An alternative structure model for the polypentapeptide in elastin

Polypentapeptides (GVGVP)n which are designed in analogy to the connective tissue protein elastin are reported to transform various kinds of energy into mechanical work by the so-called deltaT(t)-mechanism in cross-linked macroscopic polypentapeptide (PPP) films. In the literature, the responsible element of conformation in such polypeptides is described as a beta-spiral and the deltaT(t) effect is explained as a sudden change of macroconformation of single polypeptide molecules from an extended but not regular state below a transition temperature T(t) to the beta-spiral above T(t). We examined the secondary structure of the linear PPP C(GVGVP)6 in solution with DSC, CD, UV absorption, FTIR and NMR spectroscopy. The results suggest that the beta-spiral is not present in the conformational structure of the PPP molecules. The antiparallel beta-sheet is proposed to be the basic regular part of conformation because it agrees with all spectroscopic data. As a consequence, the elasticity of natural elastin must be considered from a new perspective.     

An infrared spectroscopic study of the conformational transition of elastin-like polypeptides

The infrared spectroscopy of elastin-like polypeptides and the relation to the inverse thermal transition are discussed. To correlate the spectroscopic observations with structure a density function theory model was created that captures the essential hydrogen bonding and packing of the beta-spiral structure proposed for elastin and elastin-like polypeptides. The infrared spectrum was calculated using periodic boundary conditions and a method for estimating the difference dipole moment permits both frequencies and intensities to be obtained for the modeling of spectra. The two observed amide I bands at 1615 cm(-1) and 1656 cm(-1) are shown to arise from the beta-spiral structure. The increase in intensity of these bands with increasing salt concentration and temperature is assigned to the closer association of strands of the beta-spiral. The sharp inverse temperature transition is observed within 1 degrees C and involves a change in secondary structure that involves formation of interstrand beta-sheets for approximately 25% of the amino acids. This conclusion is consistent with available data and simulations that have been reported to date.     

Nuclear Overhauser effect and computational characterization of the beta-spiral of the polypentapeptide of elastin

The structure of the elastin polypentapeptide, poly(VPGVG), was studied by nuclear Overhauser effect experiments using perdeuterated Val1 and Val4 samples under the condition where intermolecular interactions are absent. More extensive interaction was found between the Val1 gamma CH and Pro2 beta CH protons than between the Val4 gamma CH and Pro2 beta CH protons. The Val1 gamma CH3-Pro2 beta CH interaction does not occur within the same pentamer as previously shown experimentally and as expected from steric considerations. The results are incompatible with the presence of a random chain network in poly(VPGVG) at room temperature but are readily explicable in terms of interturn interactions in a beta-spiral structure. More specifically, the results indicate that the beta-spiral conformation with 2.9 pentamers/turn is more prevalent than that with 2.7 pentamers/turn. Using conformations developed by molecular mechanics calculations, molecular dynamics simulations were carried out to compare the relative energies of these two variants of this class of beta-spiral structures. It was found in vacuo that the structure with 2.9 pentamers/turn is indeed more stable than that of 2.7 pentamers/turn by approximately 1 kcal/mole-pentamer.     

Adenovirus fibre shaft sequences fold into the native triple beta-spiral fold when N-terminally fused to the bacteriophage T4 fibritin foldon trimerisation motif

Adenovirus fibres are trimeric proteins that consist of a globular C-terminal domain, a central fibrous shaft and an N-terminal part that attaches to the viral capsid. In the presence of the globular C-terminal domain, which is necessary for correct trimerisation, the shaft segment adopts a triple beta-spiral conformation. We have replaced the head of the fibre by the trimerisation domain of the bacteriophage T4 fibritin, the foldon. Two different fusion constructs were made and crystallised, one with an eight amino acid residue linker and one with a linker of only two residues. X-ray crystallographic studies of both fusion proteins shows that residues 319-391 of the adenovirus type 2 fibre shaft fold into a triple beta-spiral fold indistinguishable from the native structure, although this is now resolved at a higher resolution of 1.9 A. The foldon residues 458-483 also adopt their natural structure. The intervening linkers are not well ordered in the crystal structures. This work shows that the shaft sequences retain their capacity to fold into their native beta-spiral fibrous fold when fused to a foreign C-terminal trimerisation motif. It provides a structural basis to artificially trimerise longer adenovirus shaft segments and segments from other trimeric beta-structured fibre proteins. Such artificial fibrous constructs, amenable to crystallisation and solution studies, can offer tractable model systems for the study of beta-fibrous structure. They can also prove useful for gene therapy and fibre engineering applications.     

Structure of the carboxy-terminal receptor-binding domain of avian reovirus fibre sigmaC

Avian reovirus fibre, a homo-trimer of the sigmaC protein, is responsible for primary host cell attachment. The protein expressed in bacteria forms elongated fibres comprised of a carboxy-terminal globular head domain and a slender shaft, and partial proteolysis yielded a carboxy-terminal protease-stable domain that was amenable to crystallisation. Here, we show that this fragment retains receptor-binding capability and report its structure, solved using two-wavelength anomalous diffraction and refined using data collected from three different crystal forms at 2.1 angstroms, 2.35 angstroms and 3.0 angstroms resolution. The carboxy-terminal globular domain has a beta-barrel fold with the same overall topology as the mammalian reovirus fibre (sigma1). However, the monomers of the sigmaC trimer show a more splayed-out arrangement than in the sigma1 structure. Also resolved are two triple beta-spiral repeats of the shaft or stalk domain. The presence in the sequence of heptad repeats amino-terminal to these triple beta-spiral repeats suggests that the unresolved portion of the shaft domain contains a triple alpha-helical coiled-coil structure. Implications for the function and stability of the sigmaC protein are discussed.     

Studies on the conformation and interactions of elastin: nuclear magnetic resonance of the polyhexapeptide.

Synthesis, proton magnetic resonance and carbon-13 magnetic resonance characterizations, including complete assignments, are reported for the polyhexapeptide of elastin, HCO-Val(Ala1-Pro2-Gly3-Val4-Gly5-Val6)18-OMe. Temperature dependence of peptide NH chemical shifts and solvent dependence of peptide C-O chemical shifts have been determined in several solvents and have been interpreted in terms of four hydrogen bonded rings for each repeat of the polyhexapeptide. The more stable hydrogen bonded ring is a beta-turn involving Ala1C-O--HN-Val4. More dynamic hydrogen bonds are an 11-atom hydrogen bonded ring Gly3NH--O-C Gly5, a 7-atom hydrogen bonded ring (a gamma-turn) Gly3 C-O--NH-Gly5, and a 23-atom hydrogen bonded ring Val6inH--O-C Val6(i+1). This set of hydrogen bonds results in a right-handed beta-spiral structure with slightly more than two repeats (approximately 2.2) per turn of spiral. The beta-spiral structure is briefly discussed relative to data on the elastic fiber.     

Structure characterization of the central repetitive domain of high molecular weight gluten proteins. II. Characterization in solution and in the dry state.

The structure of the central repetitive domain of high molecular weight HMW) wheat gluten proteins was characterized in solution and in the dry state using HMW proteins Bx6 and Bx7 and a subcloned, bacterially expressed part of the repetitive domain of HMW Dx5. Model studies of the HMW consensus peptides PGQGQQ and GYYPTSPQQ formed the basis for the data analysis (van Dijk AA et al., 1997, Protein Sci 6:637-648). In solution, the repetitive domain contained a continuous nonoverlapping series of both type I and type II II beta-turns at positions predicted from the model studies; type II beta-turns occurred at QPGQ and QQGY sequences and type I beta-turns at YPTS and SPQQ. The subcloned part of the HMW Dx5 repetitive domain sometimes migrated as two bands on SDS-PAGE; we present evidence that this may be caused by a single amino acid insertion that disturbs the regular structure of beta-turns. The type I beta-turns are lost when the protein is dried on a solid surface, probably by conversion to type II beta-turns. The homogeneous type II beta-turn distribution is compatible with the formation of a beta-spiral structure, which provides the protein with elastic properties. The beta-turns and thus the beta-spiral are stabilized by hydrogen bonds within and between turns. Reformation of this hydrogen bonding network after, e.g., mechanical disruption may be important for the elastic properties of gluten proteins.     

CryoEM structure at 9A resolution of an adenovirus vector targeted to hematopoietic cells

We report a sub-nanometer resolution cryo-electron microscopy (cryoEM) structural analysis of an adenoviral vector, Ad35F, comprised of an adenovirus type 5 (Ad5) capsid pseudo-typed with an Ad35 fiber. This vector transduces human hematopoietic cells via association of its fiber protein with CD46, a member of the complement regulatory protein family. Major advances in data acquisition and image processing allowed a significant improvement in resolution compared to earlier structures. Analysis of the cryoEM density was enhanced by docking the crystal structures of both the hexon and penton base capsid proteins. CryoEM density was observed for hexon residues missing from the crystal structure that include hypervariable regions and the epitope of a neutralizing monoclonal antibody. Within the penton base, density was observed for the integrin-binding RGD loop missing from the crystal structure and for the flexible beta ribbon of the variable loop on the side of the penton base. The Ad35 fiber is flexible, consistent with the sequence insert in the third beta-spiral repeat. On the inner capsid surface density is revealed at the base of the hexons and below the penton base. A revised model is presented for protein IX within the virion. Well-defined density was assigned to a conserved domain in the N terminus of protein IX required for incorporation into the virion. For the C-terminal domain of protein IX two alternate conformations are proposed, either binding on the capsid surface or extending away from the capsid. This model is consistent with the tolerance of the C terminus for inserted ligands and its potential use in vector retargeting. This structural study increases our knowledge of Ad capsid assembly, antibody neutralization mechanisms, and may aid further improvements in gene delivery to important human cell types.     

Solid-state NMR analysis of a peptide (Gly-Pro-Gly-Gly-Ala)6-Gly derived from a flagelliform silk sequence of Nephila clavipes

Solid-state NMR is especially useful when the structures of peptides and proteins should be analyzed by taking into account the structural distribution, that is, the distribution of the torsion angle of the individual residue. In this study, two-dimensional spin-diffusion solid-state NMR spectra of 13C-double-labeled model peptides (GPGGA)6G of flagelliform silk were observed for studying the local structure in the solid state. The spin-diffusion NMR spectra calculated by assuming the torsion angles of the beta-spiral structure exclusively could not reproduce the observed spectra. In contrast, the spectra calculated by taking into account the statistical distribution of the torsion angles of the individual central residues in the sequences Ala-Gly-Pro, Gly-Pro-Gly, Pro-Gly-Gly, Gly-Gly-Ala, and Gly-Ala-Gly from PDB data could reproduce the observed spectra well. This indicates that the statistical distribution of the torsion angles should be considered for the structural model of (GPGGA)6G similar to the case of the model peptide of elastin.     

Raman spectroscopy of secondary structure of elastinlike polymer poly(GVGVP)

Raman spectra of the elastinlike polypentapeptide poly(GVGVP) were measured in H(2)O and D(2)O as solutions and, after increasing the temperature, as suspensions and sediments. In addition, spectra of the polypentapeptide in the solutions of increasing concentration and in the solid state were also investigated by gradually evaporating the water. Significant changes in band frequencies, intensities, and shapes were found for selected Raman bands in the measured spectra, particularly for the C-H stretching, the glycine CH(2) wagging, and some amide vibrations. The C-H stretching vibrations are influenced predominantly by the presence of water, the glycine CH(2) wagging vibrations are associated with conformational transitions. Three possible types of poly(GVGVP)s in the presence of water were indicated: polymer chains in a relatively extended state in the solution, a beta-spiral structure in the suspension, and irregularly bent chains in the sediment.     

Size and shape of the repetitive domain of high molecular weight wheat gluten proteins. I. Small-angle neutron scattering

The solution structure of the central repetitive domain of high molecular weight (HMW) wheat gluten proteins has been investigated for a range of concentrations and temperatures using mainly small-angle neutron scattering. A representative part of the repetitive domain (dB1) was studied as well as an "oligomer" basically consisting of four dB1 units, which has a length similar to the complete central domain. The scattering data over the entire angular range of both proteins are in quantitative agreement with a structural model based on a worm-like chain, a model frequently used in polymer theory. This model describes the "supersecondary structure" of dB1 and dB4 as a semiflexible cylinder with a length of about 235 and 900 A, respectively, and a cross-sectional diameter of about 15 A. The flexibility of both proteins is characterized by a persistence length of about 13 A. Their structures are thus quantitatively identical, which implies that the central HMW domain can be elongated while retaining its structural characteristics. It seems conceivable that the flexible cylinder results from a helical structure, which resembles the beta-spiral observed in earlier studies on gluten proteins and elastin. However, compared to the previously proposed structure of a (stiff) rod, our experiments clearly indicate flexibility of the cylinder.     

Model peptide studies of sequence repeats derived from the intracrystalline biomineralization protein, SM50. II. Pro,Asn-rich tandem repeats

In the biomineralization process, a number of Pro-rich proteins participate in the formation of three-dimensional supramolecular structures. One such protein superfamily, the Pro,Gly-rich sea urchin intracrystalline spicule matrix proteins, form protein-protein supramolecular assemblies that modify the microstructure of the inorganic mineral phase (calcite) within embryonic sea urchin spicules and adult sea urchin spines. These proteins represent a useful model for understanding Pro sequence usage and the resulting generation of extended or "open" structures for protein-protein and/or protein-crystal recognition. In the sea urchin spicule matrix protein, SM50 (Strongylocentrotus purpuratus), there exists an unusual 20-residue Pro,Asn-containing repeat, &bond;PNNPNNPNPNNPNNPNNPNPbond which links the upstream 15-residue C-terminal domain and the downstream 211-residue beta-spiral repeat domain. To define the structural preferences of this 20-residue repeat, we created a 20-residue N- and C-terminal "capped" peptidomimetic of this sequence. Using far-uv CD dichroism, CH(alpha) and alpha-(15)N conformational shifts, (3)J(NH-CHalpha) coupling constants, sequential d(NN(i, i + 1)) rotating frame nuclear Overhauser effect connectivities, d(alphaN(i, i + 1))/d(NN(i, i + 1)) intensity ratios, amide temperature shift coefficients, amide solvent exchange, and simulated annealing refinement protocols, we have determined that this 20-residue repeat motif adopts an extended "twist" structure consisting of turn- and coil-like regions. These findings are consistent with previous studies, which have shown that Pro-rich tandem repeats adopt extended, flexible structures in solution. We hypothesize that this 20-residue repeat may fulfill the role of a mineral-binding domain, a protein-protein docking domain, or as an internal "molecular spacer" for the SM50 protein during spicule biocomposite formation.     

Crystal structure of reovirus attachment protein sigma1 reveals evolutionary relationship to adenovirus fiber.

Reovirus attaches to cellular receptors with the sigma1 protein, a fiber-like molecule protruding from the 12 vertices of the icosahedral virion. The crystal structure of a receptor-binding fragment of sigma1 reveals an elongated trimer with two domains: a compact head with a new beta-barrel fold and a fibrous tail containing a triple beta-spiral. Numerous structural and functional similarities between reovirus sigma1 and the adenovirus fiber suggest an evolutionary link in the receptor-binding strategies of these two viruses. A prominent loop in the sigma1 head contains a cluster of residues that are conserved among reovirus serotypes and are likely to form a binding site for junction adhesion molecule, an integral tight junction protein that serves as a reovirus receptor. The fibrous tail is mainly responsible for sigma1 trimer formation, and it contains a highly flexible region that allows for significant movement between the base of the tail and the head. The architecture of the trimer interface and the observed flexibility indicate that sigma1 is a metastable structure poised to undergo conformational changes upon viral attachment and cell entry.     

Crystal structure of human beta2-glycoprotein I: implications for phospholipid binding and the antiphospholipid syndrome

The high affinity of human plasma beta2-glycoprotein I (beta(2)GPI), also known as apolipoprotein-H (ApoH), for negatively charged phospholipids determines its implication in a variety of physiological pathways, including blood coagulation and the immune response. beta(2)GPI is considered to be a cofactor for the binding of serum autoantibodies from antiphospholipid syndrome (APS) and correlated with thrombosis, lupus erythematosus and recurrent fetal loss. We solved the beta(2)GPI structure from a crystal form with 84% solvent and present a model containing all 326 amino acid residues and four glycans. The structure reveals four complement control protein modules and a distinctly folding fifth C-terminal domain arranged like beads on a string to form an elongated J-shaped molecule. Domain V folds into a central beta-spiral of four antiparallel beta-sheets with two small helices and an extended C-terminal loop region. It carries a distinct positive charge and the sequence motif CKNKEKKC close to the hydrophobic loop composed of residues LAFW (313-316), resulting in an excellent counterpart for interactions with negatively charged amphiphilic substances. The beta(2)GPI structure reveals potential autoantibody-binding sites and supports mutagenesis studies where Trp316 and CKNKEKKC have been found to be essential for the phospholipid-binding capacity of beta(2)GPI.     

Crystal structure of a heat and protease-stable part of the bacteriophage T4 short tail fibre.

Adsorption of T4 bacteriophage to the Escherichia coli host cell is mediated by six long and six short tail fibres. After at least three long tail fibres have bound, short tail fibres extend and bind irreversibly to the core region of the host cell lipopolysaccharide (LPS), serving as inextensible stays during penetration of the cell envelope by the tail tube. The short tail fibres consist of a parallel, in-register, trimer of gene product 12 (gp12). The 1.9 A crystal structure of a heat and protease-stable fragment of gp12 reveals three new folds: a central right-handed triple beta-helix, a globular C-terminal domain containing a beta-sandwich and an N-terminal beta-structure reminiscent of but different from the adenovirus triple beta-spiral. The centre of the C-terminal domain shows weak homology to gp11, a trimeric protein connecting the short fibre to the base-plate, suggesting that the trimerisation motifs of gp11 and gp12 are similar. Repeating sequence motifs suggest that the N-terminal beta-structure extends further towards the N terminus and is conserved in the long tail fibre proteins gp34 and gp37.     

大肠杆菌表达的重组猪β2微球蛋白二级结构的圆二色谱分析

摘要：【目的】研究巴马小型猪β2微球蛋白（β2m）的结构和功能。【方法】亚克隆巴马小型猪β2m的成熟肽部分,并构建与pMAL-p2X的重组质粒,转化大肠杆菌TB1并诱导后,融合表达蛋白分别经过 Western-blot、纯化及Factor Xa切割,分离纯化单体蛋白。圆二色谱(circular dichroism spectrum, CD)测定蛋白的二级结构。【结果】重组表达的融合蛋白MBP-β2m大小为52.1 kDa。切割后去除MBP的单体蛋白大小为10.6 kDa。圆二色谱分析单体蛋白β2m二级结构     

Characterization of a cDNA encoding a protein involved in formation of the skeleton during development of the sea urchin Lytechinus pictus.

In order to investigate the role of proteins in the formation of mineralized tissues during development, we have isolated a cDNA that encodes a protein that is a component of the organic matrix of the skeletal spicule of the sea urchin, Lytechinus pictus. The expression of the RNA encoding this protein is regulated over development and is localized to the descendents of the micromere lineage. Comparison of the sequence of this cDNA to homologous cDNAs from other species of urchin reveal that the protein is basic and contains three conserved structural motifs: a signal peptide, a proline-rich region, and an unusual region composed of a series of direct repeats. Studies on the protein encoded by this cDNA confirm the predicted reading frame deduced from the nucleotide sequence and show that the protein is secreted and not glycosylated. Comparison of the amino acid sequence to databases reveal that the repeat domain is similar to proteins that form a unique beta-spiral supersecondary structure.