In vivo and in vitro bone strain in the owl monkey circumorbital region and the function of the postorbital septum

Anthropoids and tarsiers are the only vertebrates possessing a postorbital septum. This septum, formed by the frontal, alisphenoid, and zygomatic bones, separates the orbital contents from the temporal muscles. Three hypotheses suggest that the postorbital septum evolved to resist stresses acting on the skull during mastication or incision. The facial-torsion hypothesis posits that the septum resists twisting of the face about a rostrocaudal axis during unilateral mastication; the transverse-bending hypothesis argues that the septum resists caudally directed forces acting at the lateral orbital margin during mastication or incision; and the tension hypothesis suggests that the septum resists ventrally directed components of masseter muscle force during mastication and incision. This study evaluates these hypotheses using in vitro and in vivo bone strain data recorded from the circumorbital region of owl monkeys. Incisor loading of an owl monkey skull in vitro bends the face upward in the sagittal plane, compressing the interorbital region rostrocaudally and “buckling” the lateral orbital walls. Unilateral loading of the toothrow in vitro also bends the face in the sagittal plane, compressing the interorbital region rostrocaudally and buckling the working side lateral orbital wall. When the lateral orbital wall is partially cut, so as to reduce the width of its attachment to the braincase, the following changes in circumorbital bone strain patterns occur. During loading of the incisors, lower bone strain magnitudes are recorded in the interorbital region and lateral orbital walls. In contrast, during unilateral loading of the P³, higher bone strain magnitudes are observed in the interorbital region, and generally lower bone strain magnitudes are observed in the lateral orbital walls. During unilateral loading of the M², higher bone strain magnitudes are observed in both the interorbital region and in the lateral orbital wall ipsilateral to the loaded molar. Comparisons of the in vitro results with data gathered in vivo suggest that, during incision and unilateral mastication, the face is subjected to upward bending in the sagittal plane resulting in rostrocaudal compression of the interorbital region. Modeling the lateral orbital walls as curved plates suggests that during mastication the working side wall is buckled due to the dorsally directed component of the maxillary force which causes upward bending of the face in the sagittal plane. The balancing side lateral orbital wall may also be buckled due to upward bending of the face in the sagittal plane as well as being twisted by the caudoventrally directed components of the superficial masseter muscle force. The in vivo data do not exclude the possibility that the postorbital septum functions to improve the structural integrity of the postorbital bar during mastication. However, there is no reason to believe that a more robust postorbital bar could not also perform this function. Hypotheses stating that the postorbital septum originally evolved to reinforce the skull against routine masticatory loads must explain why, rather than evolving a postorbital septum, the stem anthropoids did not simply enlarge their postorbital bars. © 1996 Wiley-Liss, Inc.     

Out-of-plane orientation of cellulose elementary fibrils on spruce tracheid wall based on imaging with high-resolution transmission electron microscopy

Main conclusion

A 3D model of the tracheid wall has been proposed based on high-resolution cryo-TEM where, in contrast to the current understanding, the cellulose elementary fibrils protrude from the cell wall plane. The ultrastructure of the tracheid walls of Picea abies was examined through imaging of ultrathin radial, tangential and transverse sections of wood by transmission electron microscopy and with digital image processing. It was found that the elementary fibrils (EFs) of cellulose were rarely deposited in the plane of the concentric cell wall layers, in contrast to the current understanding. In addition to the adopted concept of longitudinal fibril angle, EFs protruded from the cell wall plane in varying angles depending on the layer. Moreover, the out-of-plane fibril angle varied between radial and tangential walls. In the tangential S₂ layers, EFs were always out-of-plane whereas planar orientation was typical for the S₂ layer in radial walls. The pattern of protruding EFs was evident in almost all axial and transverse images of the S₁ layer. Similar out-of-plane orientation was found in the transverse sections of the S₃ layer. A new model of the tracheid wall with EF orientation is presented as a summary of this study. The outcome of this study will enhance our understanding of the elementary fibril orientation in the tracheid wall.     

The association of polymorphisms in BMP2/MYO1H and skeletal Class II div.1 maxillary and mandibular dimensions. A preliminary ‘report

IntroductionThe genetic impact directly or indirectly predefines maxillofacial dimensions, potentially leading to an inappropriate relationship of the jaws and subsequently skeletal malocclusion. Previous studies focused mainly on genetic polymorphisms and class III malocclusion. This study was set out to investigate the association between genetic polymorphisms in two genes BMP2 (rs235768) and MYO1H (rs11066446) with Class II division 1 malocclusion, skeletal variation in vertical plane, and maxillary and mandibular jaws length.Subjects and methodsSixty patients classified as Skeletal Class I (n = 30) and Class II division 1 (n = 30) were recruited. DNA was extracted from saliva and analyzed by Sanger sequencing. Lateral cephalometric radiographs were measured for the anterio-posterior relationship of maxillary and mandibular arch using digital tracing. Hardy-Weinberg equilibrium analysis of genotype frequencies was performed using Chi-square test to compare genotype distribution among groups and multiple logistic regression analysis adjusted by gender was also performed.ResultsThe rs235768 polymorphism in BMP2 was associated with hypodivergent face, increased maxillary length, and decreased mandibular length. Meanwhile, the rs11066446 polymorphism in MYO1H was associated with decreased mandibular length. New polymorphism was identified in MYO1H (rs10850090) in association with decreased mandibular length.ConclusionA potential association between polymorpisms in BMP2 rs235768 and MOY1H rs11066446 and rs10850090 and Class II division 1 skeletal malocclusion related phenotypes exists, however, the degree of it has to be further investigated and yet to be discovered.     

Venus by Botticelli and Her Pituitary Adenoma

Objective: Simonetta Vespucci, considered the most beautiful woman of the Renaissance, is the inspiration and face of one of the most famous paintings of all times, “The Birth of Venus,” by Botticelli. She died in 1476 at the age of 23 years. We postulate she suffered from a pituitary-secreting tumor progressing to pituitary apoplexy. The goals of this study were 3-fold: (i) verify that the subject depicted by Botticelli in different paintings represents the same woman; (ii) identify the facial traits affected by the progression of a growth hormone– and prolactin-secreting tumor; and (iii) confirm that the observed changes of the face traits observed in the portraits of Simonetta Vespucci are compatible with the facial traits changes identified earlier.Methods: Comparison among face traits was based on the analysis of the face regions measured by means of fiducial points and their distances, and after pose compensation based on three-dimensional head modelling.Results: In favor of the hypothesis that Simonetta suffered from a pituitary growth hormone– and prolactin-secreting tumor stands changes of her lineaments, a feature which becomes evident over the years and particularly manifest in the Allegorical Lady, where galactorrhea is depicted.Conclusion: We conclude that sufficient evidence is presented to suggest that Simonetta Vespucci, the Venus depicted by Botticelli, suffered from pituitary adenoma secreting prolactin and growth hormon with parasellar expansion. The current interpretation of the Venus strabism should be revisited according to this finding.Abbreviation: GH = growth hormone     

Vector and scalar fields in modeling of spatial variations of growth rates within plant organs

The paper confronts a question having broad implication: if it is assumed that growth is symplastic and that the anticlinal and periclinal orientations of newly formed cell walls are maintained during growth, what can then be inferred about the field of the displacement velocity vectors, V, in a growing organ? An answer is approached by describing the V field by means of a scalar field, G, such that V = μ grad G, where μ is a simple function of G. The G field can be fully specified if the pattern of displacement lines and magnitudes of V along one displacement line are known. This may, for example, be along the axis or along a meridional line on the surface. The V field allows calculations of linear, areal and volume growth rate patterns in space as well as expansions in time.     

The <Emphasis Type="Italic">Populus trichocarpa PtHSP17.8</Emphasis> involved in heat and salt stress tolerances

Key message

PtHSP17.8 was regulated by various abiotic stresses. Overexpression of PtHSP17.8 enhanced the tolerance to heat and salt stresses through maintain ROS homeostasis and cooperate with stress-related genes in Arabidopsis.

Abstract

Small heat shock proteins (sHSPs) play important roles in response to diverse biotic and abiotic stresses, especially in heat tolerance. However, limited information is available on the stress tolerance roles of sHSPs in woody species. To explore the function of sHSPs in poplar, we isolated and characterized PtHSP17.8 from Populus trichocarpa. Phylogenetic analysis and subcellular localization revealed that PtHSP17.8 was a cytosolic class I sHSP. The gene expression profile of PtHSP17.8 in various tissues showed that it was significantly accumulated in stem and root, which was consistent with the GUS expression pattern driven by promoter of PtHSP17.8. The expression of PtHSP17.8 could be induced by various abiotic stresses and significantly activated by heat stress. Overexpression of PtHSP17.8 enhanced the tolerance to heat and salt stresses in Arabidopsis. The seedling survival rate, root length, relative water content, antioxidative enzyme activities, proline, and soluble sugar content were increased in transgenic Arabidopsis under heat and salt stresses, but not in normal condition. The co-expression network of PtHSP17.8 were constructed and demonstrated many stress responsive genes included. The stress-related genes in the co-expression network were up-regulated in the PtHSP17.8 overexpression seedlings. These results suggest that PtHSP17.8 confers heat and salt tolerances in plants.

     

Synthesis and fungicidal activity of novel pyrazole derivatives containing 5-Phenyl-2-Furan

Pyrazole constitutes an important heterocyclic family covering a broad range of synthetic as well as natural products that exhibit numerous chemical, biological, agrochemical and pharmacological properties. In order to explore compounds with good fungicidal activity, a series of new pyrazole derivatives containing 5-phenyl-2-furan were designed and synthesized. In vitro and in vivo fungicidal activities were evaluated and the compound ethyl-1-(5-phenylfuran-2-carbonyl)-5-propyl-1H-pyrazole-3-carboxylate (I8) displayed significant fungicidal activity against various fungi, especially against P. infestans. The structures of the novel pyrazole derivatives were confirmed by ¹H NMR, ¹³C NMR, MS, elemental analysis and X-ray single crystal diffraction. Further study showed that compound I8 might act on the synthesis of cell walls from morphological and ultrastructural studies by SEM and TEM. The results also revealed that compound I8 could block the nutritional transportation leading to cells senescence and death. These results suggested that the novel pyrazole derivatives proved to be promising lead compounds.     

Identification and functional characterization of the distinct plant pectin esterases PAE8 and PAE9 and their deletion mutants

Main conclusion

PAE8 and PAE9 have pectin acetylesterase activity and together remove one-third of the cell wall acetate associated with pectin formation in Arabidopsis leaves. In pae8 and pae9 mutants, substantial amounts of acetate accumulate in cell walls. In addition, the inflorescence stem height is decreased. Pectic polysaccharides constitute a significant part of the primary cell walls in dicotyledonous angiosperms. This diverse group of polysaccharides has been implicated in several physiological processes including cell-to-cell adhesion and pathogenesis. Several pectic polysaccharides contain acetyl-moieties directly affecting their physical properties such as gelling capacity, an important trait for the food industry. In order to gain further insight into the biological role of pectin acetylation, a reverse genetics approach was used to investigate the function of genes that are members of the Pectin AcetylEsterase gene family (PAE) in Arabidopsis. Mutations in two members of the PAE family (PAE8 and PAE9) lead to cell walls with an approximately 20 % increase in acetate content. High-molecular-weight fractions enriched in pectic rhamnogalacturonan I (RGI) extracted from the mutants had increased acetate content. In addition, the pae8 mutant displayed increased acetate content also in low-molecular-weight pectic fractions. The pae8/pae9-2 double mutant exhibited an additive effect by increasing wall acetate content by up to 37 %, suggesting that the two genes are not redundant and act on acetyl-substituents of different pectic domains. The pae8 and pae8/pae9-2 mutants exhibit reduced inflorescence growth underscoring the role of pectic acetylation in plant development. When heterologously expressed and purified, both gene products were shown to release acetate from the corresponding mutant pectic fractions in vitro. PAEs play a significant role in modulating the acetylation state of pectic polymers in the wall, highlighting the importance of apoplastic metabolism for the plant cell and plant growth.     

Overexpression of Camellia sinensis H1 histone gene confers abiotic stress tolerance in transgenic tobacco

Key message

Overexpression of CsHis in tobacco promoted chromatin condensation, but did not affect the phenotype. It also conferred tolerance to low-temperature, high-salinity, ABA, drought and oxidative stress in transgenic tobacco.

Abstract

H1 histone, as a major structural protein of higher-order chromatin, is associated with stress responses in plants. Here, we describe the functions of the Camellia sinensis H1 Histone gene (CsHis) to illustrate its roles in plant responses to stresses. Subcellular localization and prokaryotic expression assays showed that the CsHis protein is localized in the nucleus, and its molecular size is approximately 22.5 kD. The expression levels of CsHis in C. sinensis leaves under various conditions were investigated by qRT-PCR, and the results indicated that CsHis was strongly induced by various abiotic stresses such as low-temperature, high-salinity, ABA, drought and oxidative stress. Overexpression of CsHis in tobacco (Nicotiana tabacum) promoted chromatin condensation, while there were almost no changes in the growth and development of transgenic tobacco plants. Phylogenetic analysis showed that CsHis belongs to the H1C and H1D variants of H1 histones, which are stress-induced variants and not the key variants required for growth and development. Stress tolerance analysis indicated that the transgenic tobacco plants exhibited higher tolerance than the WT plants upon exposure to various abiotic stresses; the transgenic plants displayed reduced wilting and senescence and exhibited greater net photosynthetic rate (Pn), stomatal conductance (Gs) and maximal photochemical efficiency (Fv/Fm) values. All the above results suggest that CsHis is a stress-induced gene and that its overexpression improves the tolerance to various abiotic stresses in the transgenic tobacco plants, possibly through the maintenance of photosynthetic efficiency.     

Understanding plant cell-wall remodelling during the symbiotic interaction between <Emphasis Type="Italic">Tuber melanosporum</Emphasis> and <Emphasis Type="Italic">Corylus avellana</Emphasis> using a carbohydrate microarray

Main conclusion

A combined approach, using a carbohydrate microarray as a support for genomic data, has revealed subtle plant cell-wall remodelling during Tuber melanosporum and Corylus avellana interaction. Cell walls are involved, to a great extent, in mediating plant–microbe interactions. An important feature of these interactions concerns changes in the cell-wall composition during interaction with other organisms. In ectomycorrhizae, plant and fungal cell walls come into direct contact, and represent the interface between the two partners. However, very little information is available on the re-arrangement that could occur within the plant and fungal cell walls during ectomycorrhizal symbiosis. Taking advantage of the Comprehensive Microarray Polymer Profiling (CoMPP) technology, the current study has had the aim of monitoring the changes that take place in the plant cell wall in Corylus avellana roots during colonization by the ascomycetous ectomycorrhizal fungus T. melanosporum. Additionally, genes encoding putative plant cell-wall degrading enzymes (PCWDEs) have been identified in the T. melanosporum genome, and RT-qPCRs have been performed to verify the expression of selected genes in fully developed C. avellana/T. melanosporum ectomycorrhizae. A localized degradation of pectin seems to occur during fungal colonization, in agreement with the growth of the ectomycorrhizal fungus through the middle lamella and with the fungal gene expression of genes acting on these polysaccharides.

     

Synthesis of monoamine derivatives of [Ir4(CO)12]. X-ray crystal structure of [Ir4(CO)11(4-picoline)]

The mono-substituted amine derivatives [Ir₄(CO)₁₁L] (L = pyridine (1), 4-methylpyridine (2), 4-ter-butyl pyridine (3), 3,5-dimethylpyridine (4), 3,4-dimethylpyridine (5)) were obtained by the reaction of [Ir₄(CO)₁₁Br]⁻ with the corresponding aromatic amine. In the solid state, cluster 2 has an approximate C_s symmetry with all terminal ligands as shown by an X-ray analysis. In solution, this unbridged structure is in dynamic equilibrium with two other isomeric forms having three edge-bridging CO’s on a common basal face and the amine ligand coordinated in axial or in radial position relative to this face.     

Overexpression of a novel salt stress-induced glycine-rich protein gene from alfalfa causes salt and ABA sensitivity in Arabidopsis

Key message

We cloned a novel salt stress-induced glycine-rich protein gene ( MsGRP ) from alfalfa. Its overexpression retards seed germination and seedling growth of transgenic Arabidopsis after salt and ABA treatments.

Abstract

Since soil salinity is one of the most significant abiotic stresses, salt tolerance is required to overcome salinity-induced reductions in crop productivity. Many glycine-rich proteins (GRPs) have been implicated in plant responses to environmental stresses, but the function and importance of some GRPs in stress responses remain largely unknown. Here, we report on a novel salt stress-induced GRP gene (MsGRP) that we isolated from alfalfa. Compared with some glycine-rich RNA-binding proteins, MsGRP contains no RNA recognition motifs and localizes in the cell membrane or cell wall according to the subcellular localization result. MsGRP mRNA is induced by salt, abscisic acid (ABA), and drought stresses in alfalfa seedlings, and its overexpression driven by a constitutive cauliflower mosaic virus-35S promoter in Arabidopsis plants confers salinity and ABA sensitivity compared with WT plants. MsGRP retards seed germination and seedling growth of transgenic Arabidopsis plants after salt and ABA treatments, which implies that MsGRP may affect germination and growth through an ABA-dependent regulation pathway. These results provide indirect evidence that MsGRP plays important roles in seed germination and seedling growth of alfalfa under some abiotic stress conditions.     

Synthesis and characterization of complexes containing the bis(1, 2-diolato)-oxotechnetium(V) core

The complexes (Bu₄N)[TcO(O₂C₆H₄)₂] (1) and Na[TcO(OCH₂CH₂O)₂] (2) have been prepared by reacting TcOCl₄^- with respective diols in methanol. Compound 2 was identified by its elemental analysis and field desorption mass spectrum. Crystals of compound 1 are monoclinic, C2/c, with cell dimensions a = 10.393(3), b = 13.835(3), c = 20.643(5) Å, β = 101.74(3)° and four formula units in the unit cell. The crystal structure was determined by standard methods and refined to R₁ = 0.0694, R₂ = 0.0613, on the basis of 2887 independent reflections. The data were collected with use of Mo Kα radiation and a Syntex P2₁ diffractometer. The anion of 1 is square pyramidal with a short TcO(oxo) bond (1.648(5) Å). TcO distances to the diolate groups are longer (1.956(3), 1.958(3) Å). The technetium atom lies 0.7014(4) Å out of the plane of the four diolate oxygen atoms. Compound 2 is hydrolytically unstable in pure water, but can be stabilized by the addition of a several-fold molar excess of ethylene glycol. Compound 1 decomposes minimally in pure water after 24 h. These complexes are shown to be good structural models for ^99mTc-radiopharmaceuticals containing purely oxygen-donor ligands. Comparison of the physical properties of the structurally characterized members of the series of complexes with core structures TcOS_xO_(4-x) (x = O, 2, 4) shows a shift to low energy in the frequency of the terminal oxygen-technetium band in the IR correlated with increasing softness of the basal plane donor atom set.