Cross-resistance and mechanism of resistance to Cry1Ab toxin from Bacillus thuringiensis in a field-derived strain of European corn borer, Ostrinia nubilalis

The cross-resistance spectrum and biochemical mechanism of resistance to the Bacillus thuringiensis Cry1Ab toxin was studied in a field-derived strain of Ostrinia nubilalis (Hübner) (Lepidoptera: Crambidae) that was further selected in the laboratory for high levels (>1000-fold) of resistance to Cry1Ab. The resistant strain exhibited high levels of cross-resistance to Cry1Ac and Cry1Aa but only low levels of cross-resistance (<4-fold) to Cry1F. In addition, there was no significant difference between the levels of resistance to full-length and trypsin-activated Cry1Ab protein. No differences in activity of luminal gut proteases or altered proteolytic processing of the toxin were observed in the resistant strain. Significantly reduced binding of radiolabeled Cry1Aa was observed in the resistant strain whereas binding of Cry1Ab and Cry1Ac was practically the same in both resistant and susceptible strains. The interpretation of the overall data seems to suggest the involvement of an alteration in the binding of Cry1A toxins to a common receptor, which is more clearly revealed by the binding assays using radiolabeled Cry1Aa.     

Binding of Bacillus thuringiensis Cry1A toxins to brush border membrane vesicles of midgut from Cry1Ac susceptible and resistant Plutella xylostella

Plutella xylostella strain resistant (PXR) to Bacillus thuringiensis Cry1Ac toxin was not killed at even more than 1000 μg Cry1Ac/g diet but killed by Cry1Ab at 0.5 μg/g diet. In contrast, susceptible strain (PXS) was killed by Cry1Ac at 1 μg/g diet. Cy3-labeld Cry1A(s) binding to brush border membrane vesicles (BBMV) prepared from both strains were analyzed with direct binding assay. The Kd value of Cry1Aa to both BBMV was almost identical: 213.2 and 205.8 nM, and 263.5 and 265.0 nM for Cry1Ac. The highest Kd values were in Cry1Ab which showed most effective insecticidal activity in PXS and PXR, 2126 and 2463 nM, respectively. These results clearly showed that the BBMV from PXR and PXS could equally bind to Cry1Ac. The binding between BBMV and Cy3-labeled Cry1Ac was inhibited only by anti-175 kDa cadherin-like protein (CadLP) and -252 kDa protein antisera, but not by anti-120 kDa aminopeptidase. This supports that resistance in PXR resulted from the abortion of pore formation after the binding of Cry1Ac to the BBMV. And furthermore, the importance of 175K CadLP and P252 proteins in those bindings was suggested. We briefly discuss possible mechanisms of the resistance.     

Structural and functional analysis of the pre-pore and membrane-inserted pore of Cry1Ab toxin

Bacillus thuringiensis produces insecticidal Cry proteins that are active against different insect species. The primary action of Cry toxins is to lyse midgut epithelial cells in the target insect by forming lytic pores on the apical membrane. After interaction with cadherin receptor, Cry proteins undergo conformational changes from a monomeric structure to a pre-pore-oligomeric form that is able to interact with a second GPI-anchored aminopeptidase-N receptor and then insert into lipid membranes. Here, we review the recent advances in the understanding of the structural changes presented by Cry1Ab toxin upon membrane insertion. Based on analysis of the Trp fluorescence of pure monomeric and oligomeric Cry1Ab structures in solution and in membrane-bound state we reported that oligomerization caused 27% reduction of Trp exposed to the solvent. After membrane insertion there is another conformational change that allows an additional rearrangement of the Trp residues resulting in a total protection of these residues from exposure to the solvent. The oligomeric structure is membrane insertion competent since more than 96% of the Cry1Ab oligomer inserts into the membrane as a function of lipid:protein ratio, in contrast to the monomer of which only 5-10%, inserts into the membrane. Finally, analysis of the stability of monomeric, pre-pore and pore structures of Cry1Ab toxin after urea and thermal denaturation suggested that a more flexible conformation could be necessary for membrane insertion and this flexible structure is obtained by toxin oligomerization and by alkaline pH. Domain I is involved in the intermolecular interaction within the oligomeric Cry1Ab and this domain is inserted into the membrane in the membrane-inserted state.     

The crystal structure of a hyperthermoactive exopolygalacturonase from Thermotoga maritima reveals a unique tetramer

The exopolygalacturonase from Thermotoga maritima is the most thermoactive and thermostable pectinase known to date. Here we present its crystal structure at 2.05 Å resolution. High structural homology around the active site allowed us to propose a model for substrate binding, explaining the exo-cleavage activity and specificity for non-methylated saturated galacturonate at the non-reducing end. Furthermore, the structure reveals unique features that contribute to the formation of stable tetramers in solution. Such an oligomerization has not been observed before for polygalacturonases.     

Amino acid and divalent ion permeability of the pores formed by the Bacillus thuringiensis toxins Cry1Aa and Cry1Ac in insect midgut brush border membrane vesicles

The pores formed by Bacillus thuringiensis insecticidal toxins have been shown to allow the diffusion of a variety of monovalent cations and anions and neutral solutes. To further characterize their ion selectivity, membrane permeability induced by Cry1Aa and Cry1Ac to amino acids (Asp, Glu, Ser, Leu, His, Lys and Arg) and to divalent cations (Mg²⁺, Ca²⁺ and Ba²⁺) and anions (SO₄²⁻ and phosphate) was analyzed at pH 7.5 and 10.5 with midgut brush border membrane vesicles isolated from Manduca sexta and an osmotic swelling assay. Shifting pH from 7.5 to 10.5 increases the proportion of the more negatively charged species of amino acids and phosphate ions. All amino acids diffused well across the toxin-induced pores, but, except for aspartate and glutamate, amino acid permeability was lower at the higher pH. In the presence of either toxin, membrane permeability was higher for the chloride salts of divalent cations than for the potassium salts of divalent anions. These results clearly indicate that the pores are cation-selective.     

Tobacco plants expressing the Cry1AbMod toxin suppress tolerance to Cry1Ab toxin of Manduca sexta cadherin-silenced larvae

Cry toxins produced by Bacillus thuringiensis bacteria are insecticidal proteins used worldwide in the control of different insect pests. Alterations in toxin-receptor interaction represent the most common mechanism to induce resistance to Cry toxins in lepidopteran insects. Cry toxins bind with high affinity to the cadherin protein present in the midgut cells and this interaction facilitates the proteolytic removal of helix ??-1 and pre-pore oligomer formation. Resistance to Cry toxins has been linked with mutations in the cadherin gene. One strategy effective to overcome larval resistance to Cry1A toxins is the production of Cry1AMod toxins that lack helix ??-1. Cry1AMod are able to form oligomeric structures without binding to cadherin receptor and were shown to be toxic to cadherin-silenced Manduca sexta larvae and Pectinophora gossypiella strain with resistance linked to mutations in a cadherin gene.We developed Cry1AbMod tobacco transgenic plants to analyze if Cry1AMod toxins can be expressed in transgenic crops, do not affect plant development and are able to control insect pests. Our results show that production of the Cry1AbMod toxin in transgenic plants does not affect plant development, since these plants exhibited healthy growth, produced abundant seeds, and were virtually undistinguishable from control plants. Most importantly, Cry1AbMod protein produced in tobacco plants retains its functional toxic activity against susceptible and tolerant M. sexta larvae due to the silencing of cadherin receptor by RNAi. These results suggest that CryMod toxins could potentially be expressed in other transgenic crops to protect them against both toxin-susceptible and resistant lepidopteran larvae affected in cadherin gene.     

Differential proteomic analysis of Trichoplusia ni cells after continuous selection with activated Cry1Ac toxin

Development of insect resistance to Bacillus thuringiensis (Bt) toxins threatens the sustained successful application of Bt-based biological control tactics. Multi-mechanisms of resistance have been proposed, such as alteration of toxin-binding proteins, changes of proteases in midgut and so on. The other responses of the Cry1Ac-selected insects might also contribute to the evolution of resistance. Here, the Cry1Ac-selected Trichoplusia ni TnH5 cells with high resistance were subjected to analysis of proteome and the differentially expressed proteins were identified using mass spectrometry. The differential proteins included transporter, molecular chaperon, structural molecules and many other molecules involved in protein metabolism, signal transduction, nucleotide binding, lipid biosynthesis, carbohydrates metabolism and energy production, suggesting that a complex mechanisms involved in the development of insect resistance to Bt Cry1Ac toxins at cellular levels. The decrease of protein synthesis, changes of signal transduction, more rapid energy production, the enhanced lipid synthesis and the decline of possible Cry1Ac-binding proteins in cytoplasm and other events might contribute to the development of resistance in the selected cells. Our results provide some new cues for understanding the mechanism of Bt resistance.     

GalNAc pretreatment inhibits trapping of Bacillus thuringiensis Cry1Ac on the peritrophic membrane of Bombyx mori

Bombyx mori (ShunreixShogetsu) is sensitive to Cry1Aa and resistant to Cry1Ac, both insecticidal proteins of Bacillus thuringiensis. Cry1Aa passed through the peritrophic membrane (PM) much faster (0.37 microg/mm2 PM/h) than Cry1Ac (0.05 microg/mm2 PM/h) during the initial observation period. Both Cry1Aa and Cry1Ac bound to the PM but only the binding of Cry1Ac was specifically inhibited by N-acetylgalactosamine (GalNAc). When Cry1Ac was pretreated with GalNAc, Cry1Ac permeated the PM much faster. These results suggested that Cry1Ac bound a PM protein via GalNAc on a sugar side chain. The role of the PM on Cry1Ac resistance of B. mori was briefly discussed.     

Activation process of the mosquitocidal delta-endotoxin Cry39A produced by Bacillus thuringiensis subsp. aizawai BUN1-14 and binding property to Anopheles stephensi BBMV

Most delta-endotoxins produced by Bacillus thuringiensis require proteolytic processing in order to become active. The in vitro and in vivo activation processes of Cry39A, a delta-endotoxin that is highly toxic to Anopheles stephensi, were investigated. Cry39A with a molecular mass of 72 kDa was processed in vitro into a 60 kDa fragment by trypsin and gut extract from A. stephensi larvae. N-terminal amino acid sequencing of the 60 kDa fragment revealed that trypsin and the protease(s) in the gut extract cleaved Cry39A between Arg(61) and Gly(62). In contrast, 40 and 25 kDa polypeptides were generated in vivo by intramolecular cleavage of the 60 kDa fragment in A. stephensi larvae. Further, a co-precipitation assay was used to investigate the binding property of the activated Cry39A to A. stephensi BBMV. Cry39A bound to A. stephensi BBMV specifically and did not compete with the Cry4Aa toxin. This indicated that the binding molecule(s) for Cry39A might differ from those for Cry4A. In addition, Cry39A preferentially bound to the Triton X-100-insoluble membrane fraction.     

Comparative binding of Cry1Ab and Cry1F Bacillus thuringiensis toxins to brush border membrane proteins from Ostrinia nubilalis, Ostrinia furnacalis and Diatraea saccharalis (Lepidoptera: Crambidae) midgut tissue

The European (Ostrinia nubilalis Hübner) and Asian corn borers (Ostrinia furnacalis Guenée) are closely related and display similar sensitivity to Cry1 toxins. In this study, we compared the binding patterns of Cry1Ab and Cry1F toxins between both Ostrinia spp., as well as the expression of putative cadherin- and aminopeptidase-N (APN)-like protein receptors. Additionally, cDNA sequences of these putative toxin receptors from both Ostrinia species were compared. Ligand blots for both species indicated a similar binding pattern for Cry1Ab with the strongest immunoreactive band at 260 kDa in both species. In addition, similar expression of the putative cadherin- and APN-like protein receptors were observed at 260 and 135 kDa, respectively. A high degree of similarity (98% amino acid sequence identity) of cDNA sequences for both putative receptor sequences was observed. The Cry1F ligand blot revealed that O. furnacalis and O. nubilalis BBMV exhibited slightly different binding patterns, with strong binding to putative proteins at 150 and 140 kDa, respectively. Both proteins appeared to also bind Cry1Ab, although the signal intensity was much reduced with Cry1Ab. O. furnacalis showed an additional but weaker band at 210 kDa relative to the 150 kDa band. Diatraea saccharalis (Fabricius), which was used as an outgroup species, exhibited different binding patterns than either Ostrinia species, with both Cry1Ab and Cry1F toxins binding to a 210 kDa protein. These results support the previous experiments indicating that O. nubilalis and O. furnacalis share similar patterns of susceptibility to Cry toxins.     

Polymorphic assemblies and crystalline arrays of lens tetraspanin MP20

Members of the tetraspanin superfamily function as transmembrane scaffold proteins that mediate the assembly of membrane proteins into specific signaling complexes. Tetraspanins also interact with each other and concentrate membrane proteins into tetraspanin-enriched microdomains (TEMs). Here we report that lens-specific tetraspanin MP20 can form multiple types of higher-order assemblies and we present crystalline arrays of MP20. When isolated in the absence of divalent cations, MP20 is solubilized predominantly in tetrameric form, whereas the presence of divalent cations during solubilization promotes the association of MP20 tetramers into higher-order species. This effect only occurs when divalent cations are present during solubilization but not when divalent cations are added to solubilized tetrameric MP20, suggesting that other factors may also be involved. When purified MP20 tetramers are reconstituted with native lens lipids in the presence of magnesium, MP20 forms two-dimensional (2D) crystals. A projection map at 18 Å resolution calculated from negatively stained 2D crystals showed that the building block of the crystal is an octamer consisting of two tetramers related to each other by 2-fold symmetry. In addition to 2D crystals, reconstitution of MP20 with native lipids also produced a variety of large protein-lipid complexes, and we present three-dimensional (3D) reconstructions of the four most abundant of these complexes in negative stain. The various complexes formed by MP20 most likely reflect the many ways in which tetraspanins can interact with each other to allow formation of TEMs.     

Tetrameric structure of thermostable direct hemolysin from vibrio parahaemolyticus revealed by ultracentrifugation, small-angle X-ray scattering and electron microscopy

The thermostable direct hemolysin (TDH) is a major virulence factor of Vibrio parahaemolyticus. We have characterized the conformational properties of TDH by small-angle X-ray scattering (SAXS), ultracentrifugation and transmission electron microscopy. Sedimentation equilibrium and velocity studies revealed that the protein is tetrameric in aqueous solvents. The Guinier plot derived from SAXS data provided a radius of gyration of 29.0 Å. The elongated pattern with a shoulder of a pair distance distribution function derived from SAXS data suggested the presence of molecules with an anisotropic shape having a maximum diameter of 98 Å. Electron microscopic image analysis of the negatively stained TDH oligomer showed the presence of C₄ symmetric particles with edge and diagonal lengths of 65 Å and 80 Å, respectively. Shape reconstruction was carried out by ab initio calculations using the SAXS data with a C₄ symmetric approximation. These results suggested that the tetrameric TDH assumes an oblate structure. The hydrodynamic parameters predicted from the ab initio model differed slightly from the experimental values, suggesting the presence of flexible segments.     

Oligomerization triggers binding of a Bacillus thuringiensis Cry1Ab pore-forming toxin to aminopeptidase N receptor leading to insertion into membrane microdomains

Bacillus thuringiensis Cry1A toxins, in contrast to other pore-forming toxins, bind two putative receptor molecules, aminopeptidase N (APN) and cadherin-like proteins. Here we show that Cry1Ab toxin binding to these two receptors depends on the toxins' oligomeric structure. Toxin monomeric structure binds to Bt-R₁, a cadherin-like protein, that induces proteolytic processing and oligomerization of the toxin (Gómez, I., Sánchez, J., Miranda, R., Bravo A., Soberón, M., FEBS Lett. (2002) 513, 242-246), while the oligomeric structure binds APN, which drives the toxin into the detergent-resistant membrane (DRM) microdomains causing pore formation. Cleavage of APN by phospholipase C prevented the location of Cry1Ab oligomer and Bt-R₁ in the DRM microdomains and also attenuates toxin insertion into membranes despite the presence of Bt-R₁. Immunoprecipitation experiments demonstrated that initial Cry1Ab toxin binding to Bt-R₁ is followed by binding to APN. Also, immunoprecipitation of Cry1Ab toxin-binding proteins using pure oligomeric or monomeric structures showed that APN was more efficiently detected in samples immunoprecipitated with the oligomeric structure, while Bt-R₁ was preferentially detected in samples immunoprecipitated with the monomeric Cry1Ab. These data agrees with the 200-fold higher apparent affinity of the oligomer than that of the monomer to an APN enriched protein extract. Our data suggest that the two receptors interact sequentially with different structural species of the toxin leading to its efficient membrane insertion.     

Patch-clamp study of the apical membrane of the midgut of Manduca sexta larvae: direct demonstration of endogenous channels and effect of a Bacillus thuringiensis toxin

The patch-clamp technique was applied to the apical membrane of epithelial midgut cells of a lepidoptera, Manduca sexta L. Access to the apical membrane, the main target site of Bacillus thuringiensis (Bt) toxins, was achieved by using freshly isolated larval midgut preparations mounted onto holding glass pipettes. The epithelial cells retained their functional integrity, as evidenced by the magnitude of intracellular potentials recorded with microelectrodes. With standard 32 mM K(+) solution in the bath and the patch-clamp pipette, endogenous channel activity was detected in about 50% of experiments, mainly in moulting larvae and larvae that had been kept at reduced temperature for at least two days prior to the experiments. In both cell-attached and inside-out patch-clamp configurations, different types of channel were observed, with conductances varying between about 5 and 50 pS and different conducting properties. Addition of trypsin-activated Cry1Ac Bt toxin in the patch-clamp pipette triggered, after a delay, large conductances of a few nanosiemens. This is the first study allowing exploration, in the intact midgut, of the properties of apical membrane channels and the direct interaction between the apical membrane of epithelial cells and pathogenic agents such as Bt toxins.     

Chemical modification of Bacillus thuringiensis Cry1Aa toxin single-cysteine mutants reveals the importance of domain I structural elements in the mechanism of pore formation

Bacillus thuringiensis Cry toxins form pores in the apical membrane of insect larval midgut cells. To investigate their mechanism of membrane insertion, mutants in which cysteine replaced individual amino acids located within the pore-forming domain of Cry1Aa were chemically modified with sulfhydryl-specific reagents. The thiol group of cysteine was highly susceptible to oxidation and its reactivity was significantly increased when the toxins were purified under reducing conditions. Addition of a biotin group to the cysteine had little effect on the ability of the toxins to permeabilize Manduca sexta brush border membrane vesicles except for a slight reduction in activity for S252C and a large increase in activity for Y153C. The activity of Y153C was also significantly increased after modification by reagents that added an aromatic or a charged group to the cysteine. When permeability assays were performed in the presence of streptavidin, a large biotin-binding protein, the pore-forming activity of several mutants, including Y153C, where the altered residue is located within the hairpin comprising helices α4 and α5, or in adjacent loops, was significantly reduced. These results support the umbrella model of toxin insertion.     

Kinetics of pore formation by the Bacillus thuringiensis toxin Cry1Ac

After binding to specific receptors, Cry toxins form pores in the midgut apical membrane of susceptible insects. The receptors could form part of the pore structure or simply catalyze pore formation and consequently be recycled. To discriminate between these possibilities, the kinetics of pore formation in brush border membrane vesicles isolated from Manduca sexta was studied with an osmotic swelling assay. Pore formation, as deduced from changes in membrane permeability induced by Cry1Ac during a 60-min incubation period, was strongly dose-dependent, but rapidly reached a maximum as toxin concentration was increased. Following exposure of the vesicles to the toxin, the osmotic swelling rate reached a maximum shortly after a delay period. Under these conditions, at relatively high toxin concentrations, the maximal osmotic swelling rate increased linearly with toxin concentration. When vesicles were incubated for a short time with the toxin and then rapidly cooled to prevent the formation of new pores before and during the osmotic swelling experiment, a plateau in the rate of pore formation was observed as toxin concentration was increased. Taken together, these results suggest that the receptors do not act as simple catalysts of pore formation, but remain associated with the pores once they are formed.     

Crystal structure of the arginine repressor protein in complex with the DNA operator from Mycobacterium tuberculosis

The arginine repressor (ArgR) from Mycobacterium tuberculosis (Mtb) is a gene product encoded by the open reading frame Rv1657. It regulates the l-arginine concentration in cells by interacting with ARG boxes in the promoter regions of the arginine biosynthesis and catabolism operons. Here we present a 2.5-Å structure of MtbArgR in complex with a 16-bp DNA operator in the absence of arginine. A biological trimer of the protein-DNA complex is formed via the crystallographic 3-fold symmetry axis. The N-terminal domain of MtbArgR has a winged helix-turn-helix motif that binds to the major groove of the DNA. This structure shows that, in the absence of arginine, the ArgR trimer can bind three ARG box half-sites. It also reveals the structure of the whole MtbArgR molecule itself containing both N-terminal and C-terminal domains.     

Fine structure of body wall cuticle of females of Meloidodera charis,Atalodera lonicerae,and Sarisodera hydrophila (Heteroderidae)

The body wall cuticle of adult females of Meloidodera charis, Atolodera lonicerae, and Sarisodera hydrophila is examined by transmission electron and light microscopy for comparison with Heterodera schachtii and previous observations of additional species of Heterodera, Globodera, and Punctodera. The cuticle of M. charis is least complex, consisting of layers A, B, C (with A outermost), and varies in overall thickness from 3 to 8 μm. As in other species, the cuticle is thickest in mature specimens. The cuticle of A. lonicerae is 6-9 μm thick; unlike M. charis it has an innermost layer, D, in addition to A, B, and C. The cuticle of S. hydrophila varies from 14 to 30 μm thick and includes a D layer similar to A. lonicerae; layer C is subdivided into additional zones relative to other heteroderids, and the external portion of the cuticle is infused with an electron-dense material. The presence of a D layer in A. lonicerae and S. hydrophila is a character state which is shared with Globodera spp. and Punctodera sp. The electron-dense material in the outer layers of S. hydrophila also occurs in Globodera spp. and Punctodera sp. On the other hand, H. schachtii resembles other Heterodera spp. as well as M. charis by the absence of a D layer and lack of electron-dense material in the outer layers. The pattern of occurrence of shared character states, including those of the cuticle, may be useful for phylogenetic analysis of Heteroderidae.     

Functional characterizations of residues Arg-158 and Tyr-170 of the mosquito-larvicidal Bacillus thuringiensis Cry4Ba

The insecticidal activity of Bacillus thuringiensis (Bt) Cry toxins involves toxin stabilization, oligomerization, passage across the peritrophic membrane (PM), binding to midgut receptors and pore-formation. The residues Arg-158 and Tyr-170 have been shown to be crucial for the toxicity of Bt Cry4Ba. We characterized the biological function of these residues. In mosquito larvae, the mutants R158A/E/Q (R158) could hardly penetrate the PM due to a significantly reduced ability to alter PM permeability; the mutant Y170A, however, could pass through the PM, but degraded in the space between the PM and the midgut epithelium. Further characterization by oligomerization demonstrated that Arg-158 mutants failed to form correctly sized high-molecular weight oligomers. This is the first report that Arg-158 plays a role in the formation of Cry4Ba oligomers, which are essential for toxin passage across the PM. Tyr-170, meanwhile, is involved in toxin stabilization in the toxic mechanism of Cry4Ba in mosquito larvae. [BMB Reports 2014; 47(10): 546-551]