A study of lamellas of the web recombinant protein by atomic force microscopy

Lamellas formed on the mica by protein 1F9, a recombinant analogue of the web protein, have been studied by atomic force microscopy. It has been shown that the molecules of 1F9 dissolved in strong solvents are capable of aggregating on the mica surface to form lamellas less than 1 nm in height and more than 1 microm in length. A model of a plane zigzag has been constructed to describe the conformation of 1F9 molecules on the mica surface.     

Normal and frictional interactions of purified human statherin adsorbed on molecularly-smooth solid substrata

Human salivary statherin was purified from parotid saliva and adsorbed to bare hydrophilic (HP) mica and STAI-coated hydrophobic (HB) mica in a series of Surface Force Balance experiments that measured the normal (F(n)) and friction forces (F(s)*) between statherin-coated mica substrata. Readings were taken both in the presence of statherin solution (HP and HB mica) and after rinsing (HP mica). F(n) measurements showed, for both substrata, monotonic steric repulsion that set on at a surface separation D ~20 nm, indicating an adsorbed layer whose unperturbed thickness was ca 10 nm. An additional longer-ranged repulsion, probably of electrostatic double-layer origin, was observed for rinsed surfaces under pure water. Under applied pressures of ~1 MPa, each surface layer was compressed to a thickness of ca 2 nm on both types of substratum, comparable with earlier estimates of the size of the statherin molecule. Friction measurements, in contrast with F(n) observations, were markedly different on the two different substrata: friction coefficients, μ ≡ ?F(s)*/?F(n), on the HB substratum (μ ≈ 0.88) were almost an order of magnitude higher than on the HP substratum (μ ≈ 0.09 and 0.12 for unrinsed and rinsed, respectively), and on the HB mica there was a lower dependence of friction on sliding speed than on the HP mica. The observations were attributed to statherin adsorbing to the mica in multimer aggregates, with internal re-arrangement of the protein molecules within the aggregate dependent on the substratum to which the aggregate adsorbed. This internal re-arrangement permitted aggregates to be of similar size on HP and HB mica but to have different internal molecular orientations, thus exposing different moieties to the solution in each case and accounting for the very different friction behaviour.     

Direct real‐time imaging of protein adsorption onto hydrophilic and hydrophobic surfaces

Atomic force microscopy has been used to follow in real time the adsorption from solution of two of the gliadin group of wheat seed storage proteins onto hydrophilic (mica) and hydrophobic (graphite) surfaces. The liquid cell of the microscope was used initially to acquire images of the substrate under a small quantity of pure solvent (1% acetic acid). Continuous imaging as an injection of gliadin solution entered the liquid cell enabled the adsorption process to be followed in situ from zero time. For ω‐gliadin, a monolayer was formed on the mica substrate during a period of ～2000 s, with the protein molecules oriented in parallel to the mica surface. In contrast, the ω‐gliadin had a relatively low affinity for the graphite substrate, as demonstrated by slow and weak adsorption to the surface. With γ‐gliadin, random deposition onto the mica surface was observed forming monodispersed structures, whereas on the graphite surface, monolayer islands of protein were formed with the protein molecules in a perpendicular orientation. Sequential adsorption experiments indicated strong interactions between the two proteins that, under certain circumstances, caused alterations to the surface morphologies of preadsorbed species. The results are relevant to our understanding of the interactions of proteins within the hydrated protein bodies of wheat grain and how these determine the processing properties of wheat gluten and dough. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 74–84, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Influence of surface and protein modification on immunoglobulin G adsorption observed by scanning force microscopy.

Scanning force microscopy has been used successfully to produce images of individual protein molecules. However, one of the problems with this approach has been the high mobility of the proteins caused by the interaction between the sample and the scanning tip. To stabilize the proteins we have modified the adsorption properties of immunoglobulin G on graphite and mica surfaces. We have used two approaches: first, we applied glow discharge treatment to the surface to increase the hydrophilicity, favoring adhesion of hydrophilic protein molecules; second, we used the arginine modifying reagent phenylglyoxal to increase the protein hydrophobicity and thus enhance its adherence to hydrophobic surfaces. We used scanning force microscopy to show that the glow discharge treatment favors a more homogeneous distribution and stronger adherence of the protein molecules to the graphite surface. Chemical modification of the immunoglobulin caused increased aggregation of the proteins on the surface but did not improve the adherence to graphite. On mica, clusters of modified immunoglobulins were also observed and their adsorption was reduced. These results underline the importance of the surface hydrophobicity and charge in controlling the distribution of proteins on the surface.     

S-DNA, over-supercoiled DNA with a 1.94-to 2.19-Å rise per base pair

Supercoiled 3993-bp pGEMEX DNA immobilized on four substrates (freshly cleaved mica, standard amino mica, and modified amino mica with an increased or decreased surface charge density in comparison to standard amino mica) has been visualized by atomic force microscopy in the air. Plectonomically supercoiled DNA molecules, as well as single molecules with an extremely high compaction level (i.e., with a significantly higher superhelix density compared to those previously observed experimentally or estimated theoretically), have been visualized on modified amino mica with an increased surface charge density. The distance between nucleotide pairs along the duplex axis has been determined by measuring the contour length of individual oversupercoiled DNA molecules. The estimated rise per base pair varies from 1.94 to 2.19 Å. These supercoiled DNA molecules, which are compressed like a spring and have a decreased rise per base pair compared to previously known DNA forms are considered to be a new form of DNA, S-DNA. A model of S-DNA has been constructed. Molecules of S-DNA may be an intermediate in the course of the compaction of single supercoiled DNA molecules into spheroids and minitoroids. The DNA oversupercoiling, followed by the compression of the supercoiled molecules, has been shown to be accounted for by a high surface charge density of amino mica on which DNA molecules are immobilized.     

Correlation between surface morphology and surface forces of protein A adsorbed on mica.

We have investigated the morphology and surface forces of protein A adsorbed on mica surface in the protein solutions of various concentrations. The force-distance curves, measured with a surface force apparatus (SFA), were interpreted in terms of two different regimens: a "large-distance" regimen in which an electrostatic double-layer force dominates, and an "adsorbed layer" regimen in which a force of steric origin dominates. To further clarify the forces of steric origin, the surface morphology of the adsorbed protein layer was investigated with an atomic force microscope (AFM) because the steric repulsive forces are strongly affected by the adsorption mode of protein A molecules on mica. At lower protein concentrations (2 ppm, 10 ppm), protein A molecules were adsorbed "side-on" parallel to the mica surfaces, forming a monolayer of approximately 2.5 nm. AFM images at higher concentrations (30 ppm, 100 ppm) showed protruding structures over the monolayer, which revealed that the adsorbed protein A molecules had one end oriented into the solution, with the remainder of each molecule adsorbed side-on to the mica surface. These extending ends of protein A overlapped each other and formed a "quasi-double layer" over the mica surface. These AFM images proved the existence of a monolayer of protein A molecules at low concentrations and a "quasi-double layer" with occasional protrusions at high concentrations, which were consistent with the adsorption mode observed in the force-distance curves.     

Study of the DNA/ethidium bromide interactions on mica surface by atomic force microscope: influence of the surface friction

The influence of mica surface on DNA/ethidium bromide interactions is investigated by atomic force microscopy (AFM). We describe the diffusion mechanism of a DNA molecule on a mica surface by using a simple analytical model. It appears that the DNA diffusion on a mica surface is limited by the surface friction due to the counterion correlations between the divalent counterions condensed on both mica and DNA surfaces. We also study the structural changes of linear DNA adsorbed on mica upon ethidium bromide binding by AFM. It turns out that linear DNA molecules adsorbed on a mica surface are unable to relieve the topological constraint upon ethidium bromide binding. In particular, strongly adsorbed molecules tend to be highly entangled, while loosely bound DNA molecules appear more extended with very few crossovers. Adsorbed DNA molecules cannot move freely on the surface because of the surface friction. Therefore, the topological constraint increases due to the ethidium bromide binding. Moreover, we show that ethidium bromide has a lower affinity for strongly bound molecules due to the topological constraint induced by the surface friction.     

Compaction of single supercoiled DNA molecules adsorbed onto amino mica

A model of possible conformational transitions of supercoiled DNA in vitro in the absence of proteins under the conditions of increasing degree of compaction was developed. A 3993-bp pGEMEX supercoiled DNA immobilized on various substrates (freshly cleaved mica, standard amino mica, and modified amino mica with a hydrophobicity higher than that of standard amino mica) was visualized by atomic force microscopy in air. On the modified amino mica, which has an increased density of surface positive charges, single molecules with an extremely high degree of compaction were visualized in addition to plectonemic DNA molecules. As the degree of DNA supercoiling increased, the length of the first-order superhelical axis of molecules decreased from 570 to 370 nm, followed by the formation of second-and third-order superhelical axes about 280 and 140 nm long, respectively. The compaction of molecules ends with the formation of minitoroids about 50 nm in diameter and molecules of spherical shape. It was shown that the compaction of single supercoiled DNA molecules immobilized on amino mica to the level of minitoroids and spheroids is due to the shielding of mutually repulsing negatively charged phosphate groups of DNA by positively charged amino groups of the amino mica, which has a high charge density of its surface.     

Compaction of single supercoiled DNA molecules adsorbed onto amino mica

A model of possible conformational transitions of supercoiled DNA in vitro in the absence of proteins under the conditions of increasing degree of compaction was developed. A 3993-bp pGEMEX supercoiled DNA immobilized on various substrates (freshly cleaved mica, standard amino mica, and modified amino mica with a hydrophobicity higher than that of standard amino mica) was visualized by atomic force microscopy in air. On the modified amino mica, which has an increased density of surface positive charges, single molecules with an extremely high degree of compaction were visualized in addition to plectonemic DNA molecules. As the degree of DNA supercoiling increased, the length of the first-order superhelical axis of molecules decreased from 570 to 370 nm, followed by the formation of second- and third-order superhelical axes about 280 and 140 nm long, respectively. The compaction of molecules ends with the formation of minitoroids about 50 nm in diameter and molecules of spherical shape. It was shown that the compaction of single supercoiled DNA molecules immobilized on amino mica to the level of minitoroids and spheroids is due to the shielding of mutually repulsing negatively charged phosphate groups of DNA by positively charged amino groups of the amino mica, which has a high charge density of its surface.     

Atomic force microscopy of oriented linear DNA molecules labeled with 5nm gold spheres.

The atomic force microscope (AFM;1) can image DNA and RNA in air and under solutions at resolution comparable to that obtained by electron microscopy (EM) (2-7). We have developed a method for depositing and imaging linear DNA molecules to which 5nm gold spheres have been attached. The gold spheres facilitate orientation of the DNA molecules on the mica surface to which they are absorbed and are potentially useful as internal height standards and as high resolution gene or sequence specific tags. We show that by modulating their adhesion to the mica surface, the gold spheres can be moved with some degree of control with the scanning tip.     

Regiospecific orientation of single-chain antibody and atomic force microscope (AFM) images

An antibody containing a genetically engineered lipid group at the N-terminus and a hexahistidinyl tag at the C-terminus (Lpp-scFv-His6) was immobilized in an oriented manner on the surface of liposomes. Liposomes, consisting of antibody and phosphatidylcholine, have been prepared and imaged by AFM. For AFM visualization, the resulting liposomes were bound on the surface of mica by two different mechanisms. The histidine tags present in the antibody molecules of the immunoliposome were anchored to the NiCl₂ treated mica surface. Alternatively, the immunoliposomes were immunochemically bound on antigen-coated mica surface. Both approaches yielded liposomes which were clearly imaged without damage by AFM in ambient condition.     

Adsorption of DNA to mica mediated by divalent counterions: a theoretical and experimental study

The adsorption of DNA molecules onto a flat mica surface is a necessary step to perform atomic force microscopy studies of DNA conformation and observe DNA-protein interactions in physiological environment. However, the phenomenon that pulls DNA molecules onto the surface is still not understood. This is a crucial issue because the DNA/surface interactions could affect the DNA biological functions. In this paper we develop a model that can explain the mechanism of the DNA adsorption onto mica. This model suggests that DNA attraction is due to the sharing of the DNA and mica counterions. The correlations between divalent counterions on both the negatively charged DNA and the mica surface can generate a net attraction force whereas the correlations between monovalent counterions are ineffective in the DNA attraction. DNA binding is then dependent on the fractional surface densities of the divalent and monovalent cations, which can compete for the mica surface and DNA neutralizations. In addition, the attraction can be enhanced when the mica has been pretreated by transition metal cations (Ni(2+), Zn(2+)). Mica pretreatment simultaneously enhances the DNA attraction and reduces the repulsive contribution due to the electrical double-layer force. We also perform end-to-end distance measurement of DNA chains to study the binding strength. The DNA binding strength appears to be constant for a fixed fractional surface density of the divalent cations at low ionic strength (I < 0.1 M) as predicted by the model. However, at higher ionic strength, the binding is weakened by the screening effect of the ions. Then, some equations were derived to describe the binding of a polyelectrolyte onto a charged surface. The electrostatic attraction due to the sharing of counterions is particularly effective if the polyelectrolyte and the surface have nearly the same surface charge density. This characteristic of the attraction force can explain the success of mica for performing single DNA molecule observation by AFM. In addition, we explain how a reversible binding of the DNA molecules can be obtained with a pretreated mica surface.     

Molecular Forces for the Binding and Condensation of DNA Molecules

Atomic force microscopy has been used to investigate the binding between a double-stranded DNA and bilayers of cationic lipids and zwitterionic lipids in low ionic-strength solutions. The binding of a DNA molecule to freshly cleaved mica surface in solution has also been measured. The binding of DNA molecules to cationic lipid bilayers has a minimal strength of ∼45 pN. On zwitterionic lipid bilayers and mica surface, the minimal binding strength is approximately twice that value. The binding also has a dynamic nature, with only a certain percentage of recorded force curves containing the binding characteristics. Divalent Mg²⁺ ions enhance the binding by increasing that percentage without any effect on the binding strength. We have also observed a long-range attraction between DNA molecules and cationic lipid bilayers with a strength much larger than the minimum force and a range well over 50 nm, possibly related to the driving force responsible for the two-dimensional condensation of DNA.     

Controlled immobilization of DNA molecules using chemical modification of mica surfaces for atomic force microscopy: characterization in air

Immobilization of biomolecules on surfaces while keeping the maximum conformational flexibility of the molecules is one of the most important techniques for atomic force microscopy imaging. We have developed two methods of controlling adsorption of DNA molecules on mica surfaces. The first method is the use of a mica surface modified with diluted 3-aminopropyltriethoxysilane (APS). Here we named this a "diluted APS-treated mica (AP-mica)" technique. The second method is the use of a mica surface modified with mixed self-assembled monolayers of organosilanes. In both of the techniques, the number of DNA molecules immobilized on a mica surface was controlled. Further, a conformational change of circular DNA, from a supercoiled to a relaxed form was observed for the molecules immobilized on a diluted AP-mica surface, when 254-nm UV light was irradiated. This observation demonstrated that flexibility of circular DNA molecules was kept on a diluted AP-mica surface.     

S-DNA is oversupercoiled DNA with 1.94-2.19 A rise per base pair along duplex axis

Supercoiled pGEMEX DNA with length of 3993 nucleotides was immobilized on four substrates (freshly cleaved mica, standard amino mica, modified amino mica with increased and decreased surface charge density compared with standard amino mica) and it was visualized by atomic force microscopy (AFM) in air. Plectonomically supercoiled DNA molecules as well as single molecules with extremely high level of compaction (i.e. molecules with significantly higher superhelix density values on comparison with previously experimentally measured and theoretically investigated ones) were visualized on modified amino mica which was characterized by increased surface charge density. Distance between base pairs along duplex axis was determined by measurements of contour length of single oversupercoiled DNA molecules. Determined rise per base pair was varied from 1.94 to 2.19 A. These compressed supercoiled DNA molecules like a spring with decreased rise/base pair on comparison with well-known DNA forms were called new DNA form--S-DNA. A model of S-DNA was built. Formation of the S-DNA molecules was suggested to be an intermediate stage on the compaction of the single supercoiled DNA molecules up to the spheroids and minitoroids. Oversupercoiling and further compression of the supercoiled DNA molecules was shown to cause by high surface charge density of amino mica on which DNA molecules were immobilized.     

Normal and shear forces between surfaces bearing porcine gastric mucin, a high-molecular-weight glycoprotein

A surface force balance was used to measure the normal and shear forces between two mica surfaces each bearing an adsorbed layer of porcine gastric mucin ("Orthana" mucin), genetically similar to human MUC6. This mucin is a highly purified, 546 kDa, weakly negative, polyampholytic molecule with a "dumbbell" structure. Both bare (HP) and hydrophobized (HB) mica substrates were used, and forces were measured under 1 and 30 mg/mL mucin solutions, under pure (no-added-salt) water, and under 0.1 M aqueous Na(+) solution. Normal surface forces were monotonically repulsive in all cases, with onset of repulsion occurring at smaller surface separations, D, in the 0.1 M salt solutions (～ 20 nm, compared with ～40 nm for no added salt). Repulsion on HP mica was greater on surface compression than decompression, an effect, attributed to bridging and slow-relaxing additional adsorption on compression, not seen on HB mica, a difference attributed to the denser coverage of mucin hydrophobic moieties on the HB surface. Friction forces increased with compression in all cases, showing hysteretic behavior on HP but not on HB mica, commensurate with the hysteresis observed in the normal measurements. Low friction coefficients μ (= ?F(s)/?F(n) < 0.05) were seen up to mean pressures

≈ 0.5 to 1.0 MPa, attributed to low interpenetration of the opposed layers together with hydration lubrication effects, with higher μ (up to 0.4) at higher

attributed to interlayer entanglements and to bridging (for the case of HP mica). Shear forces increased only weakly with sliding speed over the range investigated (80-820 nm s(-1)). The lower friction with HB relative to HP mica suggests a selectivity of the HB surface to the hydrophobic moieties of the mucin that in consequence exposes relatively more of the better-lubricating hydrophilic groups. This surface-selectivity effect on lubrication may have a generality extending to other biological macromolecules that contain both hydrophilic and hydrophobic groups.     

Circular DNA molecules imaged in air by scanning force microscopy.

Routine and reproducible imaging of DNA molecules in air with the scanning force microscope (SFM) has been accomplished. Circular molecules of plasmid DNA were deposited onto red mica and imaged under various relative humidities. In related experiments, the first images of the Escherichia coli RNA polymerase-DNA complex have also been obtained. This has been possible by (1) the use of specially modified SFM tips with a consistent radius of curvature of 10 nm or less, to minimize the amount of image distortion introduced by the finite dimensions of commercially available tips, (2) the optimization of a method to deposit and bind DNA molecules to the mica surface in a stable fashion, and (3) careful control of the sample humidity, to prevent solvation of the molecules and detachment from the surface by the scanning tip or stylus. Contact forces in the range of a few nanonewtons are routinely possible in air and in the presence of residual humidity. The spatial resolution of the images appears determined by the radius of curvature of the modified styli, which can be estimated directly from the apparent widths of the DNA molecules in the images.     

Fate of prions in soil: adsorption kinetics of recombinant unglycosylated ovine prion protein onto mica in laminar flow conditions and subsequent desorption

Prions can be disseminated in soils. Their interaction with soil minerals is a key factor for the assessment of risks associated with the transport of their infectivity. We did not examine here the infectivity itself but the adsorption kinetics of an ovine recombinant prion protein (ovine PrPrec), as a noninfectious model protein, on muscovite mica, a phyllosilicate with surface properties analogous to soil clays, in conditions of laminar flow through a channel. The protein was labeled with (125)I, and its adsorption examined between pH 4.0 and 9.0. At wall shear rate 100 s(-1), we found the process to be controlled mainly by transport at the beginning of the adsorption process. Additional experiments at 1000 s(-1) (pH 5 and 6) determined that the diffusion coefficient was in accordance with the hydrodynamic radius measured by size exclusion chromatography. The pseudo-plateau of the interfacial concentration with time was compatible with more than a monolayer and suggests the presence of aggregates. Desorption was not observed in the presence of buffer between pH 4 and 9 and sheep plasma, while the addition of alkaline detergent or 10(-1) M NaOH allowed an almost complete removal from the interface. The ensemble of results suggests that the largely irreversible adsorption of the ovine PrPrec onto mica is mainly due to electrostatic attraction between the protein and the highly negatively charged mica surface. Possible consequences for the mode of dissemination of prion proteins in soils are indicated.     

原子力显微镜对壳聚糖分形结构的研究

利用原子力显微镜（Atomic Force Microscope,AFM)研究了壳聚糖分子在云母表面的分形聚集生长过程,并对壳聚糖分形生长的作用机理及其生长过程进行研究,发现壳聚糖分子在聚集生长过程呈传统的具有分形特征的正态分布和奇异分布。在壳聚糖聚集生长过程中,由于溶液的自然挥发,形成了云母基片中心位置的壳聚糖浓度相对较高,而周围壳聚糖的浓度相对较低的阶梯分布,因此呈现出中部的胶粒大而周围的胶粒较小的现象。AFM图像显示在云母片的中心部位壳聚糖分子聚集生长为“树”形结构而在边缘部位呈“星”形结构,这两种结构都具有典型的自相似性,壳聚糖的分形生长与其计算机模拟树形模式和DLCA模式拟合得很好。