Role of the Cys 2-Cys 10 disulfide bond for the structure, stability, and folding kinetics of ribonuclease T1.

The Cys 2-Cys 10 disulfide bond in ribonuclease T1 was broken by substituting Cys 2 and Cys 10 by Ser and Asn, respectively, as present in ribonuclease F1. This C2S/C10N variant resembles the wild-type protein in structure and in catalytic activity. Minor structural changes were observed by 2-dimensional NMR in the local environment of the substituted amino acids only. The thermodynamic stability of ribonuclease T1 is strongly reduced by breaking the Cys 2-Cys 10 bond, and the free energy of denaturation is decreased by about 10 kJ/mol. The folding mechanism is not affected, and the trans to cis isomerizations of Pro 39 and Pro 55 are still the rate-limiting steps of the folding process. The differences in the time courses of unfolding and refolding are correlated with the decrease in stability: the folding kinetics of the wild-type protein and the C2S/C10N variant become indistinguishable when they are compared under conditions of identical stability. Apparently, the Cys 2-Cys 10 disulfide bond is important for the stability but not for the folding mechanism of ribonuclease T1. The breaking of this bond has the same effect on stability and folding kinetics as adding 1 M guanidinium chloride to the wild-type protein.     

Role of a disulfide cross-link in the conformational stability of a thermostable xylanase

The role of a S-S cross-link in the conformational stability of xylanase fromHumicola lanuginosa has been investigated using CD, UV absorption spectroscopy, and RIA displacement studies. Our studies show that reduction and carboxymethylation of the S-S cross-link in xylanase results in a gross conformational perturbation of the protein. The secondary structure analysis of the CD spectra indicates that the xylanase with an intact S-S contains 66% -sheet structure and remaining random coil. Cleavage of the S-S bond results in a loss of 25% -sheet structure. Thermal denaturation studies using CD spectroscopy andpH-dependent tyrosine ionization studies using UV spectroscopy show that the presence of disulfide cross-link offers resistance against unfolding by extremes of temperature andpH. Further, we demonstrate that the heat-induced changes in xylanase with intact S-S bond are almost totally reversible, while those in the S-S cleaved enzyme fail to show any significant reversal. Our studies support the present theory that S-S cross-links exert their stabilizing effect in proteins by destabilizing the unfolded state of the protein and forcing it back to a more folded state.     

Opsin stability and folding: the role of Cys185 and abnormal disulfide bond formation in the intradiscal domain

The structure in the extracellular, intradiscal domain of rhodopsin surrounding the Cys110–Cys187 disulfide bond has been shown to be important for correct folding of this receptor in vivo. Retinitis pigmentosa misfolding mutants of the apoprotein opsin (such as P23H) misfold, as defined by a deficiency in ability to bind 11-cis retinal and form rhodopsin. These mutants also possess an abnormal Cys185–Cys187 disulfide bond in the intradiscal domain. Here, by mutating Cys185 to alanine, we eliminate the possibility of forming this abnormal disulfide bond and investigate the effect of combining the C185A mutation with the retinitis pigmentosa mutation P23H. Both the P23H and P23H/C185A double mutant suffer from low expression and poor 11-cis retinal binding. Our data suggest that misfolding events occur that do not have an absolute requirement for abnormal Cys185–Cys187 disulfide bond formation. In the detergent-solubilised, purified state, the C185A mutation allows formation of rhodopsin at wild-type (WT) levels, but has interesting effects on protein stability. C185A rhodopsin is less thermally stable than WT, whereas C185A opsin shows the same ability to regenerate rhodopsin in detergent as WT. Purified C185A and WT opsins, however, have contrasting 11-cis retinal binding kinetics. A high proportion of C185A opsin binds 11-cis retinal with a slow rate that reflects a denatured state of opsin reverting to a fast-binding, open-pocket conformation. This slower rate is not observed in a stabilising lipid/detergent system, 1,2-dimyristoyl-sn-glycero-3-phosphocholine/Chaps, in which C185A exhibits WT (fast) retinal binding. We propose that the C185A mutation destabilises the open-pocket conformation of opsin in detergent resulting in an equilibrium between correctly folded and denatured states of the protein. This equilibrium can be driven towards the correctly folded rhodopsin state by the binding of 11-cis retinal.     

Discovery of an intermolecular disulfide bond required for the thermostability of a heterodimeric protein from the thermophile Hydrogenobacter thermophilus

Factors that increase protein thermostability are of considerable interest in both scientific and industrial fields. Disulfide bonds are one of such factors that increase thermostability, but are rarely found in intracellular proteins because of the reducing environment of the cytosol. Here, we report the first example of an intermolecular disulfide bond between heteromeric subunits of a novel-type phosphoserine phosphatase from a thermophilic bacterium Hydrogenobacter thermophilus, which contributes to the protein thermostability at the physiological temperature. Comparison of remaining soluble proteins between wild-type and cysteine-deleted mutant using SDS-PAGE revealed that the disulfide bond increases the thermostability of the whole protein by tightly connecting a subunit with low solubility to the partner with higher solubility. Furthermore, it was strongly suggested that the disulfide bond is formed and contributes to the stability in vivo. This finding will open new avenues for the design of proteins with increased thermostability.     

Effect of disulfide bond on the conformation and anticoagulant activity of an Arg-Gly-Asp motif displayed on a mutant insulin protein framework

Summary Protein engineering techniques were employed to graft the known anticoagulant Arg-Gly-Asp (RGD) motifcontaining sequences onto the surface of a mutant, inactive insulin framework. To probe the effect of a disulfide bond on the resultant anticoagulant activity, a native RGD-containing sequence from disintegrin dendroaspin, CFTPRGDMPGPYC, as well as a modified sequence, SFTPRGDMPGPYS were each examined. The peptide was placed between the C-terminal of the B chain and the N-terminal of the A chain and connected with B27 and A1 residues of the inactive insulin that lacks the characteristic intramolecular A6–11 disulfide bond within the A chain. The two RGD-containing insulin genes were over-expressed inE. coli, and purified and designated as RGD-Cys-Ins and RGD-Ser-Ins, respectively. Their amino acid compositions and mass data were in good agreement with those of expected. The RGD-Cys-Ins showed inhibition of platelet aggregation with an IC₅₀ of 3 μM, while the latter was 3.5-fold less active. Thein vivo assay also indicated that the RGD-Cys-Ins had a higher activity in prolonging the bleeding time in mice than RGD-Ser-Ins. Both RGD-Cys-Ins and RGD-Ser-Ins retained about 25% of the proinsulin immunoactivity and had almost no insulin receptor binding activity. The results indicate the necessity for the RGD motif to be conformationally constrained for it to elicit a greater anticoagulant activity.     

Additional disulfide bonds in insulin: Prediction,recombinant expression,receptor binding affinity,and stability

The structure of insulin, a glucose homeostasis-controlling hormone, is highly conserved in all vertebrates and stabilized by three disulfide bonds. Recently, we designed a novel insulin analogue containing a fourth disulfide bond located between positions A10-B4. The N-terminus of insulin''s B-chain is flexible and can adapt multiple conformations. We examined how well disulfide bond predictions algorithms could identify disulfide bonds in this region of insulin. In order to identify stable insulin analogues with additional disulfide bonds, which could be expressed, the C_β cut-off distance had to be increased in many instances and single X-ray structures as well as structures from MD simulations had to be used. The analogues that were identified by the algorithm without extensive adjustments of the prediction parameters were more thermally stable as assessed by DSC and CD and expressed in higher yields in comparison to analogues with additional disulfide bonds that were more difficult to predict. In contrast, addition of the fourth disulfide bond rendered all analogues resistant to fibrillation under stress conditions and all stable analogues bound to the insulin receptor with picomolar affinities. Thus activity and fibrillation propensity did not correlate with the results from the prediction algorithm.     

Effect of disulfide bond on the conformation and anticoagulant activity of an Arg-Gly-Asp motif displayed on a mutant insulin protein framework

Protein engineering techniques were employed to graft the known anticoagulant Arg-Gly-Asp (RGD) motif-containing sequences onto the surface of a mutant, inactive insulin framework. To probe the effect of a disulfide bond on the resultant anticoagulant activity, a native RGD-containing sequence from disintegrin dendroaspin, CFTPRGDMPGPYC, as well as a modified sequence, SFTPRGDMPGPYS, were each examined. The peptide was placed between the C-terminal of the B chain and the N-terminal of the A chainand connected with B27 and A1 residues of the inactive insulin that lacks the characteristic intramolecular A6-11 disulfide bondwithin the A chain. The two RGD-containing insulin genes were over-expressed in E. coli, and purified and designatedas RGD-Cys-Ins and RGD-Ser-Ins, respectively. Their amino acid compositions and mass data were in good agreement with those ofexpected. The RGD-Cys-Ins showed inhibition of platelet aggregation with an IC₅₀ of 3 M, while the latter was3.5-fold less active. The in vivo assay also indicatedthat the RGD-Cys-Ins had a higher activity in prolonging the bleeding time in mice than RGD-Ser-Ins. Both RGD-Cys-Ins and RGD-Ser-Ins retained about 25% of the proinsulin immunoactivity and had almost no insulin receptor binding activity. The results indicate the necessity for the RGD motif to be conformationally constrained for it to elicit a greater anticoagulant activity.     

Molecular dynamics simulation to investigate the impact of disulfide bond formation on conformational stability of chicken cystatin I66Q mutant

Chicken cystatin (cC) mutant I66Q is located in the hydrophobic core of the protein and increases the propensity for amyloid formation. Here, we demonstrate that under physiological conditions, the replacement of Ile with the Gln in the I66Q mutant increases the susceptibility for the disulfide bond Cys71–Cys81 to be reduced when compared to the wild type (WT) cC. Molecular dynamics (MD) simulations under conditions favoring cC amyloid fibril formation are in agreement with the experimental results. MD simulations were also performed to investigate the impact of disrupting the Cys71–Cys81 disulfide bond on the conformational stability of cC at the atomic level, and highlighted major disruption to the cC appendant structure. Domain swapping and extensive unfolding has been proposed as one of the possible mechanisms initiating amyloid fibril formation by cystatin. Our in silico studies suggest that disulfide bond formation between residues Cys95 and Cys115 is necessary to maintain conformational stability of the I66Q mutant following breakage of the Cys71–Cys81 disulfide bridge. Subsequent breakage of disulfide bond Cys95–Cys115 resulted in large structural destabilization of the I66Q mutant, which increased the α–β interface distance and expanded the hydrophobic core. These experimental and computational studies provide molecular-level insight into the relationship between disulfide bond formation and progressive unfolding of amyloidogenic cC mutant I66Q.

An animated Interactive 3D Complement (I3DC) is available in Proteopedia at http://proteopedia.org/w/Journal:JBSD:23     

The role of disulfide bond isomerase A (DsbA) of Escherichia coli O157:H7 in biofilm formation and virulence

The role of periplasmic disulfide oxidoreductase DsbA in Shiga toxin-producing Escherichia coli O157:H7 (STEC) was investigated. Deletion of dsbA (DeltadsbA) significantly decreased cell motility and alkaline phosphatase activity in STEC. STEC DeltadsbA also showed greater sensitivity to menadione and under low pH conditions. Significant reductions in surface attachment to both biotic (HT-29 epithelial cells) and abiotic (polystyrene and polyvinyl chloride) surfaces were observed in STEC DeltadsbA. In addition, no biofilm formation was detected in STEC DeltadsbA compared to wild-type cells in glass capillary tubes under continuous flow-culture system conditions. In the nematode model Caenorhabditis elegans-killing assay, the deletion of dsbA in STEC resulted in attenuated virulence compared to wild-type cells. STEC DeltadsbA was also found to have a reduced ability to colonize the nematode gut. These results suggest that DsbA plays important roles in biofilm formation and virulence in STEC cells.     

Contributions of a disulfide bond to the structure, stability, and dimerization of human IgG1 antibody CH3 domain

Recombinant human monoclonal antibodies have become important protein-based therapeutics for the treatment of various diseases. The antibody structure is complex, consisting of beta-sheet rich domains stabilized by multiple disulfide bridges. The dimerization of the C(H)3 domain in the constant region of the heavy chain plays a pivotal role in the assembly of an antibody. This domain contains a single buried, highly conserved disulfide bond. This disulfide bond was not required for dimerization, since a recombinant human C(H)3 domain, even in the reduced state, existed as a dimer. Spectroscopic analyses showed that the secondary and tertiary structures of reduced and oxidized C(H)3 dimer were similar, but differences were observed. The reduced C(H)3 dimer was less stable than the oxidized form to denaturation by guanidinium chloride (GdmCl), pH, or heat. Equilibrium sedimentation revealed that the reduced dimer dissociated at lower GdmCl concentration than the oxidized form. This implies that the disulfide bond shifts the monomer-dimer equilibrium. Interestingly, the dimer-monomer dissociation transition occurred at lower GdmCl concentration than the unfolding transition. Thus, disulfide bond formation in the human C(H)3 domain is important for stability and dimerization. Here we show the importance of the role played by the disulfide bond and how it affects the stability and monomer-dimer equilibrium of the human C(H)3 domain. Hence, these results may have implications for the stability of the intact antibody.     

Evaluating the stability of disulfide bridges in proteins: a torsional potential energy surface for diethyl disulfide

Disulfide bonds formed by the oxidation of cysteine residues in proteins are the major form of intra- and inter-molecular covalent linkages in the polypeptide chain. To better understand the conformational energetics of this linkage, we have used the MP2(full)/6-31G(d) method to generate a full potential energy surface (PES) for the torsion of the model compound diethyl disulfide (DEDS) around its three critical dihedral angles (χ₂, χ₃, χ₂′). The use of ten degree increments for each of the parameters resulted in a continuous, fine-grained surface. This allowed us to accurately predict the relative stabilities of disulfide bonds in high resolution structures from the Protein Data Bank. The MP2(full) surface showed significant qualitative differences from the PES calculated using the Amber force field. In particular, a different ordering was seen for the relative energies of the local minima. Thus, Amber energies are not reliable for comparison of the relative stabilities of disulfide bonds. Surprisingly, the surface did not show a minimum associated with χ₂～ ? 60°, χ₃～90, χ₂′～ ? 60°. This is due to steric interference between Hα atoms. Despite this, significant populations of disulfides were found to adopt this conformation. In most cases this conformation is associated with an unusual secondary structure motif, the cross-strand disulfide. The relative instability of cross-strand disulfides is of great interest, as they have the potential to act as functional switches in redox processes.     

Fluorescence and Fourier-transform infrared spectroscopic studies on the role of disulfide bond in the calcium binding in the 33 kDa protein of Photosystem II

The 33 kDa protein of Photosystem II has one intrachain disulfide bond. Fluorescence spectroscopy shows that the major groups in the protein that bind to Ca²⁺ should be the carboxylic side groups of glutamic acid and/or aspartic acid. Fluorescence and Fourier-transform infrared (FTIR) spectroscopic studies indicate that the conformation of the 33 kDa protein is altered upon reduction, while the reduced protein still retains the secondary structure. FTIR spectroscopy also shows that the metal ions induce a relative decrease of unordered structure and -sheet, and a substantial increase of -helix in both the intact and the reduced 33 kDa protein. This indicates that the addition of cations results in a much more compact structure and that both the intact and the reduced 33 kDa proteins have the ability to bind calcium. The above results may suggest that the disulfide bridge is not essential for calcium binding.Abbreviations CD circular dichroism - FTIR Fourier transform infrared - La lanthanum - PS photosystem - Tb terbium     

Insights on a new PDI-like family: structural and functional analysis of a protein disulfide oxidoreductase from the bacterium Aquifex aeolicus

A potential role in disulfide bond formation in the intracellular proteins of thermophilic organisms has recently been attributed to a new family of protein disulfide isomerase (PDI)-like proteins. Members of this family are characterized by a molecular mass of about 26kDa and by two Trx folds, each comprising a CXXC active site motif. We report on the functional and structural characterization of a new member of this family, which was isolated from the thermophilic bacterium Aquifex aeolicus (AaPDO). Functional studies have revealed the high catalytic efficiency of this enzyme in reducing, oxidizing and isomerizing disulfide bridges. Site-directed mutagenesis experiments have suggested that its two active sites have similar functional properties, i.e. that each of them imparts partial activity to the enzyme. This similarity was confirmed by the analysis of the enzyme crystal structure, which points to similar geometrical parameters and solvent accessibilities for the two active sites. The results demonstrated that AaPDO is the most PDI-like of all prokaryotic proteins so far known. Thus, further experimental studies on this enzyme are likely to provide important information on the eukaryotic homologue.     

Role of the 6-20 disulfide bridge in the structure and activity of epidermal growth factor

Two synthetic analogues of murine epidermal growth factor, [Abu6, 20] mEGF4-48 (where Abu denotes amino-butyric acid) and [G1, M3, K21, H40] mEGF1-48, have been investigated by NMR spectroscopy. [Abu6, 20] mEGF4-48 was designed to determine the contribution of the 6-20 disulfide bridge to the structure and function of mEGF. The overall structure of this analogue was similar to that of native mEGF, indicating that the loss of the 6-20 disulfide bridge did not affect the global fold of the molecule. Significant structural differences were observed near the N-terminus, however, with the direction of the polypeptide chain between residues four and nine being altered such that these residues were now located on the opposite face of the main beta-sheet from their position in native mEGF. Thermal denaturation experiments also showed that the structure of [Abu6, 20] mEGF4-48 was less stable than that of mEGF. Removal of this disulfide bridge resulted in a significant loss of both mitogenic activity in Balb/c 3T3 cells and receptor binding on A431 cells compared with native mEGF and mEGF4-48, implying that the structural changes in [Abu6, 20] mEGF4-48, although limited to the N-terminus, were sufficient to interfere with receptor binding. The loss of binding affinity probably arose mainly from steric interactions of the dislocated N-terminal region with part of the receptor binding surface of EGF. [G1, M3, K21, H40] mEGF1-48 was also synthesized in order to compare the synthetic polypeptide with the corresponding product of recombinant expression. Its mitogenic activity in Balb/c 3T3 cells was similar to that of native mEGF and analysis of its 1H chemical shifts suggested that its structure was also very similar to native.     

The disulfide bond pattern of catrocollastatin C, a disintegrin-like/cysteine-rich protein isolated from Crotalus atrox venom

The disulfide bond pattern of catrocollastatin-C was determined by N-terminal sequencing and mass spectrometry. The N-terminal disintegrin-like domain is a compact structure including eight disulfide bonds, seven of them in the same pattern as the disintegrin bitistatin. The protein has two extra cysteine residues (XIII and XVI) that form an additional disulfide bond that is characteristically found in the disintegrin-like domains of cellular metalloproteinases (ADAMs) and PIII snake venom Zn-metalloproteinases (SVMPs). The C-terminal cysteine-rich domain of catrocollastatin-C contains five disulfide bonds between nearest-neighbor cysteines and a long range disulfide bridge between CysV and CysX. These results provide structural evidence for a redefinition of the disintegrin-like and cysteine-rich domain boundaries. An evolutionary pathway for ADAMs, PIII, and PII SVMPs based on disulfide bond engineering is also proposed.     

Crystal structure of heat-labile enterotoxin from Escherichia coli with increased thermostability introduced by an engineered disulfide bond in the A subunit.

Cholera toxin (CT) produced by Vibrio cholerae and heat-labile enterotoxin (LT-I), produced by enterotoxigenic Escherichia coli, are AB5 heterohexamers with an ADP-ribosylating A subunit and a GM1 receptor binding B pentamer. These toxins are among the most potent mucosal adjuvants known and, hence, are of interest both for the development of anti-diarrheal vaccines against cholera or enterotoxigenic Escherichia coli diarrhea and also for vaccines in general. However, the A subunits of CT and LT-I are known to be relatively temperature sensitive. To improve the thermostability of LT-I an additional disulfide bond was introduced in the A1 subunit by means of the double mutation N40C and G166C. The crystal structure of this double mutant of LT-I has been determined to 2.0 A resolution. The protein structure of the N40C/G166C double mutant is very similar to the native structure except for a few local shifts near the new disulfide bond. The introduction of this additional disulfide bond increases the thermal stability of the A subunit of LT-I by 6 degrees C. The enhancement in thermostability could make this disulfide bond variant of LT-I of considerable interest for the design of enterotoxin-based vaccines.     

Isolation, renaturation, and formation of disulfide bonds of eukaryotic proteins expressed in Escherichia coli as inclusion bodies

Expression of recombinant proteins in Escherichia coli often results in the formation of insoluble inclusion bodies, In case of expression of eukaryotic proteins containing cysteine, which may form disulfide bonds in the native active protein, often nonnative inter- and intramolecular disulfide bonds exist in the inclusion bodies. Hence, several methods have been developed to isolate recombinant eukaryotic polypeptides from inclusion bodies, and to generate native disulfide bonds, to get active proteins. This article summarizes the different steps and methods of isolation and renaturation of eukaryotic proteins containing disulfide bonds, which have been expressed in E. coli as inclusion bodies, and shows which methods originally developed for studying the folding mechanism of naturally occurring proteins have been successfully adapted for reactivation of recombinant eukaryotic proteins. (c) 1993 John Wiley & Sons, Inc.     

The dsbA-dsbB disulfide bond formation system of Burkholderia cepacia is involved in the production of protease and alkaline phosphatase, motility, metal resistance, and multi-drug resistance

In a previous study, we isolated a dsbB mutant of Burkholderia cepacia KF1 and showed that phenotypes of protease production and motility are dependent on DsbB, a membrane-bound disulfide bond oxidoreductase. We have now isolated a dsbA mutant by transposon mutagenesis, cloned the dsbA gene encoding a periplasmic disulfide bond oxidoreductase, and characterized the function of the DsbA-DsbB disulfide bond formation system in B. cepacia. The complementing DNA fragment had an open reading frame for a 212-amino acid polypeptide with a potential redox-active site sequence of Cys-Pro-His-Cys that is homologous to Escherichia coli DsbA. The dsbA mutant, as well as the previously isolated dsbB mutant, was defective in the production of extracellular protease and alkaline phosphatase, as well as in motility. In addition, mutation in the DsbA-DsbB system resulted in an increase in sensitivity to Cd2+ and Zn2+ as well as a variety of antibiotics including beta-lactams, kanamycin, erythromycin, novobiocin, ofloxacin and sodium dodecyl sulfate. These results suggested that the DsbA-DsbB system might be involved in the formation of a metal efflux system as well as a multi-drug resistance system.     

OX133, a monoclonal antibody recognizing protein-bound N-ethylmaleimide for the identification of reduced disulfide bonds in proteins

In vivo, enzymatic reduction of some protein disulfide bonds, allosteric disulfide bonds, provides an important level of structural and functional regulation. The free cysteine residues generated can be labeled by maleimide reagents, including biotin derivatives, allowing the reduced protein to be detected or purified. During the screening of monoclonal antibodies for those specific for the reduced forms of proteins, we isolated OX133, a unique antibody that recognizes polypeptide resident, N-ethylmaleimide (NEM)-modified cysteine residues in a sequence-independent manner. OX133 offers an alternative to biotin-maleimide reagents for labeling reduced/alkylated antigens and capturing reduced/alkylated proteins with the advantage that NEM-modified proteins are more easily detected in mass spectrometry, and may be more easily recovered than is the case following capture with biotin based reagents.     

Role of the calcium ion and the disulfide bond in the Burkholderia glumae lipase

The role of the Ca²⁺ ion that is present in the structure of Burkholderia glumae lipase was investigated. Previously, we demonstrated that the denatured lipase could be refolded in vitro into an active enzyme in the absence of calcium. Thus, an essential role for the ion in catalytic activity or in protein folding can be excluded. Therefore, a possible role of the Ca²⁺ ion in stabilizing the enzyme was considered. Chelation of the Ca²⁺ ion by EDTA severely reduced the enzyme activity and increased its protease sensitivity, however, only at elevated temperatures. Furthermore, EDTA induced unfolding of the lipase in the presence of urea. From these results, it appeared that the Ca²⁺ ion in B. glumae lipase fulfils a structural role by stabilizing the enzyme under denaturing conditions. In contrast, calcium appears to play an additional role in the Pseudomonas aeruginosa lipase, since, unlike B. glumae lipase, in vitro refolding of this enzyme was strictly dependent on calcium. Besides the role of the Ca²⁺ ion, also the role of the disulfide bond in B. glumae lipase was studied. Incubation of the native enzyme with dithiothreitol reduced the enzyme activity and increased its protease sensitivity at elevated temperatures. Therefore, the disulfide bond, like calcium, appears to stabilize the enzyme under detrimental conditions.