Enantioselective lipase-catalyzed kinetic resolution of N-(2-ethyl-6-methylphenyl)alanine

The enzyme (BSL2), a highly active lipase expressed from newly constructed strain of Bacillus subtilis BSL2, is used in the kinetic resolution of N-(2-ethyl-6-methylphenyl)alanine from the corresponding racemic methyl ester. Reaction conditions are optimized to enhance the enantioselectivity. The effects of various racemic alkyl esters, substrate concentration, operating temperature, pH of the aqueous medium and organic solvents on activity and enantioselectivity of BSL2 for kinetic resolution are also studied. A high enantiomeric ratio (E = 60.7) is reached in diisopropyl ether/water (10%, v/v) and the enantioselectivity is about 22-fold higher than that in pure buffered aqueous solution. The results show that the reaction medium greatly influences BSL2 reaction and its enantioselectivity in the hydrolysis of racemic methyl ester.     

Influence of water activity on the enantioselective esterification of (R,S)-ibuprofen by Candida antarctica lipase B in solventless media

The lipase-catalyzed enantioselective esterification of ibuprofen has been studied in a media, composed only of substrates. When racemic ibuprofen is used, the alcohol-chain length affects the esterification rates of individual enantiomers, but it does not affect the enantioselectivity. Water activity affects the esterification rates of (R)- and (S)-ibuprofen differently, leading to higher enantioselectivity at lower water activities. Experiments were also conducted at various (R)- to (S)-ibuprofen ratios. It appears that the esterification rate of (R)-ibuprofen is always proportional to its concentration, whereas at low water activity the esterification rate of (S)-ibuprofen shows a saturation at higher concentrations. Other 2-phenyl carboxylic acids were studied, and the increase in apparent enantioselectivity at low-water activity was not observed for the molecules tested.     

Kinetic resolution of rac-2-pentanol catalyzed by Candida antarctica lipase B in the ionic liquid, 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide

The ionic liquid, l-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]amide ([Bmim] [NTf2]), was used as a reaction medium for the kinetic resolution of rac-2-pentanol catalyzed by free Candida antarctica lipase B, using vinyl propionate at 2% (v/v) water content. The synthetic activity of lipase in [Bmim] [NTf2] was up 2.5-times greater than in hexane, and showed high enantioselectivity (ee > 99.99%). The optimal temperature and pH were 60 degrees C and 7, respectively. A decrease in water activity (aw) produced a decay in synthetic activity, and an exponential increase in selectivity.     

Understanding structure-stability relationships of Candida antartica lipase B in ionic liquids

Two different water-immiscible ionic liquids (ILs), 1-ethyl-3-methylimidizolium bis(trifluoromethylsulfonyl)imide and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide, were used for butyl butyrate synthesis from vinyl butyrate catalyzed by Candida antarctica lipase B (CALB) at 2% (v/v) water content and 50 degrees C. Both the synthetic activity and stability of the enzyme in these ILs were enhanced as compared to those in hexane. Circular dichroism and intrinsic fluorescence spectroscopic techniques have been used over a period of 4 days to determine structural changes in the enzyme associated with differences in its stability for each assayed medium. CALB showed a loss in residual activity higher than 75% after 4 days of incubation in both water and hexane media at 50 degrees C, being related to great changes in both alpha-helix and beta-strand secondary structures. The stabilization of CALB, which was observed in the two ILs studied, was associated with both the maintenance of the 50% of initial alpha-helix content and the enhancement of beta-strands. Furthermore, intrinsic fluorescence studies clearly showed how a classical enzyme unfolding was occurring with time in both water and hexane media. However, the structural changes associated with the incubation of the enzyme in both ILs might be attributed to a compact and active enzyme conformation, resulting in an enhancement of the stability in these nonaqueous environments.     

Effects of ethanol and other alkanols on the kinetics and the activation parameters of thermal death in Saccharomyces cerevisiae

Ethanol, isopropanol, propanol, and butanol enhanced thermal death in Saccharomyces cerevisiae by increasing DeltaSdouble dagger, the entropy of activation of thermal death while DeltaHdouble dagger, the enthalpy of activation, was not significantly affected. The relation between DeltaSdouble dagger and alkanol concentration was linear with a different slope for each alkanol: DeltaS(double dagger) (X) = DeltaS(double dagger) (0) + C(A) (E)X, where X is the alkanol concentration and C(A) (E) the entropy coefficient for the aqueous phase defined as increase in entropy of activation per unit concentrations of the alkanol. C(A) (E) was correlated with the lipid-buffer partition coefficients of the alkanols while C(M) (E), the entropy coefficient for the lipid phase, was nearly identical for the four alkanol and averaged 37.6 entropy units per mole of alkanol per kilogram of membrane. As predicted by these results, the specific death rates (K(d)) at constant temperature were an exponential function of the alkanol concentration and behaved in agreement with the following equation: In K(X) (d) = In K(0) (d) + (C(A) (E)/R)X, where R is the gas constant. It was concluded that the alkanols enhanced thermal death through nonspecific action on membrane structure.     

Influence of solvent and water activity on kinetically controlled peptide synthesis.

alpha-Chymotrypsin deposited on Celite was used to catalyse peptide synthesis reactions between N-protected amino acid esters and leucine amide in organic media with low water content. The influence of the solvent and the thermodynamic water activity on the reaction kinetics was studied. The substrate specificity in the reactions was shown to be a combination of the substrate specificity of the enzyme in aqueous media and the influence of the solvents. The magnitude of the solvent effects differed greatly depending on the substrates used. In hydrophobic solvents high reaction rates were observed and the competing hydrolysis of the ester substrate occurred to only a minor extent. Reactions occurred at water activities as low as 0.11, but the rate constants increased with increasing water activity and were about two orders of magnitude higher at the highest water activity tested (0.97).     

Enantioselective esterification of glycidol by surfactant-lipase complexes in organic media

Enantioselective esterification of glycidol has been performed with lauric acid in organic media dosed with surfactant-lipase complexes as catalysts. Lipase derived from various biomaterial sources was complexed with nonionic surfactant, dioleyl-N-D-glucono-L-glutamate, prior to use. Surfactant-lipase D (from Rhizopus delemar) complex had a higher enantioselectivity (v R /v S = 7.6) than the other lipases and the corresponding initial reaction rate was averaging 100-fold better than that of native powder lipase D in cyclohexane at 35°C.     

Effects of solvent, water activity and temperature on lipase and hydroxynitrile lyase enantioselectivity

The influence of the reaction conditions on the enantioselectivity of reactions catalysed by lipases or hydroxynitrile lyases (HNLs) in organic solvents was investigated. The lipases catalysed kinetic resolution of chiral secondary alcohols or chiral carboxylic acids and the HNLs catalysed asymmetric addition of hydrogen cyanide to aldehydes.

The temperature effects on enantioselectivity were studied in detail. From measurements of the enantiomeric ratio (E) at different temperatures the activation parameters ΔΔH^# and ΔΔS^# were determined. In the lipase-catalysed reactions the enthalpic and entropic effects on E always counteracted, while in a few of the HNL-catalysed reactions, ΔΔH^# and ΔΔS^# had opposite signs and therefore the effects cooperated to give high E values (−RTlnE = ΔΔG^# = ΔΔH^# − TΔΔS^#). In all the HNL-catalysed reactions and most of the lipase-catalysed ones, the enantioselectivity increased with decreasing reaction temperature. However, in one of the lipase-catalysed reactions, the enantioselectivity decreased with decreasing temperature. The theoretical background of these observations was discussed.

In the HNL-catalysed reactions, the enantioselectivity increased with increasing water content up to water saturation, while in the lipase-catalysed reactions the opposite trend was found in one case and in the others no significant effect was observed. Solvent mixtures of diisopropylether and hexane were used to obtain solvents with different log P values. The log P value of the solvent did not influence the enantioselectivity in the HNL-catalysed reactions, while the enantioselectivity increased with increasing log P value in two of the lipase-catalysed reactions. The reaction temperature was shown to be a very useful way to influence enzyme selectivity and the effects obtained could be rationalised. The influence of the reaction medium (solvent and water activity) is much more difficult to rationalise and predict.     

Initial water content and lipase-mediated ester formation in hexane

Lipase biocatalysis was investigated as a tool for the production of esters by two model reactions, esterification of 1-butanol with 2-methyl-1-pentanoic acid and irreversible transesterification between 2-methyl-1-pentanol and vinyl acetate. The reactions were carried out in hexane using lipases from Candida cylindracea and porcine pancreas. The initial water content influenced both the yield of the ester and the enantioselectivity of the reaction (esterifica-tions) or the ester formation only (transesterifications).     

Optimizing lipase activity, enantioselectivity, and stability with medium engineering and immobilization for beta-blocker synthesis.

Lipase from Pseudomonas cepacia showed poor activity and moderate enantioselectivity (E) in pure aqueous systems for hydrolysis of a racemic mixture (+/-)-1-chloro-2-acetoxy-3-(1-naphthyloxy)-propane, which is a potential intermediate for beta-blocker synthesis. However, addition of polar organic solvents to the reaction can change both the activity and the enantioselectivity for this chiral reaction significantly. It was observed, in general, that the activity increases and the enantioselectivity decreases with the increase in the polarity of the organic solvent added to the medium. Among the six solvents chosen (i.e., dimethylsulfoxide [DMSO], 1, 4-dioxane, dimethylformamide [DMF], acetone, 1-propanol, and tetrahydrofuran [THF]), maximum activity and minimum enantioselectivity was obtained with DMSO, whereas minimum activity and maximum enantioselectivity was obtained with THF as the cosolvents. In the subsequent studies, native or polyethylene glycol (PEG)-modified lipase was immobilized by entrapping in Caalginate gel beads. In a fixed-bed continuous reactor containing these catalyst beads, the enzyme was found to be at least three times more enantioselective than the native form in a batch reactor. This fixed-bed reactor with the beads could be operated with high concentration of acetone (33% v/v) for about 1 month without a significant loss of enzyme activity and enantioselectivity.     

A Facile Method for Preparation of Polymerizable, Optically Active Ketoprofen Prodrug by Irreversible Lipase-catalysed Resolution

Summary An irreversible resolution of ketoprofen prodrug was developed by lipase-catalysed hydrolysis using corresponding vinyl ester as activated substrate in organic medium. The product obtained, (S)-ketoprofen vinyl ester would be used as a potential prodrug and a significant monomer for polymeric drug. Lipozyme^? immobilized from Mucor miehei showed the highest selectivity and activity after enzyme screening. The effect of solvent, water amount in the reaction medium and reaction temperature on the activity and enantioselectivity of Lipozyme^? was studied. Polymerizable, optically active ketoprofen prodrug could be obtained with excellent enantioselectivity (ee >99%, E ~ 400) in a mixture of dioxane/water (97.5/2.5, v/v) at 25 °C.     

Events Occurring Near the Time of Synapsis During Transformation in Diplococcus pneumoniae

A marker-specific and strongly temperature-dependent reaction was observed to occur at a time during transformation in Diplococcus pneumoniae after the donor deoxyribonucleic acid (DNA) had acquired single-strand properties and immediately preceding the integration of these strands into the recipient chromosome. Operationally, it was observed as the prevention of an intracellular inactivation process, also described in this paper, which is specific for low molecular weight or for damaged DNA, and which occurs if the recipient cells are held at suboptimal temperatures after the DNA has entered. Brief exposure of the cells to a higher temperature stabilized the DNA against this inactivation, in a two step process. It is the first step which has a strong temperature dependence (DeltaHdouble dagger = 70 kcal/mole, DeltaSdouble dagger = 160 entropy units), is marker specific, and which appears to be reversible. The second step is much less temperature-dependent and overlaps in time the start of integration. The enthalpy and entropy of activation are both consistent with those needed to open a loop of six to eight base pairs in a DNA duplex. It is suggested that these observations may reflect, and provide an assay for, the kinetics of synapsis, which on this model is limited in rate by the appearance of unpaired regions on the recipient duplex.     

Environmentally friendly, efficient resolution of racemic secondary alcohols by lipase-catalyzed enantioselective transesterification in ionic liquids in the presence of organic bases

The lipase-catalyzed enantioselective transesterification of racemic secondary alcohols was studied using vinyl acetate as acyl donor in two imidazolium-based ionic liquids vs. hexane (Scheme), both in the absence and presence of catalytic amounts of organic bases such as triethylamine (Et(3)N) or pyridine. The organic bases generally enhanced both the rate and enantioselectivity of the reaction. Further, the system 1-butyl-3-methyl-1H-imidazolium hexafluorophosphate/Candida antarctica lipase B ([bmim][PF(6)]/CALB) could be readily recycled four times without significant loss in activity or enantioselectivity.     

Effect of organic solvents on enantioselectivity of protease catalysis

The protease-catalyzed transesterifications between N-trifluoroacetyl-DL-phenylalanine 2,2,2-trifluoroethyl ester and 1-propanol were studied in a variety of anhydrous organic solvents at 30 degrees C. The protease preparations lyophilized from phosphate buffer solutions (pH 8.0) were used as catalysts. The organic solvent affected both rate of reaction and enantioselectivity differently. Proteases such as Aspergillus oryzae protease, subtilisin Carlsberg, and subtilisin BPN' always preferred the L-enantiomer in both hydrophilic and hydrophobic solvents, indicating no inversion of the L-specificity in hydrophobic solvents such as toluene. However, enantioselectivity was rather poor, with E (enantiomeric ratio) values not exceeding even one order of magnitude except for acetonitrile. There was a weak inverse correlation between E values of subtilisin Carlsberg and solvent hydrophobicity (logP). Acetonitrile was a preferable solvent in terms of both rate of reaction and enantioselectivity (E= 15 to 25) for processing L-amino acid derivatives in organic media. Organic solvents generally have potential advantages of processing D-amino acid derivatives. (c) 1997 John Wiley & Sons, Inc.     

Efficient kinetic resolution of (R,S)-1-trimethylsilylethanol via lipase-mediated enantioselective acylation in ionic liquids

Efficient enantioselective acylation of (R,S)-1-trimethylsilylethanol {(R,S)-1-TMSE} with vinyl acetate catalyzed by immobilized lipase from Candida antarctica B (i.e., Novozym 435) was successfully conducted in ionic liquids (ILs). A remarkable enhancement in the initial rate and the enantioselectivity of the acylation was observed by using ILs as the reaction media when compared to the organic solvents tested. Also, the activity, enantioselectivity, and thermostability of Novozym 435 increased with increasing hydrophobicity of ILs. Of the six ILs examined, the IL C4MIm.PF6 gave the fastest initial rate and the highest enantioselectivity, and was consequently chosen as the favorable medium for the reaction. The optimal molar ratio of vinyl acetate to (R,S)-1-TMSE, water activity, and reaction temperature range were 4:1, 0.75, and 40 -50 degrees C, respectively, under which the initial rate and the enantioselectivity (E value) were 27.6 mM/h and 149, respectively. After a reaction time of 6 h, the ee of the remaining (S)-1-TMSE reached 97.1% at the substrate conversion of 50.7%. Additionally, Novozym 435 was effectively recycled and reused in C4MIm.PF6 for five consecutive runs without substantial lose in activity and enantioselectivity. The preparative scale kinetic resolution of (R,S)-1-TMSE in C4MIm.PF6 is shown to be very promising and useful for the industrial production of enantiopure (S)-1-TMSE.     

Over-stabilization of Candida antarctica lipase B by ionic liquids in ester synthesis

Four different ionic liquids, based on dialkylimidazolium cations associated with perfluorinated and bis(trifluoromethyl)sulfonyl amide anions were used as reaction media for butyl butyrate synthesis catalyzed by free Candida antarctica lipase B at 2% (v/v) water content and 50 °C. Lipase had enhanced synthetic activity in all ionic liquids in comparison with two organic solvents (hexane, and 1-butanol), the enhanced activity being related to the increase in polarity of ionic liquids. The continuous operation of lipase with all the assayed ionic liquids showed over-stabilization of the enzyme. The reuse of free lipase in 1-butyl-3-methylimidazolium hexafluorophosphate in continuous operation cycles showed a half-life time 2300 times greater than that observed when the enzyme was incubated in the absence of substrate (3.2 h), and a selectivity higher than 90%.     

Lipase catalyzed esterification of glycidol in organic solvents

We studied the resolution of racemic glycidol through esterification with butyric acid catalyzed by porcine pancreatic lipase in organic media. A screening of seven solvents (log P values between 0.49 and 3.0, P being the n-octanol-water partition coefficient of the solvent) showed that neither log P nor the logarithm of the molar solubility of water in the solvent provides good correlations between enantioselectivity and the properties of the organic media. Chloroform was one of the best solvents as regards the enantiomeric purity (e. p.) of the ester produced. In this solvent, the optimum temperature for the reaction was determined to be 35 degrees C. The enzyme exhibited maximum activity at a water content of 13 +/- 2% (w/w). The enantiomeric purity obtained was 83 +/- 2% of (S)-glycidyl butyrate and did not depend on the alcohol concentration or the enzyme water content for values of these parameters up to 200 mM and 25% (w/w), respectively. The reaction was found to follow a BiBi mechanism. (c) 1993 John Wiley & Sons, Inc.     

Real time measurement and control of thermodynamic water activities for enzymatic catalysis in hexane

The esterification reaction of geraniol with acetic acid catalyzed by immobilized Candida antarctica lipase B was studied in hexane using a pervaporation-assisted batch reactor. The effect of thermodynamic water activity (a(w)) on the initial reaction rate was investigated at a(w) ranging from 0.02 to 1.0. The a(w) was monitored on-line in real time. a(w) was actively controlled throughout the reaction by using highly water-selective membrane pervaporation. This novel combination of a(w) sensing and control eliminates changes in a(w) during the reaction even in the initial phase of relatively rapid water release during an esterification. No chemicals are introduced for a(w) control, and no purge gases or liquids are needed. A maximum in the initial reaction rate was found approximately at a(w)=0.1. The initial reaction rate declined quickly at higher a(w), and dropped precipitously at lower a(w).     

Influence of water-miscible organic solvents on kinetics and enantioselectivity of the (R)-specific alcohol dehydrogenase from Lactobacillus brevis

Using the organic solvents acetonitrile and 1,4-dioxane as water-miscible additives for the alcohol dehydrogenase (ADH)-catalyzed reduction of butan-2-one, we investigated the influence of the solvents on enzyme reaction behavior and enantioselectivity. The NADP(+)-dependent (R)-selective ADH from Lactobacillus brevis (ADH-LB) was chosen as biocatalyst. For cofactor regeneration, the substrate-coupled approach using propan-2-ol as co-substrate was applied. Acetonitrile and 1,4-dioxane were tested from mole fraction 0.015 up to 0.1. Initial rate experiments revealed a complex kinetic behavior with enzyme activation caused by the substrate butan-2-one, and increasing K(M) values with increasing solvent concentration. Furthermore, these experiments showed an enhancement of the enantioselectivity for (R)-butan-2-ol from 37% enantiomeric excess (ee) in pure phosphate buffer up to 43% ee in the presence of 0.1 mol fraction acetonitrile. Finally, the influence of the co-solvents on water activity of the reaction mixture and on enzyme stability was investigated.     

Activation of serine protease subtilisin Carlsberg in organic solvents: combined effect of methyl-β-cyclodextrin and water

Methyl -cyclodextrin (MCD) increased the activity and enantioselectivity of lyophilized subtilisin suspended in dry THF and acetonitrile in two transesterification model reactions. These beneficial improvements were diminished by the addition of water, in contrast to the observation that water activates subtilisin lyophilized from buffer alone. For example, the initial rate for the S enantiomer in the transesterification of vinylbutyrate with (±)-1-phenylethanol (sec-phenethylalcohol) decreased ca. 4-fold and the enantioselectivity from 59 to 40 when 0.1% (v/v) of water was added to THF.