Large‐Area,Ultrathin Inorganic Network Coverages–Graphene Hierarchical Electrodes for Flexible,Heat‐Resistant Energy Storage Application

Graphene and quasi‐2D graphene‐like materials with an ultrathin thickness have been investigated as a new class of nanoscale materials due to their distinctive properties. A novel “molecular tools‐assistances” strategy is developed to fabricate two kinds of graphene‐based electrodes, ultrathin Fe‐doped MnO₂ network coverage–graphene composites (G‐MFO) and ultrathin MoS₂ network coverage–graphene composites (G‐MoS₂) with special hierarchical structures. Such structures enable a large contact interface between the active materials and graphene and thus fully exploit the synergistic effect from both the high specific capacitance of MFO or MoS₂ and the superb conductivity of graphene. Benefiting from their unique structural features, G‐MFO and G‐MoS₂ films directly use as free‐standing electrodes for flexible asymmetric supercapacitors with a nonaqueous gel electrolyte. The device achieves a high energy/power density, superior flexibility, good rate capability as well as outstanding performance stability even at a high temperature. This work represents a promising prototype to design new generation of hybrid supercapacitors for future energy storage devices.     

Flexible and Highly Scalable V2O5‐rGO Electrodes in an Organic Electrolyte for Supercapacitor Devices

Vanadium pentoxide–reduced graphene oxide (rGO) free‐standing electrodes are used as electrodes for supercapacitor applications, eliminating the need for current collectors or additives and reducing resistance (sheet resistance 29.1 Ω □^?1). The effective exfoliation of rGO allows improved electrolyte ions interaction, achieving high areal capacitance (511.7 mF cm^?2) coupled with high mass loadings. A fabricated asymmetric flexible device based on rGO/V₂O₅‐rGO (VGO) consists of approximately 20 mg of active mass and still delivers a low equivalent series resistance (ESR) of 3.36 Ω with excellent cycling stability. A prototype unit of the assembled device with organic electrolyte is shown to light up eight commercial light‐emitting diode bulbs.     

All‐Solution‐Processed Silver Nanowire Window Electrode‐Based Flexible Perovskite Solar Cells Enabled with Amorphous Metal Oxide Protection

Silver nanowire (AgNW)‐based transparent electrodes prepared via an all‐solution‐process are proposed as bottom electrodes in flexible perovskite solar cells (PVSCs). To enhance the chemical stability of AgNWs, a pinhole‐free amorphous aluminum doped zinc oxide (a‐AZO) protection layer is deposited on the AgNW network. Compared to its crystalline counterpart (c‐AZO), a‐AZO substantially improves the chemical stability of the AgNW network. For the first time, it is observed that inadequately protected AgNWs can evanesce via diffusion, whereas a‐AZO secures the integrity of AgNWs. When an optimally thick a‐AZO layer is used, the a‐AZO/AgNW/AZO composite electrode exhibits a transmittance of 88.6% at 550 nm and a sheet resistance of 11.86 Ω sq^?1, which is comparable to that of commercial fluorine doped tin oxide. The PVSCs fabricated with a configuration of Au/spiro‐OMeTAD/CH₃NH₃PbI₃/ZnO/AZO/AgNW/AZO on rigid and flexible substrates can achieve power conversion efficiencies (PCEs) of 13.93% and 11.23%, respectively. The PVSC with the a‐AZO/AgNW/AZO composite electrode retains 94% of its initial PCE after 400 bending iterations with a bending radius of 12.5 mm. The results clearly demonstrate the potential of AgNWs as bottom electrodes in flexible PVSCs, which can facilitate the commercialization and large‐scale deployment of PVSCs.     

Stable Seamless Interfaces and Rapid Ionic Conductivity of Ca–CeO2/LiTFSI/PEO Composite Electrolyte for High‐Rate and High‐Voltage All‐Solid‐State Battery

Stable and seamless interfaces among solid components in all‐solid‐state batteries (ASSBs) are crucial for high ionic conductivity and high rate performance. This can be achieved by the combination of functional inorganic material and flexible polymer solid electrolyte. In this work, a flexible all‐solid‐state composite electrolyte is synthesized based on oxygen‐vacancy‐rich Ca‐doped CeO₂ (Ca–CeO₂) nanotube, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and poly(ethylene oxide) (PEO), namely Ca–CeO₂/LiTFSI/PEO. Ca–CeO₂ nanotubes play a key role in enhancing the ionic conductivity and mechanical strength while the PEO offers flexibility and assures the stable seamless contact between the solid electrolyte and the electrodes in ASSBs. The as‐prepared electrolyte exhibits high ionic conductivity of 1.3 × 10^?4 S cm^?1 at 60 °C, a high lithium ion transference number of 0.453, and high‐voltage stability. More importantly, various electrochemical characterizations and density functional theory (DFT) calculations reveal that Ca–CeO₂ helps dissociate LiTFSI, produce free Li ions, and therefore enhance ionic conductivity. The ASSBs based on the as‐prepared Ca–CeO₂/LiTFSI/PEO composite electrolyte deliver high‐rate capability and high‐voltage stability.     

3D Printable Ceramic–Polymer Electrolytes for Flexible High‐Performance Li‐Ion Batteries with Enhanced Thermal Stability

This study establishes an approach to 3D print Li‐ion battery electrolytes with controlled porosity using a dry phase inversion method. This ink formulation utilizes poly(vinyldene fluoride) in a mixture of N‐methyl‐2‐pyrrolidone (good solvent) and glycerol (weak nonsolvent) to generate porosity during a simple drying step. When a nanosized Al₂O₃ filler is included in the ink, uniform sub‐micrometer pore formation is attained. In other words, no additional processing steps such as coagulation baths, stretching, or etching are required for full functionality of the electrolyte, which makes it a viable candidate to enable completely additively manufactured Li‐ion batteries. Compared to commercial polyolefin separators, these electrolytes demonstrate comparable high rate electrochemical performance (e.g., 5 C), but possess better wetting characteristics and enhanced thermal stability. Additionally, this dry phase inversion method can be extended to printable composite electrodes, yielding enhanced flexibility and electrochemical performance over electrodes prepared with only good solvent. Finally, sequentially printing this electrolyte ink over a composite electrode via a direct write extrusion technique has been demonstrated while maintaining expected functionality in both layers. These ink formulations are an enabling step toward completely printed batteries and can allow direct integration of a flexible power source in restricted device areas or on nonplanar surfaces.     

Vanadium Oxide Nanowire–Carbon Nanotube Binder‐Free Flexible Electrodes for Supercapacitors

Vanadium pentoxide (V₂O₅) layered nanostructures are known to have very stable crystal structures and high faradaic activity. The low electronic conductivity of V₂O₅ greatly limits the application of vanadium oxide as electrode materials and requires combining with conducting materials using binders. It is well known that the organic binders can degrade the overall performance of electrode materials and need carefully controlled compositions. In this study, we develop a simple method for preparing freestanding carbon nanotube (CNT)‐V₂O₅ nanowire (VNW) composite paper electrodes without using binders. Coin cell type (CR2032) supercapacitors are assembled using the nanocomposite paper electrode as the anode and high surface area carbon fiber electrode (Spectracarb 2225) as the cathode. The supercapacitor with CNT‐VNW composite paper electrode exhibits a power density of 5.26 kW Kg^?1 and an energy density of 46.3 Wh Kg^?1. (Li)VNWs and CNT composite paper electrodes can be fabricated in similar manner and show improved overall performance with a power density of 8.32 kW Kg^?1 and an energy density of 65.9 Wh Kg^?1. The power and energy density values suggest that such flexible hybrid nanocomposite paper electrodes may be useful for high performance electrochemical supercapacitors.     

High‐Surface‐Area Porous Platinum Electrodes for Enhanced Charge Transfer

Cobalt‐based electrolytes are highly tunable and have pushed the limits of dye‐sensitized solar cells, enabling higher open‐circuit voltages and new record efficiencies. However, the performance of these electrolytes and a range of other electrolytes suffer from slow electron transfer at platinum counter electrodes. High surface area platinum would enhance catalysis, but pure platinum structures are too expensive in practice. Here, a material‐efficient host‐guest architecture is developed that uses an ultrathin layer of platinum deposited upon an electrically conductive scaffold, niobium‐doped tin oxide (NTO). This nanostructured composite enhances the counter electrode performance of dye‐sensitized solar cells (DSCs) using a Co^(II/III)BPY₃ electrolyte with an increased fill factor and power conversion efficiency (11.26%), compared to analogous flat films. The modular strategy is elaborated by integrating a light scattering layer onto the counter electrode to reflect unabsorbed light back to the photoanode to improve the short‐circuit current density and power conversion efficiency.     

High Energy Density Supercapacitor Based on a Hybrid Carbon Nanotube–Reduced Graphite Oxide Architecture

A high energy density supercapacitor device is reported that utilizes hybrid carbon electrodes and the ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMIMBF₄) as an electrolyte. The hybrid electrodes are prepared from reduced graphite oxide (rGO) and purified single‐walled carbon nanotubes (SWCNTs). A simple casting technique gives the hybrid structure with optimum porosity and functionality that provides high energy and power densities. The combination of SWCNTs and rGO in a weight ratio of 1:1 is found to afford a specific capacitance of 222 F g^?1 and an energy density of 94 Wh kg^?1 at room temperature.     

Anomalous Charge‐Extraction Behavior for Graphene‐Oxide (GO) and Reduced Graphene‐Oxide (rGO) Films as Efficient p‐Contact Layers for High‐Performance Perovskite Solar Cells

Reduced graphene oxides (rGO) are synthesized via reduction of GO with reducing agents as a hole‐extraction layer for high‐performance inverted planar heterojunction perovskite solar cells. The best efficiencies of power conversion (PCE) of these rGO cells exceed 16%, much greater than those made of GO and poly(3,4‐ethenedioxythiophene):poly(styrenesulfonate) films. A flexible rGO device shows PCE 13.8% and maintains 70% of its initial performance over 150 bending cycles. It is found that the hole‐extraction period is much smaller for the GO/methylammonium lead‐iodide perovskite (PSK) film than for the other rGO/PSK films, which contradicts their device performances. Photoluminescence and transient photoelectric decays are measured and control experiments are performed to prove that the reduction of the oxygen‐containing groups in GO significantly decreases the ability of hole extraction from PSK to rGO and also retards the charge recombination at the rGO/PSK interface. When the hole injection from PSK to GO occurs rapidly, hole propagation from GO to the indium‐doped tin oxide (ITO) substrate becomes a bottleneck to overcome, which leads to a rapid charge recombination that decreases the performance of the GO device relative to the rGO device.     

Blood‐Capillary‐Inspired,Free‐Standing,Flexible, and Low‐Cost Super‐Hydrophobic N‐CNTs@SS Cathodes for High‐Capacity,High‐Rate,and Stable Li‐Air Batteries

With the rising demand for flexible and wearable electronic devices, flexible power sources with high energy densities are required to provide a sustainable energy supply. Theoretically, rechargeable, flexible Li‐O₂/air batteries can provide extremely high specific energy densities; however, the high costs, complex synthetic methods, and inferior mechanical properties of the available flexible cathodes severely limit their practical applications. Herein, inspired by the structure of human blood capillary tissue, this study demonstrates for the first time the in situ growth of interpenetrative hierarchical N‐doped carbon nanotubes on the surface of stainless‐steel mesh (N‐CNTs@SS) for the fabrication of a self‐supporting, flexible electrode with excellent physicochemical properties via a facile and scalable one‐step strategy. Benefitting from the synergistic effects of the high electronic conductivity and stable 3D interconnected conductive network structure, the Li‐O₂ batteries obtained with the N‐CNTs@SS cathode exhibit superior electrochemical performance, including a high specific capacity (9299 mA h g^?1 at 500 mA g^?1), an excellent rate capability, and an exceptional cycle stability (up to 232 cycles). Furthermore, as‐fabricated flexible Li‐air batteries containing the as‐prepared flexible super‐hydrophobic cathode show excellent mechanical properties, stable electrochemical performance, and superior H₂O resistibility, which enhance their potential to power flexible and wearable electronic devices.     

Surface‐Modified Porous Carbon Nitride Composites as Highly Efficient Electrocatalyst for Zn‐Air Batteries

Porous carbon nitride (PCN) composites are fabricated using a top‐down strategy, followed by additions of graphene and CoS_x nanoparticles. This subsequently enhances conductivity and catalytic activity of PCN (abbreviated as CoS_x@PCN/rGO) and is achieved by one‐step sulfuration of PCN/graphene oxides (GO) composite materials. As a result, the as‐prepared CoS_x@PCN/rGO catalysts display excellent activity and stability toward both oxygen evolution and reduction reactions, surpassing electrocatalytic performance shown by state‐of‐the‐art Pt, RuO₂ and other carbon nitrides. Remarkably, the CoS_x@PCN/rGO bifunctional activity allows for applications in zinc‐air batteries, which show better rechargeability than Pt/C. The enhanced catalytic performance of CoS_x@PCN/rGO can primarily be attributed to the highly porous morphology and sufficiently exposed active sites that are favorable for electrocatalytic reactions.     

Quantum‐Dot Sensitized Solar Cells Employing Hierarchical Cu2S Microspheres Wrapped by Reduced Graphene Oxide Nanosheets as Effective Counter Electrodes

Hierarchical Cu₂S microspheres wrapped by reduced graphene oxide (RGO) nanosheets are prepared via a one‐step solvothermal process. The amount of graphene oxide used in the synthesis process has a remarkable effect on the features of Cu₂S microspheres. Compared to Pt and Cu₂S electrodes, RGO‐Cu₂S electrodes show better electrocatalytic activity, greater stability, lower charge‐transfer resistance, and higher exchange current density. As expected, RGO‐Cu₂S electrodes exhibit superior performance when functioning as counter electrodes in CdS/CdSe quantum dot‐sensitized solar cells (QDSSCs) using a polysulfide electrolyte. A power conversion efficiency up to 3.85% is achieved for the QDSSC employing an optimized RGO‐Cu₂S counter electrode, which is higher than those of the QDSSCs featuring Pt (2.14%) and Cu₂S (3.39%) counter electrodes.     

MXene‐on‐Paper Coplanar Microsupercapacitors

A simple and scalable direct laser machining process to fabricate MXene‐on‐paper coplanar microsupercapacitors is reported. Commercially available printing paper is employed as a platform in order to coat either hydrofluoric acid‐etched or clay‐like 2D Ti₃C₂ MXene sheets, followed by laser machining to fabricate thick‐film MXene coplanar electrodes over a large area. The size, morphology, and conductivity of the 2D MXene sheets are found to strongly affect the electrochemical performance due to the efficiency of the ion‐electron kinetics within the layered MXene sheets. The areal performance metrics of Ti₃C₂ MXene‐on‐paper microsupercapacitors show very competitive power‐energy densities, comparable to the reported state‐of‐the‐art paper‐based microsupercapacitors. Various device architectures are fabricated using the MXene‐on‐paper electrodes and successfully demonstrated as a micropower source for light emitting diodes. The MXene‐on‐paper electrodes show promise for flexible on‐paper energy storage devices.     

A Novel Sustainable Flour Derived Hierarchical Nitrogen‐Doped Porous Carbon/Polyaniline Electrode for Advanced Asymmetric Supercapacitors

Hierarchically porous nitrogen‐doped carbon (HPC)/polyaniline (PANI) nanowire arrays nanocomposites are synthesized by a facile in situ polymerization. 3D interconnected honeycomb‐like HPC was prepared by a cost‐effective route via one‐step carbonization using urea and alkali‐treated wheat flour as carbon precursor with a high specific surface area (1294 m² g^?1). The specific capacitances of HPC and HPC/PANI (with a surface area of 923 m² g^?1) electrode are 383 and 1080 F g^?1 in 1 m H₂SO₄, respectively. Furthermore, an asymmetric supercapacitor based on HPC/PANI as positive electrode and HPC as negative electrode is successfully assembled with a voltage window of 0–1.8 V in 1 m Na₂SO₄ aqueous electrolyte, exhibiting high specific capacitance (134 F g^?1), high energy density (60.3 Wh kg^?1) and power density (18 kW kg^?1), and excellent cycling stability (91.6% capacitance retention after 5000 cycles).     

Hollow NiCo2S4 Nanospheres Hybridized with 3D Hierarchical Porous rGO/Fe2O3 Composites toward High‐Performance Energy Storage Device

Hierarchical hollow NiCo₂S₄ microspheres with a tunable interior architecture are synthesized by a facile and cost‐effective hydrothermal method, and used as a cathode material. A three‐dimensional (3D) porous reduced graphene oxide/Fe₂O₃ composite (rGO/Fe₂O₃) with precisely controlled particle size and morphology is successfully prepared through a scalable facile approach, with well‐dispersed Fe₂O₃ nanoparticles decorating the surface of rGO sheets. The fixed Fe₂O₃ nanoparticles in graphene efficiently prevent the intermediates during the redox reaction from dissolving into the electrolyte, resulting in long cycle life. KOH activation of the rGO/Fe₂O₃ composite is conducted for the preparation of an activated carbon material–based hybrid to transform into a 3D porous carbon material–based hybrid. An energy storage device consisting of hollow NiCo₂S₄ microspheres as the positive electrode, the 3D porous rGO/Fe₂O₃ composite as the negative electrode, and KOH solution as the electrolyte with a maximum energy density of 61.7 W h kg^?1 is achieved owing to its wide operating voltage range of 0–1.75 V and the designed 3D structure. Moreover, the device exhibits a high power density of 22 kW kg^?1 and a long cycle life with 90% retention after 1000 cycles at the current density of 1 A g^?1.     

A High‐Performance Composite Electrode for Vanadium Redox Flow Batteries

A composite electrode composed of reduced graphene oxide‐graphite felt (rGO‐GF) with excellent electrocatalytic redox reversibility toward V²⁺/V³⁺ and VO²⁺/VO₂⁺ redox couples in vanadium batteries was fabricated by a facile hydrothermal method. Compared with the pristine graphite felt (GF) electrode, the rGO‐GF composite electrode possesses abundant oxygen functional groups, high electron conductivity, and outstanding stability. Its corresponding energy efficiency and discharge capacity are significantly increased by 20% and 300%, respectively, at a high current density of 150 mA cm^?2. Moreover, a discharge capacity of 20 A h L^?1 is obtained with a higher voltage efficiency (74.5%) and energy efficiency (72.0%), even at a large current density of 200 mA cm^?2. The prepared rGO‐GF composite electrode holds great promise as a high‐performance electrode for vanadium redox flow battery (VRFB).     

Alkaline Polymer Membrane‐Based Ultrathin,Flexible, and High‐Performance Solid‐State Zn‐Air Battery

The increasing demand for portable and wearable electronics requires lightweight, thin, and highly flexible power sources, for example, flexible zinc‐air batteries (ZABs). The so‐far reported flexible ZAB devices mostly remain bulky, with a design consisting of two relatively thick substrates (e.g., carbon cloths and/or metal foams) and a gel electrolyte‐coated separator in between. Herein, an ultrathin (≈0.2 mm) solid‐state ZAB with high flexibility and performance is introduced by directly forming self‐standing active layers on each surface of an alkaline polymer membrane through an ink‐casting/hot‐pressing approach. A Fe/N‐doped 3D carbon with hierarchic pores and an interconnected network structure is used as cathode electrocatalyst, so that the backing gas‐diffusion layer (e.g., carbon cloth) can be abandoned. What is further, a microstructure‐modulating method to significantly increase the FeN₄ active sites for oxygen reduction reaction is developed, thus significantly boosting the performance of the ZAB. The assembled solid‐state ZAB manifests remarkable peak power density of 250 mW cm^?3 and high capacity of 150.4 mAh cm^?3 at 8.3 mA cm^?3, as well as excellent flexibility. The new design should provide valuable opportunity to the portable and wearable electronics.     

Nanostructured Ternary Electrodes for Energy‐Storage Applications

A three‐component, flexible electrode is developed for supercapacitors over graphitized carbon fabric, utilizing γ‐MnO₂ nanoflowers anchored onto carbon nanotubes (γ‐MnO₂/CNT) as spacers for graphene nanosheets (GNs). The three‐component, composite electrode doubles the specific capacitance with respect to GN‐only electrodes, giving the highest‐reported specific capacitance (308 F g^?1) for symmetric supercapacitors containing MnO₂ and GNs using a two‐electrode configuration, at a scan rate of 20 mV s^?1. A maximum energy density of 43 W h kg^?1 is obtained for our symmetric supercapacitors at a constant discharge‐current density of 2.5 A g^?1 using GN–(γ‐MnO₂/CNT)‐nanocomposite electrodes. The fabricated supercapacitor device exhibits an excellent cycle life by retaining ≈90% of the initial specific capacitance after 5000 cycles.     

Nitrogen‐Doped CNx/CNTs Heteroelectrocatalysts for Highly Efficient Dye‐Sensitized Solar Cells

The use of polydopamine as a nitrogen containing precursor to generate catalytically active nitrogen‐doped carbon (CN_x) materials on carbon nanotubes (CNTs) is reported. These N‐doped CN_x/CNT materials display excellent electrocatalytic activity toward the reduction of triiodide electrolyte in dye‐sensitized solar cells (DSSCs). Further, the influence of various synthesis parameters on the catalytic performance of CN_x/CNTs is investigated in detail. The best performing device fabricated with the CN_x/CNTs material delivers power conversion efficiency of 7.3%, which is comparable or slightly higher than that of Pt (7.1%) counter electrode‐based DSSC. These CN_x/CNTs materials show great potential to address the issues associated with the Pt electrocatalyst including the high cost and scarcity.     

All‐Manganese‐Based Binder‐Free Stretchable Lithium‐Ion Batteries

Advanced electrode materials with bendability and stretchability are critical for the rapid development of fully flexible/stretchable lithium‐ion batteries. However, the sufficiently stretchable lithium‐ion battery is still underdeveloped that is one of the biggest challenges preventing from realizing fully deformable power sources. Here, a low‐temperature hydrothermal synthesis of a cathode material for stretchable lithium‐ion battery is reported by the in situ growth of LiMn₂O₄ (LMO) nanocrystals inside 3D carbon nanotube (CNT) film networks. The LMO/CNT film composite has demonstrated the chemical bonding between the LMO active materials and CNT scaffolds, which is the most important characteristic of the stretchable electrodes. When coupled with a wrinkled MnO_x /CNT film anode, a binder‐free, all‐manganese‐based stretchable full battery cell is assembled which delivers a high average specific capacity of ≈97 mA h g^?1 and stabilizes after over 300 cycles with an enormous strain of 100%. Furthermore, combining with other merits such as low cost, natural abundance, and environmentally friendly, the all‐manganese design is expected to accelerate the practical applications of stretchable lithium‐ion batteries for fully flexible and biomedical electronics.