Assembly and architecture of Escherichia coli divisome proteins FtsA and FtsZ

During Escherichia coli cell division, an intracellular complex of cell division proteins known as the Z-ring assembles at midcell during early division and serves as the site of constriction. While the predominant protein in the Z-ring is the widely conserved tubulin homolog FtsZ, the actin homolog FtsA tethers the Z-ring scaffold to the cytoplasmic membrane by binding to FtsZ. While FtsZ is known to function as a dynamic, polymerized GTPase, the assembly state of its partner, FtsA, and the role of ATP are still unclear. We report that a substitution mutation in the FtsA ATP-binding site impairs ATP hydrolysis, phospholipid vesicle remodeling in vitro, and Z-ring assembly in vivo. We demonstrate by transmission electron microscopy and Förster Resonance Energy Transfer that a truncated FtsA variant, FtsA(ΔMTS) lacking a C-terminal membrane targeting sequence, self assembles into ATP-dependent filaments. These filaments coassemble with FtsZ polymers but are destabilized by unassembled FtsZ. These findings suggest a model wherein ATP binding drives FtsA polymerization and membrane remodeling at the lipid surface, and FtsA polymerization is coregulated with FtsZ polymerization. We conclude that the coordinated assembly of FtsZ and FtsA polymers may serve as a key checkpoint in division that triggers cell wall synthesis and division progression.     

FtsA forms actin-like protofilaments

FtsA is an early component of the Z‐ring, the structure that divides most bacteria, formed by tubulin‐like FtsZ. FtsA belongs to the actin family of proteins, showing an unusual subdomain architecture. Here we reconstitute the tethering of FtsZ to the membrane via FtsA's C‐terminal amphipathic helix in vitro using Thermotoga maritima proteins. A crystal structure of the FtsA:FtsZ interaction reveals 16 amino acids of the FtsZ tail bound to subdomain 2B of FtsA. The same structure and a second crystal form of FtsA reveal that FtsA forms actin‐like protofilaments with a repeat of 48 Å. The identical repeat is observed when FtsA is polymerized using a lipid monolayer surface and FtsAs from three organisms form polymers in cells when overexpressed, as observed by electron cryotomography. Mutants that disrupt polymerization also show an elongated cell division phenotype in a temperature‐sensitive FtsA background, demonstrating the importance of filament formation for FtsA's function in the Z‐ring.     

Bacterial Division Proteins FtsZ and ZipA Induce Vesicle Shrinkage and Cell Membrane Invagination

Permeable vesicles containing the proto-ring anchoring ZipA protein shrink when FtsZ, the main cell division protein, polymerizes in the presence of GTP. Shrinkage, resembling the constriction of the cytoplasmic membrane, occurs at ZipA densities higher than those found in the cell and is modulated by the dynamics of the FtsZ polymer. In vivo, an excess of ZipA generates multilayered membrane inclusions within the cytoplasm and causes the loss of the membrane function as a permeability barrier. Overproduction of ZipA at levels that block septation is accompanied by the displacement of FtsZ and two additional division proteins, FtsA and FtsN, from potential septation sites to clusters that colocalize with ZipA near the membrane. The results show that elementary constriction events mediated by defined elements involved in cell division can be evidenced both in bacteria and in vesicles.     

Dominant C-terminal deletions of FtsZ that affect its ability to localize in Caulobacter and its interaction with FtsA

The cell division protein FtsZ is composed of three regions based on sequence similarity: a highly conserved N-terminal region of ≈320 amino acids; a variable spacer region; and a conserved C-terminal region of eight amino acids. We show that FtsZ mutants missing different C-terminal fragments have dominant lethal effects because they block cell division in Caulobacter crescentus by two different mechanisms. Removal of the C-terminal conserved region, the linker, and 40 amino acids from the end of the N-terminal conserved region (FtsZΔC281) prevents the localization or the polymerization of FtsZ. Because two-hybrid analysis indicates that FtsZΔC281 does not interact with FtsZ, we hypothesize that FtsZΔC281 blocks cell division by competing with a factor required for FtsZ localization or that it titrates a factor required for the stability of the FtsZ ring. The removal of 24 amino acids from the C-terminus of FtsZ (FtsZΔC485) causes a punctate pattern of FtsZ localization and affects its interaction with FtsA. This suggests that the conserved C-terminal region of FtsZ is required for proper polymerization of FtsZ in Caulobacter and for its interaction with FtsA.     

FtsZ(236-245)区域的两性螺旋特性对大肠埃希氏菌FtsZ组装和功能的影响

【目的】探索大肠埃希氏菌(Escherichia coli,E.coli)FtsZ(236-245)结构域两性螺旋特性对FtsZ组装和FtsZ-FtsA相互作用的影响。【方法】利用分子克隆和定点突变技术,构建FtsZ及其突变体表达载体,亲和纯化获得相应目标蛋白;通过同源重组和Pl转导构建QN23-QN29菌株;利用活细胞成像观察FtsZ及其突变体的胞内定位特点;膜蛋白分离和Western blot分析FtsZ突变体的膜结合特性变化;非变性胶分离和体外聚合分析检测定点突变对FtsZ单体组装特性的影响;免疫沉淀和Far Western blot实验检测FtsZ/FtsZ~*-FtsA间的相互作用。【结果】FtsZ~(E234A/K)和FtsZ~(E241A/K)突变体的功能活性降低、备突变体在E.coli内不能正确定位和形成功能性Z环;E237A/K和E241A/K位点突变致备突变体聚合能力降低、FtsZ*-FtsA的相互作用减弱和FtsZ的膜结合特性变化。【结论】E237和E241是影响FtsZ(236-245)区域两性螺旋特性和FtsZ组装及FtsZ-FtsA相互作用的重要氨基酸。     

FtsZ dynamics in bacterial division: What,how, and why?

Bacterial cell division is orchestrated by the divisome, a protein complex centered on the tubulin homolog FtsZ. FtsZ polymerizes into a dynamic ring that defines the division site, recruits downstream proteins, and directs peptidoglycan synthesis to drive constriction. Recent studies have documented treadmilling of FtsZ polymer clusters both in cells and in vitro. Emerging evidence suggests that FtsZ dynamics are regulated largely by intrinsic properties of FtsZ itself and by the membrane anchoring protein FtsA. Although FtsZ dynamics are broadly required for Z-ring assembly, their role(s) during constriction may vary among bacterial species. These recent advances set the stage for future studies to investigate how FtsZ dynamics are physically and/or functionally coupled to peptidoglycan metabolic enzymes to direct efficient division.     

Crystal structure of FtsA from Staphylococcus aureus

The bacterial cell-division protein FtsA anchors FtsZ to the cytoplasmic membrane. But how FtsA and FtsZ interact during membrane division remains obscure. We have solved 2.2 Å resolution crystal structure for FtsA from Staphylococcus aureus. In the crystals, SaFtsA molecules within the dimer units are twisted, in contrast to the straight filament of FtsA from Thermotoga maritima, and the half of S12–S13 hairpin regions are disordered. We confirmed that SaFtsZ and SaFtsA associate in vitro, and found that SaFtsZ GTPase activity is enhanced by interaction with SaFtsA.     

A novel membrane anchor for FtsZ is linked to cell wall hydrolysis in Caulobacter crescentus

In most bacteria, the tubulin‐like GTPase FtsZ forms an annulus at midcell (the Z‐ring) which recruits the division machinery and regulates cell wall remodeling. Although both activities require membrane attachment of FtsZ, few membrane anchors have been characterized. FtsA is considered to be the primary membrane tether for FtsZ in bacteria, however in Caulobacter crescentus, FtsA arrives at midcell after stable Z‐ring assembly and early FtsZ‐directed cell wall synthesis. We hypothesized that additional proteins tether FtsZ to the membrane and demonstrate that in C. crescentus, FzlC is one such membrane anchor. FzlC associates with membranes directly in vivo and in vitro and recruits FtsZ to membranes in vitro. As for most known membrane anchors, the C‐terminal peptide of FtsZ is required for its recruitment to membranes by FzlC in vitro and midcell recruitment of FzlC in cells. In vivo, overproduction of FzlC causes cytokinesis defects whereas deletion of fzlC causes synthetic defects with dipM, ftsE and amiC mutants, implicating FzlC in cell wall hydrolysis. Our characterization of FzlC as a novel membrane anchor for FtsZ expands our understanding of FtsZ regulators and establishes a role for membrane‐anchored FtsZ in the regulation of cell wall hydrolysis.     

Characterization of ftsZ Mutations that Render Bacillus subtilis Resistant to MinC

Background

Cell division in Bacillus subtilis occurs precisely at midcell. Positional control of cell division is exerted by two mechanisms: nucleoid occlusion, through Noc, which prevents division through nucleoids, and the Min system, where the combined action of the MinC, D and J proteins prevents formation of the FtsZ ring at cell poles or recently completed division sites.

Methodology/Principal Findings

We used a genetic screen to identify mutations in ftsZ that confer resistance to the lethal overexpression of the MinC/MinD division inhibitor. The FtsZ mutants were purified and found to polymerize to a similar or lesser extent as wild type FtsZ, and all mutants displayed reduced GTP hydrolysis activity indicative of a reduced polymerization turnover. We found that even though the mutations conferred in vivo resistance to MinC/D, the purified FtsZ mutants did not display strong resistance to MinC in vitro.

Conclusions/Significance

Our results show that in B. subtilis, overproduction of MinC can be countered by mutations that alter FtsZ polymerization dynamics. Even though it would be very likely that the FtsZ mutants found depend on other Z-ring stabilizing proteins such as ZapA, FtsA or SepF, we found this not to be the case. This indicates that the cell division process in B. subtilis is extremely robust.     

3D-SIM Super-resolution of FtsZ and Its Membrane Tethers in Escherichia coli Cells

FtsZ, a bacterial homolog of eukaryotic tubulin, assembles into the Z ring required for cytokinesis. In Escherichia coli, FtsZ interacts directly with FtsA and ZipA, which tether the Z ring to the membrane. We used three-dimensional structured illumination microscopy to compare the localization patterns of FtsZ, FtsA, and ZipA at high resolution in Escherichia coli cells. We found that FtsZ localizes in patches within a ring structure, similar to the pattern observed in other species, and discovered that FtsA and ZipA mostly colocalize in similar patches. Finally, we observed similar punctate and short polymeric structures of FtsZ distributed throughout the cell after Z rings were disassembled, either as a consequence of normal cytokinesis or upon induction of an endogenous cell division inhibitor.     

AAA+ Chaperone ClpX Regulates Dynamics of Prokaryotic Cytoskeletal Protein FtsZ

AAA⁺ chaperone ClpX has been suggested to be a modulator of prokaryotic cytoskeletal protein FtsZ, but the details of recognition and remodeling of FtsZ by ClpX are largely unknown. In this study, we have extensively investigated the nature of FtsZ polymers and mechanisms of ClpX-regulated FtsZ polymer dynamics. We found that FtsZ polymerization is inhibited by ClpX in an ATP-independent manner and that the N-terminal domain of ClpX plays a crucial role for the inhibition of FtsZ polymerization. Single molecule analysis with high speed atomic force microscopy directly revealed that FtsZ polymer is in a dynamic equilibrium between polymerization and depolymerization on a time scale of several seconds. ClpX disassembles FtsZ polymers presumably by blocking reassembly of FtsZ. Furthermore, Escherichia coli cells overproducing ClpX and N-terminal domain of ClpX show filamentous morphology with abnormal localization of FtsZ. These data together suggest that ClpX modulates FtsZ polymer dynamics in an ATP-independent fashion, which is achieved by interaction between the N-terminal domain of ClpX and FtsZ monomers or oligomers.     

The C‐terminal linker of Escherichia coli FtsZ functions as an intrinsically disordered peptide

The tubulin homologue FtsZ provides the cytoskeletal framework and constriction force for bacterial cell division. FtsZ has an ～ 50‐amino‐acid (aa) linker between the protofilament‐forming globular domain and the C‐terminal (Ct) peptide that binds FtsA and ZipA, tethering FtsZ to the membrane. This Ct‐linker is widely divergent across bacterial species and thought to be an intrinsically disordered peptide (IDP). We confirmed that the Ct‐linkers from three bacterial species behaved as IDPs in vitro by circular dichroism and trypsin proteolysis. We made chimeras, swapping the Escherichia coli linker for Ct‐linkers from other bacteria, and even for an unrelated IDP from human α‐adducin. Most substitutions allowed for normal cell division, suggesting that sequence of the IDP did not matter. With few exceptions, almost any sequence appears to work. Length, however, was important: IDPs shorter than 43 or longer than 95 aa had compromised or no function. We conclude that the Ct‐linker functions as a flexible tether between the globular domain of FtsZ in the protofilament, and its attachment to FtsA/ZipA at the membrane. Modelling the Ct‐linker as a worm‐like chain, we predict that it functions as a stiff entropic spring linking the bending protofilaments to the membrane.     

Adenine Nucleotide-dependent Regulation of Assembly of Bacterial Tubulin-like FtsZ by a Hypermorph of Bacterial Actin-like FtsA

Cytokinesis in bacteria depends upon the contractile Z ring, which is composed of dynamic polymers of the tubulin homolog FtsZ as well as other membrane-associated proteins such as FtsA, a homolog of actin that is required for membrane attachment of the Z ring and its subsequent constriction. Here we show that a previously characterized hypermorphic mutant FtsA (FtsA*) partially disassembled FtsZ polymers in vitro. This effect was strictly dependent on ATP or ADP binding to FtsA* and occurred at substoichiometric levels relative to FtsZ, similar to cellular levels. Nucleotide-bound FtsA* did not affect FtsZ GTPase activity or the critical concentration for FtsZ assembly but was able to disassemble preformed FtsZ polymers, suggesting that FtsA* acts on FtsZ polymers. Microscopic examination of the inhibited FtsZ polymers revealed a transition from long, straight polymers and polymer bundles to mainly short, curved protofilaments. These results indicate that a bacterial actin, when activated by adenine nucleotides, can modify the length distribution of bacterial tubulin polymers, analogous to the effects of actin-depolymerizing factor/cofilin on F-actin.Bacterial cell division requires a large number of proteins that colocalize to form a putative protein machine at the cell membrane (1). This machine, sometimes called the divisome, recruits enzymes to synthesize the septum cell wall and to initiate and coordinate the invagination of the cytoplasmic membrane (and in Gram-negative bacteria, the outer membrane). The most widely conserved and key protein for this process is FtsZ, a homolog of tubulin that forms a ring structure called the Z ring, which marks the site of septum formation (2, 3). Like tubulin, FtsZ assembles into filaments with GTP but does not form microtubules (4). The precise assembly state and conformation of these FtsZ filaments at the division ring is not clear, although recent electron tomography work suggests that the FtsZ ring consists of multiple short filaments tethered to the membrane at discrete junctures (5), which may represent points along the filaments bridged by membrane anchor proteins.In Escherichia coli, two of these anchor proteins are known. One of these, ZipA, is not well conserved but is an essential protein in E. coli. ZipA binds to the C-terminal tail of FtsZ (6–8), and purified ZipA promotes bundling of FtsZ filaments in vitro (9, 10). The other, FtsA, is also essential in E. coli and is more widely conserved among bacterial species. FtsA is a member of the HSP70/actin superfamily (11, 12), and like ZipA, it interacts with the C-terminal tail of FtsZ (7, 13–15). FtsA can self-associate (16, 17) and bind ATP (12, 18), but reports of ATPase activity vary, with Bacillus subtilis FtsA having high activity (19) and Streptococcus pneumoniae FtsA exhibiting no detectable activity (20). There are no reports of any other in vitro activities of FtsA, including effects on FtsZ assembly.Understanding how FtsA affects FtsZ assembly is important because FtsA has a number of key activities in the cell. It is required for recruitment of a number of divisome proteins (21, 22) and helps to tether the Z ring to the membrane via a C-terminal membrane-targeting sequence (23). FtsA, like ZipA and other divisome proteins, is necessary to activate the contraction of the Z ring (24, 25). In E. coli, the FtsA:FtsZ ratio is crucial for proper cell division, with either too high or too low a ratio inhibiting septum formation (26, 27). This ratio is roughly 1:5, with ∼700 molecules of FtsA and 3200 molecules of FtsZ per cell (28), which works out to concentrations of 1–2 and 5–10 μm, respectively.Another interesting property of FtsA is that single residue alterations in the protein can result in significant enhancement of divisome activity. For example, the R286W mutation of FtsA, also called FtsA*, can substitute for the native FtsA and divide the cell. However, this mutant FtsA causes E. coli cells to divide at less than 80% of their normal length (29) and allows efficient division of E. coli cells in the absence of ZipA (30), indicating that it has gain-of-function activity. FtsA* and other hypermorphic mutations such as E124A and I143L can also increase division activity in cells lacking other essential divisome components (31–33). The R286W and E124A mutants of FtsA also bypass the FtsA:FtsZ ratio rule, allowing cell division to occur at higher ratios than with WT² FtsA. This may be because the altered FtsA proteins self-associate more readily than WT FtsA, which may cause different changes in FtsZ assembly state as compared with WT FtsA (17, 34).In this study, we use an in vitro system with purified FtsZ and a purified tagged version of FtsA* to elucidate the role of FtsA in activating constriction of the Z ring in vivo. We show that FtsA*, at physiological concentrations in the presence of ATP or ADP, has significant effects on the assembly of FtsZ filaments.     

Asymmetric Constriction of Dividing Escherichia coli Cells Induced by Expression of a Fusion between Two Min Proteins

The Min system, consisting of MinC, MinD, and MinE, plays an important role in localizing the Escherichia coli cell division machinery to midcell by preventing FtsZ ring (Z ring) formation at cell poles. MinC has two domains, MinCn and MinCc, which both bind to FtsZ and act synergistically to inhibit FtsZ polymerization. Binary fission of E. coli usually proceeds symmetrically, with daughter cells at roughly 180° to each other. In contrast, we discovered that overproduction of an artificial MinCc-MinD fusion protein in the absence of other Min proteins induced frequent and dramatic jackknife-like bending of cells at division septa, with cell constriction predominantly on the outside of the bend. Mutations in the fusion known to disrupt MinCc-FtsZ, MinCc-MinD, or MinD-membrane interactions largely suppressed bending division. Imaging of FtsZ-green fluorescent protein (GFP) showed no obvious asymmetric localization of FtsZ during MinCc-MinD overproduction, suggesting that a downstream activity of the Z ring was inhibited asymmetrically. Consistent with this, MinCc-MinD fusions localized predominantly to segments of the Z ring at the inside of developing cell bends, while FtsA (but not ZipA) tended to localize to the outside. As FtsA is required for ring constriction, we propose that this asymmetric localization pattern blocks constriction of the inside of the septal ring while permitting continued constriction of the outside portion.     

Dr-FtsA,an Actin Homologue in Deinococcus radiodurans Differentially Affects Dr-FtsZ and Ec-FtsZ Functions In Vitro

The Deinococcus radiodurans genome encodes homologues of divisome proteins including FtsZ and FtsA. FtsZ of this bacterium (Dr-FtsZ) has been recently characterized. In this paper, we study FtsA of D. radiodurans (Dr-FtsA) and its involvement in regulation of FtsZ function. Recombinant Dr-FtsA showed neither ATPase nor GTPase activity and its polymerization was ATP dependent. Interestingly, we observed that Dr-FtsA, when compared with E. coli FtsA (Ec-FtsA), has lower affinity for both Dr-FtsZ and Ec-FtsZ. Also, Dr-FtsA showed differential effects on GTPase activity and sedimentation characteristics of Dr-FtsZ and Ec-FtsZ. For instance, Dr-FtsA stimulated GTPase activity of Dr-FtsZ while GTPase activity of Ec-FtsZ was reduced in the presence of Dr-FtsA. Stimulation of GTPase activity of Dr-FtsZ by Dr-FtsA resulted in depolymerization of Dr-FtsZ. Dr-FtsA effects on GTPase activity and polymerization/depolymerisation characteristics of Dr-FtsZ did not change significantly in the presence of ATP. Recombinant E. coli expressing Dr-FtsA showed cell division inhibition in spite of in trans expression of Dr-FtsZ in these cells. These results suggested that Dr-FtsA, although it lacks ATPase activity, is still functional and differentially affects Dr-FtsZ and Ec-FtsZ function in vitro.     

Location of Dual Sites in E. coli FtsZ Important for Degradation by ClpXP; One at the C-Terminus and One in the Disordered Linker

ClpXP is a two-component ATP-dependent protease that unfolds and degrades proteins bearing specific recognition signals. One substrate degraded by Escherichia coli ClpXP is FtsZ, an essential cell division protein. FtsZ forms polymers that assemble into a large ring-like structure, termed the Z-ring, during cell division at the site of constriction. The FtsZ monomer is composed of an N-terminal polymerization domain, an unstructured linker region and a C-terminal conserved region. To better understand substrate selection by ClpXP, we engineered FtsZ mutant proteins containing amino acid substitutions or deletions near the FtsZ C-terminus. We identified two discrete regions of FtsZ important for degradation of both FtsZ monomers and polymers by ClpXP in vitro. One region is located 30 residues away from the C-terminus in the unstructured linker region that connects the polymerization domain to the C-terminal region. The other region is near the FtsZ C-terminus and partially overlaps the recognition sites for several other FtsZ-interacting proteins, including MinC, ZipA and FtsA. Mutation of either region caused the protein to be more stable and mutation of both caused an additive effect, suggesting that both regions are important. We also observed that in vitro MinC inhibits degradation of FtsZ by ClpXP, suggesting that some of the same residues in the C-terminal site that are important for degradation by ClpXP are important for binding MinC.     

A bacterial actin unites to divide bacterial cells

EMBO J 31 10, 2249–2260 (2012); published online March302012Once thought to exist only in eukaryotic cells, the highly conserved bacterial cytoskeleton is now known to function analogously to its eukaryotic counterparts, particularly in cell shape and division. For instance, the actin-like MreB protein and its homologs are important to maintain cell shape in many rod-shaped bacteria, probably by organizing how peptidoglycan is synthesized. FtsZ, a tubulin homolog, forms a scaffold for the cytokinetic ring, or divisome, by GTP-dependent polymerization into protofilaments. In this issue of The EMBO Journal, Szwedziak et al (2012) reveal the first crystal structures of cell division protein FtsA polymerizing into actin-like filaments, along with in vivo evidence that this self-interaction is crucial for proper cell division.FtsA is an actin homolog required for cytokinesis in many bacterial species and has several key roles in cell division, including helping to tether FtsZ to the cytoplasmic membrane via a membrane-targeting sequence (MTS), recruiting other essential proteins to the divisome, and perhaps promoting divisome constriction (de Boer, 2010). Szwedziak et al (2012) recapitulate the FtsZ-FtsA-membrane association in vitro using liposomes with FtsZ and FtsA proteins from Thermotoga maritima. To get a closer look at the FtsA-FtsZ interface, the authors co-crystallize FtsA with the carboxy-terminal tail of FtsZ, which is known to interact with FtsA. Intriguingly, the crystal reveals an FtsA homodimer. Contrary to the previous bioinformatics model of FtsA self-interaction that proposed a 180° rotation between the two subunits (Carettoni et al, 2003), the FtsA-FtsA interface in the crystal structure shows no rotation, similar to F-actin. Szwedziak et al (2012) also show that FtsA can form longer, actin-like polymers in the presence of non-hydrolysable ATP or on lipid monolayers. These results are surprising because FtsA has a divergent subdomain architecture compared to other actin-family proteins (van den Ent and Löwe).A critical question now is whether FtsA needs to form polymers in vivo to function properly. Purified Streptococcus pneumoniae FtsA assembles into large polymers that are not like F-actin, and it remains unclear if these structures are relevant in vivo (Krupka et al, 2012). Wild-type FtsA proteins do not form detectable filaments in cells, but C-terminal truncations of FtsA that remove the MTS form polymers quite readily in cells when overproduced, although they are not functional (Pichoff and Lutkenhaus, 2007). Even so, starting with an MTS truncation derivative of FtsA to visualize in vivo polymers, Szwedziak et al (2012) design site-directed mutants of Bacillus subtilis FtsA based on the FtsA-FtsA interface of their crystals; these fail to assemble into polymers in vivo. Using a similar MTS truncation derivative, Pichoff et al (2012) created random mutations in Escherichia coli FtsA, and found that those mapping to the same interface found by Szwedziak et al (2012) also disrupted polymer formation. Together, these data suggest that these residues are needed for FtsA self-interaction. Perplexingly, when these mutants were subsequently tested for functionality in the context of full-length FtsA, the results were mixed. Pichoff et al (2012) showed that FtsA mutants deficient for self-interaction in E. coli have a gain-of-function phenotype, whereas Szwedziak et al (2012) report that analogous mutants in B. subtilis FtsA suffer a loss of function. These results support the idea that FtsA self-association is related to its activity (Shiomi and Margolin, 2007), yet understanding how self-interaction regulates FtsA function clearly requires further study.The ability of eukaryotic cytoskeletal proteins to form long polymers is essential to their function, but the physiological relevance of long polymer formation by bacterial cytoskeletal proteins is now a topic of debate (Figure 1). For example, it has been hypothesized that FtsZ protofilaments wrap around the entire circumference of the cell to form the cytokinetic ring. However, recent studies using photoactivated localization microscopy (PALM) and electron cryotomography reveal a different model in which FtsZ forms a series of very short polymers that overlap to encompass the diameter of the cell (Li et al, 2007; Fu et al, 2010). MreB was also originally thought to form long-range helical polymers extending the length of the cell, but recent data obtained with more sophisticated microscopic techniques suggest that MreB is distributed in patches that move circumferentially and independently (White and Gober, 2012). It is not yet clear which of these models represents the true cellular architecture of MreB, although it is likely that some degree of MreB polymerization is still needed for function. It is notable that other bacterial homologs of actin and tubulin used for generating scaffolds or partitioning plasmid DNA, but not for essential cellular processes such as cell division and growth, tend to form long polymers that extend throughout the cell (Pogliano, 2008). The continued combined use of microscopic, biochemical, and genetic methods, as demonstrated by Szwedziak et al (2012) will enhance future understanding of ancestral tubulin and actin proteins in prokaryotes.Open in a separate windowFigure 1Bacterial actin and tubulin filaments involved in cell growth and division. (A) MreB (purple) has long been thought of as a spiral filament twisting along the cell length to control cell shape. Likewise, FtsZ protofilaments (blue) were once thought to wrap around the cell midpoint to organize the divisome. (B) Recent work using high-resolution microscopy has revealed that long cytoskeletal filaments are more likely to be short patches of polymers. The present work by Szwedziak et al (2012) has added FtsA actin-like filaments (green) to the model of possible divisome architecture.     

Modeling FtsZ ring formation in the bacterial cell-anisotropic aggregation via mutual interactions of polymer rods

The cytoskeletal protein FtsZ polymerizes to a ring structure (Z ring) at the inner cytoplasmic membrane that marks the future division site and scaffolds the division machinery in many bacterial species. FtsZ is known to polymerize in the presence of GTP into single-stranded protofilaments. In vivo, FtsZ polymers become associated with the cytoplasmic membrane via interaction with the membrane-binding proteins FtsA and ZipA. The FtsZ ring structure is highly dynamic and undergoes constantly polymerization and depolymerization processes and exchange with the cytoplasmic pool. In this theoretical study, we consider a scenario of Z ring self-organization via self-enhanced attachment of FtsZ polymers due to end-to-end interactions and lateral interactions of FtsZ polymers on the membrane. With the assumption of exclusively circumferential polymer orientations, we derive coarse-grained equations for the dynamics of the pool of cytoplasmic and membrane-bound FtsZ. To capture stochastic effects expected in the system due to low particle numbers, we simulate our computational model using a Gillespie-type algorithm. We obtain ring- and arc-shaped aggregations of FtsZ polymers on the membrane as a function of monomer numbers in the cell. In particular, our model predicts the number of FtsZ rings forming in the cell as a function of cell geometry and FtsZ concentration. We also calculate the time of FtsZ ring localization to the midplane in the presence of Min oscillations. Finally, we demonstrate that the assumptions and results of our model are confirmed by 3D reconstructions of fluorescently-labeled FtsZ structures in E. coli that we obtained.     

Identification of a region of FtsA required for interaction with FtsZ

The assembly of the Z ring is the earliest step in bacterial cell division. In Escherichia coli this assembly requires either FtsA or ZipA which bind to a conserved, C-terminal 17 amino acid motif in FtsZ and to the membrane. The FtsZ-ZipA interaction is well characterized; however, nothing is known about the region of FtsA involved in the interaction with FtsZ even though the FtsA-FtsZ interaction is nearly ubiquitous in Eubacteria. FtsA is proposed to bind to the membrane through its conserved C-terminal amphiphatic helix before efficiently interacting with FtsZ. Based upon this model we designed a genetic screen to identify mutants specifically impaired for the FtsA-FtsZ interaction. The mutants obtained retain the ability to be targeted to the membrane but fail to be recruited to the Z ring or interact with FtsZ in the yeast two-hybrid system. These mutants do not complement an ftsA-depletion strain. Through this approach we have identified a region of FtsA containing some invariant residues which is required for binding to FtsZ. The results support our model that FtsA is targeted to the membrane before it interacts with FtsZ and demonstrates that this interaction plays an essential role in E. coli cell division.     

FtsA reshapes membrane architecture and remodels the Z‐ring in Escherichia coli

Cell division in prokaryotes initiates with assembly of the Z‐ring at midcell, which, in Escherichia coli, is tethered to the inner leaflet of the cytoplasmic membrane through a direct interaction with FtsA, a widely conserved actin homolog. The Z‐ring is comprised of polymers of tubulin‐like FtsZ and has been suggested to provide the force for constriction. Here, we demonstrate that FtsA exerts force on membranes causing redistribution of membrane architecture, robustly hydrolyzes ATP and directly engages FtsZ polymers in a reconstituted system. Phospholipid reorganization by FtsA occurs rapidly and is mediated by insertion of a C‐terminal membrane targeting sequence (MTS) into the bilayer and further promoted by a nucleotide‐dependent conformational change relayed to the MTS. FtsA also recruits FtsZ to phospholipid vesicles via a direct interaction with the FtsZ C‐terminus and regulates FtsZ assembly kinetics. These results implicate the actin homolog FtsA in establishment of a Z‐ring scaffold, while directly remodeling the membrane and provide mechanistic insight into localized cell wall remodeling, invagination and constriction at the onset of division.