Human ferrochelatase: characterization of substrate-iron binding and proton-abstracting residues

The terminal step in heme biosynthesis, the insertion of ferrous iron into protoporphyrin IX to form protoheme, is catalyzed by the enzyme ferrochelatase (EC 4.99.1.1). A number of highly conserved residues identified from the crystal structure of human ferrochelatase as being in the active site were examined by site-directed mutagenesis. The mutants Y123F, Y165F, Y191H, and R164L each had an increased K(m) for iron without an altered K(m) for porphyrin. The double mutant R164L/Y165F had a 6-fold increased K(m) for iron and a 10-fold decreased V(max). The double mutant Y123F/Y191F had low activity with an elevated K(m) for iron, and Y123F/Y165F had no measurable activity. The mutants H263A/C/N, D340N, E343Q, E343H, and E343K had no measurable enzyme activity, while E343D, E347Q, and H341C had decreased V(max)s without significant alteration of the K(m)s for either substrate. D340E had near-normal kinetic parameters, while D383A and H231A had increased K(m)s for iron. On the basis of these data and the crystal structure of human ferrochelatase, it is proposed that residues E343, H341, and D340 form a conduit from H263 in the active site to the protein exterior and function in proton extraction from the porphyrin macrocycle. The role of H263 as the porphyrin proton-accepting residue is central to catalysis since metalation only occurs in conjunction with proton abstraction. It is suggested that iron is transported from the exterior of the enzyme at D383/H231 via residues W227 and Y191 to the site of metalation at residues R164 and Y165 which are on the opposite side of the active site pocket from H263. This model should be general for mitochondrial membrane-associated eucaryotic ferrochelatases but may differ for bacterial ferrochelatases since the spatial orientation of the enzyme within prokaryotic cells may differ.     

Identification and characterization of solvent-filled channels in human ferrochelatase

Ferrochelatase catalyzes the formation of protoheme from two potentially cytotoxic products, iron and protoporphyrin IX. While much is known from structural and kinetic studies on human ferrochelatase of the dynamic nature of the enzyme during catalysis and the binding of protoporphyrin IX and heme, little is known about how metal is delivered to the active site and how chelation occurs. Analysis of all ferrochelatase structures available to date reveals the existence of several solvent-filled channels that originate at the protein surface and continue to the active site. These channels have been proposed to provide a route for substrate entry, water entry, and proton exit during the catalytic cycle. To begin to understand the functions of these channels, we investigated in vitro and in vivo a number of variants that line these solvent-filled channels. Data presented herein support the role of one of these channels, which originates at the surface residue H240, in the delivery of iron to the active site. Structural studies of the arginyl variant of the conserved residue F337, which resides at the back of the active site pocket, suggest that it not only regulates the opening and closing of active site channels but also plays a role in regulating the enzyme mechanism. These data provide insight into the movement of the substrate and water into and out of the active site and how this movement is coordinated with the reaction mechanism.     

Identification and characterization of an inhibitory metal ion-binding site in ferrochelatase

Ferrochelatase catalyzes the insertion of ferrous iron into protoporphyrin IX to form heme. The severe metal ion substrate inhibition observed during in vitro studies of the purified enzyme is almost completely eliminated by mutation of an active site histidine residue (His-287, murine ferrochelatase numbering) to leucine and reduced over 2 orders of magnitude by mutation of a nearby conserved phenylalanine residue (Phe-283) to leucine. Elimination of substrate inhibition had no effect on the apparent V(max) for Ni(2+), but the apparent K(m) was increased 100-fold, indicating that the integrity of the inhibitory binding site is important for the enzyme to turn over substrates rapidly at low micromolar metal ion concentrations. The inhibitory site was observed to have a pK(a) value of 8.0, and this value was reduced to 7.5 by the F283L mutation and to 7.4 in a naturally occurring positional variant observed in most bacterial ferrochelatases, murine ferrochelatase H287C. A H287N variant was also found to be substrate-inhibited, but unlike the H287C variant, pH dependence of substrate inhibition was largely eliminated. The data indicate that the inhibitory metal ion-binding site is composed of multiple residues but primarily defined by His-287 and Phe-283 and is crucial for optimal activity at low metal ion concentrations. It is proposed that this binding site may be important for ferrous iron acquisition and desolvation in vivo.     

Identification of [2Fe-2S] clusters in microbial ferrochelatases

The terminal enzyme of heme biosynthesis, ferrochelatase (EC 4.99.1.1), catalyzes the insertion of ferrous iron into protoporphyrin IX to form protoheme. Prior to the present work, [2Fe-2S] clusters have been identified and characterized in animal ferrochelatases but not in plant or prokaryotic ferrochelatases. Herein we present evidence that ferrochelatases from the bacteria Caulobacter crescentus and Mycobacterium tuberculosis possess [2Fe-2S] clusters. The enzyme from C. crescentus is a homodimeric, membrane-associated protein while the enzyme from M. tuberculosis is monomeric and soluble. The clusters of the C. crescentus and M. tuberculosis ferrochelatases are ligated by four cysteines but possess ligand spacings that are unlike those of any previously characterized [2Fe-2S] cluster-containing protein, including the ferrochelatase of the yeast Schizosaccharomyces pombe. Thus, the microbial ferrochelatases represent a new group of [2Fe-2S] cluster-containing proteins.     

A new class of [2Fe-2S]-cluster-containing protoporphyrin (IX) ferrochelatases

Protoporphyrin (IX) ferrochelatase catalyses the insertion of ferrous iron into protoporphyrin IX to form haem. These ferrochelatases exist as monomers and dimers, both with and without [2Fe-2S] clusters. The motifs for [2Fe-2S] cluster co-ordination are varied, but in all cases previously reported, three of the four cysteine ligands are present in the 30 C-terminal residues and the fourth ligand is internal. In the present study, we demonstrate that a group of micro-organisms exist which possess protoporphyrin (IX) ferrochelatases containing [2Fe-2S] clusters that are co-ordinated by a group of four cysteine residues contained in an internal amino acid segment of approx. 20 residues in length. This suggests that these ferrochelatases have evolved along a different lineage than other bacterial protoporphyrin (IX) ferrochelatases. For example, Myxococcus xanthus protoporphyrin (IX) ferrochelatase ligates a [2Fe-2S] cluster via cysteine residues present in an internal segment. Site-directed mutagenesis of this ferrochelatase demonstrates that changing one cysteine ligand into serine results in loss of the cluster, but unlike eukaryotic protoporphyrin (IX) ferrochelatases, this enzyme retains its activity. These data support a role for the [2Fe-2S] cluster in iron affinity, and strongly suggest convergent evolution of this feature in prokaryotes.     

Crystal structures of substrate-free and nitrosyl cytochrome p450cin: implications for o(2) activation

The crystal structure of the P450cin substrate-bound nitric oxide complex and the substrate-free form have been determined revealing a substrate-free structure that adopts an open conformation relative to the substrate-bound structure. The region of the I helix that forms part of the O(2) binding pocket shifts from an α helix in the substrate-free form to a π helix in the substrate-bound form. Unique to P450cin is an active site residue, Asn242, in the I helix that H-bonds with the substrate. In most other P450s this residue is a Thr and plays an important role in O(2) activation by participating in an H-bonding network required for O(2) activation. The π/α I helix transition results in the carbonyl O atom of Gly238 moving in to form an H-bond with the water/hydroxide ligand in the substrate-free form. The corresponding residue, Gly248, in the substrate-free P450cam structure experiences a similar motion. Most significantly, in the oxy-P450cam complex Gly248 adopts a position midway between the substrate-free and -bound states. A comparison between these P450cam and the new P450cin structures provides insights into differences in how the two P450s activate O(2). The structure of P450cin complexed with nitric oxide, a close mimic of the O(2) complex, shows that Gly238 is likely to form tighter interactions with ligands than the corresponding Gly248 in P450cam. Having a close interaction between an H-bond acceptor, the Gly238 carbonyl O atom, and the distal oxygen atom of O(2) will promote protonation and hence further reduction of the oxy complex to the hydroperoxy intermediate resulting in heterolytic cleavage of the peroxide O-O bond and formation of the active ferryl intermediate required for substrate hydroxylation.     

Structure and function of ferrochelatase

Ferrochelatase is the terminal enzyme of the heme biosynthetic pathway in all cells. It catalyzes the insertion of ferrous iron into protoporphyrin IX, yielding heme. In eukaryotic cells, ferrochelatase is a mitochondrial inner membrane-associated protein with the active site facing the matrix. Decreased values of ferrochelatase activity in all tissues are a characteristic of patients with protoporphyria. Point-mutations in the ferrochelatase gene have been recently found to be associated with certain cases of erythropoietic protoporphyria. During the past four years, there have been considerable advances in different aspects related to structure and function of ferrochelatase. Genomic and cDNA clones for bacteria, yeast, barley, mouse, and human ferrochelatase have been isolated and sequenced. Functional expression of yeast ferrochelatase in yeast strains deficient in this enzyme, and expression inEscherichia coli and in baculovirusinfected insect cells of different ferrochelatase cDNAs have been accomplished. A recently identified (2Fe-2S) cluster appears to be a structural feature shared among mammalian ferrochelatases. Finally, functional studies of ferrochelatase site-directed mutants, in which key amino acids were replaced with residues identified in some cases of protoporphyria, will be summarized in the context of protein structure.     

Porphyrin interactions with wild-type and mutant mouse ferrochelatase

Ferrochelatase (EC 4.99.1.1), the terminal enzyme of the heme biosynthetic pathway, catalyzes Fe(2+) chelation into protoporphyrin IX. Resonance Raman and UV-vis absorption spectroscopies of wild-type and engineered variants of murine ferrochelatase were used to examine the proposed structural mechanism for iron insertion into porphyrin. The recombinant variants (i.e., H207N and E287Q) are enzymes in which the conserved amino acids histidine-207 and glutamate-287 of murine ferrochelatase were substituted with asparagine and glutamine, respectively. Both of these residues are at the active site of the enzyme as deduced from the Bacillus subtilis ferrochelatase three-dimensional structure. On the basis of changes in the UV-vis absorption spectrum, addition of free-base or metalated porphyrins to wild-type ferrochelatase and H207N variant yields a 1:1 complex, most likely a monomeric protein-bound species at the active site. In contrast, the addition of porphyrin (either free base or metalated) to E287Q is substoichiometric, as this variant retains bound porphyrin in the active site during isolation and purification. The specificity of porphyrin binding is confirmed by the narrowing of the structure-sensitive lines and the vinyl vibrational mode in the resonance Raman spectra. Shifts in the resonance Raman lines of free-base and metalated porphyrins bound to the wild-type ferrochelatase indicate a nonplanar distortion of the porphyrin macrocycle. However, the magnitude of the distortion cannot be determined without first defining the specific type of deformation. Significantly, the extent of the nonplanar distortion varies in the case of H207N- and E287Q-bound porphyrins. In fact, resonance Raman spectral decompositions indicate a homogeneous ruffled deformation for the nickel protoporphyrin bound to the wild-type ferrochelatase, whereas both planar and ruffled conformations are present for the H207N-bound porphyrin. Perhaps more revealing is the unusual resonance Raman spectrum of the endogenous E287Q-bound porphyrin, which has the structure-sensitive lines greatly upshifted relative to those of the free-base protoporphyrin in solution. This could be interpreted as an equilibrium between protein conformers, one of which favors a highly distorted porphyrin macrocycle. Taken together, these findings suggest that distortion occurs in murine ferrochelatase for some porphyrins, even without metal binding, which is apparently required for the yeast ferrochelatase.     

Purification and properties of ferrochelatase from Chironomidae larvae

Ferrochelatase with an M_r of 42,700 Da and a pI of 7.35 has been purified to homogeneity from chironomidae larvae. The activity of the enzyme reached maximum at pH 7.8 and decreased with the increase of pH. The enzyme activity varied with temperature and showed maximum activity around 37°C. The purified enzyme was active towards protoporphyrin but inactive towards other porphyrins. The specific enzyme activity of ferrochelatase from chironomidae is about 10-fold higher than that of the rat. Electrophoresis of the purified fractions shows that the enzyme contains only one single polypeptide. The soluble ferrochelatase contained one mole of iron in each mole of the enzyme. The N-terminal sequence analysis of the enzyme shows a high percentage of conserved regions of the enzyme among other species. The enzyme properties are similar to those of the mammalian ferrochelatases except with slightly higher specific activity. Chironomidae ferrochelatase appeared to be more heat resistant and less susceptible than its mammalian equivalent to inhibition by lead.     

Crystal structure of substrate-free Pseudomonas putida cytochrome P-450

The crystal structure of Pseudomonas putida cytochrome P-450cam in the substrate-free form has been refined at 2.20-A resolution and compared to the substrate-bound form of the enzyme. In the absence of the substrate camphor, the P-450cam heme iron atom is hexacoordinate with the sulfur atom of Cys-357 providing one axial heme ligand and a water molecule or hydroxide ion providing the other axial ligand. A network of hydrogen-bonded solvent molecules occupies the substrate pocket in addition to the iron-linked aqua ligand. When a camphor molecule binds, the active site waters including the aqua ligand are displaced, resulting in a pentacoordinate high-spin heme iron atom. Analysis of the Fno camphor - F camphor difference Fourier and a quantitative comparison of the two refined structures reveal that no detectable conformational change results from camphor binding other than a small repositioning of a phenylalanine side chain that contacts the camphor molecule. However, large decreases in the mean temperature factors of three separate segments of the protein centered on Tyr-96, Thr-185, and Asp-251 result from camphor binding. This indicates that camphor binding decreases the flexibility in these three regions of the P-450cam molecule without altering the mean position of the atoms involved.     

Nickel(II) chelatase variants directly evolved from murine ferrochelatase: porphyrin distortion and kinetic mechanism

The heme biosynthetic pathway culminates with the ferrochelatase-catalyzed ferrous iron chelation into protoporphyrin IX to form protoheme. The catalytic mechanism of ferrochelatase has been proposed to involve the stabilization of a nonplanar porphyrin to present the pyrrole nitrogens to the metal ion substrate. Previously, we hypothesized that the ferrochelatase-induced nonplanar distortions of the porphyrin substrate impose selectivity for the divalent metal ion incorporated into the porphyrin ring and facilitate the release of the metalated porphyrin through its reduced affinity for the enzyme. Using resonance Raman spectroscopy, the structural properties of porphyrins bound to the active site of directly evolved Ni(2+)-chelatase variants are now examined with regard to the mode and extent of porphyrin deformation and related to the catalytic properties of the enzymes. The Ni(2+)-chelatase variants (S143T, F323L, and S143T/F323L), which were directly evolved to exhibit an enhanced Ni(2+)-chelatase activity over that of the parent wild-type ferrochelatase, induced a weaker saddling deformation of the porphyrin substrate. Steady-state kinetic parameters of the evolved variants for Ni(2+)- and Fe(2+)-chelatase activities increased compared to those of wild-type ferrochelatase. In particular, the reduced porphyrin saddling deformation correlated with increased catalytic efficiency toward the metal ion substrate (Ni(2+) or Fe(2+)). The results lead us to propose that the decrease in the induced protoporphyrin IX saddling mode is associated with a less stringent metal ion preference by ferrochelatase and a slower porphyrin chelation step.     

The 2.0 A structure of human ferrochelatase, the terminal enzyme of heme biosynthesis

Human ferrochelatase (E.C. 4.99.1.1) is a homodimeric (86 kDa) mitochondrial membrane-associated enzyme that catalyzes the insertion of ferrous iron into protoporphyrin to form heme. We have determined the 2.0 A structure from the single wavelength iron anomalous scattering signal. The enzyme contains two NO-sensitive and uniquely coordinated [2Fe-2S] clusters. Its membrane association is mediated in part by a 12-residue hydrophobic lip that also forms the entrance to the active site pocket. The positioning of highly conserved residues in the active site in conjunction with previous biochemical studies support a catalytic model that may have significance in explaining the enzymatic defects that lead to the human inherited disease erythropoietic protoporphyria.     

Crosstalk between metal ions in Bacillus subtilis ferrochelatase

Ferrochelatase (EC 4.99.1.1), the terminal enzyme in the heme biosynthetic pathway, catalyzes the insertion of Fe²⁺ into protoporphyrin IX, generating heme. In vitro assays have shown that all characterized ferrochelatases can also incorporate Zn²⁺ into protoporphyrin IX. Previously Zn²⁺ has been observed at an inner metal binding site close to the porphyrin binding site. Mg²⁺, which stimulates Zn²⁺ insertion by Bacillus subtilis ferrochelatase, has been observed at an outer metal binding site. Exchange of Glu272 to a serine eliminated the stimulative effect of Mg²⁺. We found that Zn²⁺ quenched the fluorescence of B. subtilis ferrochelatase and this quenching was used to estimate the metal affinity. Trp230 was identified as the intrinsic fluorophore responsible for the observed quenching pattern. The affinity for Zn²⁺ could be increased by incubating the ferrochelatase with the transition state analogue N-methyl mesoporphyrin IX, which reflected a close collaborative arrangement between the two substrates in the active site. We also showed that the affinity for Zn²⁺ was lowered in the presence of Mg²⁺ and that bound Zn²⁺ was released upon binding of Mg²⁺. In the ferrochelatase with a Glu272Ser modification, the interaction between Zn²⁺ and Mg²⁺ was abolished. It could thereby be demonstrated that the presence of a metal at one metal binding site affected the metal affinity of another, providing the enzyme with a site that regulates the enzymatic activity.     

Allosteric changes in solvent accessibility observed in thrombin upon active site occupation

The solvent accessibility of thrombin in its substrate-free and substrate-bound forms has been compared by amide hydrogen/deuterium (H/(2)H) exchange. The optimized inhibitor peptide dPhe-Pro-Arg chloromethyl ketone (PPACK) was used to simulate the substrate-bound form of thrombin. These studies were motivated by the lack of observed changes in the active site of thrombin in the crystal structure of the thrombin-thrombomodulin complex. This result appeared to contradict amide exchange studies on the thrombin-thrombomodulin complex that suggested subtle changes occur in the active site loops upon thrombomodulin binding. Our results show that two active site loops, residues 214-222 and residues 126-132, undergo decreases in solvent accessibility due to steric contacts with PPACK substrate. However, we also observe two regions outside the active site undergoing solvent protection upon substrate binding. The first region corresponds to anion binding exosite 1, and the second is a beta-strand-containing loop which runs through the core of the molecule and contains Trp141 which makes critical contacts with anion binding exosite 1. These results indicate two pathways of allosteric change that connect the active site to the distal anion binding exosite 1.     

Bacterial ferrochelatase turns human: Tyr13 determines the apparent metal specificity of <Emphasis Type="Italic">Bacillus subtilis</Emphasis> ferrochelatase

Ferrochelatase catalyzes the insertion of Fe²⁺ into protoporphyrin IX. The enzymatic product heme (protoheme IX) is a well-known cofactor in a wide range of proteins. The insertion of metal ions other than Fe²⁺ occurs rarely in vivo, but all ferrochelatases that have been studied can insert Zn²⁺ at a good rate in vitro. Co²⁺, but not Cu²⁺, is known to be a good substrate of the mammalian and Saccharomyces cerevisiae ferrochelatases. In contrast, Cu²⁺, but not Co²⁺, has been found to be a good substrate of bacterial Bacillus subtilis ferrochelatase. It is not known how ferrochelatase discriminates between different metal ion substrates. Structural analysis of B. subtilis ferrochelatase has shown that Tyr13 is an indirect ligand of Fe²⁺ and a direct ligand of a copper mesoporphyrin product. A structure-based comparison revealed that Tyr13 aligns with a Met residue in the S. cerevisiae and human ferrochelatases. Tyr13 was changed to Met in the B. subtilis enzyme by site-directed mutagenesis. Enzymatic measurements showed that the modified enzyme inserted Co²⁺ at a higher rate than the wild-type B. subtilis ferrochelatase, but it had lost the ability to use Cu²⁺ as a substrate. Thus, the B. subtilis Tyr13Met ferrochelatase showed the same metal specificity as that of the ferrochelatases from S. cerevisiae and human.     

Substrate-induced conformational change of a coenzyme B12-dependent enzyme: crystal structure of the substrate-free form of diol dehydratase

Substrate binding triggers catalytic radical formation through the cobalt-carbon bond homolysis in coenzyme B12-dependent enzymes. We have determined the crystal structure of the substrate-free form of Klebsiella oxytoca diol dehydratase*cyanocobalamin complex at 1.85 A resolution. The structure contains two units of the heterotrimer consisting of alpha, beta, and gamma subunits. As compared with the structure of its substrate-bound form, the beta subunits are tilted by approximately 3 degrees and cobalamin is also tilted so that pyrrole rings A and D are significantly lifted up toward the substrate-binding site, whereas pyrrole rings B and C are only slightly lifted up. The structure revealed that the potassium ion in the substrate-binding site of the substrate-free enzyme is also heptacoordinated; that is, two oxygen atoms of two water molecules coordinate to it instead of the substrate hydroxyls. A modeling study in which the structures of both the cobalamin moiety and the adenine ring of the coenzyme were superimposed onto those of the enzyme-bound cyanocobalamin and the adenine ring-binding pocket, respectively, demonstrated that the distortions of the Co-C bond in the substrate-free form are already marked but slightly smaller than those in the substrate-bound form. It was thus strongly suggested that the Co-C bond becomes largely activated (labilized) when the coenzyme binds to the apoenzyme even in the absence of substrate and undergoes homolysis through the substrate-induced conformational changes of the enzyme. Kinetic coupling of Co-C bond homolysis with hydrogen abstraction from the substrate shifts the equilibrium to dissociation.     

Substrate inhibition of acetylcholinesterase: residues affecting signal transduction from the surface to the catalytic center.

Amino acids located within and around the 'active site gorge' of human acetylcholinesterase (AChE) were substituted. Replacement of W86 yielded inactive enzyme molecules, consistent with its proposed involvement in binding of the choline moiety in the active center. A decrease in affinity to propidium and a concomitant loss of substrate inhibition was observed in D74G, D74N, D74K and W286A mutants, supporting the idea that the site for substrate inhibition and the peripheral anionic site overlap. Mutations of amino acids neighboring the active center (E202, Y337 and F338) resulted in a decrease in the catalytic and the apparent bimolecular rate constants. A decrease in affinity to edrophonium was observed in D74, E202, Y337 and to a lesser extent in F338 and Y341 mutants. E202, Y337 and Y341 mutants were not inhibited efficiently by high substrate concentrations. We propose that binding of acetylcholine, on the surface of AChE, may trigger sequence of conformational changes extending from the peripheral anionic site through W286 to D74, at the entrance of the 'gorge', and down to the catalytic center (through Y341 to F338 and Y337). These changes, especially in Y337, could block the entrance/exit of the catalytic center and reduce the catalytic efficiency of AChE.     

Amino acid residues His183 and Glu264 in Bacillus subtilis ferrochelatase direct and facilitate the insertion of metal ion into protoporphyrin IX

Ferrochelatase catalyzes the terminal step in the heme biosynthetic pathway, i.e., the incorporation of Fe(II) into protoporphyrin IX. Various biochemical and biophysical methods have been used to probe the enzyme for metal binding residues and the location of the active site. However, the location of the metal binding site and the path of the metal into the porphyrin are still disputed. Using site-directed mutagenesis on Bacillus subtilis ferrochelatase we demonstrate that exchange of the conserved residues His183 and Glu264 affects the metal affinity of the enzyme. We also present the first X-ray crystal structure of ferrochelatase with iron. Only a single iron was found in the active site, coordinated in a square pyramidal fashion by two amino acid residues, His183 and Glu264, and three water molecules. This iron was not present in the structure of a His183Ala modified ferrochelatase. The results strongly suggest that the insertion of a metal ion into protoporphyrin IX by ferrochelatase occurs from a metal binding site represented by His183 and Glu264.     

Two types of ferrochelatase in photosynthetic and nonphotosynthetic tissues of cucumber: their difference in phylogeny, gene expression, and localization.

Ferrochelatase catalyzes the insertion of Fe(2+) into protoporphyrin IX to generate protoheme. In higher plants, there is evidence for two isoforms of this enzyme that fulfill different roles. Here, we describe the isolation of a second ferrochelatase cDNA from cucumber (CsFeC2) that was less similar to a previously isolated isoform (CsFeC1) than it was to some ferrochelatases from other higher plants. In in vitro import experiments, the two cucumber isoforms showed characteristics similar to their respective ferrochelatase counterparts of Arabidopsis thaliana. The C-terminal region of CsFeC2 but not CsFeC1 contained a conserved motif found in light-harvesting chlorophyll proteins, and CsFeC2 belonged to a phylogenetic group of plant ferrochelatases containing this conserved motif. We demonstrate that CsFeC2 was localized predominantly in thylakoid membranes as an intrinsic protein, and forming complexes probably with the C-terminal conserved motif, but a minor portion was also detected in envelope membranes. CsFeC2 mRNA was detected in all tissues and was light-responsive in cotyledons, whereas CsFeC1 mRNA was detected in nonphotosynthetic tissues and was not light-responsive. Interestingly, tissue-, light-, and cycloheximide-dependent expressions of the two isoforms of ferrochelatase were similar to those of two glutamyl-tRNA reductase isoforms involved in the early step of tetrapyrrole biosynthesis, suggesting the existence of distinctly controlled tetrapyrrole biosynthetic pathways in photosynthetic and nonphotosynthetic tissues.     

Binding of protoporphyrin IX and metal derivatives to the active site of wild-type mouse ferrochelatase at low porphyrin-to-protein ratios

Resonance Raman (RR) spectroscopy is used to examine porphyrin substrate, product, and inhibitor interactions with the active site of murine ferrochelatase (EC 4.99.1.1), the terminal enzyme in the biosynthesis of heme. The enzyme catalyzes in vivo Fe(2+) chelation into protoporphyrin IX to give heme. The RR spectra of native ferrochelatase show that the protein, as isolated, contains varying amounts of endogenously bound high- or low-spin ferric heme, always at much less than 1 equiv. RR data on the binding of free-base protoporphyrin IX and its metalated complexes (Fe(III), Fe(II), and Ni(II)) to active wild-type protein were obtained at varying ratios of porphyrin to protein. The binding of ferric heme, a known inhibitor of the enzyme, leads to the formation of a low-spin six-coordinate adduct. Ferrous heme, the enzyme's natural product, binds in the ferrous high-spin five-coordinate state. Ni(II) protoporphyrin, a metalloporphyrin that has a low tendency toward axial ligation, becomes distorted when bound to ferrochelatase. Similarly for free-base protoporphyrin, the natural substrate of ferrochelatase, the RR spectra of porphyrin-protein complexes reveal a saddling distortion of the porphyrin. These results corroborate and extend our previous findings that porphyrin distortion, a crucial step of the catalytic mechanism, occurs even in the absence of bound metal substrate. Moreover, RR data reveal the presence of an amino acid residue in the active site of ferrochelatase which is capable of specific axial ligation to metals.