Development of resistance in Cronobacter sakazakii ATCC 29544 to thermal and nonthermal processes after exposure to stressing environmental conditions

Aims: The objective was to study the response of Cronobacter sakazakii ATCC 29544 cells to heat, pulsed electric fields (PEF), ultrasound under pressure (Manosonication, MS) and ultraviolet light (UV‐C) treatments after exposure to different sublethal stresses that may be encountered in food‐processing environments. Methods and Results: Cronobacter sakazakii stationary growth‐phase cells (30°C, 24 h) were exposed to acid (pH 4·5, 1 h), alkaline (pH 9·0, 1 h), osmotic (5% NaCl, 1 h), oxidative (0·5 mmol l^?1 H₂O₂, 1 h), heat (47·5°C, 1 h) and cold (4°C, 4 h) stress conditions and subjected to the subsequent challenges: heat (60°C), PEF (25 kV cm^?1, 35°C), MS (117 μm, 200 kPa, 35°C) and UV‐C light (88·55 mW cm^?2, 25°C) treatments. The inactivation kinetics of C. sakazakii by the different technologies did not change after exposure to any of the stresses. The combinations of sublethal stress and lethal treatment that were protective were: heat shock–heat, heat shock–PEF and acid pH–PEF. Conversely, the alkaline shock sensitized the cells to heat and UV‐C treatments, the osmotic shock to heat treatments and the oxidative shock to UV‐C treatments. The maximum adaptive response was observed when heat‐shocked cells were subjected to a heat treatment, increasing the time to inactivate 99·9% of the population by 1·6 times. Conclusions: Cronobacter sakazakii resistance to thermal and nonthermal preservation technologies can increase or decrease as a consequence of previous exposure to stressing conditions. Significance and Impact of the Study: The results help in understanding the physiology of the resistance of this emerging pathogen to traditional and novel preservation technologies.     

Inactivation of Escherichia coli by citral

Aims: The aim was to evaluate (i) the resistance of Escherichia coli BJ4 to citral in a buffer system as a function of citral concentration, treatment medium pH, storage time and initial inoculum size, (ii) the role of the sigma factor RpoS on citral resistance of E. coli, (iii) the role of the cell envelope damage in the mechanism of microbial inactivation by citral and (iiii) possible synergistic effects of mild heat treatment and pulsed electric fields (PEF) treatment combined with citral. Methods and Results: The initial inoculum size greatly affected the efficacy of citral against E. coli cells. Exposure to 200 μl l^?1 of citral at pH 4·0 for 24 h at 20°C caused the inactivation of more than 5 log₁₀ cycles of cells starting at an inoculum size of 10⁶ or 10⁷ CFU ml^?1, whereas increasing the cell concentration to 10⁹ CFU ml^?1 caused <1 log₁₀ cycle of inactivation. Escherichia coli showed higher resistance to citral at pH 4·0 than pH 7·0. The rpoS null mutant strain E. coli BJ4L1 was less resistant to citral than the wild‐type strain. Occurrence of sublethal injury to both the cytoplasmic and outer membranes was demonstrated by adding sodium chloride or bile salts to the recovery media. The majority of sublethally injured cells by citral required energy and lipid synthesis for repair. A strongly synergistic lethal effect was shown by mild heat treatment combined with citral but the presence of citral during the application of a PEF treatment did not show any advantage. Conclusions: This work confirms that cell envelope damage is an important event in citral inactivation of bacteria, and it describes the key factors on the inactivation of E. coli cells by citral. Significance and Impact of the Study: Knowledge about the mechanism of microbial inactivation by citral helps establish successful combined preservation treatments.     

Relationship between Sublethal Injury and Inactivation of Yeast Cells by the Combination of Sorbic Acid and Pulsed Electric Fields

The objective of this study was to investigate the occurrence of sublethal injury after the pulsed-electric-field (PEF) treatment of two yeasts, Dekkera bruxellensis and Saccharomyces cerevisiae, as well as the relation of sublethal injury to the inactivating effect of the combination of PEF and sorbic acid. PEF caused sublethal injury in both yeasts: more than 90% of surviving D. bruxellensis cells and 99% of surviving S. cerevisiae cells were sublethally injured after 50 pulses at 12 kV/cm in buffer at pHs of both 7.0 and 4.0. The proportion of sublethally injured cells reached a maximum after 50 pulses at 12.0 kV/cm (S. cerevisiae) or 16.5 kV/cm (D. bruxellensis), and it kept constant or progressively decreased at greater electric field strengths and with longer PEF treatments. Sublethally PEF-injured cells showed sensitivity to the presence of sorbic acid at a concentration of 2,000 ppm. A synergistic inactivating effect of the combination of PEF and sorbic acid was observed. Survivors of the PEF treatment were progressively inactivated in the presence of 2,000 ppm of sorbic acid at pH 3.8, with the combined treatments achieving more than log₁₀ 5 cycles of dead cells under the conditions investigated. This study has demonstrated the occurrence of sublethal injury after exposure to PEF, so yeast inactivation by PEF is not an all-or-nothing event. The combination of PEF and sorbic acid has proven to be an effective method to achieve a higher level of yeast inactivation. This work contributes to the knowledge of the mechanism of microbial inactivation by PEF, and it may be useful for improving food preservation by PEF technology.     

Relationship between sublethal injury and inactivation of yeast cells by the combination of sorbic acid and pulsed electric fields

The objective of this study was to investigate the occurrence of sublethal injury after the pulsed-electric-field (PEF) treatment of two yeasts, Dekkera bruxellensis and Saccharomyces cerevisiae, as well as the relation of sublethal injury to the inactivating effect of the combination of PEF and sorbic acid. PEF caused sublethal injury in both yeasts: more than 90% of surviving D. bruxellensis cells and 99% of surviving S. cerevisiae cells were sublethally injured after 50 pulses at 12 kV/cm in buffer at pHs of both 7.0 and 4.0. The proportion of sublethally injured cells reached a maximum after 50 pulses at 12.0 kV/cm (S. cerevisiae) or 16.5 kV/cm (D. bruxellensis), and it kept constant or progressively decreased at greater electric field strengths and with longer PEF treatments. Sublethally PEF-injured cells showed sensitivity to the presence of sorbic acid at a concentration of 2,000 ppm. A synergistic inactivating effect of the combination of PEF and sorbic acid was observed. Survivors of the PEF treatment were progressively inactivated in the presence of 2,000 ppm of sorbic acid at pH 3.8, with the combined treatments achieving more than log10 5 cycles of dead cells under the conditions investigated. This study has demonstrated the occurrence of sublethal injury after exposure to PEF, so yeast inactivation by PEF is not an all-or-nothing event. The combination of PEF and sorbic acid has proven to be an effective method to achieve a higher level of yeast inactivation. This work contributes to the knowledge of the mechanism of microbial inactivation by PEF, and it may be useful for improving food preservation by PEF technology.     

Membrane Permeabilization in Relation to Inactivation Kinetics of Lactobacillus Species due to Pulsed Electric Fields

Membrane permeabilization due to pulsed electric field (PEF) treatment of gram-positive Lactobacillus cells was investigated by using propidium iodide uptake and single-cell analysis with flow cytometry. Electric field strength, energy input, treatment time, and growth phase affected membrane permeabilization of Lactobacillus plantarum during PEF treatment. A correlation between PEF inactivation and membrane permeabilization of L. plantarum cells was demonstrated, whereas no relationship was observed between membrane permeabilization and heat inactivation. The same results were obtained with a Lactobacillus fermentum strain, but the latter organism was more PEF resistant and exhibited less membrane permeabilization, indicating that various bacteria have different responses to PEF treatment. While membrane permeabilization was the main factor involved in the mechanism of inactivation, the growth phase and the acidity of the environment also influenced inactivation. By using flow cytometry it was possible to sort cells in the L. plantarum population based on different cell sizes and shapes, and the results were confirmed by image analysis. An apparent effect of morphology on membrane permeabilization was observed, and larger cells were more easily permeabilized than smaller cells. In conclusion, our results indicate that the ability of PEF treatment to cause membrane permeabilization is an important factor in determining inactivation. This finding should have an effect on the final choice of the processing parameters used so that all microorganisms can be inactivated and, consequently, on the use of PEF treatment as an alternative method for preserving food products.     

Relationship between Sublethal Injury and Microbial Inactivation by the Combination of High Hydrostatic Pressure and Citral or tert-Butyl Hydroquinone

The aim was to investigate (i) the occurrence of sublethal injury in Listeria monocytogenes, Escherichia coli, and Saccharomyces cerevisiae after high hydrostatic pressure (HHP) treatment as a function of the treatment medium pH and composition and (ii) the relationship between the occurrence of sublethal injury and the inactivating effect of a combination of HHP and two antimicrobial compounds, tert-butyl hydroquinone (TBHQ) and citral. The three microorganisms showed a high proportion of sublethally injured cells (up to 99.99% of the surviving population) after HHP. In E. coli and L. monocytogenes, the extent of inactivation and sublethal injury depended on the pH and the composition of the treatment medium, whereas in S. cerevisiae, inactivation and sublethal injury were independent of medium pH or composition under the conditions tested. TBHQ alone was not lethal to E. coli or L. monocytogenes but acted synergistically with HHP and 24-h refrigeration, resulting in a viability decrease of >5 log₁₀ cycles of both organisms. The antimicrobial effect of citral depended on the microorganism and the treatment medium pH. Acting alone for 24 h under refrigeration, 1,000 ppm of citral caused a reduction of 5 log₁₀ cycles of E. coli at pH 7.0 and almost 3 log₁₀ cycles of L. monocytogenes at pH 4.0. The combination of citral and HHP also showed a synergistic effect. Our results have confirmed that the detection of sublethal injury after HHP may contribute to the identification of those treatment conditions under which HHP may act synergistically with other preserving processes.     

Use of bacteriophage endolysin EL188 and outer membrane permeabilizers against Pseudomonas aeruginosa

Aims: To select and evaluate an appropriate outer membrane (OM) permeabilizer to use in combination with the highly muralytic bacteriophage endolysin EL188 to inactivate (multi‐resistant) Pseudomonas aeruginosa. Methods and Results: We tested the combination of endolysin EL188 and several OM permeabilizing compounds on three selected Ps. aeruginosa strains with varying antibiotic resistance. We analysed OM permeabilization using the hydrophobic probe N‐phenylnaphtylamine and a recombinant fusion protein of a peptidoglycan binding domain and green fluorescent protein on the one hand and cell lysis assays on the other hand. Antibacterial assays showed that incubation of 10⁶Ps. aeruginosa cells ml^?1 in presence of 10 mmol l^?1 ethylene diamine tetraacetic acid disodium salt dihydrate (EDTA) and 50 μg ml^?1 endolysin EL188 led to a strain‐dependent inactivation between 3·01 ± 0·17 and 4·27 ± 0·11 log units in 30 min. Increasing the EL188 concentration to 250 μg ml^?1 further increased the inactivation of the most antibiotic resistant strain Br667 (4·07 ± 0·09 log units). Conclusions: Ethylene diamine tetraacetic acid disodium salt dihydrate was selected as the most suitable component to combine with EL188 in order to reduce Ps. aeruginosa with up to 4 log units in a time interval of 30 min. Significance and Impact of the Study: This in vitro study demonstrates that the application range of bacteriophage encoded endolysins as ‘enzybiotics’ must not be limited to gram‐positive pathogens.     

Pulsed electric fields cause sublethal injury in Escherichia coli

AIMS: The objective was to investigate the occurrence of sublethal injury in Escherichia coli by pulsed electric fields (PEF) at different pH values. METHODS AND RESULTS: The occurrence of sublethal injury in PEF-treated E. coli cells depended on the pH of the treatment medium. Whereas a slight sublethal injury was detected at pH 7, 99.95% of survivors were injured when cells were treated at pH 4 for 400 micros at 19 kV. The PEF-injured cells were progressively inactivated by a subsequent holding at pH 4. CONCLUSIONS: PEF cause sublethal injury in E. coli. The measurement of sublethal injury using a selective medium plating technique allowed prediction of the number of cells that would be inactivated by subsequent storage in acidic conditions. SIGNIFICANCE AND IMPACT OF THE STUDY: This work could be useful for improving food preservation by PEF technology and contributes to the knowledge of the mechanism of microbial inactivation by PEF.     

Membrane permeabilization in relation to inactivation kinetics of Lactobacillus species due to pulsed electric fields.

Membrane permeabilization due to pulsed electric field (PEF) treatment of gram-positive Lactobacillus cells was investigated by using propidium iodide uptake and single-cell analysis with flow cytometry. Electric field strength, energy input, treatment time, and growth phase affected membrane permeabilization of Lactobacillus plantarum during PEF treatment. A correlation between PEF inactivation and membrane permeabilization of L. plantarum cells was demonstrated, whereas no relationship was observed between membrane permeabilization and heat inactivation. The same results were obtained with a Lactobacillus fermentum strain, but the latter organism was more PEF resistant and exhibited less membrane permeabilization, indicating that various bacteria have different responses to PEF treatment. While membrane permeabilization was the main factor involved in the mechanism of inactivation, the growth phase and the acidity of the environment also influenced inactivation. By using flow cytometry it was possible to sort cells in the L. plantarum population based on different cell sizes and shapes, and the results were confirmed by image analysis. An apparent effect of morphology on membrane permeabilization was observed, and larger cells were more easily permeabilized than smaller cells. In conclusion, our results indicate that the ability of PEF treatment to cause membrane permeabilization is an important factor in determining inactivation. This finding should have an effect on the final choice of the processing parameters used so that all microorganisms can be inactivated and, consequently, on the use of PEF treatment as an alternative method for preserving food products.     

Occurrence of sublethal injury after pulsed electric fields depending on the micro-organism, the treatment medium ph and the intensity of the treatment investigated

AIMS: The objective was to investigate the occurrence of sublethal injury after pulsed electric field (PEF) depending on the treatment time, the electric field strength and the pH of the treatment media in two Gram-positive (Bacillus subtilis ssp. niger, Listeria monocytogenes) and six Gram-negative (Escherichia coli, Escherichia coli O157:H7, Pseudomonas aeruginosa, Salmonella serotype Senftenberg 775W, Salmonella serotype Typhimurium, Yersinia enterocolitica) bacterial strains. METHODS AND RESULTS: A characteristic behaviour was observed for the Gram-positive and Gram-negative bacteria studied. Whereas Gram-positive bacteria showed a higher PEF resistance at pH 7.0, the Gram-negative were more resistant at pH 4.0. In these conditions, in which bacteria showed their maximum resistance, a large proportion of sublethally injured cells were detected. In most cases, the longer the treatment time and the higher the electric field applied, the greater the proportion of sublethally injured cells that were detected. No sublethal injury was detected when Gram-positive bacteria were treated at pH 4.0 and Gram-negative at pH 7.0. CONCLUSIONS: Sublethal injury was detected after PEF so, bacterial inactivation by PEF is not an 'all or nothing' event. SIGNIFICANCE AND IMPACT OF THE STUDY: This work could be useful for improving food preservation by PEF.     

Biosynthetic requirements for the repair of sublethal membrane damage in Escherichia coli cells after pulsed electric fields

AIMS: The aim was to evaluate the biosynthetic requirements for the repair of sublethal membrane damages in Escherichia coli cells after exposure to pulsed electric fields (PEF). METHODS AND RESULTS: The partial loss of the barrier and homeostatic functions of the cytoplasmic membrane was examined by adding sodium chloride to the recovery media. More than 4 log10 cycles of survivors were sublethally injured after PEF. Repair of such sublethal membrane damages occurred when survivors to PEF were incubated in peptone water for 2 h. Two different types of sublethally injured cells were detected. Whereas a small proportion (<5%) repaired after PEF in less than 2 min, the repair of the remaining 95% injured cells lasted 2 h and was dependent on biosynthetic requirements. The addition of inhibitors such as chloramphenicol, cerulenin, penicillin G, rifampicin and sodium azide to the liquid repair medium showed that the repair required energy and lipid synthesis, and was not dependent on protein, peptidoglican or RNA synthesis. CONCLUSIONS: Cell survival after PEF is dependent on the repair of the cytoplasmic membrane. Requirement of lipid synthesis for the repair of sublethally injured cells confirms that the cytoplasmic membrane is a target directly involved in the mechanism of inactivation by PEF. SIGNIFICANCE AND IMPACT OF THE STUDY: Knowledge about the damages inflicted by PEF might help in the design of more efficient treatments.     

Synergistic action of rapid chilling and nisin on the inactivation of Escherichia coli

The effect of rapid and slow chilling on survival and nisin sensitivity was investigated in Escherichia coli. Membrane permeabilization induced by cold shock was assessed by uptake of the fluorescent dye 1-N-phenylnapthylamine. Slow chilling (2°C min⁻¹) did not induce transient susceptibility to nisin. Combining rapid chilling (2,000°C min⁻¹) and nisin causes a dose-dependent reduction in the population of cells in both exponential and stationary growth phases. A reduction of 6 log of exponentially growing cells was achieved with rapid chilling in the presence of 100 IU ml⁻¹ nisin. Cells were more sensitive if nisin was present during stress. Nevertheless, addition of nisin to cell suspension after the rapid chilling produced up to 5 log of cell inactivation for exponentially growing cells and 1 log for stationary growing cells. This suggests that the rapid chilling strongly damaged the cell membrane by disrupting the outer membrane barrier, allowing the sensitization of E. coli to nisin post-rapid chilling. Measurements of membrane permeabilization showed a good correlation between the membrane alteration and nisin sensitivity. Application involving the simultaneous treatment with nisin and rapid cold shock could thus be of value in controlling Gram negatives, enhancing microbiological safety and stability.     

Effects of ozone on membrane permeability and ultrastructure in Pseudomonas aeruginosa

Aims: To examine the mechanism of ozone‐induced damage to cytoplasmic membrane and cell ultrastructure of Pseudomonas aeruginosa ATCC27853. Methods and Results: Cell suspensions of Ps. aeruginosa ATCC27853 were treated with ozonated water. The leakages of cellular potassium (K⁺), magnesium (Mg²⁺) and adenosine triphosphate (ATP), determined by inductively coupled plasma/mass spectrometry (ICP/MS) and a commercial bioluminescence assay kit, were to assess ozone‐induced damage to the cytoplasmic membrane. Maximum leakages of K⁺ and Mg²⁺ were attained, respectively, at 0·53 mg l^?1 ozone after 0·5 and 2 min with >99% inactivation of culturable bacteria, while that of ATP was achieved at 0·67 mg l^?1 ozone after 1 min. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) revealed that treated cells retained intact shapes and cytoplasm agglutinations and vacuoles occurred. Conclusions: Ozone inactivates Ps. aeruginosa ATCC27853 by the combined results of increased cytoplasmic membrane permeability and cytoplasm coagulation, rather than by severe membrane disruption and cell lysis. Significance and Impact of the Study: Pseudomonas aeruginosa is a common water‐related pathogen. These insights into the leakage of cytoplasmic components and ultrastructural changes provide evidence for the mechanisms of ozone‐mediated inactivation.     

Inhibitory activity of natural antimicrobial compounds alone or in combination with nisin against Enterobacter sakazakii

Aim: To determine the antimicrobial activity of natural organic compounds alone and in combination with nisin on the growth of Enterobacter sakazakii in laboratory media. Methods and Results: The minimum inhibitory concentrations (MIC) of five natural organic compounds were determined, and their effects in combination with nisin were evaluated by comparing treatment with each natural organic compound alone and in combination with 25 mg ml^?1 nisin in tryptic soy broth. Among the tested natural organic compounds, the MIC of carvacrol and thymol was 1·25 mmol l^?1 and showed the strongest inhibitory activity against E. sakazakii, whereas the MIC of cinnamic acid was higher than 5 mmol l^?1, and therefore showed the weakest inhibitory activity. However, the combination of each compound with nisin did not result in the enhancement of their antimicrobial activities except when nisin was combined with diacetyl. Conclusions: The order of inhibition attributed to natural organic compounds was carvacrol = thymol > eugenol > diacetyl > cinnamic acid, and only the combination of diacetyl and nisin showed a synergistic effect of inhibiting the growth of E. sakazakii. Significance and Impact of the Study: This study shows the potential of natural organic compounds for controlling E. sakazakii.     

Damage of Escherichia coli membrane by bactericidal agent polyhexamethylene guanidine hydrochloride: micrographic evidences

Aims: The purpose of this study was to provide micrographic evidences for the damaged membrane structure and intracellular structure change of Escherichia coli strain 8099, induced by polyhexamethylene guanidine hydrochloride (PHMG). Methods and Results: The bactericidal effect of PHMG on E. coli was investigated based on β‐galactosidase activity assay, fluorescein‐5‐isothiocyanate confocal laser scanning microscopy, field emission scanning electron microscopy and transmission electron microscopy. The results revealed that a low dose (13 μg ml^?1) of PHMG slightly damaged the outer membrane structure of the treated bacteria and increased the permeability of the cytoplasmic membrane, while no significant damage was observed to the morphological structure of the cells. A high dose (23 μg ml^?1) of PHMG collapsed the outer membrane structure, led to the formation of a local membrane pore across the membrane and badly damaged the internal structure of the cells. Subsequently, intracellular components were leaked followed by cell inactivation. Conclusions: Dose‐dependent membrane disruption was the main bactericidal mechanism of PHMG. The formation of the local membrane pores was probable after exposure to a high dose (23 μg ml^?1) of PHMG. Micrographic evidences were provided about the damaged membrane structure and intracellular structure change of E. coli. Significance and Impact of the Study: The presented information helps understand the bactericidal mechanism of PHMG by membrane damage.     

Sensitivities of Germinating Spores and Carvacrol-Adapted Vegetative Cells and Spores of Bacillus cereus to Nisin and Pulsed-Electric-Field Treatment

Treatment of Bacillus cereus spores with nisin and/or pulsed-electric-field (PEF) treatment did not lead to direct inactivation of the spores or increased heat sensitivity as a result of sublethal damage. In contrast, germinating spores were found to be sensitive to PEF treatment. Nisin treatment was more efficient than PEF treatment for inactivating germinating spores. PEF resistance was lost after 50 min of germination, and not all germinated spores could be inactivated. Nisin, however, was able to inactivate the germinating spores to the same extent as heat treatment. Resistance to nisin was lost immediately when the germination process started. A decrease in the membrane fluidity of vegetative cells caused by incubation in the presence of carvacrol resulted in a dramatic increase in the sensitivity to nisin. On the other hand, inactivation by PEF treatment or by a combination of nisin and PEF treatments did not change after adaptation to carvacrol. Spores grown in the presence of carvacrol were not susceptible to nisin and/or PEF treatment in any way.     

Inactivation of Bacillus cereus by Na‐chlorophyllin‐based photosensitization on the surface of packaging

Aims: This study was focused on the possibility to inactivate food‐borne pathogen Bacillus cereus by Na‐chlorophyllin (Na‐Chl)‐based photosensitization in vitro and after attachment to the surface of packaging material. Methods and Results: Bacillus cereus in vitro or attached to the packaging was incubated with Na‐Chl (7·5 × 10^?8 to 7·5 × 10^?5 mol l^?1) for 2–60 min in phosphate buffer saline. Photosensitization was performed by illuminating cells under a light with a λ of 400 nm and an energy density of 20 mW cm^?2. The illumination time varied 0–5 min and subsequently the total energy dose was 0–6 J cm^?2. The results show that B. cereus vegetative cells in vitro or attached to the surface of packaging after incubation with 7·5 × 10^?7 mol l^?1 Na‐Chl and following illumination were inactivated by 7 log. The photoinactivation of B. cereus spores in vitro by 4 log required higher (7·5 × 10^?6 mol l^?1) Na‐Chl concentration. Decontamination of packaging material from attached spores by photosensitization reached 5 log at 7·5 × 10^?5 mol l^?1 Na‐Chl concentration. Comparative analysis of different packaging decontamination treatments indicates that washing with water can diminish pathogen population on the surface by <1 log, 100 ppm Na‐hypochlorite reduces the pathogens about 1·7 log and 200 ppm Na‐hypochlorite by 2·2 log. Meanwhile, Na‐Chl‐based photosensitization reduces bacteria on the surface by 4·2 orders of magnitude. Conclusions: Food‐borne pathogen B. cereus could be effectively inactivated (7 log) by Na‐Chl‐based photosensitization in vitro and on the surface of packaging material. Spores are more resistant than vegetative cells to photosensitization‐based inactivation. Comparison of different surface decontamination treatments indicates that Na‐Chl‐based photosensitization is much more effective antibacterial tool than washing with water or 200 ppm Na‐hypochlorite. Significance and Impact of the Study: Our data support the idea that Na‐Chl‐based photosensitization has great potential for future application as an environment‐friendly, nonthermal surface decontamination technique.     

Effects of High Pressure on Survival and Metabolic Activity of Lactobacillus plantarum TMW1.460

The application of high pressure (HP) for food preservation requires insight into mechanisms of HP-mediated cell injury and death. The HP inactivation in model beer of Lactobacillus plantarum TMW1.460, a beer-spoiling organism, was investigated at pressures ranging from 200 to 600 MPa. Surviving cells were characterized by determination of (i) cell viability and sublethal injury, (ii) membrane permeability to the fluorescent dyes propidium iodide (PI) and ethidium bromide (EB), (iii) metabolic activity with tetrazolium salts, and (iv) the activity of HorA, an ATP binding cassette-type multidrug resistance transporter conferring resistance to hop compounds. HP inactivation curves exhibited a shoulder, an exponential inactivation phase, and pronounced tailing caused by a barotolerant fraction of the population, about 1 in 10⁶ cells. During exponential inactivation, more than 99.99% of cells were sublethally injured; however, no sublethal injury was detected in the barotolerant fraction of the culture. Sublethally injured cells were metabolically active, and loss of metabolic activity corresponded to the decrease of cell viability. Membrane damage measured by PI uptake occurred later than cell death, indicating that dye exclusion may be used as a fail-safe method for preliminary characterization of HP inactivation. An increase of membrane permeability to EB and a reduction of HorA activity were observed prior to the loss of cell viability, indicating loss of hop resistance of pressurized cells. Even mild HP treatments thus abolished the ability of cells to survive under adverse conditions.     

Effect of various environmental factors on the viability of Cryptosporidium parvum oocysts

Aims: To evaluate individual and combined effects of temperature (4, 18 and 25°C), pH (7 and 10), ammonia (5 and 50 mg l^?1) and exposure time (1, 2, 4 and 6 days) on the viability of Cryptosporidium parvum oocysts in water. Methods and Results: The viability of oocysts was evaluated using the fluorogenic vital dyes assay (4′,6‐diamidino‐2‐phenylindole and propidium iodide). All the factors analysed (temperature, pH, ammonia and exposure time) and their interaction were statistically significant (P < 0·005). Exposure of oocysts to pH 10 for 6 days at 25°C reduced oocyst viability from ～80% to 51%. Similarly, the exposure of C. parvum oocysts to 5 mg NH₃ l^?1 and 50 mg NH₃ l^?1 for 4 days reduced their viability from between ～80% to 41·5% and 14·8%, respectively. Conclusions: The interaction between pH, temperature and exposure time may have adverse effects on the survival of C. parvum oocysts in water. Low concentrations of ammonia, as commonly found in alga‐based wastewater systems, over a long period of time can produce high C. parvum oocyst inactivation rates. Significance and Impact of the Study: This study provides relevant data on the inactivation of C. parvum oocysts in alga‐based wastewater‐treatment systems in the northwest of Spain.