated on CS and CS-S were significantly dirtier compared with those accommodated on RS and CS-RS on days 50 (P<0.05) and 151 (P<0.01), there was no effect of floor type on the cleanliness of bulls at the end of the growing and finishing periods. There was also no significant effect of floor type on carcass characteristics or meat quality. However, bulls accommodated on CS-S had a tendency for less channel, cod and kidney fat (P=0.084) compared with those accommodated on CS, RS and CS-RS. Overall, floor type had no effect on the performance, cleanliness, carcass characteristics or meat quality of growing or finishing beef cattle.     

Genetic parameters for carcass weight,conformation and fat in five beef cattle breeds

Profitability of beef production can be increased by genetically improving carcass traits. To construct breeding value evaluations for carcass traits, breed-specific genetic parameters were estimated for carcass weight, carcass conformation and carcass fat in five beef cattle breeds in Finland (Hereford, Aberdeen Angus, Simmental, Charolais and Limousin). Conformation and fat were visually scored using the EUROP carcass classification. Each breed was separately analyzed using a multitrait animal model. A total of 6879–19 539 animals per breed had phenotypes. For the five breeds, heritabilities were moderate for carcass weight (h²=0.39 to 0.48, s.e.=0.02 to 0.04) and slightly lower for conformation (h²=0.30 to 0.44, s.e.=0.02 to 0.04) and carcass fat (h²=0.29 to 0.44, s.e.=0.02 to 0.04). The genetic correlation between carcass weight and conformation was favorable in all breeds (r_G=0.37 to 0.53, s.e.=0.04 to 0.05), heavy carcasses being genetically more conformed. The phenotypic correlation between carcass weight and carcass fat was moderately positive in all breeds (r_P=0.21 to 0.32), implying that increasing carcass weight was related to increasing fat levels. The respective genetic correlation was the strongest in Hereford (r_G=0.28, s.e.=0.05) and Angus (r_G=0.15, s.e.=0.05), the two small body-sized British breeds with the lowest conformation and the highest fat level. The correlation was weaker in the other breeds (r_G=0.08 to 0.14). For Hereford, Angus and Simmental, more conformed carcasses were phenotypically fatter (r_P=0.11 to 0.15), but the respective genetic correlations were close to zero (r_G=−0.05 to 0.04). In contrast, in the two large body-sized and muscular French breeds, the genetic correlation between conformation and fat was negative and the phenotypic correlation was close to zero or negative (Charolais: r_G=−0.18, s.e.=0.06, r_P=0.02; Limousin: r_G=−0.56, s.e.=0.04, r_P=−0.13). The results indicate genetic variation for the genetic improvement of the carcass traits, favorable correlations for the simultaneous improvement of carcass weight and conformation in all breeds, and breed differences in the correlations of carcass fat.     

Podolian beef production on pasture and in confinement

From February to August 2007 the effect of rearing system (confined (C) v. free ranging (FR)) and season (spring v. summer) was evaluated on behaviour, immune and blood parameters and beef production (experiment 1). From February to August 2008, the effect of rearing system was only evaluated on beef production (experiment 2). A total of 12 Podolian young bulls were used each year. They were slaughtered at 18 and 15 months of age in 2007 and 2008, respectively. Herbage mass and pasture composition were monitored during the 2 years. Pasture availability, in terms of herbage mass and composition, as well as its seasonal development, was similar in the 2 years. In the first experiment, FR animals spent more time walking (P < 0.05), feeding (P < 0.001) and standing (P < 0.01) and showed a lower number of agonistic (P < 0.05) and non-agonistic social interaction than C animals (P < 0.01). Significant lower concentrations of serum urea nitrogen (P < 0.001) and creatinine (P < 0.10) in FR animals indicated a lower protein nutritional status due to inadequate protein availability at pasture. As a consequence, average daily gains (P < 0.05), slaughter weight (P < 0.05) and body condition score (P < 0.01) were lower in grazing animals as compared with C bulls. Cellular immune responsiveness was higher in FR animals (P < 0.05). Similarly, antibody titre to keyhole limpet hemocyanin was higher in FR bulls at the 2nd and 3rd month after antigen injection (P < 0.05), whereas it tended to be higher at the 4th month (P < 0.10). In both experiments, grazing negatively affected meat colour in terms of lightness. Eighteen-month-old bulls also showed lower final weight, weight gain and body conditions when kept outdoor: a possible consequence of nutrient deficits, as suggested by the metabolic status of FR animals. The same animals, however, benefited from FR in terms of natural behaviour expression and immune responsiveness. When the experiment was replicated the subsequent year, on animals slaughtered at 15 months of age, no differences between the performances of FR and C animals were detected. The earlier slaughter age system was also proportionally less dependent on external inputs as grazing was not extended to the dry season when herbage mass availability was lower.     

Live animal measurements, carcass composition and plasma hormone and metabolite concentrations in male progeny of sires differing in genetic merit for beef production

In genetic improvement programmes for beef cattle, the effect of selecting for a given trait or index on other economically important traits, or their predictors, must be quantified to ensure no deleterious consequential effects go unnoticed. The objective was to compare live animal measurements, carcass composition and plasma hormone and metabolite concentrations of male progeny of sires selected on an economic index in Ireland. This beef carcass index (BCI) is expressed in euros and based on weaning weight, feed intake, carcass weight and carcass conformation and fat scores. The index is used to aid in the genetic comparison of animals for the expected profitability of their progeny at slaughter. A total of 107 progeny from beef sires of high (n = 11) or low (n = 11) genetic merit for the BCI were compared in either a bull (slaughtered at 16 months of age) or steer (slaughtered at 24 months of age) production system, following purchase after weaning (8 months of age) from commercial beef herds. Data were analysed as a 2 × 2 factorial design (two levels of genetic merit by two production systems). Progeny of high BCI sires had heavier carcasses, greater (P < 0.01) muscularity scores after weaning, greater (P < 0.05) skeletal scores and scanned muscle depth pre-slaughter, higher (P < 0.05) plasma insulin concentrations and greater (P < 0.01) animal value (obtained by multiplying carcass weight by carcass value, which was based on the weight of meat in each cut by its commercial value) than progeny of low BCI sires. Regression of progeny performance on sire genetic merit was also undertaken across the entire data set. In steers, the effect of BCI on carcass meat proportion, calculated carcass value (c/kg) and animal value was positive (P < 0.01), while a negative association was observed for scanned fat depth pre-slaughter and carcass fat proportion (P < 0.01), but there was no effect in bulls. The effect of sire expected progeny difference (EPD) for carcass weight followed the same trends as BCI. Muscularity scores, carcass meat proportion and calculated carcass value increased, whereas scanned fat depth, carcass fat and bone proportions decreased with increasing sire EPD for conformation score. The opposite association was observed for sire EPD for fat score. Results from this study show that selection using the BCI had positive effects on live animal muscularity, carcass meat proportion, proportions of high-value cuts and carcass value in steer progeny, which are desirable traits in beef production.     

Effects of polymorphic microsatellites in the regulatory region of IGF1 and GHR on growth and carcass traits in beef cattle

Growth hormone (GH), insulin-like growth factors 1 and 2 (IGF1 and IGF2) and their associated binding proteins and transmembrane receptors (GHR, IGF1R and IGF2R) play an important role in the physiology of mammalian growth. The objectives of the present study were to estimate the allele and genotype frequencies of microsatellite markers located in the 5'-regulatory region of the IGF1 and GHR genes in beef cattle belonging to different genetic groups and to determine effects of these markers on growth and carcass traits in these animals under an intensive production system. For this purpose, genotyping was performed on 384 bulls including 79 Nellore, 30 Canchim (5/8 Charolais + 3/8 Zebu) and 275 crossbred animals originating from crosses of Simmental (1/2 Simmental, n = 30) and Angus (1/2 Angus, n = 245) sires with Nellore females. The effects of substituting L allele for S allele of GHR microsatellite across Nellore, Canchim and 1/2 Angus were significant for weight gain and body weight (P < 0.05). The IGF1 microsatellite allele substitutions of 229 for 225 within Nellore group and of 225 for 229 within 1/2 Angus were not significant for any of the traits.     

Effect of slaughter age and feeding system on the neutral and polar lipid composition of horse meat

This study was undertaken to provide a thorough analysis of the neutral lipid (NL) and polar lipid (PL) fractions of horse meat that included the content and distribution of acyl and alkenyl moieties in foals under different rearing conditions. Two groups of crossbred horses were studied; the first group was selected from suckling foals produced under grazing conditions and slaughtered at 4 months of age (n=8), and the second group was selected from concentrate-finished foals and slaughtered at 12 months of age (n=7). There were significant differences related to the age and feeding practices of foals which affected the intramuscular (IM) fat content and the fatty acid (FA) composition of NL and PL fractions. Samples from suckling foals were leaner and provided the highest content of methylation products from the plasmalogenic lipids, and total and n-3 polyunsaturated fatty acid (PUFA). By contrast, the meat from concentrate-finished foals had a higher IM fat level resulting in a greater accumulation of 16:0 and total monounsaturated FAs in the NL fraction, whereas the muscle PL fraction retained a similar FA composition between both groups. Linolenic acid was preferentially deposited in the NL fraction, but linoleic acid and the long-chain n-3 and n-6 PUFAs were incorporated into the PL fraction where they served as cell membrane constituents and in eicosanoid formation.     

Impact of adding nitrate or increasing the lipid content of two contrasting diets on blood methaemoglobin and performance of two breeds of finishing beef steers

Adding nitrate to the diet or increasing the concentration of dietary lipid are effective strategies for reducing enteric methane emissions. This study investigated their effect on health and performance of finishing beef cattle. The experiment was a two×two×three factorial design comprising two breeds (CHX, crossbred Charolais; LU, Luing); two basal diets consisting of (g/kg dry matter (DM), forage to concentrate ratios) 520 : 480 (Mixed) or 84 : 916 (Concentrate); and three treatments: (i) control with rapeseed meal as the main protein source replaced with either (ii) calcium nitrate (18 g nitrate/kg diet DM) or (iii) rapeseed cake (RSC, increasing acid hydrolysed ether extract from 25 to 48 g/kg diet DM). Steers (n=84) were allocated to each of the six basal diet×treatments in equal numbers of each breed with feed offered ad libitum. Blood methaemoglobin (MetHb) concentrations (marker for nitrate poisoning) were monitored throughout the study in steers receiving nitrate. After dietary adaptation over 28 days, individual animal intake, performance and feed efficiency were recorded for a test period of 56 days. Blood MetHb concentrations were low and similar up to 14 g nitrate/kg diet DM but increased when nitrate increased to 18 g nitrate/kg diet DM (P<0.001). An interaction between basal diet and day (P<0.001) indicated that MetHb% was consistently greater in Concentrate – than Mixed-fed steers at 18 g nitrate/kg diet DM. Maximum individual MetHb% was 15.4% (of total Hb), which is lower than considered clinically significant (30%). MetHb concentrations for individual steers remained consistent across time. Concentrate-fed steers were more efficient (lower residual feed intake (RFI) values) than Mixed-fed steers (P<0.01), with lower dry matter intake (DMI) (kg/day) (P<0.001) and similar average daily gain (ADG). CHX steers were more efficient (lower RFI; P<0.01) than LU steers with greater ADG (P<0.01), lower DMI (/kg BW; P<0.01) and lower fat depth (P<0.001). ADG, BW or DMI did not differ across dietary treatments (P>0.05). Neither basal diet nor treatment affected carcass quality (P>0.05), but CHX steers achieved a greater killing out proportion (P<0.001) than LU steers. Thus, adding nitrate to the diet or increasing the level of dietary lipid through the use of cold-pressed RSC, did not adversely affect health or performance of finishing beef steers when used within the diets studied.     

Effect of selection for intramuscular fat on the fatty acid composition of rabbit meat

Intramuscular fat (IMF) content and composition are relevant for the meat industry due to their effect on human health and meat organoleptic properties. A divergent selection experiment for IMF of Longissimus dorsi (LD) muscle was performed in rabbits during eight generations. The aim of this study is to estimate the correlated responses to selection for IMF on the fatty acid composition of LD. Response to selection for IMF was 0.34 g/100 g of LD, representing 2.4 phenotypic SD of the trait. High-IMF line showed 9.20% more monounsaturated fatty acids (MUFA) and 0.39%, 9.97% and 10.3% less n-3, n-6 and polyunsaturated fatty acids (PUFA), respectively, than low-IMF line. The main MUFA and PUFA individual fatty acids followed a similar pattern, except for C18:3n-3 that was greater in the high-IMF line. We did not observe differences between lines for the percentage of total saturated fatty acids, although high-IMF line showed greater C14:0 and C16:0 and lower C18:0 percentages than low-IMF line. Heritability estimates were generally high for all fatty acids percentages, ranging from 0.43 to 0.59 with a SD around 0.08, showing an important genetic component on these traits. Genetic correlations between IMF and LD fatty acid percentages were strong and positive for C14:0, C16:1, C18:1n-9, and MUFA, ranging from 0.88 to 0.97, and strong and negative for C18:0, C18:2n-6, C20:4n-6, n-6 and PUFA, ranging from −0.83 to −0.91. These correlations were accurately estimated, with SD ranging from 0.02 to 0.06. The genetic correlations between IMF and other fatty acids were estimated with lower accuracy. In general, phenotypic and genetic correlations were of the same order. Our experiment shows that selection for IMF strongly affects the fatty acid composition of meat, due the high heritabilities of fatty acids and their high genetic correlations with IMF.     

Assessment of welfare of finishing beef cattle kept on different types of floor after short- or long-term housing

This study aimed at evaluating short- and long-term effects of housing beef cattle on deep litter (DL) or concrete fully slatted floor (FS) on their welfare. Animal-based measures of the Welfare Quality® assessment protocol for cattle were used to assess health status and behaviour of bulls. The assessment was carried out in a large commercial farm on 15 batches of bulls (4 DL and 11 FS) 1 month after their receiving day (short-term) and on 12 batches (three DL and nine FS) the week before slaughter (long-term). Signs of better comfort on deep litter in terms of shorter lying down durations (5.1±0.5 v. 6.5±0.4 s; P<0.05) and lower risk of hairless patches (odds ratio=0.09; 95% confidence interval=0.01 to 0.68; P<0.05) were already observed after 1 month. Heavy bulls after a long-term housing on FS showed a higher prevalence of bursitis, hairless patches and lesions/swellings than animals on DL. Bulls on fully slatted floor were at higher risk of early culling (odds ratio=6.44; 95% confidence interval=1.57 to 26.37; P<0.01), mainly due to musculoskeletal system pathologies/lameness. Deep litter proved to be a valid alternative to slatted floor, making animals more confident to interact with powerful movements such as mounting at the end of the finishing period. A negative aspect of the deep litter was the poor cleanliness of the bulls. Compared with the fully slatted floor, there were higher odds ratios for dirty bulls at both, the short- (odds ratio=25.09; 95% confidence interval=8.96 to 70.22; P<0.001) and the long-term housing (odds ratio=276.13; 95% confidence interval=98.21 to 776.38; P<0.001). In order to improve health and welfare of beef cattle finished at a heavy weight, deep litter systems are a promising alternative to fully slatted floors. However, proper management of deep litter is necessary to maintain satisfactory cleanliness of the bulls.