An aptamer based resonance light scattering assay of prostate specific antigen

Prostate specific antigen (PSA) is a valuable tumor marker for prostate cancer screening. In this work, a novel and sensitive resonance light scattering (RLS) spectral assay of PSA was proposed based on PSA aptamer modified gold nanoparticles (AuNPs). The sulfhydryl modified single-strand aptamer could interact with AuNPs, which made the AuNPs stable in high concentration of salt. In pH 7.0 BR buffer solution, the highly selective combination of PSA and AuNPs-labeling aptamer resulted in the aggregation of AuNPs which showed high RLS intensity. Under the optimal conditions, the magnitude of enhanced RLS intensity (ΔI(RLS)) was proportional to the concentration of PSA in the range from 0.13 to 110 ng/mL, with a detection limit (LOD, 3σ) of 0.032 ng/mL. This developed RLS assay as well as a commercially available enzyme-linked immunosorbent assay (ELISA) kit was successfully applied to the detection of PSA in 15 serum samples, and an excellent correlation of the levels of PSA measured was obtained. This is the first report of the aptamer based RLS assay for PSA and it is also a significant application of instrumental analysis technique.     

Determination of urinary adenosine using resonance light scattering of gold nanoparticles modified structure-switching aptamer

A novel sensitive method has been developed for the detection of adenosine (AD) in human urine by using enhanced resonance light scattering (RLS). This method is based on the specific recognition and signal amplification of adenosine aptamer (Apt) coupled with gold nanoparticles (GNPs) via G-quartet-induced nanoparticle assembly, which was fabricated by triggering a structure switching of the 3′ terminus G-rich sequence and aptamer duplex. RLS signal linearly correlated with the concentration of adenosine over the range of 6-115 nM. The limit of detection (LOD) for adenosine is 1.8 nM with relative standard deviations (RSD) of 2.90-4.80% (n = 6). The present method has been successfully applied to determination of adenosine in real human urine, and the obtained results were in good agreement with those obtained by the HPLC method. Our investigation shows that the combination of the excellent selectivity of aptamer with the high sensitivity of the RLS technique could provide a promising potential for aptamer-based small molecule detection, and be beneficial in extending the application of RLS.     

Determination of bismuth in pharmaceutical products using phosphoric acid as molecular probe by resonance light scattering

A novel method for the sensitive determination of bismuth(III) in pharmaceutical products using phosphoric acid as a molecular probe by resonance light scattering (RLS) is discussed. In 0.5 mol/L phosphoric acid (H₃PO₄) medium, bismuth(III) reacted with PO₄^3? to form an ion association compound, which resulted in the significant enhancement of RLS intensity and the appearance of the corresponding RLS spectral characteristics. The maximum scattering peak of the system existed at 364 nm. Under optimal conditions, there was linear relationship between the relative intensity of RLS and concentration of bismuth(III) in the range of 0.06–10.0 µg/mL for the system. A low detection limit for bismuth(III) of 3.22 ng/mL was achieved. The relative standard deviations (RSD) for the determination of 0.40 and 0.80 µg/mL bismuth(III) were 2.1% and 1.1%, respectively, for five determinations. Based on this fact, a simple, rapid, and sensitive method was developed for the determination of bismuth(III) at nanogram level by RLS technique with a common spectrofluorimeter. This analytical system was successfully applied to determine the trace amounts of bismuth(III) in pharmaceutical products, which was in good agreement with the results obtained by atomic absorption spectrometry (AAS). Copyright © 2011 John Wiley & Sons, Ltd.     

Study of the interaction of hexa-amine cobalt (III) ion with DNA by a resonance light scattering technique and its analytical application.

The effect of hexa-amine cobalt cations on the DNA condensation in aqueous solution was investigated by resonance light scattering (RLS). When the relative concentration of hexa-amine cobalt (III) cations to DNA is in the appropriate range, the cations will induce DNA condensation and aggregation, which results in a strong RLS spectrum characterized by a peak at 290.0 nm. The RLS technique is a powerful tool for monitoring DNA condensation and, under optimal conditions, the enhanced RLS intensity at 290.0 nm was proportional to the concentration of DNA in the range 0.01-6.0 microg/mL. Based on this, a sensitive and convenient analysis method for the microdetermination of DNA was established. The detection limit (3 s) of calf thymus DNA by the proposed method is 1.9 ng/mL and few substances interfere in the DNA determination.     

Electrochemical impedimetric immunosensor for insulin like growth factor-1 using specific monoclonal antibody-nanogold modified electrode

An electrochemical impedimetric immunosensor was developed for ultrasensitive determination of insulin-like growth factor-1 (IGF-1) based on immobilization of a specific monoclonal antibody on gold nanoparticles (GNPs) modified gold electrode. Self-assembly of colloidal gold nanoparticles on the gold electrode was conducted through the thiol groups of 1,6-hexanedithiol (HDT) monolayer as a cross linker. The redox reactions of [Fe(CN)(6)](4-)/[Fe(CN)(6)](3-) on the electrode surface was probed for studying the immobilization and determination processes, using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The interaction of antigen with grafted antibody recognition layer was carried out by soaking the modified electrode into antigen solution at 37°C for 3 h. The immunosensor showed linearity over 1.0-180.0 pg mL(-1) and the limit of detection was 0.15 pg mL(-1). The association constant between IGF-1 and immobilized antibody was calculated to be 9.17×10(11) M(-1). The proposed method is a useful tool for screening picogram amounts of IGF-1 in clinical laboratory as a diagnostic test.     

Determination of propafenone hydrochloride by flow‐injection analysis coupled with resonance light scattering detection

A simple, sensitive and rapid flow injection analysis (FIA) method with resonance light scattering (RLS) was described for the determination of propafenone (PPF). The method was based on the ion‐association reaction of 12‐tungstophosphoric acid (TP) with propafenone. In pH 1.0 acidic medium, TP reacted with PPF to form an ion‐associate complex, which resulted in a significant enhancement of RLS intensity. The maximum scattering peak was located at 340 nm, the RLS intensity was proportional to the concentration of PPF in the range 0.003–9.0 µg/mL, and the detection limit (3σ) of 1.0 ng/mL was obtained at a sampling rate of 60 samples/h. The feasible reaction conditions and FIA parameters for the system were optimized. The method proposed in this paper shows satisfactory reproducibility with a relative standard deviation (RSD) of 2.1% for 10 successive determinations of 2.0 µg/mL PPF. The present method had been successfully applied to the determination of PPF in serum samples and pharmaceutical samples. The results obtained were in agreement with the method used in the Chinese Pharmacopoeia. Copyright © 2008 John Wiley & Sons, Ltd.     

Use of sodium lauroyl sarcosinate in a high-sensitivity protein assay by resonance light scattering technique

A simple and high-sensitivity method has been developed for the determination of proteins in aqueous solutions by resonance light scattering (RLS) technique. At pH 3.4 and ionic strength 1.2 x 10(-3), the weak RLS intensity of sodium lauroyl sarcosinate was greatly enhanced by the addition of proteins with the maximum peak located at 391 nm. Under the optimum conditions, the enhanced RLS intensities were in proportion to the concentrations of proteins in the range of 0.04 to 2.1 microg/mL for lysozyme, 0.0025 to 1.2 microg/mL for bovine serum albumin, 0.0075 to 0.9 microg/mL for human serum albumin, 0.02 to 1.4 microg/mL for gamma-globulin, 0.02 to 0.8 microg/mL for egg albumin, and 0.01 to 0.6 microg/mL for hemoglobin. Low detection limits ranging from 0.8 ng/mL to 4.3 ng/mL depending on the kind of proteins that have been achieved. The protein concentrations in synthetic samples and real biochemical samples were determined with satisfactory results. This method presented here is not only sensitive and simple but also reliable and suitable for practical bioassay applications.     

Resonance light scattering study on the interaction of benproperine phosphate with eriochrome blue black R in the presence of sodium dodecylbenzene sulphonate and its analytical application

The interaction of benproperine phosphate (BPP) with eriochrome blue black R (EBBR) in the presence of sodium dodecylbenzene sulphonate (SDBS) was studied using resonance light scattering (RLS) technology and ultraviolet‐visual (UV‐vis) spectrophotometry. Under optimum conditions, BPP reacts with EBBP and SDBS to form a three‐component complex, which results in strong RLS signal and a new RLS peak. The enhanced RLS intensities are proportional to the concentration of BPP over the range 0.6–28.0 µg/mL, with a detection limit of 0.053 µg/mL. The affecting factors as well as the influence of coexisting substances were investigated. The results indicate that this assay method could be applied to the determination of BPP in pharmaceuticals, serum and urine samples with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.     

Study on the Interaction Between Nucleic Acids and Imidacloprid and Its Application

The determination of imidacloprid with DNA via a resonance light scattering (RLS) technique was developed. The RLS of DNA was remarkably quenched after adding imidacloprid in aqueous medium of pH 2.10. An RLS peak at 311 nm was found, and the quenched intensity of RLS at this wavelength was proportional to the concentration of imidacloprid. The linear range of the calibration curve was approximately 0.02–2 μg/mL with the detection limit (S/N = 3) of 0.02 ng/mL. The imidacloprid in river water, cucumbers, and apple samples was determined. The recovery rates were in the range of 91.9% to 95.20%, 97.2% to 111.3%, and 94.5% to 114.8%, respectively. The mechanism of the reaction between imidacloprid and DNA is also discussed.     

Trace analysis of N‐acetyl‐L‐cysteine using luminol–H2O2 chemiluminescence system catalyzed by silver nanoparticles

N‐Acetyl‐L‐cysteine (NAC) can inhibit the luminol–H₂O₂, reaction, which is catalyzed by silver nanoparticles. Based on this phenomenon a new method was developed for NAC determination. Under optimum conditions, a linear relationship between chemiluminescence intensity and NAC concentration was found in the range 0.034–0.98 µg/mL. The detection limit was 0.010 µg/mL (S/N =3), and the relative standard deviation (RSD) was <5% for 0.480 µg/mL NAC (n =5). This simple, sensitive and inexpensive method has been applied to measure the concentration of NAC in pharmaceutical tablets. Copyright © 2014 John Wiley & Sons, Ltd.     

Development of a sensitive and rapid nucleic acid assay with tetraphenyl porphyrinatoiron chloride by a resonance light scattering technique.

Based on the interaction between nucleic acids and tetraphenyl porphyrinatoiron chloride (FeTPPCl), a novel method for the determination of nucleic acids at the nanogram level has been developed. Under the optimum conditions, the weak resonance light scattering (RLS) intensity of FeTPPCl was greatly enhanced by nucleic acids and the enhanced RLS intensity was proportional to the concentration of nucleic acids in the range 0.02-2.8 microg/mL for calf thymus DNA, 0.05-3.3 microg/mL for fish sperm DNA and 0.07-4.5 microg/mL for yeast RNA. The detection limits (3sigma) were 2.9 ng/mL for calf thymus DNA, 3.9 ng/mL for fish sperm DNA and 5.2 ng/mL for yeast RNA. Almost no interference could be observed from proteins, nucleosides and most of the metal ions. The proposed method showed good reliability, sensitivity, rapidity and reproducibility when applied to the determination of nucleic acids in synthetic and biochemical samples. The time savings make this method suitable for large routine analyses.     

Electrochemical immunosensor for casein based on gold nanoparticles and poly(L-Arginine)/multi-walled carbon nanotubes composite film functionalized interface

In this paper, a novel electrochemical immunosensor for the determination of casein based on gold nanoparticles and poly(L-Arginine)/multi-walled carbon nanotubes (P-L-Arg/MWCNTs) composite film was proposed. The P-L-Arg/MWCNTs composite film was used to modify glassy carbon electrode (GCE) to fabricate P-L-Arg/MWCNTs/GCE through electropolymerization of L-Arginine on MWCNTs/GCE. Gold nanoparticles were adsorbed on the modified electrode to immobilize the casein antibody and to construct the immunosensor. The stepwise assembly process of the immunosensor was characterized by cyclic voltammetry and differential pulse voltammetry. Results demonstrated that the peak currents of [Fe(CN)(6)](3-/4-) redox pair decreased due to the formation of antibody-antigen complex on the modified electrode. The optimization of the adsorption time of gold nanoparticles, the pH of supporting electrolyte and the incubation time were investigated in details. Under optimal conditions, the peak currents obtained by DPV decreased linearly with the increasing casein concentrations in the range from 1 × 10(-7) to 1 × 10(-5) g mL(-1) with a linear coefficiency of 0.993. This electrochemical immunoassay has a low detection limit of 5 × 10(-8) g mL(-1) and was successfully applied to the determination of casein in cheese samples.     

New amperometric and potentiometric immunosensors based on gold nanoparticles/tris(2,2'-bipyridyl)cobalt(III) multilayer films for hepatitis B surface antigen determinations

Two generic, fast, sensitive and novel electrochemical immunosensors have been developed. Initially, a layer of plasma-polymerized Nafion film (PPF) was deposited on the platinum electrode surface, then positively charged tris(2,2'-bipyridyl)cobalt(III) (Co(bpy)(3)(3+)) and negatively charged gold nanoparticles were assembled on the PPF-modified Pt electrode by layer-by-layer technique. Finally, hepatitis B surface antibody (HBsAb) was electrostatically adsorbed on the gold nanoparticles surface. Electrochemical behavior of the {Au/Co(bpy)(3)(3+)}(n) multilayer film-modified electrodes was studied. Cyclic voltammetry, electrochemical impedance spectroscopy (EIS) were adopted to monitor the regular growth of the multilayer films. The performance and factors influencing the performance of the resulting immunosensors were studied in detail. The multilayer film-modified immunosensor was used for hepatitis B surface antigen (HBsAg) determination via the amperometric and potentiometric immunosensor systems, and both systems provided the same linear ranges from 0.05 to 4.5 microg/mL with different detection limits for the amperometric system 0.005 microg/mL and for the potentiometric system 0.015 microg/mL. The immunosensors were used to analyse HBsAg in human serum samples. Analytical results of clinical samples show that the developed immunoassay is comparable with the enzyme-linked immunosorbent assays (ELISAs) method, implying a promising alternative approach for detecting HBsAg in the clinical diagnosis. In addition, the multilayer films also showed better stability for 1 month at least.     

A chemiluminescent metalloimmunoassay based on copper‐enhanced gold nanoparticles for quantification of human growth hormone

A chemiluminescence (CL) immunoassay was developed to determine human growth hormone (hGH) based on copper‐enhanced gold nanoparticles. In this method, gold nanoparticles were deposited on polystyrene wells for adsorption of human growth antibodies as well as catalyst for reducing of copper ions from the copper enhancer solution. The reduction of copper ions was prevented where the gold nanoparticles were covered by the antibody–antigen immunocomplex. The deposited copper on Au nanoparticles was then dissolved in HNO₃ solution and quantified using the CL method. The CL intensity response was logarithmically dependent on the hGH concentrations over the range 0.2–50 ng/mL, with a detection limit (3σ) of 0.036 ng/mL. Copyright © 2012 John Wiley & Sons, Ltd.     

Preparation of novel mercury-doped silver nanoparticles film glassy carbon electrode and its application for electrochemical biosensor

A novel mercury-doped silver nanoparticles film glassy carbon (Ag/MFGC) electrode was prepared in this study. Electrochemical behaviors of cysteine on the Ag/MFGC electrode were investigated by electrochemical impedance spectroscopy and cyclic voltammetry (CV). The results indicated that cysteine could be strongly adsorbed on the surface of the Ag/MFGC electrode to form a thin layer. The doped electrode could catalyze the electrode reaction process of cysteine, and the cysteine displayed a pair of well-defined and nearly reversible CV peaks at the electrode in an acetate buffer solution (pH 5.0). The Ag/MFGC electrode was used for determination of cysteine by differential pulse voltammetry. The linear range was between 4.0x10(-7) and 1.3x10(-5) mol/L, with a detection limit of 1.0x10(-7) mol/L and a signal-to-noise ratio of 3. The relative standard deviation was 2.4% for seven successive determinations of 1.0x10(-5) mol/L cysteine. The determinations of cysteine in synthetic samples and urinal samples were carried out and satisfactory results were obtained. Amperometric application of the Ag/MFGC electrode as biosensors is proposed.     

Protein analysis with tetra-substituted sulfonated cobalt phthalocyanine by the technique of Rayleigh light scattering

This is the first report of cobalt-tetrasulfonatophthalocyanine (CoTSPc) as a probe of Rayleigh light scattering (RLS) to determine proteins at nanogram levels. A highly sensitive method has been developed for the determination of proteins by the light scattering technique on a common spectrofluorimeter, based on the fact that the weak RLS of CoTSPc can be greatly enhanced in the presence of proteins. Under optimum conditions, the linear ranges of the calibration curves were 0.10-34.3 microg x mL(-1) for both human serum albumin and bovine serum albumin, with detection limits of 15.5 and 13.9 ng x mL(-1), respectively. Moreover, there is almost no interference of any amino acids and metal ions. The method has been applied to the direct determination of total proteins in human serum samples, and the results were satisfactory with clinical data provided.     

Synthesis of chitosan-stabilized gold nanoparticles in the absence/presence of tripolyphosphate

Gold nanoparticles were prepared by reducing gold salt with a polysaccharide, chitosan, in the absence/presence of tripolyphosphate (TPP). Here, chitosan acted as a reducing/stabilizing agent. The obtained gold nanoparticles were characterized with UV--vis spectroscopy and transmission electron microscopy. The results indicated that the shape and size distribution of gold nanoparticles changed with the molecular weight and concentration of chitosan. More interestingly, the gelation of chitosan upon contacting with polyanion (TPP) can also affect the shape and size distribution of gold nanoparticles. By adding TPP to chitosan solution before the reduction of gold salt, gold nanoparticles have a bimodal size distribution, and at the same time, polygonal gold particles were obtained in addition to spherical gold nanoparticles.     

Polarization-Dependent Resonance Light Scattering of Biomolecular Layer Coated Gold Nanoshell

Polarization-dependent resonance light scattering (RLS) of biomolecular layer coated gold nanoshell are investigated theoretically by means of the quasistatic approximation. Both the intensity and wavelength of RLS are sensitive to the azimuth angle and can be tuned by altering the core dielectric constant and biomolecular layer thickness. In the direction parallel to the incident polarization, RLS could be enhanced by decreasing the core dielectric constant or increasing the layer thickness whereas, in the direction perpendicular to the incident polarization, the RLS is only sensitive to the core dielectric constant. The variation of RLS corresponding to the changing of biomolecular layer thickness also greatly depends on the polarization. The variation of RLS intensity always reaches its maximum when the azimuth angle is 0 and can be improved by increasing the gold shell thickness or decreasing the core dielectric constant. However, the variation of RLS wavelength always reaches its maximum when the azimuth angle is between 0 and π/2 and can be improved by decreasing the gold shell thickness or core dielectric constant. This optimization of polarization-dependent RLS response of gold nanoshell to the biocoating is potentially useful in biosensing applications.     

Determination of nucleic acids based on the quenching effect on resonance light scattering of the Y(III)-1,6-bi(1'-phenyl-3'-methyl-5'-pyrazolone-4'-)hexane-dione system.

Nucleic acids can quench resonance light scattering (RLS) intensity of the Y(III)-1,6-bi(1'-phenyl-3'-methyl-5'-pyrazolone-4'-)hexane-dione(BPMPHD) complex in the pH range 5.0-5.8. Under optimal conditions, there are linear relationships between the quenching of RLS and the concentration of nucleic acids in the range 6.3 x 10(-8)-2.1 x 10(-5) g/mL for fish sperm DNA (fsDNA), 1.2 x 10(-8)-5.0 x 10(-5) g/mL for calf thymus DNA (ctDNA) and 6.0 x 10(-8)-2.0 x 10(-5) g/mL for yeast RNA (yRNA). The detection limits (3 s) of fsDNA, ctDNA and yRNA are 0.7 ng/mL, 3.8 ng/mL and 4.2 ng/mL, respectively.     

Flow-injection resonance light scattering detection of proteins at the nanogram level.

A resonance light scattering (RLS) detection method for protein was developed, using a flow-injection system based on the enhancement of RLS signals from Biebrich scarlet (BS) by protein. The enhanced RLS intensities at 286.0 nm, in acidic aqueous medium, were proportional to the protein concentration over the range 0.005-18 microg/mL and 0.008-16 microg/mL for human serum albumin (HSA) and bovine serum albumin (BSA), respectively, with corresponding limits of detection (3sigma) of 5.00 ng/mL for HSA, and 7.80 ng/mL for BSA. The method was successfully applied to the quantification of total proteins in human serum samples.