Designed coiled coils promote folding of a recombinant bacterial collagen

Collagen triple helices fold slowly and inefficiently, often requiring adjacent globular domains to assist this process. In the Streptococcus pyogenes collagen-like protein Scl2, a V domain predicted to be largely α-helical, occurs N-terminal to the collagen triple helix (CL). Here, we replace this natural trimerization domain with a de novo designed, hyperstable, parallel, three-stranded, α-helical coiled coil (CC), either at the N terminus (CC-CL) or the C terminus (CL-CC) of the collagen domain. CD spectra of the constructs are consistent with additivity of independently and fully folded CC and CL domains, and the proteins retain their distinctive thermal stabilities, CL at ～37 °C and CC at >90 °C. Heating the hybrid proteins to 50 °C unfolds CL, leaving CC intact, and upon cooling, the rate of CL refolding is somewhat faster for CL-CC than for CC-CL. A construct with coiled coils on both ends, CC-CL-CC, retains the ～37 °C thermal stability for CL but shows less triple helix at low temperature and less denaturation at 50 °C. Most strikingly however, in CC-CL-CC, the CL refolds slower than in either CC-CL or CL-CC by almost two orders of magnitude. We propose that a single CC promotes folding of the CL domain via nucleation and in-register growth from one end, whereas initiation and growth from both ends in CC-CL-CC results in mismatched registers that frustrate folding. Bioinformatics analysis of natural collagens lends support to this because, where present, there is generally only one coiled-coil domain close to the triple helix, and it is nearly always N-terminal to the collagen repeat.     

Folding delay and structural perturbations caused by type IV collagen natural interruptions and nearby Gly missense mutations

The standard collagen triple helix requires Gly as every third residue in the amino acid sequence, yet all nonfibrillar collagens contain sites where this repeating pattern is interrupted. To explore the effects of such natural interruptions on the triple helix, a 4- or 15-residue sequence from human basement membrane type IV collagen was introduced between (Gly-Xaa-Yaa)(n) domains within a recombinant bacterial collagen. The interruptions had little effect on melting temperature, consistent with the high thermal stability reported for nonfibrillar collagens. Although the 4-residue interruption cannot be accommodated within a standard triple helix, trypsin and thermolysin resistance indicated a tightly packed structure. Central residues of the 15-residue interruption were protease-susceptible, whereas residues near the (Gly-Xaa-Yaa)(n) boundary were resistant, supporting a transition from an alternate conformation to a well packed triple helix. Both interruptions led to a delay in triple-helix folding, with the 15-residue interruption causing slower folding than the 4-residue interruption. These results suggest that propagation through interruptions represents a slow folding step. To clarify the relation between natural interruptions and pathological mutations, a Gly to Ser missense mutation was placed three triplets away from the 4-residue interruption. As a result of this mutation, the 4-residue interruption and nearby triple helix became susceptible to protease digestion, and an additional folding delay was observed. Because Gly missense mutations that cause disease are often located near natural interruptions, structural and folding perturbations arising from such proximity could be a factor in collagen genetic diseases.     

Interstrand dipole-dipole interactions can stabilize the collagen triple helix

The amino acid sequence of collagen is composed of GlyXaaYaa repeats. A prevailing paradigm maintains that stable collagen triple helices form when (2S)-proline (Pro) or Pro derivatives that prefer the C(γ)-endo ring pucker are in the Xaa position and Pro derivatives that prefer the C(γ)-exo ring pucker are in the Yaa position. Anomalously, an amino acid sequence in an invertebrate collagen has (2S,4R)-4-hydroxyproline (Hyp), a C(γ)-exo-puckered Pro derivative, in the Xaa position. In certain contexts, triple helices with Hyp in the Xaa position are now known to be hyperstable. Most intriguingly, the sequence (GlyHypHyp)(n) forms a more stable triple helix than does the sequence (GlyProHyp)(n). Competing theories exist for the physicochemical basis of the hyperstability of (GlyHypHyp)(n) triple helices. By synthesizing and analyzing triple helices with different C(γ)-exo-puckered proline derivatives in the Xaa and Yaa positions, we conclude that interstrand dipole-dipole interactions are the primary determinant of their additional stability. These findings provide a new framework for understanding collagen stability.     

Molecular mechanism of alpha 1(I)-osteogenesis imperfecta/Ehlers-Danlos syndrome: unfolding of an N-anchor domain at the N-terminal end of the type I collagen triple helix

We demonstrate that 85 N-terminal amino acids of the alpha1(I) chain participate in a highly stable folding domain, acting as the stabilizing anchor for the amino end of the type I collagen triple helix. This anchor region is bordered by a microunfolding region, 15 amino acids in each chain, which include no proline or hydroxyproline residues and contain a chymotrypsin cleavage site. Glycine substitutions and amino acid deletions within the N-anchor domain induce its reversible unfolding above 34 degrees C. The overall triple helix denaturation temperature is reduced by 5-6 degrees C, similar to complete N-anchor removal. N-propeptide partially restores the stability of mutant procollagen but not sufficiently to prevent N-anchor unfolding and a conformational change at the N-propeptide cleavage site. The ensuing failure of N-proteinase to cleave at the misfolded site leads to incorporation of pN-collagen into fibrils. Similar, but weaker, effects are caused by G88E substitution in the adjacent triplet, which appears to alter N-anchor structure as well. As in Ehlers-Danlos syndrome (EDS) VIIA/B, fibrils containing pN-collagen are thinner and weaker causing EDS-like laxity of large and small joints and paraspinal ligaments. However, distinct structural consequences of N-anchor destabilization result in a distinct alpha1(I)-osteogenesis imperfecta (OI)/EDS phenotype.     

Self‐association of streptococcus pyogenes collagen‐like constructs into higher order structures

A number of bacterial collagen‐like proteins with Gly as every third residue and a high Pro content have been observed to form stable triple‐helical structures despite the absence of hydroxyproline (Hyp). Here, the high yield cold‐shock expression system is used to obtain purified recombinant collagen‐like protein (V‐CL) from Streptococcus pyogenes containing an N‐terminal globular domain V followed by the collagen triple‐helix domain CL and the modified construct with two tandem collagen domains V‐CL‐CL. Both constructs and their isolated collagenous domains form stable triple‐helices characterized by very sharp thermal transitions at 35–37°C and by high values of calorimetric enthalpy. Procedures for the formation of collagen SLS crystallites lead to parallel arrays of in register V‐CL‐CL molecules, as well as centrosymmetric arrays of dimers joined at their globular domains. At neutral pH and high concentrations, the bacterial constructs all show a tendency towards aggregation. The isolated collagen domains, CL and CL‐CL, form units of diameter 4–5 nm which bundle together and twist to make larger fibrillar structures. Thus, although this S. pyogenes collagen‐like protein is a cell surface protein with no indication of participation in higher order structure, the triple‐helix domain has the potential of forming fibrillar structures even in the absence of hydroxyproline. The formation of fibrils suggests bacterial collagen proteins may be useful for biomaterials and tissue engineering applications.     

The crucial role of trimerization domains in collagen folding

Collagens contain large numbers of Gly-Xaa-Yaa peptide repeats that form the characteristic triple helix, where the individual chains fold into a polyproline II helix and three of these helices form a right-handed triple helix. For the proper folding of the triple helix collagens contain trimerization domains. These domains ensure a single starting point for triple helix formation and are also responsible for the chain selection in heterotrimeric collagens. Trimerization domains are non-collagenous domains of very different structures. The size of trimerization domains varies from 35 residues in type IX collagen to around 250 residues for the fibrillar collagens. These domains are not only crucial for biological functions, but they are also attractive tools for generating recombinant collagen fragments of interest as well as for general use in protein engineering and biomaterial design. Here we review the current knowledge of the structure and function of these trimerization domains.     

On the role of some conserved and nonconserved amino acid residues in the transitional state and intermediate of apomyoglobin folding

The contributions of some amino acid residues in the A, B, G, and H helices to the formation of the folding nucleus and folding intermediate of apomyoglobin were estimated. The effects of point substitutions of Ala for hydrophobic amino acid residues on the structural stability of the native (N) protein and its folding intermediate (I), as well as on the folding/unfolding rates for four mutant apomyoglobin forms, were studied. The equilibrium and kinetic studies of the folding/unfolding rates of these mutant proteins in a wide range of urea concentrations demonstrated that their native state was considerably destabilized as compared with the wild-type protein, whereas the stability of the intermediate state changed moderately. It was shown that the amino acid residues in the A, G, and H helices contributed insignificantly to the stabilization of the apomyoglobin folding nucleus in the rate-limiting I ? N transition, taking place after the formation of the intermediate, whereas the residue of the B helix was of great importance in the formation of the folding nucleus in this transition.     

Noncollagenous region of the streptococcal collagen‐like protein is a trimerization domain that supports refolding of adjacent homologous and heterologous collagenous domains

Proper folding of the (Gly‐Xaa‐Yaa)_n sequence of animal collagens requires adjacent N‐ or C‐terminal noncollagenous trimerization domains which often contain coiled‐coil or beta sheet structure. Collagen‐like proteins have been found recently in a number of bacteria, but little is known about their folding mechanism. The Scl2 collagen‐like protein from Streptococcus pyogenes has an N‐terminal globular domain, designated V_sp, adjacent to its triple‐helix domain. The V_sp domain is required for proper refolding of the Scl2 protein in vitro. Here, recombinant V_sp domain alone is shown to form trimers with a significant α‐helix content and to have a thermal stability of T_m = 45°C. Examination of a new construct shows that the V_sp domain facilitates efficient in vitro refolding only when it is located N‐terminal to the triple‐helix domain but not when C‐terminal to the triple‐helix domain. Fusion of the V_sp domain N‐terminal to a heterologous (Gly‐Xaa‐Yaa)_n sequence from Clostridium perfringens led to correct folding and refolding of this triple‐helix, which was unable to fold into a triple‐helical, soluble protein on its own. These results suggest that placement of a functional trimerization module adjacent to a heterologous Gly‐Xaa‐Yaa repeating sequence can lead to proper folding in some cases but also shows specificity in the relative location of the trimerization and triple‐helix domains. This information about their modular nature can be used in the production of novel types of bacterial collagen for biomaterial applications.     

Total chemical synthesis of the B1 domain of protein L from Peptostreptococcus magnus

Reported here is a native chemical ligation strategy for the total chemical synthesis of the B1 domain of protein L. A synthetic construct of this 76 amino acid protein domain was prepared by the chemoselective ligation of two unprotected polypeptide fragments, one containing an N-terminal cysteine residue and one containing a C-terminal thioester moiety. The polypeptide fragments utilized in the ligation reaction were readily prepared by stepwise solid phase peptide synthesis (SPPS) methods for Boc-chemistry. The milligram quantities of protein required for conventional biophysical studies were readily accessible using the synthetic protocol described here. The folding properties of the synthetic protein L construct were also determined and found to be very similar to those of a similar wild-type protein L constructs prepared by recombinant-DNA methods. This work facilitates future unnatural amino acid mutagenesis experiments on this model protein system to further dissect the molecular basis of its folding and stability.     

Collagen model peptides: Sequence dependence of triple-helix stability

The triple helix is a specialized protein motif, found in all collagens as well as in noncollagenous proteins involved in host defense. Peptides will adopt a triple-helical conformation if the sequence contains its characteristic features of Gly as every third residue and a high content of Pro and Hyp residues. Such model peptides have proved amenable to structural studies by x-ray crystallography and NMR spectroscopy, suitable for thermodynamic and kinetic analysis, and a valuable tool in characterizing the binding activities of the collagen triple helix. A systematic approach to understanding the amino acid sequence dependence of the collagen triple helix has been initiated, based on a set of host-guest peptides of the form, (Gly-Pro-Hyp)(3)-Gly-X-Y-(Gly-Pro-Hyp)(4). Comparison of their thermal stabilities has led to a propensity scale for the X and Y positions, and the additivity of contributions of individual residues is now under investigation. The local and global stability of the collagen triple helix is normally modulated by the residues in the X and Y positions, with every third position occupied by Gly in fibril-forming collagens. However, in collagen diseases, such as osteogenesis imperfecta, a single Gly may be substituted by another residue. Host-guest studies where the Gly is replaced by various amino acids suggest that the identity of the residue in the Gly position affects the degree of destabilization and the clinical severity of the disease.     

The Self-assembly of a Mini-fibril with Axial Periodicity from a Designed Collagen-mimetic Triple Helix

In this work we describe the self-assembly of a collagen-like periodic mini-fibril from a recombinant triple helix. The triple helix, designated Col108, is expressed in Escherichia coli using an artificial gene and consists of a 378-residue triple helix domain organized into three pseudo-repeating sequence units. The peptide forms a stable triple helix with a melting temperature of 41 °C. Upon increases of pH and temperature, Col108 self-assembles in solution into smooth mini-fibrils with the cross-striated banding pattern typical of fibrillar collagens. The banding pattern is characterized by an axially repeating feature of ∼35 nm as observed by transmission electron microscopy and atomic force microscopy. Both the negatively stained and the positively stained transmission electron microscopy patterns of the Col108 mini-fibrils are consistent with a staggered arrangement of triple helices having a staggering value of 123 residues, a value closely connected to the size of one repeat sequence unit. A mechanism is proposed for the mini-fibril formation of Col108 in which the axial periodicity is instigated by the built-in sequence periodicity and stabilized by the optimized interactions between the triple helices in a 1-unit staggered arrangement. Lacking hydroxyproline residues and telopeptides, two factors implicated in the fibrillogenesis of native collagen, the Col108 mini-fibrils demonstrate that sequence features of the triple helical domain alone are sufficient to “code” for axially repeating periodicity of fibrils. To our knowledge, Col108 is the first designed triple helix to self-assemble into periodic fibrils and offers a unique opportunity to unravel the specific molecular interactions of collagen fibrillogenesis.     

Proline residues in transmembrane alpha helices affect the folding of bacteriorhodopsin

Proline residues occur frequently in transmembrane alpha helices, which contrasts with their behaviour as helix-breakers in water-soluble proteins. The three membrane-embedded proline residues of bacteriorhodopsin have been replaced individually by alanine and glycine to give P50A, or P50G on helix B, P91A, or P91G on helix C, and P186A or P186G on helix F, and the effect on the protein folding kinetics has been investigated. The rate-limiting apoprotein folding step, which results in formation of a seven transmembrane, alpha helical state, was slower than wild-type protein for the Pro50 and Pro91 mutants, regardless of whether they were mutated to Ala or Gly. These proline residues give rise to several inter-helix contacts, which are therefore important in folding to the seven transmembrane helix state. No evidence for cis-trans isomerisations of the peptidyl prolyl bonds was found during this rate-limiting apoprotein folding step. Mutations of all three membrane-embedded proline residues affected the subsequent retinal binding and final folding to bacteriorhodopsin, suggesting that these proline residues contribute to formation of the retinal binding pocket within the helix bundle, again via helix/helix interactions. These results point to proline residues in transmembrane alpha helices being important in the folding of integral membrane proteins. The helix/helix interactions and hydrogen bonds that arise from the presence of proline residues in transmembrane alpha helices can affect the formation of transmembrane alpha helix bundles as well as cofactor binding pockets.     

Vascular Ehlers-Danlos Syndrome Mutations in Type III Collagen Differently Stall the Triple Helical Folding

Vascular Ehlers-Danlos syndrome (EDS) type IV is the most severe form of EDS. In many cases the disease is caused by a point mutation of Gly in type III collagen. A slower folding of the collagen helix is a potential cause for over-modifications. However, little is known about the rate of folding of type III collagen in patients with EDS. To understand the molecular mechanism of the effect of mutations, a system was developed for bacterial production of homotrimeric model polypeptides. The C-terminal quarter, 252 residues, of the natural human type III collagen was attached to (GPP)₇ with the type XIX collagen trimerization domain (NC2). The natural collagen domain forms a triple helical structure without 4-hydroxylation of proline at a low temperature. At 33 °C, the natural collagenous part is denatured, but the C-terminal (GPP)₇-NC2 remains intact. Switching to a low temperature triggers the folding of the type III collagen domain in a zipper-like fashion that resembles the natural process. We used this system for the two known EDS mutations (Gly-to-Val) in the middle at Gly-910 and at the C terminus at Gly-1018. In addition, wild-type and Gly-to-Ala mutants were made. The mutations significantly slow down the overall rate of triple helix formation. The effect of the Gly-to-Val mutation is much more severe compared with Gly-to-Ala. This is the first report on the folding of collagen with EDS mutations, which demonstrates local delays in the triple helix propagation around the mutated residue.     

Low temperature dynamic mapping reveals unexpected order and disorder in troponin

Troponin is a pivotal regulatory protein that binds Ca(2+) reversibly to act as the muscle contraction on-off switch. To understand troponin function, the dynamic behavior of the Ca(2+)-saturated cardiac troponin core domain was mapped in detail at 10 °C, using H/D exchange-mass spectrometry. The low temperature conditions of the present study greatly enhanced the dynamic map compared with previous work. Approximately 70% of assessable peptide bond hydrogens were protected from exchange sufficiently for dynamic measurement. This allowed the first characterization by this method of many regions of regulatory importance. Most of the TnI COOH terminus was protected from H/D exchange, implying an intrinsically folded structure. This region is critical to the troponin inhibitory function and has been implicated in thin filament activation. Other new findings include unprotected behavior, suggesting high mobility, for the residues linking the two domains of TnC, as well as for the inhibitory peptide residues preceding the TnI switch helix. These data indicate that, in solution, the regulatory subdomain of cardiac troponin is mobile relative to the remainder of troponin. Relatively dynamic properties were observed for the interacting TnI switch helix and TnC NH(2)-domain, contrasting with stable, highly protected properties for the interacting TnI helix 1 and TnC COOH-domain. Overall, exchange protection via protein folding was relatively weak or for a majority of peptide bond hydrogens. Several regions of TnT and TnI were unfolded even at low temperature, suggesting intrinsic disorder. Finally, change in temperature prominently altered local folding stability, suggesting that troponin is an unusually mobile protein under physiological conditions.     

Dissecting α-helices: Position-specific analysis of α-helices in globular proteins

An analysis of the amino acid distributions at 15 positions, viz., N“, N′, Ncap, N1, N2, N3, N4, Mid, C4, C3, C2, C1, Ccap, C′, and C” in 1,131 α-helices reveals that each position has its own unique characteristics. In general, natural helix sequences optimize by identifying the residues to be avoided at a given position and minimizing the occurrence of these avoided residues rather than by maximizing the preferred residues at various positions. Ncap is most selective in its choice of residues, with six amino acids (S, D, T, N, G, and P) being preferred at this position and another 11 (V, I, F, A, K, L, Y, R, E, M, and Q) being strongly avoided. Ser, Asp, and Thr are all more preferred at Ncap position than Asn, whose role at helix N-terminus has been highlighted by earlier analyses. Furthermore, Asn is also found to be almost equally preferred at helix C-terminus and a novel structural motif is identified, involving a hydrogen bond formed by N^δ2 of Asn at Ccap or C1 position, with the backbone carbonyl oxygen four residues inside the helix. His also forms a similar motif at the C-terminus. Pro is the most avoided residue in the main body (N4 to C4 positions) and at C-ter-minus, including Ccap of an α-helix. In 1,131 α-helices, no helix contains Pro at C3 or C2 positions. However, Pro is highly favoured at N1 and C′. The doublet X-Pro, with Pro at C′ position and extended backbone conformation for the X residue at Ccap, appears to be a common structural motif for termination of α-helices, in addition to the Schellman motif. Main body of the helix shows a high preference for aliphatic residues Ala, Leu, Val, and Ile, while these are avoided at helix termini. A propensity scale for amino acids to occur in the middle of helices has been obtained. Comparison of this scale with several previously reported scales shows that this scale correlates best with the experimentally determined values. Proteins 31:460–476, 1998. © 1998 Wiley-Liss, Inc.     

Substitutions for glycine alpha 1-637 and glycine alpha 2-694 of type I procollagen in lethal osteogenesis imperfecta. The conformational strain on the triple helix introduced by a glycine substitution can be transmitted along the helix

Two substitutions for glycine in the triple-helical domain were found in type I procollagen synthesized by skin fibroblasts from two probands with lethal osteogenesis imperfecta. One was a substitution of valine for glycine alpha 1-637, and the other was a substitution of arginine for glycine alpha 2-694. The effects of the mutations on the zipper-like folding of the collagen triple helix were similar, since there was post-translational overmodification of the collagenase A fragments (amino acids 1-775) but not of more COOH-terminal fragments of the protein. The mutations differed markedly, however, on their effects on thermal unfolding of the triple helix. The collagenase A fragment from the collagen containing the arginine alpha 2-694 substitution was cleaved at about amino acid 700 when incubated with trypsin at 30-35 degrees C. Therefore, there was micro-unfolding of the triple helix at a site close to the glycine substitution. Surprisingly, however, the collagenase A fragment with the valine alpha 1-637 substitution was also cleaved at about amino acid 700 under the same conditions. The results, therefore, demonstrated that although most glycine substitutions delay folding of the triple helix in regions that are NH2-terminal to the site of the substitution, the effects on unfolding can be transmitted to regions that are COOH-terminal to the site of the glycine substitution.     

Stabilization of short collagen-like triple helices by protein engineering

Recombinant expression of collagens and fragments of collagens is often difficult, as their biosynthesis requires specific post-translational enzymes, in particular prolyl 4-hydroxylase. Although the use of hydroxyproline-deficient variants offers one possibility to overcome this difficulty, these proteins usually differ markedly in stability when compared with the hydroxyproline-containing analogs. Here, we report a method to stabilize collagen-like peptides by fusing them to the N terminus of the bacteriophage T4 fibritin foldon domain. The isolated foldon domain and the chimeric protein (GlyProPro)(10)foldon were expressed in a soluble form in Escherichia coli. The recombinant proteins and the synthetic (ProProGly)(10) peptide were characterized by circular dichroism (CD) spectroscopy, differential scanning calorimetry, and analytical ultracentrifugation. We show that the foldon domain, which comprises only 27 amino acid residues, forms an obligatory trimer with a high degree of thermal stability. The CD thermal unfolding profiles recorded from foldon are monophasic and completely reversible upon cooling. Similar Van't Hoff and calorimertic enthalpy values of trimer formation indicated a cooperative all-or-none transition. As reported previously, (ProProGly)(10) peptides form collagen triple helices of only moderate stability. When fused to the foldon domain, however, triple helix formation of (GlyProPro)(10) is concentration independent, and the midpoint temperature of the triple helix unfolding is significantly increased. The stabilizing function of the trimeric foldon domain is explained by the close vicinity of its N termini, which induce a high local concentration in the range of 1 M for the C termini of the collagen-like-peptide. Collagen-foldon fusion proteins should be potentially useful to study receptor-collagen interactions.     

Amino acid sequence of the triple-helical domain of human collagen type VI

The complete amino acid sequence of the triple-helical domain of human collagen VI was deduced from sequences of appropriate cDNA clones and confirmed to about 50% by Edman degradation of tryptic peptides. This domain consists of three different peptide segments containing some 335-336 amino acid residues originating from central portions of the alpha 1 (VI), alpha 2(VI), and alpha 3(VI) chains, respectively. Sequence identity in the X/Y positions of the Gly-X-Y repeats is rather low (10-15%) between the chains. Peculiar features of these sequences include 3 cysteine residues about 50 (alpha 3(VI)) and 89 (alpha 1(VI), alpha 2(VI)) residues away from the N-terminus and several Gly-X-Y interruptions clustered in the C-terminal two-thirds of the triple helix. These structures are presumably required for cross-linking collagen VI oligomers and for super-coiling of triple helices in the dimers. Other features include 11 Arg-Gly-Asp sequences, some of which are likely to be used as cell-binding sites, and four Asn-X-Thr sequences, allowing N-linked glycosylation along the triple helix. Junctional areas close to the helix contain short, cysteine-rich segments which may seal the triple-helical domain through disulfide bond formation, endowing it with high stability. These features, together with a low sequence homology to fiber-forming and basement-membrane collagens, document the unique character of collagen VI, whose triple helix is specifically adjusted for forming microfibrils in tissues.     

The NC2 Domain of Collagen IX Provides Chain Selection and Heterotrimerization

The mechanism of chain selection and trimerization of fibril-associated collagens with interrupted triple helices (FACITs) differs from that of fibrillar collagens that have special C-propeptides. We recently showed that the second carboxyl-terminal non-collagenous domain (NC2) of homotrimeric collagen XIX forms a stable trimer and substantially stabilizes a collagen triple helix attached to either end. We then hypothesized a general trimerizing role for the NC2 domain in other FACITs. Here we analyzed the NC2 domain of human heterotrimeric collagen IX, the only member of FACITs with all three chains encoded by distinct genes. Upon oxidative folding of equimolar amounts of the α1, α2, and α3 chains of NC2, a stable heterotrimer with a disulfide bridge between α1 and α3 chains is formed. Our experiments show that this heterotrimerization domain can stabilize a short triple helix attached at the carboxyl-terminal end and allows for the proper oxidation of the cystine knot of type III collagen after the short triple helix.     

Transformation of the mechanism of triple-helix peptide folding in the absence of a C-terminal nucleation domain and its implications for mutations in collagen disorders

Folding abnormalities of the triple helix have been demonstrated in collagen diseases such as osteogenesis imperfecta in which the mutation leads to the substitution of a single Gly in the (Gly-X-Y)n sequence pattern by a larger residue. Model peptides can be used to clarify the details of normal collagen folding and the consequences of the interruption of that folding by a Gly substitution. NMR and CD studies show that placement of a (GPO)4 nucleation domain at the N terminus rather than the C terminus of a native collagen sequence allows the formation of a stable triple helix but alters the folding mechanism. Although C- to N-terminal directional folding occurs when the nucleation domain is at the C terminus, there is no preferential folding direction when the nucleation domain is at the N terminus. The lack of zipper-like directional folding does not interfere with triple-helix formation, and when a Gly residue is replaced by Ser to model an osteogenesis imperfecta mutation, the peptide with the N-terminal (GPO)4 domain can still form a good triple helix N-terminal to the mutation site. These peptide studies raise the possibility that mutant collagen could fold in a C to N direction in a zipper-like manner up to the mutation site and that completion of the triple helix N-terminal to the mutation would involve an alternative mechanism.