Low molecular weight disulfide cross-linking peptides as nonviral gene delivery carriers

Cross-linking peptides have been developed by inserting multiple Cys residues into a 20 amino acid condensing peptide that polymerizes through disulfide bond formation when bound to DNA resulting in small, highly stable DNA condensates that mediate efficient in vitro gene transfer [McKenzie et al. (2000) J. Biol. Chem. 275, 9970-9977]. In the present study, a minimal peptide of four Lys and two terminal Cys residues was found to substitute for Cys-Trp-(Lys)(17)-Cys, resulting in DNA condensates with similar particle size and gene expression in HepG2 cells. Substitution of His for Lys residues resulted in an optimal peptide of Cys-His-(Lys)(6)-His-Cys that, in addition to the attributes described above, also provided buffering capacity to enhance in vitro gene expression in the absence of chloroquine. The reported structure-activity relationships systematically explore peptides with combinations of Lys, Cys, and His residues resulting in low molecular weight peptides with improved gene transfer properties.     

Biological activities of C-terminal 15-residue synthetic fragment of melittin: design of an analog with improved antibacterial activity

Melittin, the 26-residue predominant toxic peptide from bee venom, exhibits potent antibacterial activity in addition to its hemolytic activity. The synthetic peptide of 15 residues corresponding to its C-terminal end (MCF), which encompasses its most amphiphilic segment, is now being shown to possess antibacterial activity about 5-7 times less compared to that of melittin. MCF, however, is 300 times less hemolytic. An analog of MCF, MCFA, in which two cationic residues have been transpositioned to the N-terminal region from the C-terminal region, exhibits antibacterial activity comparable to that of melittin, but is only marginally more hemolytic than MCF. The biophysical properties of the peptides, like folding and aggregation, correlate well with their biological properties.     

Melittin and the 8-26 fragment. Differences in ionophoric properties as measured by monolayer method

Melittin is a major (approximately 50%) protein component of bee venom. This peptide is an amphiphilic protein, because, while the amino acid residues 1-20 are predominantly hydrophobic (with the exception of Lys-7), residues 21-26 are hydrophilic. The binding properties to vesicles and lipid bilayers of melittin have provided much useful information regarding biological (hemolytic) activity (Habermann, E., 1972, Science [Wash. DC], 177:314-322). Recent studies have convincingly established that the melittin monolayer (at air-water interface) model membrane system allows one to analyze the various forces present in such structures. We present comparative monolayer studies of melittin and the peptide fragment 8-26 regarding the channel formation for the selective anion (Cl-) penetration in monolayers, analogous to melittin (tetramer) channel function in lipid bilayer. The differences in surface pressure and surface potential of monolayers between native melittin and the 8-26 fragment suggest that these may be ascribed to Lys-7.     

Melittin: a Membrane-active Peptide with Diverse Functions

Melittin is the principal toxic component in the venom of the European honey bee Apis mellifera and is a cationic, hemolytic peptide. It is a small linear peptide composed of 26 amino acid residues in which the amino-terminal region is predominantly hydrophobic whereas the carboxy-terminal region is hydrophilic due to the presence of a stretch of positively charged amino acids. This amphiphilic property of melittin has resulted in melittin being used as a suitable model peptide for monitoring lipid–protein interactions in membranes. In this review, the solution and membrane properties of melittin are highlighted, with an emphasis on melittin–membrane interaction using biophysical approaches. The recent applications of melittin in various cellular processes are discussed.     

The effect of cyclization of magainin 2 and melittin analogues on structure, function, and model membrane interactions: implication to their mode of action

The amphipathic alpha-helical structure is a common motif found in membrane binding polypeptides including cell lytic peptides, antimicrobial peptides, hormones, and signal sequences. Numerous studies have been undertaken to understand the driving forces for partitioning of amphipathic alpha-helical peptides into membranes, many of them based on the antimicrobial peptide magainin 2 and the non-cell-selective cytolytic peptide melittin, as paradigms. These studies emphasized the role of linearity in their mode of action. Here we synthesized and compared the structure, biological function, and interaction with model membranes of linear and cyclic analogues of these peptides. Cyclization altered the binding of melittin and magainin analogues to phospholipid membranes. However, at similar bound peptide:lipid molar ratios, both linear and cyclic analogues preserved their high potency to permeate membranes. Furthermore, the cyclic analogues preserved approximately 75% of the helical structure of the linear peptides when bound to membranes. Biological activity studies revealed that the cyclic melittin analogue had increased antibacterial activity but decreased hemolytic activity, whereas the cyclic magainin 2 analogue had a marked decrease in both antibacterial and hemolytic activities. The results indicate that the linearity of the peptides is not essential for the disruption of the target phospholipid membrane, but rather provides the means to reach it. In addition, interfering with the coil-helix transition by cyclization, while maintaining the same sequence of hydrophobic and positively charged amino acids, allows a separated evaluation of the hydrophobic and electrostatic contributions to binding of peptides to membranes.     

Effect of ionic strength on folding and aggregation of the hemolytic peptide melittin in solution

Melittin is a cationic, amphipathic, hemolytic peptide composed of 26 amino acid residues. It is intrinsically fluorescent due to the presence of a single tryptophan residue, which has been shown to be crucial for its hemolytic activity. It undergoes a structural transition from a random coil monomer to an alpha-helical tetramer at high ionic strength. Although the aggregation behavior of melittin in solution is well characterized, dynamic information associated with the aggregation of melittin is lacking. In this paper, we have monitored the effect of ionic strength on the dynamics and aggregation behavior of melittin in aqueous solution by utilizing sensitive fluorescence approaches, which include the red edge excitation shift (REES) approach. Importantly, we demonstrate that REES is sensitive to the self-association of melittin induced by ionic strength. The change in environment experienced by melittin tryptophan(s) is supported by changes in fluorescence emission maximum, polarization, and lifetime. In addition, the accessibility of the tryptophan residue was probed by fluorescence quenching experiments using acrylamide and trichloroethanol as soluble and hydrophobic quenchers, respectively. Circular dichroism studies confirm the ionic strength-induced change in the secondary structure of melittin. Taken together, these results constitute the first report showing that REES could be used as a sensitive tool to monitor the aggregation behavior of melittin in particular and other proteins and peptides in general.     

β-发卡抗菌肽的全新设计及其生物学活性

通过缬氨酸和精氨酸的交替连接形成β-发卡结构的两条侧链,D-脯氨酸和甘氨酸形成β-转角单元以及侧链末端的两个半胱氨酸连接形成一个二硫键,来设计得到全新的由16残基构成的β-发卡抗菌肽VR。对设计得到的抗菌肽VR的生物学活性进行了检测,主要测定了新型β-发卡抗菌肽VR的最小杀菌浓度、对红细胞的溶血活性、杀菌动力学和盐敏感性。结果发现,VR和蜂毒素具有相似的杀菌活性,而溶血活性远低于蜂毒素,这表明VR比蜂毒素具有更高的细胞选择性。在NaCl的浓度低于100 mmol/L时,VR的杀菌活性没有受到影响;在NaCl的浓度为100 mmol/L时,VR具有50%的杀菌活性。综上可见,VR具有较优异的生物学活性,拥有成为抗生素替代物的发展潜力。     

Hemolytic and antimicrobial activities of the twenty-four individual omission analogues of melittin

Although melittin's hemolytic activity has been extensively studied, the orientation of membrane-bound melittin remains uncertain. We have investigated the effect of individually omitted amino acid residues on melittin's activity and related these results to the existing models of melittin-membrane interaction. The extent of hemolysis of the omission analogues closely followed the four known conformational regions of melittin: omission of any of the residues making up the two alpha-helical regions decreased the hemolytic activity relative to melittin, while omission of any of the residues making up the "hinge" or the C-terminal regions had little or no effect. Our results correlate best with a proposed model in which melittin initially forms "holes" in the membrane, resulting in an initial rapid loss of hemoglobin; the membrane-bound melittin is then internalized into the membrane, resulting in a later slow phase of hemoglobin loss. It was also found that induced structural effects caused by peptide-lipid interactions could be studied by using RP-HPLC, with an excellent correlation found between the retention times of the individual omission analogues and their hemolytic activities.     

The sting. Melittin forms channels in lipid bilayers

Melittin, a toxin of bee venom, is a cationic polypeptide composed of 26 amino acids. The six residues of the C-terminal end are polar and 19 of the 20 residues of the N-terminal end are hydrophobic. Exposure of the lecithin bilayer to melittin results in the formation of channels that are more permeable to anions that to cations. Unilateral addition of melittin produces a voltage-dependent increase in membrane conductance when the side where the polypeptide is present in made positive but not when it is made negative. At a fixed voltage, the conductance increases with the fourth power of the melittin concentration in the aqueous phase. At a fixed peptide concentration, the conductance increases approximately e-fold per 6-mV increase in the electrical potential difference across the membrane. These results suggest that four melittin monomers are needed to form a channel and, furthermore, that a minimum of four equivalent electronic charges need to be displaced by the electrical field to explain the voltage dependence of the conductance.     

Molecular dynamics simulation of melittin in a dimyristoylphosphatidylcholine bilayer membrane.

Molecular dynamics trajectories of melittin in an explicit dimyristoyl phosphatidylcholine (DMPC) bilayer are generated to study the details of lipid-protein interactions at the microscopic level. Melittin, a small amphipathic peptide found in bee venom, is known to have a pronounced effect on the lysis of membranes. The peptide is initially set parallel to the membrane-solution interfacial region in an alpha-helical conformation with unprotonated N-terminus. Solid-state nuclear magnetic resonance (NMR) and polarized attenuated total internal reflectance Fourier transform infrared (PATIR-FTIR) properties of melittin are calculated from the trajectory to characterize the orientation of the peptide relative to the bilayer. The residue Lys7 located in the hydrophobic moiety of the helix and residues Lys23, Arg24, Gln25, and Gln26 at the C-terminus hydrophilic form hydrogen bonds with water molecules and with the ester carbonyl groups of the lipids, suggesting their important contribution to the stability of the helix in the bilayer. Lipid acyl chains are closely packed around melittin, contributing to the stable association with the membrane. Calculated density profiles and order parameters of the lipid acyl chains averaged over the molecular dynamics trajectory indicate that melittin has effects on both layers of the membrane. The presence of melittin in the upper layer causes a local thinning of the bilayer that favors the penetration of water through the lower layer. The energetic factors involved in the association of melittin at the membrane surface are characterized using an implicit mean-field model in which the membrane and the surrounding solvent are represented as structureless continuum dielectric material. The results obtained by solving the Poisson-Bolztmann equation numerically are in qualitative agreement with the detailed dynamics. The influence of the protonation state of the N-terminus of melittin is examined. After 600 ps, the N-terminus of melittin is protonated and the trajectory is continued for 400 ps, which leads to an important penetration of water molecules into the bilayer. These observations provide insights into how melittin interacts with membranes and the mechanism by which it enhances their lysis.     

In situ study by polarization modulated Fourier transform infrared spectroscopy of the structure and orientation of lipids and amphipathic peptides at the air-water interface.

Free amphipathic peptides and peptides bound to dimyristoylphosphatidylcholine (DMPC) were studied directly at the air/water interface using polarization modulation infrared reflection absorption spectroscopy (PMIRRAS). Such differential reflectivity measurements proved to be a sensitive and efficient technique to investigate in situ the respective conformations and orientations of lipid and peptide molecules in pure and mixed films. Data obtained for melittin, a natural hemolytic peptide, are compared to those of L15K7, an ideally amphipathic synthetic peptide constituted by only apolar Leu and polar Lys residues. For pure peptidic films, the intensity, shape, and position of the amide I and II bands indicate that the L15K7 peptide adopts a totally alpha-helical structure, whereas the structure of melittin is mainly alpha-helical and presents some unordered domains. The L15K7 alpha-helix axis is oriented essentially parallel to the air-water interface plane; it differs for melittin. When injected into the subphase, L15K7 and melittin insert into preformed expanded DMPC monolayers and can be detected by PMIRRAS, even at low peptide content (> 50 DMPC molecules per peptide). In such conditions, peptides have the same secondary structure and orientation as in pure peptidic films.     

Influence of the arrangement and secondary structure of melittin peptides on the formation and stability of toroidal pores

Melittin interactions with lipid bilayers and melittin formed pores are extensively studied to understand the mechanism of the toroidal pore formation. Early experimental studies suggested that melittin peptide molecules are anchored by their positively charged residues located next to the C-terminus to only one leaflet of the lipid bilayer (asymmetric arrangement). However, the recent non-linear spectroscopic experiment suggests a symmetric arrangement of the peptides with the C-terminus of the peptides anchored to both bilayers. Therefore, we present here a computational study that compares the effect of symmetric and asymmetric arrangements of melittin peptides in the toroidal pore formation. We also investigate the role of the peptide secondary structure during the pore formation. Two sets of the symmetric and asymmetric pores are prepared, one with a helical peptide from the crystal structure and the other set with a less helical peptide. We observe a stable toroidal pore being formed only in the system with a symmetric arrangement of the less helical peptides. Based on the simulation results we propose that the symmetric arrangement of the peptides might be more favorable than the asymmetric arrangement, and that the helical secondary structure is not a prerequisite for the formation of the toroidal pore.     

Structural and thermodynamic aspects of the interaction between heparan sulfate and analogues of melittin

Melittin is an amphipathic cationic peptide derived from honeybee venom with well-known cytolytic and antimicrobial properties. When coupled to cationic polymers or lipid molecules, it forms conjugates with high transfection efficiency and low toxicity with promising applications in gene therapy. A first step in the internalization of melittin and its conjugates is their binding to the cell surface, a reaction likely to involve heparan sulfate proteoglycans (HSPG). In the present work, we characterize the binding equilibrium of heparan sulfate (HS) with two melittin analogues, [Cys(1)]melittin (mel-SH) and retro-inverso [Cys(1)]melittin (ri-mel-SH). The terminal cysteine found in these peptides replaces the N-terminal glycine present in native melittin and allows covalent binding to other molecules. Isothermal titration calorimetry (ITC) reveals a high affinity of each melittin analogue to HS. Association constants of 4.7 x 10(4) and 3.5 x 10(5) M(-)(1) are found at physiological ionic strength and 15 degrees C for ri-mel-SH and mel-SH, respectively. The reaction enthalpy measured under these conditions is DeltaH(degrees)pep= 4.2 kcal/mol for ri-mel-SH and DeltaH(degrees)pep= 1.1 kcal/mol for mel-SH. The peptide-to-HS stoichiometry is approximately 20 for ri-mel-SH and approximately 14 for mel-SH under the same conditions. Temperature dependence studies using ri-mel-SH (mel-SH) show that DeltaH(degrees)pep decreases in magnitude upon increase in temperature, which results in a molar heat capacity of DeltaH(degrees)pep= -322 cal mol(-)(1) K(-)(1) (-45 cal mol(-)(1) K(-)(1)). Such a negative heat capacity change is not expected for a purely electrostatic interaction and indicates that hydrophobic and other interactions are also involved in the binding equilibrium. Salt dependence studies of the binding constants confirm that nonelectrostatic forces are an important component of the HS-melittin interaction. Binding to HS induces conformational changes in both peptides, with ri-mel-SH showing a 6-fold increase of the alpha-helix content when incubated with HS under saturation conditions.     

C- versus N-terminally linked melittin-polyethylenimine conjugates: the site of linkage strongly influences activity of DNA polyplexes

BACKGROUND: One major barrier limiting the transfection efficiency of polyplexes is poor endosomal release, especially when small particles are applied. In an approach to overcome this barrier, covalent attachment of the membrane-active peptide all-(L)-melittin to polyethylenimine (PEI) polyplexes was found to enhance gene transfer efficiency. METHODS: The N-terminus of natural all-(L)- or non-immunogenic all-(D)-melittin was covalently coupled to PEI. In addition, two different all-(D)-melittin conjugates were synthesized, with PEI covalently attached to either the C-terminus (C-mel-PEI) or the N-terminus of melittin (N-mel-PEI). Melittin-PEI polyplexes with particle sizes < 150 nm were generated in HEPES-buffered glucose and tested in transfection experiments. The membrane lytic activities of conjugates and polyplexes were analyzed at neutral and endosomal pH. RESULTS: All-(D)-melittin conjugates mediated enhanced gene expression similar to the natural all-(L)-stereoisomer, with up to 160-fold higher luciferase activity than unmodified PEI. The site of melittin linkage strongly influenced the membrane-destabilizing activities of both conjugates and polyplexes. C-mel-PEI was highly lytic at neutral pH and therefore elevated doses of C-mel-PEI polyplexes induced high toxicity. In contrast, N-mel-PEI was less lytic at neutral pH but retained higher lytic activity than C-mel-PEI at endosomal pH. This apparently promoted better endosomal release of N-mel-PEI polyplexes resulting in efficient gene delivery in different cell lines. CONCLUSIONS: The high potency of C-mel-PEI to destabilize membranes at neutral pH is presumably due to a reported destabilization mechanism proceeding through membrane insertion of the peptide. In contrast, N-mel-PEI is supposed to induce lysis by insertion-independent pore formation according to the toroidal pore model.     

Design of potent, non-toxic antimicrobial agents based upon the structure of the frog skin peptide, pseudin-2

Pseudin-2, a naturally occurring 24 amino-acid-residue antimicrobial peptide first isolated from the skin of the South American paradoxical frog Pseudis paradoxa, has weak hemolytic and cytolytic activity but also relatively low potency against microorganisms. In a membrane-mimetic environment, the peptide exists in an amphipathic alpha-helical conformation. Analogs of the peptide with increased cationicity and alpha-helicity were chemically synthesized by progressively substituting neutral and acidic amino acid residues on the hydrophilic face of the alpha-helix by lysine. Analogs with up to three L-lysine substitutions showed increased potency against a range of gram-negative and gram-positive bacteria (up to 16-fold) whilst retaining low hemolytic activity. The analog [D-Lys3, D-Lys10, D-Lys14]pseudin-2 showed potent activity against gram-negative bacteria (minimum inhibitory concentration, MIC=5 microM against several antibiotic-resistant strains of Escherichia coli) but very low hemolytic activity (HC50>500 microM) and cytolytic activity against L929 fibroblasts (LC50=215 microM). Increasing the number of l-lysines to four and five did not enhance antimicrobial potency further but increased hemolytic activity towards human erythrocytes. Time-kill studies demonstrated that the analog [Lys3, Lys10, Lys14, Lys21]pseudin-2 at a concentration of 1 x MIC was bacteriocidal against E. coli (99.9% cell death after 96 min) but was bacteriostatic against S. aureus. Increasing the hydrophobicity of pseudin-2, while maintaining the amphipathic character of the molecule, by substitution of neutral amino acids on the hydrophobic face of the alpha-helix by L-phenylalanine, had only minor effects on antimicrobial and hemolytic activities.     

Novel glycosylated [Lys(7)]-dermorphin analogues: synthesis, biological activity and conformational investigations.

Syntheses of the [Lys(7)]- and [Hyp(6),Lys(7)]-dermorphin analogues in which either Tyr(5) or Hyp(6) are O-glucosylated are described. For comparison, the carbohydrate-free peptides have also been prepared. Structural investigations by FT-IR and CD measurements were carried out on the synthetic analogues and some preliminary pharmacological experiments were also performed.The biological potency of the glucosylated analogues was compared with that of the micro-opioid receptor agonist dermorphin in GPI preparations. Glucosylation of either Tyr(5) or Hyp(6) reduces the potency of both [Lys(7)]-dermorphin and [Hyp(6),Lys(7)]-dermorphin. The effect induced by the Tyr(5) glucosylation is quite strong and the potency of both peptides is reduced by about 150 times. A similar but less dramatic effect is induced by the glucosylation of the Hyp(6) residue, and the potency of the parent peptide is reduced by about 15 times. The presence of acetyl groups on the sugar hydroxyl functions further reduces the agonistic potency of the glucosylated analogues. The analgesic potency of [Hyp(6),Lys(7)]-, [Hyp(betaGlc)(6),Lys(7)]- and [Tyr(betaGlc)(5),Lys(7)]-dermorphin were also tested in vivo by the tail-flick test. The glucosylated hydroxyproline-containing analogue is 8-10 times less active than the parent peptide, but its analgesic effect lasts significantly longer.     

蜂毒溶血肽类似物定量构效关系计算分析

采用HyperChem7．0结构分析软件,对蜂毒溶血肽类似物的分予体积等结构参数进行了计算分析．分别利用多元线性回归、BP-神经网络计算法进行统计分析,获得两个相关性好的QsAR（quantitative structure-function relationship）模型．结果显示,蜂毒肽溶血活性与生成热、键合能、表面积、分予体积、极化能、醇水分配系数、水舍能相关．为降低溶血作用,指出在设计蜂毒肽结构时应尽量避免螺旋状结构．少用疏水性氨基酸．     

(LYS)(16)-based reducible polycations provide stable polyplexes with anionic fusogenic peptides and efficient gene delivery to post mitotic cells

Extracellular stability, endocytic escape, intracellular DNA release and nuclear translocation of DNA are all critical properties of non-viral vector/DNA particles. We have evaluated a (Lys)(16)-based linear, reducible polycation (RPC) in combination with an acid-dependent, anionic fusogenic peptide for gene delivery to dividing and post-mitotic cells. The RPC was formed from Cys(Lys)(16)Cys monomers. Molecular weight was 24,000 Da, corresponding to an average of 10.5 peptide monomers per RPC. Non-reducible polylysine (PLL) (27,000 Da) and monomeric (Lys)(16) peptide were evaluated for comparison. (Lys)(16)/DNA particles were disrupted at fusogenic peptide concentrations well below those used for gene delivery. By contrast, RPC/DNA an PLL/DNA particles were stable in the presence of high concentrations of the anionic peptide. Addition of 10% serum virtually abolished the transfection ability of (Lys)(16)/DNA/fusogenic peptide particles, but had little effect on RPC/DNA/fusogenic peptide particles. RPC/DNA/fusogenic peptide particles were highly effective for gene delivery to both cell lines and post-mitotic corneal endothelium. PLL/DNA/fusogenic peptide particles were moderately effective on cell lines, but gave no gene delivery with corneal endothelial cells. We conclude that (Lys)(16)-based RPC/DNA/fusogenic peptide particles provide a gene delivery system which is potentially stable in the extracellular environment and, on reductive depolymerisation, can release DNA plasmids for nuclear translocation.     

Phospholipases: melittin facilitation of bee venom phospholipase A2-catalyzed hydrolysis of unsonicated lecithin liposomes.

Melittin isolated from the venom of the common honey bee is a potent activator for bee venom phospholipase A₂-catalyzed hydrolysis of unsonicated liposomes of egg phosphatidyl choline. At 37 °C and pH 8, the rate of this enzymatic reaction is increased approximately 300-fold by the addition of 8 × 10^?5m melittin. The magnitude of facilitation of the phospholipase A₂ reaction is much greater than that previously reported by other workers for systems involving sonicated egg phosphatidyl choline liposomes or Escherichia coli membrane fragments as substrates. Melittin having lysines quantitatively modified through reaction with methyl acetimidate is as effective a potentiator of phospholipase A₂ activity as the unmodified material. The same result was obtained for melittin in which the single tryptophan residue was modified. Melittin modified by succinylation retained approximately 50% of its capacity to facilitate phospholipase A₂ activity. In contrast, a modified melittin in which the C-terminal four amino residues were removed, acetimidated des(23–26)melittin, is a very poor activator, as is a mixture of this peptide with the C-terminal tetrapeptide. In contrast to the results with egg lecithin liposomes, melittin has little influence on the susceptibility of monomolecular aqueous solutions of dihexanoylphosphatidyl choline to phospholipase A₂ attack.     

A dimethylmaleic acid-melittin-polylysine conjugate with reduced toxicity, pH-triggered endosomolytic activity and enhanced gene transfer potential

BACKGROUND: Poor endosomal release is one major barrier of gene delivery. Endosomolytic polyethylenimine-melittin conjugates have shown to enhance gene transfer efficiency; however, cytotoxicity due to their general membrane-destabilizing properties limits their application. To overcome this drawback we grafted a polycation with a masked pH-responsive melittin derivate and investigated lytic activity, gene transfer efficiency and cytotoxicity of the resulting conjugate. METHODS: Melittin (Mel) was modified with dimethylmaleic anhydride (DMMAn) and covalently coupled to poly-L-lysine (PLL). The membrane lytic activity was analyzed after incubation at neutral or endosomal pH. PLL-DMMAn-Mel polyplexes were generated in HEPES-buffered glucose and tested in transfection experiments using luciferase as reporter gene. Cellular cytotoxicity was analyzed by measurement of membrane integrity and metabolic activity. RESULTS: Covalent attachment of DMMAn-modified melittin to PLL resulted in a pH-responsive conjugate. No lytic activity was observed at neutral pH; after acidic cleavage of the protecting groups at pH 5 lytic activity was regained. Acute toxicity was greatly reduced (as compared to PLL-Mel or even unmodified PLL) and high gene expression levels (up to 1800-fold higher than unmodified PLL) were obtained. CONCLUSIONS: Modification of the polycationic carrier PLL with DMMAn-masked melittin not only enhances gene transfer efficiency, but also strongly reduces the acute toxicity of melittin and PLL. Hence this modification might be useful for optimizing polycationic gene carriers.