All‐Organic Battery Composed of Thianthrene‐ and TCAQ‐Based Polymers

An all‐organic battery consisting of two redox‐polymers, namely poly(2‐vinylthianthrene) and poly(2‐methacrylamide‐TCAQ) is assembled. This all‐organic battery shows excellent performance characteristics, namely flat discharge plateaus, an output voltage exceeding 1.3 V, and theoretical capacities of both electrodes higher than 100 mA h g^?1. Both organic electrode materials are synthesized in two respective three synthetic steps using the free‐radical polymerization technique. Li‐organic batteries manufactured from these polymers prove their suitability as organic electrode materials. The cathode material poly(2‐vinylthianthrene) (3) displays a discharging plateau at 3.95 V versus Li⁺/Li and a discharge capacity of 105 mA h g^?1, corresponding to a specific energy of about 415 mW h g^?1. The anode material poly(2‐methacrylamide‐TCAQ) (7) exhibits an initial discharge capacity of 130 mA h g^?1, corresponding to 94% material activity. The combination of both materials results in an all‐organic battery with a discharge voltage of 1.35 V and an initial discharge capacity of 105 mA h g^?1 (95% material activity).     

Mesoporous TiO2‐Sn/C Core‐Shell Nanowire Arrays as High‐Performance 3D Anodes for Li‐Ion Batteries

Three‐dimensional mesoporous TiO₂‐Sn/C core‐shell nanowire arrays are prepared on Ti foil as anodes for lithium‐ion batteries. Sn formed by a reduction of SnO₂ is encapsulated into TiO₂ nanowires and the carbon layer is coated onto it. For additive‐free, self‐supported anodes in Li‐ion batteries, this unique core‐shell composite structure can effectively buffer the volume change, suppress cracking, and improve the conductivity of the electrode during the discharge‐charge process, thus resulting in superior rate capability and excellent long‐term cycling stability. Specifically, the TiO₂‐Sn/C nanowire arrays display rechargeable discharge capacities of 769, 663, 365, 193, and 90 mA h g^?1 at 0.1C, 0.5C, 2C 10C, and 30C, respectively (1C = 335 mA g^?1). Furthermore, the TiO₂‐Sn/C nanowire arrays exhibit a capacity retention rate of 84.8% with a discharge capacity of over 160 mA h g^?1, even after 100 cycles at a high current rate of 10C.     

Open‐Structured V2O5·nH2O Nanoflakes as Highly Reversible Cathode Material for Monovalent and Multivalent Intercalation Batteries

The high‐capacity cathode material V₂O₅·n H₂O has attracted considerable attention for metal ion batteries due to the multielectron redox reaction during electrochemical processes. It has an expanded layer structure, which can host large ions or multivalent ions. However, structural instability and poor electronic and ionic conductivities greatly handicap its application. Here, in cell tests, self‐assembly V₂O₅·n H₂O nanoflakes shows excellent electrochemical performance with either monovalent or multivalent cation intercalation. They are directly grown on a 3D conductive stainless steel mesh substrate via a simple and green hydrothermal method. Well‐layered nanoflakes are obtained after heat treatment at 300 °C (V₂O₅·0.3H₂O). Nanoflakes with ultrathin flower petals deliver a stable capacity of 250 mA h g^?1 in a Li‐ion cell, 110 mA h g^?1 in a Na‐ion cell, and 80 mA h g^?1 in an Al‐ion cell in their respective potential ranges (2.0–4.0 V for Li and Na‐ion batteries and 0.1–2.5 V for Al‐ion battery) after 100 cycles.     

High‐Voltage Oxygen‐Redox‐Based Cathode for Rechargeable Sodium‐Ion Batteries

Recently, anionic‐redox‐based materials have shown promising electrochemical performance as cathode materials for sodium‐ion batteries. However, one of the limiting factors in the development of oxygen‐redox‐based electrodes is their low operating voltage. In this study, the operating voltage of oxygen‐redox‐based electrodes is raised by incorporating nickel into P2‐type Na_2/3[Zn_0.3Mn_0.7]O₂ in such a way that the zinc is partially substituted by nickel. As designed, the resulting P2‐type Na_2/3[(Ni_0.5Zn_0.5)_0.3Mn_0.7]O₂ electrode exhibits an average operating voltage of 3.5 V and retains 95% of its initial capacity after 200 cycles in the voltage range of 2.3–4.6 V at 0.1C (26 mA g^?1). Operando X‐ray diffraction analysis reveals the reversible phase transition: P2 to OP4 phase on charge and recovery to the P2 phase on discharge. Moreover, ex situ X‐ray absorption near edge structure and X‐ray photoelectron spectroscopy studies reveal that the capacity is generated by the combination of Ni²⁺/Ni⁴⁺ and O^2?/O^1? redox pairs, which is supported by first‐principles calculations. It is thought that this kind of high voltage redox species combined with oxygen redox could be an interesting approach to further increase energy density of cathode materials for not only sodium‐based rechargeable batteries, but other alkali‐ion battery systems.     

Metal–Organic Frameworks‐Derived Tunnel Structured Co3(PO4)2@C as Cathode for New Generation High‐Performance Al‐Ion Batteries

Despite great progress in aluminum ion batteries (AIBs), the commercialization and performance improvement of AIBs‐based carbon cathodes is greatly impeded by sluggish intercalation/extraction and redox kinetics due to large‐sized AlCl₄^? anions. Phosphates with tunnel channels and much larger d‐spacing than the radius of Al³⁺ could be an alternative candidate as a cathode for potential high‐performance AIBs. Herein, elaborately designed porous tunnel structured Co₃(PO₄)₂@C composites derived from ZIF‐67 as AIBs cathodes are demonstrated, showing increased active sites, high ionic mobility, and high Al³⁺ ion diffusion coefficient, leading to remarkably enhanced discharge–charge redox reaction kinetics. Furthermore, the carbon shell and porous structure performs as armor to alleviate volume change and maintain the structure integrity of the cathodes. As expected, the rationally constructed Co₃(PO₄)₂@C composite exhibits a superior capacity of 111 mA h g^?1 at a high current density of 6 A g^?1 and 151 mA h g^?1 at 2 A g^?1 after 500 cycles with capacity decay of 0.02% per cycle. This innovative strategy could be a big step forward for long‐term cycle stable AIBs and reveals significant insights into the redox reaction mechanism for high‐performance AIBs based on Al³⁺ rather than large‐sized AlCl₄^?.     

Electrospun NaVPO4F/C Nanofibers as Self‐Standing Cathode Material for Ultralong Cycle Life Na‐Ion Batteries

NaVPO₄F has received a great deal of attention as cathode material for Na‐ion batteries due to its high theoretical capacity (143 mA h g^?1), high voltage platform, and structural stability. Novel NaVPO₄F/C nanofibers are successfully prepared via a feasible electrospinning method and subsequent heat treatment as self‐standing cathode for Na‐ion batteries. Based on the morphological and microstructural characterization, it can be seen that the NaVPO₄F/C nanofibers are smooth and continuous with NaVPO₄F nanoparticles (≈6 nm) embedded in porous carbon matrix. For Na‐storage, this electrode exhibits extraordinary electrochemical performance: a high capacity (126.3 mA h g^?1 at 1 C), a superior rate capability (61.2 mA h g^?1 at 50 C), and ultralong cyclability (96.5% capacity retention after 1000 cycles at 2 C). 1D NaVPO₄F/C nanofibers that interlink into 3D conductive network improve the conductivity of NaVPO₄F, and effectively restrain the aggregation of NaVPO₄F particles during charge/discharge process, leading to the high performance.     

Construction of Hierarchical K1.39Mn3O6 Spheres via AlF3 Coating for High‐Performance Potassium‐Ion Batteries

Potassium‐ion batteries are attracting great interest for emerging large‐scale energy storage owing to their advantages such as low cost and high operational voltage. However, they are still suffering from poor cycling stability and sluggish thermodynamic kinetics, which inhibits their practical applications. Herein, the synthesis of hierarchical K_1.39Mn₃O₆ microspheres as cathode materials for potassium‐ion batteries is reported. Additionally, an effective AlF₃ surface coating strategy is applied to further improve the electrochemical performance of K_1.39Mn₃O₆ microspheres. The as‐synthesized AlF₃ coated K_1.39Mn₃O₆ microspheres show a high reversible capacity (about 110 mA h g^?1 at 10 mA g^?1), excellent rate capability, and cycling stability. Galvanostatic intermittent titration technique results demonstrate that the increased diffusion kinetics of potassium‐ion insertion and extraction during discharge and charge processes benefit from both the hierarchical sphere structure and surface modification. Furthermore, ex situ X‐ray diffraction measurements reveal that the irreversible structure evolution can be significantly mitigated via surface modification. This work sheds light on rational design of high‐performance cathode materials for potassium‐ion batteries.     

Soft Carbon as Anode for High‐Performance Sodium‐Based Dual Ion Full Battery

Sodium‐based dual ion full batteries (NDIBs) are reported with soft carbon as anode and graphite as cathode for the first time. The NDIBs operate at high discharge voltage plateau of 3.58 V, with superior discharge capacity of 103 mA h g^?1, excellent rate performance, and long‐term cycling stability over 800 cycles with capacity retention of 81.8%. The mechanism of Na⁺ and PF₆^? insertion/desertion during the charging/discharging processes is proposed and discussed in detail, with the support of various spectroscopies.     

Metal‐Organic Framework Cathodes Based on a Vanadium Hexacyanoferrate Prussian Blue Analogue for High‐Performance Aqueous Rechargeable Batteries

Despite the unique advantages of the metal‐organic framework of Prussian blue analogues (PBAs), including a favorable crystallographic structure and facile diffusion kinetics, the capacity of PBAs delivered in aqueous systems has been limited to ≈60 mA h g^?1 because only single species of transition metal ions incorporated into the PBAs are electrochemically activated. Herein, vanadium hexacyanoferrate (V/Fe PBA) is proposed as a breakthrough to this limitation, and its electrochemical performance as a cathode for aqueous rechargeable batteries (ARBs) is investigated for the first time. V/Fe PBAs are synthesized by a simple co‐precipitation method with optimization of the acidity and molar ratios of precursor solutions. The V/Fe PBAs provide an improved capacity of 91 mA h^?1 under a current density of 110 mA g^?1 (C‐rate of ≈1.2 C), taking advantage of the multiple‐electron redox reactions of V and Fe ions. Under an extremely fast charge/discharge rate of 3520 mA g^?1, the V/Fe PBA exhibits a sufficiently high discharge capacity of 54 mA h g^?1 due to its opened structure and 3D hydrogen bonding networks. V/Fe PBA‐based ARBs are the most promising candidates for large‐scale stationary energy storage systems due to their high electrochemical performance, reasonable cost, and high efficiency.     

NiFe Layered Double Hydroxide Nanoparticles on Co,N‐Codoped Carbon Nanoframes as Efficient Bifunctional Catalysts for Rechargeable Zinc–Air Batteries

The future large‐scale deployment of rechargeable zinc–air batteries requires the development of cheap, stable, and efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this work, a highly efficient bifunctional electrocatalyst is prepared by depositing 3–5 nm NiFe layered double hydroxide (NiFe‐LDH) nanoparticles on Co,N‐codoped carbon nanoframes (Co,N‐CNF). The NiFe‐LDH/Co,N‐CNF electrocatalyst displayed an OER overpotential of 0.312 V at 10 mA cm^?2 and an ORR half‐wave potential of 0.790 V. The outstanding performance of the electrocatalyst is attributable to the high electrical conductivity and excellent ORR activity of Co,N‐CNF, together with the strong anchoring of 3–5 nm NiFe‐LDH nanoparticles, which preserves active sites. Inspired by the excellent OER and ORR performance of NiFe‐LDH/Co,N‐CNF, a prototype rechargeable zinc–air battery is developed. The battery exhibited a low discharge–charge voltage gap (1.0 V at 25 mA cm^?2) and long‐term cycling durability (over 80 h), and superior overall performance to a counterpart battery constructed using a mixture of IrO₂ and Pt/C as the cathode. The strategy developed here can easily be adapted to synthesize other bifunctional CNF‐based hybrid electrodes for ORR and OER, providing a practical route to more efficient rechargeable zinc–air batteries.     

Na‐Mn‐O Nanocrystals as a High Capacity and Long Life Anode Material for Li‐Ion Batteries

Searching for a new material to build the next‐generation rechargeable lithium‐ion batteries (LIBs) with high electrochemical performance is urgently required. Owing to the low‐cost, non‐toxicity, and high‐safety, the family of manganese oxide including the Na‐Mn‐O system is regarded as one of the most promising electrode materials for LIBs. Herein, a new strategy is carried out to prepare a highly porous and electrochemically active Na_0.55Mn₂O₄·1.5H₂O (SMOH) compound. As an anode material, the Na‐Mn‐O nanocrystal material dispersed within a carbon matrix manifests a high reversible capacity of 1015.5 mA h g^?1 at a current density of 0.1 A g^?1. Remarkably, a considerable capability of 546.8 mA h g^?1 remains even after 2000 discharge/charge cycles at the higher current density of 4 A g^?1, indicating a splendid cyclability. The exceptional electrochemical properties allow SMOH to be a promising anode material toward LIBs.     

Black Phosphorus Quantum Dot/Ti3C2 MXene Nanosheet Composites for Efficient Electrochemical Lithium/Sodium‐Ion Storage

The exploration of new and efficient energy storage mechanisms through nanostructured electrode design is crucial for the development of high‐performance rechargeable batteries. Herein, black phosphorus quantum dots (BPQDs) and Ti₃C₂ nanosheets (TNSs) are employed as battery and pseudocapacitive components, respectively, to construct BPQD/TNS composite anodes with a novel battery‐capacitive dual‐model energy storage (DMES) mechanism for lithium‐ion and sodium‐ion batteries. Specifically, as a battery‐type component, BPQDs anchored on the TNSs are endowed with improved conductivity and relieved stress upon cycling, enabling a high‐capacity and stable energy storage. Meanwhile, the pseudocapacitive TNS component with further atomic charge polarization induced by P? O? Ti interfacial bonds between the two components allows enhanced charge adsorption and efficient interfacial electron transfer, contributing a higher pseudocapacitive value and fast energy storage. The DMES mechanism is evidenced by substantial characterizations of X‐ray photoelectron spectroscopy and X‐ray absorption fine structure spectroscopy, density functional theory calculations, and kinetics analyses. Consequently, the composite electrode exhibits superior battery performance, especially for lithium storage, such as high capacity (910 mAh g^?1 at 100 mA g^?1), long cycling stability (2400 cycles with a capacity retention over 100%), and high rate capability, representing the best comprehensive battery performance in BP‐based anodes to date.     

Fabrication of Hierarchical Potassium Titanium Phosphate Spheroids: A Host Material for Sodium‐Ion and Potassium‐Ion Storage

Identifying suitable electrode materials for sodium‐ion and potassium‐ion storage holds the key to the development of earth‐abundant energy‐storage technologies. This study reports an anode material based on self‐assembled hierarchical spheroid‐like KTi₂(PO₄)₃@C nanocomposites synthesized via an electrospray method. Such an architecture synergistically combines the advantages of the conductive carbon network and allows sufficient space for the infiltration of the electrolyte from the porous structure, leading to an impressive electrochemical performance, as reflected by the high reversible capacity (283.7 mA h g^?1 for Na‐ion batteries; 292.7 mA h g^?1 for K‐ion batteries) and superior rate capability (136.1 mA h g^?1 at 10 A g^?1 for Na‐ion batteries; 133.1 mA h g^?1 at 1 A g^?1 for K‐ion batteries) of the resulting material. Moreover, the different ion diffusion behaviors in the two systems are revealed to account for the difference in rate performance. These findings suggest that KTi₂(PO₄)₃@C is a promising candidate as an anode material for sodium‐ion and potassium‐ion batteries. In particular, the present synthetic approach could be extended to other functional electrode materials for energy‐storage materials.     

Single‐Step Spray Printing of Symmetric All‐Organic Solid‐State Batteries Based on Porous Textile Dye Electrodes

A symmetric solid‐state battery based on organic porous electrodes is fabricated using scalable spray‐printing. The active electrode material is based on a textile dye (disperse blue 134 anthraquinone) and is capable of forming divalent cations and anions in oxidation and reduction processes. The resulting molecule can be used in both negative and positive electrode reactions. After spray printing an inter‐connected pore honeycomb electrode, a solid‐state electrolyte (σ_Li: × 10^?4 S cm^?1) based on a polymeric ionic liquid is spray‐printed as a second layer and infiltrated through the porous electrodes. A symmetric all‐organic battery is then formed with the addition of another identical set of electrode and electrolyte layers. Both density functional theory calculations and charge‐discharge profiles show that the potentials for the negative and positive electrode reactions are amongst the lowest (≈2.0 V vs Li) and the highest (≈3.5 V vs Li), respectively, for quinone‐type molecules. Over the C‐rate range 0.2 to 5 C, the battery has a discharge cell voltage of more than 1 V even up to 250 charge‐discharge cycles and capacities are in the range 50–80 mA h g^?1 at 0.5 C.     

H2V3O8 Nanowire/Graphene Electrodes for Aqueous Rechargeable Zinc Ion Batteries with High Rate Capability and Large Capacity

Aqueous rechargeable zinc ion batteries are considered a promising candidate for large‐scale energy storage owing to their low cost and high safety nature. A composite material comprised of H₂V₃O₈ nanowires (NWs) wrapped by graphene sheets and used as the cathode material for aqueous rechargeable zinc ion batteries is developed. Owing to the synergistic merits of desirable structural features of H₂V₃O₈ NWs and high conductivity of the graphene network, the H₂V₃O₈ NW/graphene composite exhibits superior zinc ion storage performance including high capacity of 394 mA h g^?1 at 1/3 C, high rate capability of 270 mA h g^?1 at 20 C and excellent cycling stability of up to 2000 cycles with a capacity retention of 87%. The battery offers a high energy density of 168 W h kg^?1 at 1/3 C and a high power density of 2215 W kg^?1 at 20 C (calculated based on the total weight of H₂V₃O₈ NW/graphene composite and the theoretically required amount of Zn). Systematic structural and elemental characterization confirm the reversible Zn²⁺ and water cointercalation electrochemical reaction mechanism. This work brings a new prospect of designing high‐performance aqueous rechargeable zinc ion batteries for grid‐scale energy storage.     

A Flexible Solid‐State Aqueous Zinc Hybrid Battery with Flat and High‐Voltage Discharge Plateau

The migration of zinc‐ion batteries from alkaline electrolyte to neutral or mild acidic electrolyte promotes research into their flexible applications. However, discharge voltage of many reported zinc‐ion batteries is far from satisfactory. On one hand, the battery voltage is substantially restricted by the narrow voltage window of aqueous electrolytes. On the other hand, many batteries yield a low‐voltage discharge plateau or show no plateau but capacitor‐like sloping discharge profiles. This impacts the battery's practicability for flexible electronics where stable and consistent high energy is needed. Herein, an aqueous zinc hybrid battery based on a highly concentrated dual‐ion electrolyte and a hierarchically structured lithium‐ion‐intercalative LiVPO₄F cathode is developed. This hybrid battery delivers a flat and high‐voltage discharge plateau of nearly 1.9 V, ranking among the highest reported values for all aqueous zinc‐based batteries. The resultant high energy density of 235.6 Wh kg^?1 at a power density of 320.8 W kg^?1 also outperforms most reported zinc‐based batteries. A designed solid‐state and long‐lasting hydrogel electrolyte is subsequently applied in the fabrication of a flexible battery, which can be integrated into various flexible devices as powerful energy supply. The idea of designing such a hybrid battery offers a new strategy for developing high‐voltage and high‐energy aqueous energy storage systems.     

Design and Performance of Rechargeable Sodium Ion Batteries,and Symmetrical Li‐Ion Batteries with Supercapacitor‐Like Power Density Based upon Polyoxovanadates

The polyanion Li₇V₁₅O₃₆(CO₃) is a nanosized molecular cluster (≈1 nm in size), that has the potential to form an open host framework with a higher surface‐to‐bulk ratio than conventional transition metal oxide electrode materials. Herein, practical rechargeable Na‐ion batteries and symmetric Li‐ion batteries are demonstrated based on the polyoxovanadate Li₇V₁₅O₃₆(CO₃). The vanadium centers in {V₁₅O₃₆(CO₃)} do not all have the same V^IV/V redox potentials, which permits symmetric devices to be created from this material that exhibit battery‐like energy density and supercapacitor‐like power density. An ultrahigh specific power of 51.5 kW kg^?1 at 100 A g^?1 and a specific energy of 125 W h kg^?1 can be achieved, along with a long cycling life (>500 cycles). Moreover, electrochemical and theoretical studies reveal that {V₁₅O₃₆(CO₃)} also allows the transport of large cations, like Na⁺, and that it can serve as the cathode material for rechargeable Na‐ion batteries with a high specific capacity of 240 mA h g^?1 and a specific energy of 390 W h kg^?1 for the full Na‐ion battery. Finally, the polyoxometalate material from these electrochemical energy storage devices can be easily extracted from spent electrodes by simple treatment with water, providing a potential route to recycling of the redox active material.     

A High‐Energy NASICON‐Type Cathode Material for Na‐Ion Batteries

Over the last decade, Na‐ion batteries have been extensively studied as low‐cost alternatives to Li‐ion batteries for large‐scale grid storage applications; however, the development of high‐energy positive electrodes remains a major challenge. Materials with a polyanionic framework, such as Na superionic conductor (NASICON)‐structured cathodes with formula Na_xM₂(PO₄)₃, have attracted considerable attention because of their stable 3D crystal structure and high operating potential. Herein, a novel NASICON‐type compound, Na₄MnCr(PO₄)₃, is reported as a promising cathode material for Na‐ion batteries that deliver a high specific capacity of 130 mAh g^?1 during discharge utilizing high‐voltage Mn^2+/3+ (3.5 V), Mn^3+/4+ (4.0 V), and Cr^3+/4+ (4.35 V) transition metal redox. In addition, Na₄MnCr(PO₄)₃ exhibits a high rate capability (97 mAh g^?1 at 5 C) and excellent all‐temperature performance. In situ X‐ray diffraction and synchrotron X‐ray diffraction analyses reveal reversible structural evolution for both charge and discharge.     

Realizing Interfacial Electronic Interaction within ZnS Quantum Dots/N‐rGO Heterostructures for Efficient Li–CO2 Batteries

With high theoretical energy density, rechargeable metal–gas batteries (e.g., Li–CO₂ battery) are considered as one of the most promising energy storage devices. However, their practical applications are hindered by the sluggish reaction kinetics and discharge product accumulation during battery cycling. Currently, the solutions focus on exploration of new catalysts while the thorough understanding of their underlying mechanisms is often ignored. Herein, the interfacial electronic interaction within rationally designed catalysts, ZnS quantum dots/nitrogen‐doped reduced graphene oxide (ZnS QDs/N‐rGO) heterostructures, and their effects on transformation and deposition of discharge products in the Li–CO₂ battery are revealed. In this work, the interfacial interaction can both enhance the catalytic activities of ZnS QDs/N‐rGO heterostructures and induce the nucleation of discharge products to form a homogeneous Li₂CO₃/C film with excellent electronic transmission and high electrochemical activities. When the batteries cycle within a cutoff specific capacity of 1000 mAh g^?1 at a current density of 400 mA g^?1, the cycling performance of the Li–CO₂ battery using a ZnS QDs/N‐rGO cathode is over 3 and 9 times than those coupled with a ZnS nanosheets (NST)/N‐rGO cathode and a N‐rGO cathode, respectively. This work provides comprehensive understandings on designing catalysts for Li–CO₂ batteries as well as other rechargeable metal–gas batteries.     

Integrated Configuration Design for Ultrafast Rechargeable Dual‐Ion Battery

In this work, an integrated dual‐ion battery design is reported with active materials, current collectors, and separator, assembled in one flexible component. An aluminum film is deposited directly onto one side of the 3D porous glass fiber separator to form a porous anode. Cathode active materials are loaded on the other side of the separator with aluminum film deposited on the top as current collector. This design demonstrates ultrafast charge/discharge rate up to 120 C while maintaining high capacity of 116.1 mA h g^?1. Moreover, long‐term stability of over 1500 cycles at a high rate of 60 C is achieved. The estimated energy density remains as high as 232.6 W h kg^?1 at an ultrahigh power density of 22634.5 W kg^?1.