Designing Active and Stable Silicon Photocathodes for Solar Hydrogen Production Using Molybdenum Sulfide Nanomaterials

Silicon is a promising photocathode for tandem photoelectrochemical water splitting devices, but efficient catalysis and long term stability remain key challenges. Here, it is demonstrated that with appropriately engineered interfaces, molybdenum sulfide nanomaterials can provide both corrosion protection and catalytic activity in silicon photocathodes. Using a thin MoS₂ surface protecting layer, MoS₂‐n⁺p Si electrodes that show no loss in performance after 100 h of operation are created. Transmission electron microscopy measurements show the atomic structure of the device surface and reveal the characteristics of the MoS₂ layer that provide both catalytic activity and excellent stability. In spite of a low concentration of exposed catalytically active sites, these electrodes possess the best performance of any precious metal‐free silicon photocathodes with demonstrated long term stability to date. To further improve efficiency, a second molybdenum sulfide nanomaterial, highly catalytically active [Mo₃S₁₃]^2? clusters, is incorporated. These photocathodes offer a promising pathway towards sustainable hydrogen production.     

Highly Efficient Ambient Temperature CO2 Photomethanation Catalyzed by Nanostructured RuO2 on Silicon Photonic Crystal Support

Sunlight‐driven catalytic hydrogenation of CO₂ is an important reaction that generates useful chemicals and fuels and if operated at industrial scales can decrease greenhouse gas CO₂ emissions into the atmosphere. In this work, the photomethanation of CO₂ over highly dispersed nanostructured RuO₂ catalysts on 3D silicon photonic crystal supports, achieving impressive conversion rates as high as 4.4 mmol g_cat^?1 h^?1 at ambient temperatures under high‐intensity solar simulated irradiation, is reported. This performance is an order of magnitude greater than photomethanation rates achieved over control samples made of nanostructured RuO₂ on silicon wafers. The high absorption and unique light‐harvesting properties of the silicon photonic crystal across the entire solar spectral wavelength range coupled with its large surface area are proposed to be responsible for the high methanation rates of the RuO₂ photocatalyst. A density functional theory study on the reaction of CO₂ with H₂ revealed that H₂ splits on the surface of the RuO₂ to form hydroxyl groups that participate in the overall photomethanation process.     

Interfacial Modification Using Hydrogenated TiO2 Electron‐Selective Layers for High‐Efficiency and Light‐Soaking‐Free Organic Solar Cells

Optimizing the interfacial contacts between the photoactive layer and the electrodes is an important factor in determining the performance of organic solar cells (OSCs). A charge‐selective layer with tailored electrical properties enhances the charge collection efficiency and interfacial stability. Here, the potential of hydrogenated TiO₂ nanoparticles (H‐TiO₂ NPs) as an efficient electron‐selective layer (ESL) material in OSCs is reported for the first time. The H‐TiO₂ is synthesized by discharge plasma in liquid at atmospheric pressure, which has the benefits of a simple one‐pot synthesis process, rapid and mild reaction conditions, and the capacity for mass production. The H‐TiO₂ exhibits high conductivity and favorable energy level formation for efficient electron extraction, providing a basis for an efficient bilayer ESL system composed of conjugated polyelectrolyte/H‐TiO₂. Thus, the enhanced charge transport and extraction efficiency with reduced recombination losses at the cathode interfacial contacts is achieved. Moreover, the OSCs composed of H‐TiO₂ are almost free of light soaking, which has been reported to severely limit the performance and stability of OSCs based on conventional TiO₂ ESLs. Therefore, H‐TiO₂ as a new efficient, stable, and cost‐effective ESL material has the potential to open new opportunities for optoelectronic devices.     

Metal–Organic Framework Templated Pd@PdO–Co3O4 Nanocubes as an Efficient Bifunctional Oxygen Electrocatalyst

The development of high‐efficiency bifunctional electrocatalyst for oxygen reduction and evolution reactions (ORR/OER) is critical for rechargeable metal–air batteries, a typical electrochemical energy storage and conversion technology. This work reports a general approach for the synthesis of Pd@PdO–Co₃O₄ nanocubes using the zeolite‐type metal–organic framework (MOF) as a template. The as‐synthesized materials exhibit a high electrocatalytic activity toward OER and ORR, which is comparable to those of commercial RuO₂ and Pt/C electrocatalysts, while its cycle performance and stability are much higher than those of commercial RuO₂ and Pt/C electrocatalysts. Various physicochemical characterizations and density functional theory calculations indicate that the favorable electrochemical performance of the Pd@PdO–Co₃O₄ nanocubes is mainly attributed to the synergistic effect between PdO and the robust hollow structure composed of interconnected crystalline Co₃O₄ nanocubes. This work establishes an efficient approach for the controlled design and synthesis of MOF‐templated hybrid nanomaterials, and provides a great potential for developing high‐performance electrocatalysts in energy storage and conversion.     

Simultaneous Improved Performance and Thermal Stability of Planar Metal Ion Incorporated CsPbI2Br All‐Inorganic Perovskite Solar Cells Based on MgZnO Nanocrystalline Electron Transporting Layer

The high thermal stability and facile synthesis of CsPbI₂Br all‐inorganic perovskite solar cells (AI‐PSCs) have attracted tremendous attention. As far as electron‐transporting layers (ETLs) are concerned, low temperature processing and reduced interfacial recombination centers through tunable energy levels determine the feasibility of the perovskite devices. Although the TiO₂ is the most popular ETL used in PSCs, its processing temperature and moderate electron mobility hamper the performance and feasibility. Herein, the highly stable, low‐temperature processed MgZnO nanocrystal‐based ETLs for dynamic hot‐air processed Mn²⁺ incorporated CsPbI2Br AI‐PSCs are reported. By holding its regular planar “n–i–p” type device architecture, the MgZnO ETL and poly(3‐hexylthiophene‐2,5‐diyl) hole transporting layer, 15.52% power conversion efficiency (PCE) is demonstrated. The thermal‐stability analysis reveals that the conventional ZnO ETL‐based AI‐PSCs show a serious instability and poor efficiency than the Mg²⁺ modified MgZnO ETLs. The photovoltaic and stability analysis of this improved photovoltaic performance is attributed to the suitable wide‐bandgap, low ETL/perovskite interface recombination, and interface stability by Mg²⁺ doping. Interestingly, the thermal stability analysis of the unencapsulated AI‐PSCs maintains >95% of initial PCE more than 400 h at 85 °C for MgZnO ETL, revealing the suitability against thermal degradation than conventional ZnO ETL.     

Countering Voltage Decay and Capacity Fading of Lithium‐Rich Cathode Material at 60 °C by Hybrid Surface Protection Layers

Li‐rich layered metal oxides have attracted much attention for their high energy density but still endure severe capacity fading and voltage decay during cycling, especially at elevated temperature. Here, facile surface treatment of Li_1.17Ni_0.17Co_0.17Mn_0.5O₂ (0.4Li₂MnO₃·0.6LiNi_1/3Co_1/3Mn_1/3O₂) spherical cathode material is designed to address these drawbacks by hybrid surface protection layers composed of Mg²⁺ pillar and Li‐Mg‐PO₄ layer. As a result, the surface coated Li‐rich cathode material exhibits much enhanced cycling stability at 60 °C, maintaining 72.6% capacity retention (180 mAh g^?1) between 3.0 and 4.7 V after 250 cycles. More importantly, 88.7% average discharge voltage retention can be obtained after the rigorous cycle test. The strategy developed here with novel hydrid surface protection effect can provide a vital approach to inhibit the undesired side reactions and structural deterioration of Li‐rich cathode materials and may also be useful for other layered oxides to increase their cycling stability at elevated temperature.     

Highly Stable Supercapacitors with Conducting Polymer Core‐Shell Electrodes for Energy Storage Applications

Conducting polymers such as polyaniline (PAni) show a great potential as pseudocapacitor materials for electrochemical energy storage applications. Yet, the cycling instability of PAni resulting from structural alteration is a major hurdle to its commercial application. Here, the development of nanostructured PAni–RuO₂ core–shell arrays as electrodes for highly stable pseudocapacitors with excellent energy storage performance is reported. A thin layer of RuO₂ grown by atomic layer deposition (ALD) on PAni nanofibers plays a crucial role in stabilizing the PAni pseudocapacitors and improving their energy density. The pseudocapacitors, which are based on optimized PAni–RuO₂ core–shell nanostructured electrodes, exhibit very high specific capacitance (710 F g^?1 at 5 mV s^?1) and power density (42.2 kW kg^?1) at an energy density of 10 Wh kg^?1. Furthermore, they exhibit remarkable capacitance retention of ≈88% after 10 000 cycles at very high current density of 20 A g^?1, superior to that of pristine PAni‐based pseudocapacitors. This prominently enhanced electrochemical stability successfully demonstrates the buffering effect of ALD coating on PAni, which provides a new approach for the preparation of metal‐oxide/conducting polymer hybrid electrodes with excellent electrochemical performance.     

Improving Interfacial Charge Recombination in Planar Heterojunction Perovskite Photovoltaics with Small Molecule as Electron Transport Layer

Although perovskite solar cells (PSCs) have emerged as a promising alternative to widely used fossil fuels, the involved high‐temperature preparation of metal oxides as a charge transport layer in most state‐of‐the‐art PSCs has been becoming a big stumbling block for future low‐temperature and large‐scale R2R manufacturing process. Such an issue strongly encourages scientists to find new type of materials to replace metal oxides. Except for expensive PC₆₁BM with unmanageable morphology and electrical properties, the past investigation on the development of low‐temperature‐processed and highly efficient electron transport layers (ETLs) has met some mixed success. In order to further enhance the performance of all‐solution‐processed PSCs, we propose a novel n‐type sulfur‐containing small molecule hexaazatrinaphtho[2,3‐c][1,2,5]thiadiazole (HATNT) with high electron mobility up to 1.73 × 10^?2 cm² V^?1 s^?1 as an ETL in planar heterojunction PSCs. A high power conversion efficiency of 18.1% is achieved, which is fully comparable with the efficiency from the control device fabricated with PC₆₁BM as ETL. This superior performance mainly attributes from more effective suppression of charge recombination at the perovskite/HATNT interface than that between the perovskite and PC₆₁ BM. Moreover, high electron mobility and strong interfacial interaction via S? I or S? Pb bonding should be also positive factors. Significantly, our results undoubtedly enable new guidelines in exploring n‐type organic small molecules for high‐performance PSCs.     

Ultrafine Pt Nanoparticle‐Decorated Pyrite‐Type CoS2 Nanosheet Arrays Coated on Carbon Cloth as a Bifunctional Electrode for Overall Water Splitting

To improve the utilization efficiency of precious metals, metal‐supported materials provide a direction for fabricating highly active and stable heterogeneous catalysts. Herein, carbon cloth (CC)‐supported Earth‐abundant CoS₂ nanosheet arrays (CoS₂/CC) are presented as ideal substrates for ultrafine Pt deposition (Pt‐CoS₂/CC) to achieve remarkable performance toward the hydrogen and oxygen evolution reactions (HER/OER) in alkaline solutions. Notably, the Pt‐CoS₂/CC hybrid delivers an overpotential of 24 mV at 10 mA cm^?2 and a mass activity of 3.89 A Pt_mg^?1, which is 4.7 times higher than that of commercial Pt/C, at an overpotential of 130 mV for catalyzing the HER. An alkali‐electrolyzer using Pt‐CoS₂/CC as a bifunctional electrode enables a water‐splitting current density of 10 mA cm^?2 at a low voltage of 1.55 V and can sustain for more than 20 h, which is superior to that of the state‐of‐the‐art Pt/C+RuO₂ catalyst. Further experimental and theoretical simulation studies demonstrate that strong electronic interaction between Pt and CoS₂ synergistically optimize hydrogen adsorption/desorption behaviors and facilitate the in situ generation of OER active species, enhancing the overall water‐splitting performance. This work highlights the regulation of interfacial and electronic synergy in pursuit of highly efficient and durable supported catalysts for hydrogen and oxygen electrocatalytic applications.     

Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells

Recently, two‐dimensional (2D) structure on three‐dimensional (3D) perovskites (graded 2D/3D) has been reported to be effective in significantly improving both efficiency and stability. However, the electrical properties of the 2D structure as a passivation layer on the 3D perovskite thin film and resistance to the penetration of moisture may vary depending on the length of the alkyl chain. In addition, the surface defects of the 2D itself on the 3D layer may also be affected by the correlation between the 2D structure and the hole conductive material. Therefore, systematic interfacial study with the alkyl chain length of long‐chained alkylammonium iodide forming a 2D structure is necessary. Herein, the 2D interfacial layers formed are compared with butylammonium iodide (BAI), octylammonium iodide (OAI), and dodecylammonium iodide (DAI) iodide on a 3D (FAPbI₃)_0.95(MAPbBr₃)_0.05 perovskite thin film in terms of the PCE and humidity stability. As the length of the alkyl chain increased from BA to OA to DA, the electron‐blocking ability and humidity resistance increase significantly, but the difference between OA and DA is not large. The PSC post‐treated with OAI has slightly higher PCE than those treated with BAI and DAI, achieving a certified stabilized efficiency of 22.9%.     

Low‐Overpotential Electrocatalytic Water Splitting with Noble‐Metal‐Free Nanoparticles Supported in a sp3 N‐Rich Flexible COF

Covalent organic frameworks (COFs) are crystalline organic polymers with tunable structures. Here, a COF is prepared using building units with highly flexible tetrahedral sp³ nitrogens. This flexibility gives rise to structural changes which generate mesopores capable of confining very small (<2 nm sized) non‐noble‐metal‐based nanoparticles (NPs). This nanocomposite shows exceptional activity toward the oxygen‐evolution reaction from alkaline water with an overpotential of 258 mV at a current density of 10 mA cm^?2. The overpotential observed in the COF‐nanoparticle system is the best in class, and is close to the current record of ≈200 mV for any noble‐metal‐free electrocatalytic water splitting system—the Fe–Co–Ni metal‐oxide‐film system. Also, it possesses outstanding kinetics (Tafel slope of 38.9 mV dec^?1) for the reaction. The COF is able to stabilize such small‐sized NP in the absence of any capping agent because of the COF–Ni(OH)₂ interactions arising from the N‐rich backbone of the COF. Density‐functional‐theory modeling of the interaction between the hexagonal Ni(OH)₂ nanosheets and the COF shows that in the most favorable configuration the Ni(OH)₂ nanosheets are sandwiched between the sp³ nitrogens of the adjacent COF layers and this can be crucial to maximizing their synergistic interactions.     

A Temperature‐Responsive Electrolyte Endowing Superior Safety Characteristic of Lithium Metal Batteries

Lithium metal batteries (LMBs) have attracted wide attention due to their high energy density. However, flammable organic carbonate electrolytes are associated with severe parasitic reactions and huge safety hazards for LMBs. Herein, a smart temperature‐responsive electrolyte is presented that demonstrates two distinct polymerization behaviors in LMBs. Through an anionic polymerization triggered by lithium metal, this electrolyte forms a favorable polymer protection layer on lithium anodes at ambient temperature, leading to a reversible Li plating/stripping behavior over 2000 h, and dendrite‐free morphology even under a current density of 10 mA cm^?2. On suffering from thermal abuse, this electrolyte can be rapidly transformed from liquid into solid by a thermal free radical polymerization, thus realizing significant improvements in safety performance without internal short‐circuit failures thus achieving safe operation even at a temperature of 150 °C. It is noted that no thermal runway occurs even at an extremely high temperature of 280 °C. It is believed that this study not only offers new valuable insights in interfacial chemistry of electrolytes, but also opens up new avenue to develop safe LMBs.     

Earth‐Abundant Iron Diboride (FeB2) Nanoparticles as Highly Active Bifunctional Electrocatalysts for Overall Water Splitting

Developing efficient, durable, and earth‐abundant electrocatalysts for both hydrogen and oxygen evolution reactions is important for realizing large‐scale water splitting. The authors report that FeB₂ nanoparticles, prepared by a facile chemical reduction of Fe²⁺ using LiBH₄ in an organic solvent, are a superb bifunctional electrocatalyst for overall water splitting. The FeB₂ electrode delivers a current density of 10 mA cm^?2 at overpotentials of 61 mV for hydrogen evolution reaction (HER) and 296 mV for oxygen evolution reaction (OER) in alkaline electrolyte with Tafel slopes of 87.5 and 52.4 mV dec^?1, respectively. The electrode can sustain the HER at an overpotential of 100 mV for 24 h and OER for 1000 cyclic voltammetry cycles with negligible degradation. Density function theory calculations demonstrate that the boron‐rich surface possesses appropriate binding energy for chemisorption and desorption of hydrogen‐containing intermediates, thus favoring the HER process. The excellent OER activity of FeB₂ is ascribed to the formation of a FeOOH/FeB₂ heterojunction during water oxidation. An alkaline electrolyzer is constructed using two identical FeB₂‐NF electrodes as both anode and cathode, which can achieve a current density of 10 mA cm^?2 at 1.57 V for overall water splitting with a faradaic efficiency of nearly 100%, rivalling the integrated state‐of‐the‐art Pt/C and RuO₂/C.     

Photo‐Electrical Characterization of Silicon Micropillar Arrays with Radial p/n Junctions Containing Passivation and Anti‐Reflection Coatings

In order to assess the contributions of anti‐reflective and passivation effects in microstructured silicon‐based solar light harvesting devices, thin layers of aluminum oxide (Al₂O₃), silicon dioxide (SiO₂), silicon‐rich silicon nitride (SiN_x), and indium tin oxide (ITO), with a thickness ranging from 45 to 155 nm, are deposited onto regularly packed arrays of silicon micropillars with radial p/n junctions. Atomic layer deposition of Al₂O₃ yields the best conformal coating over the micropillars. The fact that layers made by low‐pressure chemical vapor deposition (SiO₂ and SiN_x) are not conformally deposited on the sidewalls of the Si micropillars do not influence the photoelectrical efficiency. For ITO, a change in composition along the micropillar height is measured, which leads to poor performance. For Al₂O₃, deconvolution of the contributions of passivation and anti‐reflection to the overall efficiency gain exhibits the importance of passivation in micro/nano‐structured Si devices. Al₂O₃‐coated samples perform the best, for both n/p and p/n configured pillars, yielding (relative) increases of 116% and 37% in efficiency of coated versus non‐coated samples for p‐type and n‐type base micropillar arrays, respectively.     

Efficient Indium‐Doped TiOx Electron Transport Layers for High‐Performance Perovskite Solar Cells and Perovskite‐Silicon Tandems

In addition to a good perovskite light absorbing layer, the hole and electron transport layers play a crucial role in achieving high‐efficiency perovskite solar cells. Here, a simple, one‐step, solution‐based method is introduced for fabricating high quality indium‐doped titanium oxide electron transport layers. It is shown that indium‐doping improves both the conductivity of the transport layer and the band alignment at the ETL/perovskite interface compared to pure TiO₂, boosting the fill‐factor and voltage of perovskite cells. Using the optimized transport layers, a high steady‐state efficiency of 17.9% for CH₃NH₃PbI₃‐based cells and 19.3% for Cs_0.05(MA_0.17FA_0.83)_0.95Pb(I_0.83Br_0.17)₃‐based cells is demonstrated, corresponding to absolute efficiency gains of 4.4% and 1.2% respectively compared to TiO₂‐based control cells. In addition, a steady‐state efficiency of 16.6% for a semi‐transparent cell is reported and it is used to achieve a four‐terminal perovskite‐silicon tandem cell with a steady‐state efficiency of 24.5%.     

Photochemical Transformations in Fullerene and Molybdenum Oxide Affect the Stability of Bilayer Organic Solar Cells

Thin films of fullerene C₆₀ and molybdenum oxide (MoO₃) are ubiquitously used as the electron acceptor material and hole extraction interfacial layer for the fabrication of organic photovoltaic (OPV) cells. It is well known that light exposure induces color changes in MoO₃ (photochromism) and the formation of intermolecular bonds between C₆₀ molecules (photopolymerization). The influence of these photoinduced reactions on the long‐term stability of OPV cells, however, has not previously been studied in detail. Here, a study and discussion of the early (<5 days) aging mechanisms occurring in illuminated ITO/MoO₃/organic cyanine dye/C₆₀/Alq₃/Ag bilayer solar cells under nitrogen atmosphere is presented. A degradation process at the organic heterojunction is identified and the formation of Mo⁵⁺ species during illumination is found to adversely affect cell behavior. For these widely used materials, the results suggest that light processing is a first necessary step before OPV characteristics can be meaningfully rated.     

Highly Stable Oxygen Electrodes Enabled by Catalyst Redistribution through an In Situ Electrochemical Method

In this work, for the first time an in situ electrochemical pretreatment approach to fabricate a highly reversible oxygen electrode with redistributed ultrafine RuO₂ catalysts on a carbon nanotube (CNT) matrix is reported. The optimally pretreated RuO₂/CNT oxygen electrodes demonstrate an extremely stable cycling life, 800 times with non‐Li metal anode, under a capacity‐limited protocol of 800 mAh g^?1 in an ether‐based electrolyte in an O₂ environment. The highly stable activity of ultrafine RuO₂ catalysts in oxygen reduction and evolution processes originates from the synergetic effect of greatly reduced size of catalyst (<2 nm) and uniform redistribution of catalyst particles after the in situ electrochemical pretreatment process. The pretreatment method discovered in this work can not only significantly enhance the activity/efficiency of the catalysts used for air electrodes but can also be widely applied to other electro‐catalysis systems.     

Efficient Vacuum‐Deposited Tandem Organic Solar Cells with Fill Factors Higher Than Single‐Junction Subcells

Efficient vacuum‐deposited tandem organic photovoltaic cells (TOPVs) composed of pristine fullerenes as the acceptors and two complementary absorbing donors, 2‐((2‐(5‐(4‐(diphenylamino)phenyl)thieno[3,2‐b]thiophen‐2‐yl)thiazol‐5‐yl)methylene)malononitrile for the visible absorption and 2‐((7‐(5‐(dip‐tolylamino)thiophen‐2‐yl)benzo[c]‐[1,2,5]thiadiazol‐4‐yl)methylene)malononitrile for the near‐infrared absorption, are reported. Two subcells are connected by the interconnection unit (ICU) composed of electron‐transporting layer/metal/p‐doped hole‐transporting layer. The p‐doped layer in the ICU enables increasing the short‐circuit current density (J _SC) of TOPVs by tuning the relative position of subcells in the tandem devices to have the maximum optical field distribution response, which is well matched with theoretical calculation. Moreover, the introduction of the doped layer benefits to the higher fill factor (FF) of the consisting subcells without losing open‐circuit voltage (V _OC) even with the thick active layers. As a result, power conversion efficiency of 9.2% is achieved with higher FF of 0.62 than that of single‐junction subcells (0.54, 0.57), J _SC of 8.7 mA cm^?2, and V _OC of 1.71 V using 80 nm thick active layers in both subcells.     

Ecofriendly Chemical Activation of Overlithiated Layered Oxides by DNA‐Wrapped Carbon Nanotubes

Despite their exceptionally high capacity, overlithiated layered oxides (OLO) have not yet been practically used in lithium‐ion battery cathodes due to necessary toxic/complex chemical activation processes and unsatisfactory electrochemical reliability. Here, a new class of ecofriendly chemical activation strategy based on amphiphilic deoxyribose nucleic acid (DNA)‐wrapped multiwalled carbon nanotubes (MWCNT) is demonstrated. Hydrophobic aromatic bases of DNA have a good affinity for MWCNT via noncovalent π–π stacking interactions, resulting in core (MWCNT)‐shell (DNA) hybrids (i.e., DNA@MWCNT) featuring the predominant presence of hydrophilic phosphate groups (coupled with Na⁺) in their outmost layers. Such spatially rearranged Na⁺–phosphate complexes of the DNA@MWCNT efficiently extract Li⁺ from monoclinic Li₂MnO₃ of the OLO through cation exchange reaction of Na⁺–Li⁺, thereby forming Li₄Mn₅O₁₂‐type spinel nanolayers on the OLO surface. The newly formed spinel nanolayers play a crucial role in improving the structural stability of the OLO and suppressing interfacial side reactions with liquid electrolytes, eventually providing significant improvements in the charge/discharge kinetics, cyclability, and thermal stability. This beneficial effect of the DNA@MWCNT‐mediated chemical activation is comprehensively elucidated by an in‐depth structural/electrochemical characterization.     

Superior Oxygen Electrocatalysis on RuSex Nanoparticles for Rechargeable Air Cathodes

A one‐step, facile supercritical‐ethanol‐fluid synthesis of Se‐modified Ru nanoparticles nucleated on carbon defects is reported, and it is demonstrated that these nanoparticles provide, with >70% efficiency at 1 A g^?1, a highly active and reversible oxygen‐reduction/oxygen‐evolution reaction on an air cathode in a nonaqueous electrolyte. The Se modification not only prevents Ru oxidation during charge/discharge cycling, but also improves the catalytic activity by promoting Li₂O₂ versus Li₂O deposited on the Ru particles during discharge. A computational calculation with density functional theory supports the role of a larger electron transfer to the oxygen of Li₂O₂ adsorbed on a surface layer of RuSe_2?δ than on a surface layer of RuO₂, thereby shifting the more stable adsorbent from Li₂O to Li₂O₂.