Contribution of disulfide bonds to the conformational stability and catalytic activity of ribonuclease A.

Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage.     

Mass Spectrometric Evidence for an Alternate Disulfide Bond in Chloroplast Fructose Bisphosphatase

Mass mapping analysis based on cyanylation (CN) of the protein and CN-induced cleavage indicates that all three cysteine residues in the insertion into the light-activated pea leaf chloroplast fructose bisphosphatase (E.C. 3.1.3.11) are able to participate in disulfide bond formation. There is a major peak in the mass spectrum of the cleavage products indicating that Cys173 forms a disulfide bond with Cys153, consistent with the structure of the oxidized enzyme in PDB files 1d9q and 1dcu, and a minor peak indicating that Cys173 forms an alternate disulfide bond with Cys178. The Cys173-Cys178 disulfide bond was not apparent in the available crystal structures.     

In vivo formation and stability of engineered disulfide bonds in subtilisin

Computer modeling suggested that a disulfide bond could be built into Bacillus amyloliquefaciens subtilisin between positions 22 (wild-type, Thr) and 87 (Ser) or between positions 24 (Ser) and 87 (Ser). Single cysteines were introduced into this cysteine-free protease at positions 22, 24, or 87 by site-directed mutagenesis of the cloned subtilisin gene. The corresponding double-cysteine mutants were constructed, and recombinant plasmids were expressed in Bacillus subtilis. Double-cysteine mutant enzymes were secreted as efficiently as wild-type, and disulfide bonds were formed quantitatively in vivo. These disulfide bonds were introduced approximately 24 A away from the catalytic site and had no detectable effect on either the specific activities or the pH optima of the mutant enzymes. The equilibrium constants for the reduction of the mutant disulfide bonds by dithiothreitol were determined to be 82 +/- 22 and 20 +/- 5 for Cys22/Cys87 and Cys24/Cys87, respectively. Studies of autoproteolytic inactivation of wild-type subtilisin support a relationship between autolytic stability and conformational stability of the protein. The stabilities of Cys24/Cys87 and wild-type enzymes to autolysis were essentially the same; however, Cys22/Cys87 was actually less stable to autolysis. Reduction of the disulfide cross-bridge lowered the autolytic stability of both double-cysteine mutants relative to their disulfide forms. This correlates with a lowered autolytic stability for the Cys22 and Cys87 single-cysteine mutants, and the fact that an intramolecular hydrogen bond between the hydroxyl groups of Thr22 and Ser87 is likely to be disrupted in the Cys22 and Cys87 single-cysteine mutant proteins.     

Structural determinants of the half-life and cleavage site preference in the autolytic inactivation of chymotrypsin.

The molecular mechanism of the autolysis of rat alpha-chymotrypsin B was investigated. In addition to the two already known autolytic sites, Tyr146 and Asn147, a new site formed by Phe114 was identified. The former two sites and the latter one are located in the autolysis and the interdomain loops, respectively. By eliminating these sites by site-directed mutagenesis, their involvement in the autolysis and autolytic inactivation processes was studied. Mutants Phe114-->Ile and Tyr146-->His/Asn147-->Ser, that had the same enzymatic activity and molecular stability as the wild-type enzyme, displayed altered routes of autolytic degradation. The Phe114-->Ile mutant also exhibited a significantly slower autolytic inactivation (its half-life was 27-fold longer in the absence and sixfold longer in the presence of Ca2+ ions) that obeyed a first order kinetics instead of the second order displayed by wild-type chymotrypsin inactivation. The comparison of autolysis and autolytic inactivation data showed that: (a) the preferential cleavage of sites followed the order of Tyr146-Asn147 --> Phe114 --> other sites; (b) the cleavage rates at sites Phe114 and Tyr146-Asn147 were independent from each other; and (c) the hydrolysis of the Phe114-Ser115 bond was the rate determining step in autolytic inactivation. Thus, it is the cleavage of the interdomain loop and not of the autolysis or other loops that determines the half-life of chymotrypsin activity.     

Characterization of Alzheimer's beta -secretase protein BACE. A pepsin family member with unusual properties

The cerebral deposition of amyloid beta-peptide is an early and critical feature of Alzheimer's disease. Amyloid beta-peptide is released from the amyloid precursor protein by the sequential action of two proteases, beta-secretase and gamma-secretase, and these proteases are prime targets for therapeutic intervention. We have recently cloned a novel aspartic protease, BACE, with all the known properties of beta-secretase. Here we demonstrate that BACE is an N-glycosylated integral membrane protein that undergoes constitutive N-terminal processing in the Golgi apparatus. We have used a secreted Fc fusion-form of BACE (BACE-IgG) that contains the entire ectodomain for a detailed analysis of posttranslational modifications. This molecule starts at Glu(46) and contains four N-glycosylation sites (Asn(153), Asn(172), Asn(223), and Asn(354)). The six Cys residues in the ectodomain form three intramolecular disulfide linkages (Cys(216)-Cys(420), Cys(278)-Cys(443), and Cys(330)-Cys(380)). Despite the conservation of the active site residues and the 30-37% amino acid homology with known aspartic proteases, the disulfide motif is fundamentally different from that of other aspartic proteases. This difference may affect the substrate specificity of the enzyme. Taken together, both the presence of a transmembrane domain and the unusual disulfide bond structure lead us to conclude that BACE is an atypical pepsin family member.     

NMR structure of a variant human prion protein with two disulfide bridges

The nuclear magnetic resonance structure of the globular domain with residues 121-230 of a variant human prion protein with two disulfide bonds, hPrP(M166C/E221C), shows the same global fold as wild-type hPrP(121-230). It contains three alpha-helices of residues 144-154, 173-194 and 200-228, an anti-parallel beta-sheet of residues 128-131 and 161-164, and the disulfides Cys166-Cys221 and Cys179-Cys214. The engineered extra disulfide bond in the presumed "protein X"-binding site is accommodated with slight, strictly localized conformational changes. High compatibility of hPrP with insertion of a second disulfide bridge in the protein X epitope was further substantiated by model calculations with additional variant structures. The ease with which the hPrP structure can accommodate a variety of locations for a second disulfide bond within the presumed protein X-binding epitope suggests a functional role for the extensive perturbation by a natural second disulfide bond of the corresponding region in the human doppel protein.     

Direct identification of disulfide bond linkages in human insulin-like growth factor I (IGF-I) by chemical synthesis

The primary structure of human IGF-I, except for the disulfide bond system, has been reported by Rinderknecht and Humbel. IGF-I afforded the corresponding characteristic peptide fragment on V8 protease digestion, which contained Cys6, Cys47, Cys48, and Cys52. Two possible fragments, Type I with Cys6-Cys47 and Cys48-Cys52, and Type II with Cys6-Cys48 and Cys47-Cys52, were synthesized. The disulfide bond system of IGF-I was unequivocally determined to be the Type II form along with Cys18-Cys61. Interestingly, the Type I system was included in the disulfide bond isomer produced as the main by-product in the refolding step on IGF-I synthesis by the recombinant DNA method.     

Cloning and analysis of WF146 protease, a novel thermophilic subtilisin-like protease with four inserted surface loops

Cloning and sequencing of the gene encoding WF146 protease, an extracellular subtilisin-like protease from the thermophile Bacillus sp. WF146, revealed that the WF146 protease was translated as a 416-amino acid precursor consisting of a putative 18-amino acid signal peptide, a 10-kDa N-terminal propeptide and a 32-kDa mature protease region. The mature WF146 protease shares a high degree of amino acid sequence identity with two psychrophilic subtilisins, S41 (68.2%) and S39 (65.4%), and a mesophilic subtilisin, SSII (67.1%). Significantly, these closely related proteases adapted to different temperatures all had four inserted surface loops not found in other subtilisins. However, unlike those of S41, S39 and SSII, the inserted loops of the WF146 protease possessed stabilizing features, such as the introduction of Pro residues into the loop regions. Interestingly, the WF146 protease contained five of the seven mutations previously found in a hyperstable variant of subtilisin S41 obtained by directed evolution. The proform of WF146 protease (pro-WF146 protease) was overexpressed in Escherichia coli in an inactive soluble form. After heat treatment, the 42-kDa pro-WF146 protease converted to a 32-kDa active mature form by processing the N-terminal propeptide. The purified mature WF146 protease hydrolyzed casein with an optimum temperature of 85 degrees C, and lost activity with a half-life of 30 min at 80 degrees C in the presence of 10 mM CaCl2.     

Human acid sphingomyelinase.

Human acid sphingomyelinase (haSMase, EC 3.1.4.12) catalyzes the lysosomal degradation of sphingomyelin to ceramide and phosphorylcholine. An inherited haSMase deficiency leads to Niemann-Pick disease, a severe sphingolipid storage disorder. The enzyme was purified and cloned over 10 years ago. Since then, only a few structural properties of haSMase have been elucidated. For understanding of its complex functions including its role in certain signaling and apoptosis events, complete structural information about the enzyme is necessary. Here, the identification of the disulfide bond pattern of haSMase is reported for the first time. Functional recombinant enzyme expressed in SF21 cells using the baculovirus expression system was purified and digested by trypsin. MALDI-MS analysis of the resulting peptides revealed the four disulfide bonds Cys120-Cys131, Cys385-Cys431, Cys584-Cys588 and Cys594-Cys607. Two additional disulfide bonds (Cys221-Cys226 and Cys227-Cys250) which were not directly accessible by tryptic cleavage, were identified by a combination of a method of partial reduction and MALDI-PSD analysis. In the sphingolipid activator protein (SAP)-homologous N-terminal domain of haSMase, one disulfide bond was assigned as Cys120-Cys131. The existence of two additional disulfide bridges in this region was proved, as was expected for the known disulfide bond pattern of SAP-type domains. These results support the hypothesis that haSMase possesses an intramolecular SAP-type activator domain as predicted by sequence comparison [Ponting, C.P. (1994) Protein Sci., 3, 359-361]. An additional analysis of haSMase isolated from human placenta shows that the recombinant and the native human protein possess an identical disulfide structure.     

The primary structure of cassowary (Casuarius casuarius) goose type lysozyme

The complete amino acid sequence of cassowary (Casuarius casuarius) goose type lysozyme was analyzed by direct protein sequencing of peptides obtained by cleavage with trypsin, V8 protease, chymotrypsin, lysyl endopeptidase, and cyanogen bromide. The N-terminal residue of the enzyme was deduced to be a pyroglutamate group by analysis with a LC/MS/MS system equipped with the oMALDI ionization source, and then confirmed by a glutamate aminopeptidase enzyme. The blocked N-terminal is the first reported in this enzyme group. The positions of disulfide bonds in this enzyme were chemically identified as Cys4-Cys60 and Cys18-Cys29. Cassowary lysozyme was proved to consist of 185 amino acid residues and had a molecular mass of 20408 Da calculated from the amino acid sequence. The amino acid sequence of cassowary lysozyme compared to that of reported G-type lysozymes had identities of 90%, 83%, and 81%, for ostrich, goose, and black swan lysozymes, respectively. The amino acid substitutions at PyroGlu1, Glu19, Gly40, Asp82, Thr102, Thr156, and Asn167 were newly detected in this enzyme group. The substituted amino acids that might contribute to substrate binding were found at subsite B (Asn122Ser, Phe123Met). The amino acid sequences that formed three alpha-helices and three beta-sheets were completely conserved. The disulfide bond locations and catalytic amino acid were also strictly conserved. The conservation of the three alpha-helices structures and the location of disulfide bonds were considered to be important for the formation of the hydrophobic core structure of the catalytic site and for maintaining a similar three-dimensional structure in this enzyme group.     

Structural stability of human alpha-thrombin studied by disulfide reduction and scrambling

Human alpha-thrombin is a very important plasma serine protease, which is involved in physiologically vital processes like hemostasis, thrombosis, and activation of platelets. Knowledge regarding the structural stability of alpha-thrombin is essential for understanding its biological regulation. Here, we investigated the structural and conformational stability of alpha-thrombin using the techniques of disulfide reduction and disulfide scrambling. alpha-Thrombin is composed of a light A-chain (36 residues) and a heavy B-chain (259 residues) linked covalently by an inter-chain disulfide bond (Cys(1)-Cys(122)). The B-chain is stabilized by three intra-chain disulfide bonds (Cys(42)-Cys(58), Cys(168)-Cys(182), and Cys(191)-Cys(220)) (Chymotrypsinogen nomenclature). Upon reduction with dithiothreitol (DTT), alpha-thrombin unfolded in a 'sequential' manner with sequential reduction of Cys(168)-Cys(182) within the B-chain followed by the inter-chain disulfide, generating two distinct partially reduced intermediates, I-1 and I-2, respectively. Conformational stability of alpha-thrombin was investigated by the technique of disulfide scrambling. alpha-Thrombin denatures by scrambling its native disulfide bonds in the presence of denaturant [urea, guanidine hydrochloride (GdmCl) or guanidine thiocyanate (GdmSCN)] and a thiol initiator. During the process, cleavage of the inter-chain disulfide bond and release of the A-chain from B-chain was the foremost event. The three disulfides in the B-chain subsequently scrambled to form three major isomers (designated as X-Ba, X-Bb, and X-Bc). Complete denaturation of alpha-thrombin was observed at low concentrations of denaturants (0.5 M GdmSCN, 1.5 M GdmCl, or 3 M urea) indicating low conformational stability of the protease.     

The Functions of Crucial Cysteine Residues in the Arsenite Methylation Catalyzed by Recombinant Human Arsenic (III) Methyltransferase

Arsenic (III) methyltransferase (AS3MT) is a cysteine (Cys)-rich enzyme that catalyzes the biomethylation of arsenic. To investigate how these crucial Cys residues promote catalysis, we used matrix-assisted laser desorption ionization-time of flight-mass spectrometry (MALDI-TOF-MS) to analyze Cys residues in recombinant human arsenic (III) methyltransferase (hAS3MT). We detected two disulfide bonds, Cys250-Cys32 and Cys368-Cys369, in hAS3MT. The Cys250-Cys32 disulfide bond was reduced by glutathione (GSH) or other disulfide bond reductants before the enzymatic methylation of arsenite (iAs³⁺). In addition to exposing residues around the active sites, cleavage of the Cys250-Cys32 pair modulated the conformation of hAS3MT. This adjustment may stabilize the binding of S-Adenosyl-L-methionine (AdoMet) and favor iAs³⁺ binding to hAS3MT. Additionally, we observed the intermediate of Cys250-S-adenosylhomocysteine (AdoHcy), suggesting that Cys250 is involved in the transmethylation. In recovery experiments, we confirmed that trivalent arsenicals were substrates for hAS3MT, methylation of arsenic occurred on the enzyme, and an intramolecular disulfide bond might be formed after iAs³⁺ was methylated to dimethylarsinous acid (DMA³⁺). In this work, we clarified both the functional roles of GSH and the crucial Cys residues in iAs³⁺ methylation catalyzed by hAS3MT.     

Evidence for difference in the roles of two cysteine residues involved in disulfide bond formation in the folding of human lysozyme

Human lysozyme is made up of 130 amino acid residues and has four disulfide bonds at Cys6-Cys128, Cys30-Cys116, Cys65-Cys81, and Cys77-Cys95. Our previous results using the Saccharomyces cerevisiae secretion system indicate that the individual disulfide bonds of human lysozyme have different functions in the correct in vivo folding and enzymatic activity of the protein (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). In this paper, we report the results of experiments that were focused on the roles of Cys65 and Cys81 in the folding of human lysozyme protein in yeast. A mutant protein (C81A), in which Cys81 was replaced with Ala, had almost the same enzymatic activity and conformation as those of the native enzyme. On the other hand, another mutant (C65A), in which Cys65 was replaced with Ala, was not found to fold correctly. These results indicate that Cys81 is not a requisite for both correct folding and activity, whereas Cys65 is indispensable. The mutant protein C81A is seen to contain a new, non-native disulfide bond at Cys65-Cys77. The possible occurrence of disulfide bond interchange during our mapping experiments cannot be ruled out by the experimental techniques presently available, but characterization of other mutant proteins and computer analysis suggest that the intramolecular exchange of disulfide bonds is present in the folding pathway of human lysozyme in vivo.     

Location of disulfide bonds in mature alpha-L-fucosidase from pea.

Fuc-9 is the mature form of a vacuolar alpha-L-fucosidase enzyme which seems to play an important role in plant growth regulation. Fuc-9 is a 202-residue protein containing five Cys residues located at positions 64, 109, 127, 162 and 169. In this study, the disulfide structure of Fuc-9 was determined by MALDI-TOF mass spectrometry (MS), with minimal clean-up of the samples and at a nanomolar scale. Two strategies, based on a specific chemical cleavage (with 2-nitro-5-thiocyanobenzoic acid and alkaline conditions) at the Cys residues and modification of Cys residues by acrylamide/deuterium labeled acrylamide alkylation, were used. Using these methods, the disulfide pairings Cys64-Cys109 and Cys162-Cys169 could be established. The advantages and limitations of our experimental approach are discussed.     

Disulfide arrangement of human insulin-like growth factor I derived from yeast and plasma.

The disulfide arrangement of yeast derived human insulin-like growth factor I (yIGF-I) was determined using a combination of Staphylococcus aureus V8 protease mapping, fast-atom-bombardment mass spectrometry as well as amino acid sequence and composition analysis. Three disulfide bridges were found between the following cysteine residues: Cys6-Cys48, Cys47-Cys52 and Cys18-Cys61. IGF-I isolated from human plasma (pIGF-I) was found to have an identical disulfide configuration. A yeast-derived isomeric form of IGF-I (yisoIGF-I) exhibited an altered disulfide arrangement: Cys6-Cys47, Cys48-Cys52 and Cys18-Cys61. Radioreceptor analysis of pIGF-I and yIGF-I showed high specific activity, 20,000 U/mg. However, yisoIGF-I demonstrated a severely reduced ability to bind to the IGF-I receptor (19%) and was less potent in provoking a mitogenic response in Balb/C 3T3 fibroblasts (50% at doses 10-100 ng/ml). The data demonstrate the importance of correct disulfide arrangement in IGF-I for full biological activity.     

Role of disulphide bonds in a thermophilic serine protease aqualysin I from Thermus aquaticus YT-1

A thermophilic serine protease, Aqualysin I, from Thermus aquaticus YT-1 has two disulphide bonds, which are also found in a psychrophilic serine protease from Vibrio sp. PA-44 and a proteinase K-like enzyme from Serratia sp. at corresponding positions. To understand the significance of these disulphide bonds in aqualysin I, we prepared mutants C99S, C194S and C99S/C194S (WSS), in which Cys69-Cys99, Cys163-Cys194 and both of these disulphide bonds, respectively, were disrupted by replacing Cys residues with Ser residues. All mutants were expressed stably in Escherichia coli. The C99S mutant was 68% as active as the wild-type enzyme at 40 degrees C in terms of k(cat) value, while C194S and WSS were only 6 and 3%, respectively, as active, indicating that disulphide bond Cys163-Cys194 is critically important for maintaining proper catalytic site conformation. Mutants C194S and WSS were less thermostable than wild-type enzyme, with a half-life at 90 degrees C of 10 min as compared to 45 min of the latter and with transition temperatures on differential scanning calorimetry of 86.7 degrees C and 86.9 degrees C, respectively. Mutant C99S was almost as stable as the wild-type aqualysin I. These results indicate that the disulphide bond Cys163-Cys194 is more important for catalytic activity and conformational stability of aqualysin I than Cys67-Cys99.     

Selectivity of tryptophan residues in mediating photolysis of disulfide bridges in goat alpha-lactalbumin

Goat alpha-lactalbumin (GLA) contains four tryptophan (Trp) residues and four disulfide bonds. Illumination with near-UV light results in the cleavage of disulfide bridges and in the formation of free thiols. To obtain information about the reaction products, the illuminated protein was carbamidomethylated and digested with trypsin and the peptides were analyzed by mass spectrometry. Peptides containing Cys120Cam, Cys61Cam, or Cys91Cam were detected, as well as two peptides containing a new Cys-Lys cross-link. In one, Cys6 was cross-linked to Lys122, while the cross-link in the second was either a Cys91-Lys79 or Cys73-Lys93 cross-link; however, the exact linkage could not be defined. The results demonstrate photolytic cleavage of the Cys6-Cys120, Cys61-Cys77, and Cys73-Cys91 disulfide bonds. While photolysis of Cys6-Cys120 and Cys73-Cys91 disulfide bonds in GLA has been reported, cleavage of the Cys61-Cys77 disulfide bonds has not been previously detected. To examine the contribution of the individual Trp residues, we constructed the GLA mutants, W26F, W60F, W104F, and W118F, by replacing single Trp residues with phenylalanine (Phe). The substitution of each Trp residue led to less thiol production compared to that for wild-type GLA, showing that each Trp residue in GLA contributed to the photolytic cleavage of disulfide bridges. The specificity was expressed by the nature of the reaction products. No cleavage of the Cys6-Cys120 disulfide bridge was detected when the W26F mutant was illuminated, and no cleavage of the Cys73-Cys91 disulfide bridge was seen following illumination of W26F or W104F. In contrast, Cys61Cam, resulting from the cleavage of the Cys61-Cys77 disulfide bridge, was found following illumination of any of the mutants.     

Disulfide bond structure and N-glycosylation sites of the extracellular domain of the human interleukin-6 receptor

The high affinity interleukin-6 (IL-6) receptor is a hexameric complex consisting of two molecules each of IL-6, IL-6 receptor (IL-6R), and the high affinity converter and signaling molecule, gp130. The extracellular "soluble" part of the IL-6R (sIL-6R) consists of three domains: an amino-terminal Ig-like domain and two fibronectin-type III (FN III) domains. The two FN III domains comprise the cytokine-binding domain defined by a set of 4 conserved cysteine residues and a WSXWS sequence motif. Here, we have determined the disulfide structure of the human sIL-6R by peptide mapping in the absence and presence of reducing agent. Mass spectrometric analysis of these peptides revealed four disulfide bonds and two free cysteines. The disulfides Cys102-Cys113 and Cys146-Cys157 are consistent with known cytokine-binding domain motifs, and Cys28-Cys77 with known Ig superfamily domains. An unusual cysteine connectivity between Cys6-Cys174, which links the Ig-like and NH2-terminal FN III domains causing them to fold back onto each other, has not previously been observed among cytokine receptors. The two free cysteines (Cys192 and Cys258) were detected as cysteinyl-cysteines, although a small proportion of Cys258 was reactive with the alkylating agent 4-vinylpyridine. Of the four potential N-glycosylation sites, carbohydrate moieties were identified on Asn36, Asn74, and Asn202, but not on Asn226.