Improved high-throughput sunflower and cotton genomic DNA extraction and PCR fidelity

The extraction of high-quality genomic DNA for PCR amplification from sunflower (Helianthus annuus) and cotton (Gossypium spp.) is challenging because of the presence of polysaccharides, secondary metabolites, and polyphenolics in the tissues. A high-throughput DNA extraction protocol was needed in our laboratory for simple sequence repeats (SSR)-marker screening and other molecular analyses that do not require organic extraction steps of phenol or chloroform. Here we describe 2 improved highthroughput protocols for DNA extraction and in-PCR modification that result in successful PCR amplification of sunflower and cotton. While the sunflower DNA extraction protocol uses reducing agents such as sodium metabisulfite and dithiothreitol (DTT), the cotton protocol uses polyvinylpyrrolidone (PVP) in PCR reactions and reducing agents in the DNA extraction procedure.     

Molecular scatology: how to improve prey DNA detection success in avian faeces?

The analysis of prey DNA in faeces is a non-invasive approach to examine the diet of birds. However, it is poorly known how gut transition time, environmental factors and laboratory treatments such as storage conditions or DNA extraction procedures affect the detection success of prey DNA. Here, we examined several of these factors using faeces from carrion crows fed with insect larvae. Faeces produced between 30 min and 4 h post-feeding tested positive for insect DNA, representing the gut transition time. Prey detection was not only possible in fresh but also in 5-day-old faeces. The type of surface the faeces were placed on for these 5 days, however, affected prey DNA detection success: samples placed on soil provided the lowest rate of positives compared to faeces left on leaves, on branches and within plastic tubes. Exposing faeces to sunlight and rain significantly lowered prey DNA detection rates (17% and 68% positives in exposed and protected samples, respectively). Storing faeces in ethanol or in the freezer did not affect molecular prey detection. Extracting DNA directly from larger pieces of faecal pellets resulted in significantly higher prey detection rates than when using small amounts of homogenized faeces. A cetyltrimethyl ammonium bromide-based DNA extraction protocol yielded significantly higher DNA detection rates (60%) than three commercial kits, however, for small amounts of homogenized faeces only. Our results suggest that collecting faeces from smooth, clean and non-absorbing surfaces, protected from sunlight and rain, improves DNA detection success in avian faeces.     

Faeces as a source of DNA for molecular studies in a threatened population of great bustards

With recent advances in molecular biology, it is now possible to use the trace amounts of DNA in faeces to non-invasively sample endangered species for genetic studies. A highly vulnerable population of approximately 100 great bustards (Otis tarda) exists in Morocco necessitating the use of non-invasive protocols to study their genetic structure. Here we report a reliable silica-based method to extract DNA from great bustard faeces. We found that successful extraction and amplification correlated strongly with faeces freshness and composition. We could not extract amplifiable DNA from 30% of our samples as they were dry or contained insect material. However 100% of our fresh faecal samples containing no obvious insect material worked, allowing us to assess the levels of genetic variation among 25 individuals using a 542 bp control region sequence. We were able to extract DNA from four out of five other avian species, demonstrating that faeces represents a suitable source of DNA for population genetics studies in a broad range of species. This revised version was published online in July 2006 with corrections to the Cover Date.     

A robust universal method for extraction of genomic DNA from bacterial species

The intactness of DNA is the keystone of genome-based clinical investigations, where rapid molecular detection of life-threatening bacteria is largely dependent on the isolation of high-quality DNA. Various protocols have been so far developed for genomic DNA isolation from bacteria, most of which have been claimed to be reproducible with relatively good yields of high-quality DNA. Nonetheless, they are not fully applicable to various types of bacteria, their processing cost is relatively high, and some toxic reagents are used. The routine protocols for DNA extraction appear to be sensitive to species diversity, and may fail to produce high-quality DNA from different species. Such protocols remain time-consuming and tedious, thus to resolve some of these impediments, we report development of a very simple, rapid, and high-throughput protocol for extracting of high-quality DNA from different bacterial species. Based upon our protocol, interfering phenolic compounds were removed from extraction using polyvinylpyrrolidone (PVP) and RNA contamination was precipitated using LiCl. The UV spectrophotometry and gel electrophoresis analysis resulted in high A ₂₆₀/A ₂₈₀ ratio (>1.8) with high intactness of DNA. Subsequent evaluations were performed using some quality-dependent techniques (e.g., RAPD marker and restriction digestions). The isolated DNA from 9 different bacterial species confirmed the accuracy of this protocol which requires no enzymatic processing and accordingly its low-cost making it an appropriate method for large-scale DNA isolation from various bacterial species.     

A solid-phase extraction procedure for DNA purification

The preparation and use of particulate materials for the removal of proteins from nucleic acid samples by solid-phase extraction procedures are described. The solid-phase extraction procedure is analogous to the classical phenol extraction for DNA purification, with the exception that the phenol is replaced with insoluble particulate materials that are chemically similar to phenol and thus function in an analogous manner. These particulate materials have a very high affinity for proteins and a very low affinity for nucleic acids. With these materials, it is possible to remove large quantities of proteins (i.e., tens of milligrams) from minute quantities (submicrogram) of nucleic acid and quantitatively recover the latter in a biologically active state. Compared to other procedures that are currently used to purify nucleic acids, the protocols using these materials offer the advantages of speed, quantitative DNA recovery, safety, and convenience.     

Chelex without boiling, a rapid and easy technique to obtain stable amplifiable DNA from small amounts of ethanol-stored spiders

DNA barcoding projects require high-throughput generation of sequence data to assemble the comprehensive reference databases that are required to perform large-scale biodiversity inventories and molecular ecology studies. With the advent of new sequencing technologies, the extraction step, which often requires a considerable amount of time and money, represents a significant bottleneck in many studies. Here, we present a one-step Chelex double-stranded DNA extraction protocol that is quick, cheap, easy and works with a small quantity of ethanol-stored tissue. We developed this protocol by removing the denaturation step appearing in classic methods. This modification reduces the number of handling steps to one, thus simplifying the extraction procedure and reducing the risk of sample contamination, and yields double-stranded DNA instead of the single-stranded form that classical Chelex extraction protocols usually release. DNA obtained through our method is then suitable for long-term conservation (over 1.5 years). We tested our protocol on a highly diverse genus of spiders comprised of mainly very small species. We also apply the method to two other genera of spiders, one with average size species, the other one with giant species, to test the efficacy of the method with varying amounts of input tissue. We also discuss the advantages and limitations of this DNA extraction technique when working with arthropods.     

Comparison of Metagenomic DNA Extraction Methods for Soil Sediments of High Elevation Puga Hot Spring in Ladakh,India to Explore Bacterial Diversity

Extraction of good-quality metagenomic DNA from extreme environments is quite challenging, particularly from high elevation hot spring sediments. Low microbial load, high humic acid content and other contaminants complicate the process of extraction of metagenomic DNA from hot spring sediments. In the present study, efficacy of five manual DNA extraction protocols with modifications has been evaluated for metagenomic DNA extraction from boron–sulfur rich high elevation Puga hot spring sediments. Best suited protocol was identified based on the cell lysis efficiency, DNA yield, humic acid content, PCR reproducibility and representation of bacterial diversity. Quantity as well as quality of crude metagenomic DNA differed remarkably between various protocols used and were not pure enough to give PCR amplification using 16S rRNA bacterial and archaeal primers. Crude metagenomic DNA extracted using five different DNA extraction protocols was purified using spin column based purification method. Even after purification, only three protocols C, D and E yielded metagenomic DNA that could be amplified using both archaeal and bacterial primers. To evaluate the degree of microbial diversity represented by protocols C, D and E, phylogenetic genes amplified were subjected to amplified ribosomal DNA restriction analysis (ARDRA) and denaturing gradient gel electrophoresis analysis (DGGE) analysis. ARDRA banding pattern of amplicons generated for all the three extraction protocols, i.e., C, D and E were found to be similar. DGGE of protocol E derived amplicons resulted in the similar number of dominant bands but a greater number of non-dominant bands, i.e., the highest microbial diversity in comparison to protocols C and D, respectively. In the present study, protocol E developed from Yeates et al. protocol has been found to be best in terms of DNA yield, DNA purity and bacterial diversity depiction associated with boron–sulfur rich sediment of high elevation hot springs.     

Combining bleach and mild predigestion improves ancient DNA recovery from bones

The feasibility of genome‐scale studies from archaeological material remains critically dependent on the ability to access endogenous, authentic DNA. In the majority of cases, this represents a few per cent of the DNA extract, at most. A number of specific pre‐extraction protocols for bone powder aimed to improve ancient DNA recovery before library amplification have recently been developed. Here, we test the effects of combining two of such protocols, a bleach wash and a predigestion step, on 12 bone samples of Atlantic cod and domestic horse aged 750–1350 cal. years before present. Using high‐throughput sequencing, we show that combined together, bleach wash and predigestion consistently yield DNA libraries with higher endogenous content than either of these methods alone. Additionally, the molecular complexity of these libraries is improved and endogenous DNA templates show larger size distributions. Other library characteristics, such as DNA damage profiles or the composition of microbial communities, are little affected by the pre‐extraction protocols. Application of the combined protocol presented in this study will facilitate the genetic analysis of an increasing number of ancient remains and will reduce the cost of whole‐genome sequencing.     

Faecal genetic analysis to determine the presence and distribution of elusive carnivores: design and feasibility for the Iberian lynx

Noninvasive methods using genetic markers have been suggested as ways to overcome difficulties associated with documenting the presence of elusive species. We present and assess a novel, reliable and effective molecular genetic technique for the unequivocal genetic identification of faeces from the endangered Iberian lynx (Lynx pardinus). From mitochondrial DNA (mtDNA) cytochrome b and D-loop region sequences, we designed four species-specific primers (for products 130-161 bp long) that were considered to be likely to amplify degraded DNA. We compared two DNA extraction methods, various DNA amplification conditions and the robustness and specificity of the primer pairs with 87 lynx samples from 5 potentially different lynx populations and with 328 samples of other carnivore species. The utility of the identification technique was tested with faeces of different ages, with faeces from controlled field experiments, and with faeces collected from locales with possible lynx populations from throughout the state of Andalusia, Spain (8052 km2). Faecal mtDNA extraction was more efficient using PBS wash of the faeces instead of a faeces homogenate. Our assay increased from 92.6 to 99% efficiency with a second amplification and a reduction in template concentration to overcome polymerase chain reaction (PCR) inhibition. Our assay never produced false positives, and correctly identified all lynx faeces. Of 252 faeces samples of unknown species collected throughout Andalusia, 26.6% (from three different areas) were classified as Iberian lynx, 1.4% showed evidence of PCR inhibition and 1.2% were of uncertain origin. This method has proven to be a reliable technique that can be incorporated into large-scale surveys of Iberian lynx populations and exemplifies an approach that can easily be extended to other species.     

Comparative Analysis of Different DNA Extraction Protocols: A Fast, Universal Maxi-Preparation of High Quality Plant DNA for Genetic Evaluation and Phylogenetic Studies

Four DNA extraction protocols were compared for ability to produce DNA from the leaves or needles of several species: oak, elm, pine, fir, poplar and maize (fresh materials) and rhododendron (silica dried or frozen material). With the exception of maize and poplar, the species are known to be difficult for DNA extraction. Two protocols represented classical procedures for lysis and purification, and the other two were a combination of classical lysis followed by anion exchange chromatography. The DNA obtained from all procedures was quantified and tested by PCR and Southern hybridisation.Test results indicated superiority of one of the four protocols; a combination of CTAB lysis followed by anion exchange chromatography which enabled DNA extraction from all seven species. A second protocol also produced DNA from leaves or needles of all species investigated and was well suited for PCR applications but not Southern hybridisations. The remaining protocols produced DNA from some but not all species tested.Abbreviations: CTAB, hexadecyltrimethylammonium bromide; EtOH, Ethanol; TBE, tris-borate-EDTA.     

Contaminant eluted from solid-phase plasmid affinity-purification protocol columns is not found using liquid-phase methods and can be prevented.

The preparation of high quality plasmid DNA is a necessary requirement for most molecular biology applications. We compared four different large plasmid preparation protocols, which were based on either a liquid-phase approach (Triton lysis) or purification of alkaline lysis bacterial extracts followed by supercoiled plasmid purification on affinity columns. Two host Escherichia coli strains, JM 109 and INValphaF', were used to grow the test plasmids for comparison of product plasmid DNA produced from the four different plasmid isolation methods. While the DNA grown in E. coli strain JM109, prepared by liquid-phase Triton lysis was appropriately restricted by 12 restriction enzymes, this was not the case for any of the JM109-grown DNA purified by any of the affinity column solid-phase approaches. In contrast to this, when the plasmid DNA was grown in E. coli strain INValphaF', most restriction enzymes cut DNA appropriately, irregardless of the plasmid preparation protocol used. It seems that an impurity commonly eluted with the DNA from all three of the solid-phase DNA columns had an equal effect on the above enzymes using the common host strain JM109, but not strain INValphaF'.     

DNA extraction procedure: a critical issue for bacterial diversity assessment in marine sediments

In order to evaluate whether different DNA extraction procedures can affect estimates of benthic bacterial diversity, based on 16S rRNA gene terminal restriction fragment length polymorphism (T-RFLP) fingerprinting technique, we compared two in situ lysis procedures (a SDS-based protocol and a commercial kit for DNA recovery) and one cell-extraction protocol on a variety of marine sediments. Despite the two in situ lysis procedures resulted in significantly different DNA yields (highest with the SDS in situ lysis), estimates of bacterial diversity provided a not significantly different ribotype richness, as well as similar values of the Shannon-Wiener (H') and Margalef (d) indices of biodiversity and of evenness (Pielou index, J). Conversely, the cell-extraction procedure for DNA extraction resulted always in a significantly lower ribotype richness and diversity. The analysis of similarities (anosim) among the T-RFLP electropherograms allowed concluding that ribotypes composition did not change significantly using different protocols. However, the analysis of beta-diversity (turnover diversity) revealed that a large number of ribotypes was observed exclusively with one of the three protocols utilized. When unshared ribotypes from in situ lysis and cell extraction were pooled together, total ribotype richness resulted much higher (up to 80%). Our results indicate that estimates of ribotype diversity based on a single protocol of DNA extraction can significantly underestimate the total number of bacterial ribotypes present in the benthic domain. We recommend that future studies will not only integrate different DNA extraction procedures, but also will explore the possibility of integrating two or more different genetic markers in order to increase our ability to detect the actual bacterial diversity in environmental samples.     

A simplified arthropod genomic-DNA extraction protocol for polymerase chain reaction (PCR)-based specimen identification through barcoding

Genomic DNA extraction protocols generally require the use of expensive and hazardous reagents necessary for decontamination of phenolic compounds from the extracts. In addition, they are lengthy, hindering large-scale sample extractions necessary for high-throughput analyses. Here we describe a simple, time and cost-efficient method for genomic DNA extraction from insects. The extracted DNA was successfully used in a Polymerase Chain Reaction (PCR), making it suitable for automation for large-scale genetic analysis and barcoding studies. The protocol employs a single purification step to remove polysaccharides and other contaminating compounds using a non-hazardous reagent buffer. In addition, we conducted a bioinformatics database analysis as proof of concept for the efficiency of the DNA extraction protocol by using universal barcoding primers specific for cytochrome c oxidase I gene to identify different arthropod specimens through Barcode of Life Database (BOLD) database search. The usefulness of this protocol in various molecular biology and biodiversity studies is further discussed.     

DNA gold nanoparticle conjugates incorporating thiooxonucleosides: 7-deaza-6-thio-2'-deoxyguanosine as gold surface anchor

A new protocol for the covalent attachment of oligonucleotides to gold nanoparticles was developed. Base-modified nucleosides with thiooxo groups were acting as molecular surface anchor. Compared to already existing conjugation protocols, the new linker strategy simplifies the synthesis of DNA gold nanoparticle conjugates. The phosphoramidite of 7-deaza-6-thio-2'-deoxyguanosine (6) was used in solid-phase synthesis. Incorporation of the sulfur-containing nucleosides can be performed at any position of an oligonucleotide; even multiple incorporations are feasible, which will increase the binding stability of the corresponding oligonucleotides to the gold nanoparticles. Oligonucleotide strands immobilized at the end of a chain were easily accessible during hybridization leading to DNA gold nanoparticle network formation. On the contrary, oligonucleotides immobilized via a central position could not form a DNA-AuNP network. Melting studies of the DNA gold nanoparticle assemblies revealed sharp melting profiles with a very narrow melting transition.     

Rapid and Efficient Protocols for Throughput Extraction of High Quality Plasmid DNA from Strains of Xanthomonas axonopodis pv malvacearum and Escherichia coli

Efficient protocols developed to isolate low copy plasmid DNA from Xanthomonas axonopodis pv malvacearum (Xam) and high copy recombinant plasmid DNA from Escherichia coli are described. The protocol for extraction of low copy plasmid DNA from strains of Xam yielded high concentrations of plasmid DNA and used easily available and inexpensive chemicals in simple steps. The protocol for plasmid extraction from E. coli was rapid, cost-effective and yet yielded high concentrations of plasmid DNA. The procedures are simple and can be used to process several samples at one time. The plasmid DNA extracted by two methods was sufficiently pure, free from protein and other cellular contaminants and amenable to various molecular manipulations.     

DNA isolation from soil samples for cloning in different hosts

Many protocols to extract DNA directly from soil samples have been developed in recent years. We employed two extraction methods which differed in the method of lysis and compared these methods with respect to yield, purity and degree of shearing. The main focus was on the specific isolation of DNA from different microorganisms, especially DNA from actinomycetes, as these cells are very difficult to lyse, in contrast to non-actinomycetes. Thus, we used both methods to isolate DNA from Pseudomonas, Arthrobacter and Rhodococcus and from soil spiked with the respective microorganisms. Both methods rendered high DNA yields with a low degree of shearing, but differed in the type of cells that were lysed. By one protocol (utilizing enzymatic lysis) only DNA from the Gram-negative Pseudomonas strain could be obtained whereas, by the other protocol (utilizing mechanical lysis), all microorganisms that were used could be lysed and DNA extracted from them. Using a combination of both protocols, DNA from those organisms could be obtained selectively. Furthermore, one of the protocols was modified, resulting in higher DNA yield and purity.     

Easy and efficient protocol for oomycete DNA extraction suitable for population genetic analysis

Purpose of work  

A simple and rapid DNA extraction protocol capable of obtaining high-quality and quantity DNA from a large number of individuals is essential for assaying population and phylogenetic studies of plant pathogens. Most DNA extraction protocols used with oomycetes are relatively lengthy and cumbersome for high throughput analysis. Commercial kits are widely used, but low quantities of DNA are usually obtained, and with large scale analysis multiple isolations are required.     

鳞翅目成虫乙醇保存标本基因组DNA的提取及在微卫星研究中的应用

高质量的基因组DNA样品是分子生态学研究的先决条件。本研究目的在于探索从东方粘虫Pseudaletia separata (Walker)成虫自然种群的乙醇保存标本中分离高质量基因组DNA的有效方案。在2 mL微型离心管中进行4种提取方案的实验比较,结果发现采用传统的苯酚抽提方法的2种方案提取腹部中段组织的基因组DNA,样品合格率只有7.69%~40%。但是,如果在苯酚抽提以前加入高浓度盐和十六烷基三甲基溴化铵（CTAB）,就会使DNA样品合格率达到68.42%~95.28%,而且DNA平均产量达到5.59~10.04 mg/g,明显高于前者的2.83~5.78 mg/g （统计检验表明,在不同种群中差异显著或不显著）。研究结果还证明腹部组织比胸部组织更适宜提取DNA。对来自一个自然种群的99头东方粘虫DNA合格样品的统计分析表明,DNA提取总量（μg）与组织样品用量（mg）之间存在弱的正相关关系,平均DNA提取量（mg/g）与组织样品用量（mg）之间存在中度负相关关系。总之,在2 mL微型离心管中,用10~20 mg腹部组织,利用CTAB+苯酚抽提方法可以获得高纯度和高含量的基因组DNA样品。用该方案提取的基因组DNA能够顺利地进行微卫星位点的分离和基因分型。     

A Simple, Reliable, and Fast Protocol for Thraustochytrid DNA Extraction

DNA extraction of thraustochytrids, common marine unicellular organisms, is usually accomplished by either the cetyltrimethylammonium bromide (CTAB) or proteinase K protocols. A novel lysis buffer protocol for thraustochytrid total DNA extraction is described. The average isolated total DNA is 20 to 40 kb, and DNA samples are suitable for a variety of uses including 18S–ribosomal DNA polymerase chain reaction, restriction enzyme digestions, and amplified fragment length polymorphism analyses. The new protocol is also faster than the other protocols. Received July 31, 2000; accepted November 2, 2000.     

PCR detection of Brachyspira aalborgi and Brachyspira pilosicoli in human faeces

Previously-developed PCR protocols specific for the 16S rRNA gene of the intestinal spirochaetes Brachyspira aalborgi and Brachyspira pilosicoli were adapted for the detection of these species in human faeces, following DNA extraction and purification using mini-prep columns. The limits of detection in seeded faeces for B. aalborgi and B. pilosicoli respectively were 2x10(2) and 7x10(3) cells per PCR reaction, equivalent to 5x10(4) and 1x10(5) cells per g of faeces. The PCR techniques were applied to faecal samples from two patients with histological evidence of intestinal spirochaetosis. In the first patient, in whom B. aalborgi had been identified by 16S rDNA PCR from colonic biopsies, a positive amplification for B. aalborgi only was obtained from the faeces. The organism could not be isolated from these faeces. In the second patient, both colonic biopsies and faeces were PCR positive for B. pilosicoli only, and B. pilosicoli was isolated from the faeces. These new faecal PCR protocols should be valuable for future studies on the epidemiology of intestinal spirochaete infections in human populations, particularly as it is not currently possible to isolate B. aalborgi from faeces.