Bio‐Nanotechnology in High‐Performance Supercapacitors

The use of bio‐nanotechnology for the fabrication of diverse functional nanomaterials with precisely controlled morphologies and microstructures is attracting considerable attention due to its sustainability and renewability. As one of the key energy storage devices, supercapacitor (SC) requires the active electrode material to have high specific surface area, interconnected porous structure, excellent electronic conductivity, and appropriate heteroatom doping for promoting the transfer of electrons and electrolyte ions. The combination of bio‐technology and SC will open up a new avenue for the large‐scale fabrication of high performance functional energy storage devices. In this review, the most state‐of‐the‐art research progress in bio‐nanotechnological fabrication of different nanomaterials, including carbon materials, metal oxides, conducting polymers, and their corresponding composites are reviewed with the following three bio‐nanotechnical approaches covered: (1) biomass carbonization technologies; (2) bio‐template methods; and (3) bio‐complex technologies, while also highlighting their applications as functional SC electrodes.     

Bio‐ und Geotop Einhornhöhle

The “Unicorn Cave” Between the towns of Herzberg and Bad Lauterberg exists an important area of Permian dolomite formations with caves and special cliffs of dolomite rock with the particular location Unicorn Cave in the centre. Even the name of this cave sounds mysterious. For hundreds of years, digging for the bones of the unicorn had been the foremost interest. The cave – home of thousands of cave‐bears – has been famous and well known even far beyond the Harz‐mountains.     

Bio‐based extraction and stabilization of anthocyanins

This work reports a novel method of recovering anthocyanin compounds from highly‐pigmented grapes via a fermentation based approach. It was hypothesized that batch growth of Zymomonas mobilis on simple medium would produce both ethanol and enzymes/biomass‐acting materials, the combination of which will provide a superior extraction when compared to simple alcohol extraction. To examine this hypothesis, Z. mobilis was fermented in a batch consisting of mashed Vitis vinifera and glucose, and the recovered anthocyanin pool was compared to that recovered via extraction with ethanol. Data indicated higher amounts of anthocyanins were recovered when compared to simple solvent addition. Additionally, the percent polymeric form of the anthocyanins could be manipulated by the level of aeration maintained in the fermentation. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:601–605, 2016     

Bio‐palladium: from metal recovery to catalytic applications

While precious metals are available to a very limited extent, there is an increasing demand to use them as catalyst. This is also true for palladium (Pd) catalysts and their sustainable recycling and production are required. Since Pd catalysts exist nowadays mostly under the form of nanoparticles, these particles need to be produced in an environment‐friendly way. Biological synthesis of Pd nanoparticles (‘bio‐Pd’) is an innovative method for both metal recovery and nanocatalyst synthesis. This review will discuss the different bio‐Pd precipitating microorganisms, the applications of the catalyst (both for environmental purposes and in organic chemistry) and the state of the art of the reactors based on the bio‐Pd concept. In addition, some main challenges are discussed, which need to be overcome in order to create a sustainable nanocatalyst. Finally, some outlooks for bio‐Pd in environmental technology are presented.     

Bio‐mitigation of carbon following afforestation of abandoned salinized farmland

As the global demand for food continues to increase, the displacement of food production by using agricultural land for carbon mitigation, via either carbon sequestration, bioenergy or biofuel is a concern. An alternative approach is to target abandoned salinized farmland for mitigation purposes. Australia, for example, has 17 million ha of farmland that is already or could become saline. At a representative, salinized, low rainfall (350 mm yr^?1) site at Wickepin, Western Australia, we demonstrate that afforestation can mitigate carbon emissions through either providing a feedstock for bioenergy or second generation biofuel production and produce salt‐tolerant fodder for livestock. A range of factors markedly affect this mitigation. These include hydrological conditions such as salinity, site factors such as slope position and soil properties and a range of silvicultural factors such as species, planting density and age of the planting. High density (2000 stems ha^?1) plantings of Eucalyptus occidentalis Endl. produced a mean total biomass of 4.6 t ha^?1 yr^?1 (8.5 t CO₂‐e ha^?1 yr^?1) averaged over 8 years. Atriplex nummularia Lindl. produced a mean total biomass of 3.8 t ha^?1 yr^?1 (6.9 t CO₂‐e ha^?1 yr^?1) averaged over 4 years and approximately 1.9 t ha^?1 yr^?1 of edible dry matter annually to 8 years of age. With differences in salt tolerance between E. occidentalis and A. nummularia, we propose an integrated approach to treating salinized sites that takes salinity gradients into account, replicates natural wetland ecosystems and produces both fodder and biomass. Continued mitigation is expected as the stands mature, assuming that growth is not affected by the accumulation of salt in the soil profile. Such carbon mitigation could potentially be applied to salinized farmland globally, and this could thus represent a major contribution to global carbon mitigation without competing with food production.     

Bio‐antifelting of wool based on mild methanolic potassium hydroxide pretreatment

Covalently bound lipids cover the wool surface and make enzymatic degradation of wool scales very difficult. In this paper, methanolic potassium hydroxide (MPH) pretreatment was used prior to enzymatic treatment of wool with protease, aiming at hydrolyzing the outmost lipids on the wool surface and promoting the subsequent proteolytic reaction. The efficacy of lipid removal from the fiber surface and the properties of the protease‐treated wool were evaluated. The results indicated that mild MPH pretreatment with 0.10 mol/L MPH for 10 min improved the wettability of the wool without adverse impacts on its mechanical properties. The wetting time and area shrinkage of the wool fabric reached 0.5 s and 5.6%, respectively, and the strength loss was within the acceptable range. Pretreatment with high concentrations of MPH for longer times led to significant damage to the wool fibers and caused heavy strength loss, without improving the antifelting properties after protease treatment. Thus, the combination of mild MPH and protease treatments endowed the wool with desirable properties in contrast to the treatment with protease alone.     

Bio‐electrospraying: A potentially safe technique for delivering progenitor cells

Bio‐electrospraying is fast becoming an attractive tool for in situ cell delivery into scaffolds for tissue engineering applications, with several cell types been successfully electrosprayed. Bone marrow derived mesenchymal progenitor/stem cells (BMSC), which are an important cell source for tissue engineering, have not been explored in detail and the effect of electrospraying on their “stemness” is not known. This study therefore investigates the effects of electrospraying on BMSC viability, proliferation, and multilineage differentiation potential. Electrospraying a BMSC suspension at flow rate of 6 mL/h and voltages of 7.5–15 kV could successfully generate a continuous, stable and linearly directed electrospray of cells. Morphological observation, trypan blue tests and alamar blue based metabolic assays revealed about 88% of these electrosprayed cells were viable, and proliferated at rates similar to native BMSCs. However, at higher voltages, electrospraying became unstable and reduced cell viability, possibly due to electrical or thermal damage to the cells. BMSCs electrosprayed at 7.5 kV also retained their multipotency and could be successfully differentiated into adipogenic, chondrogenic, and osteogenic lineages, demonstrating similar morphology and gene expression levels as induced native BMSCs. These results indicate that bio‐electrospraying could be safely used as a progenitor/stem cell delivery technique for tissue engineering and regenerative medicine applications. Biotechnol. Bioeng. 2010;106: 690–698. © 2010 Wiley Periodicals, Inc.     

Bio‐ORACLE: a global environmental dataset for marine species distribution modelling

Aim The oceans harbour a great diversity of organisms whose distribution and ecological preferences are often poorly understood. Species distribution modelling (SDM) could improve our knowledge and inform marine ecosystem management and conservation. Although marine environmental data are available from various sources, there are currently no user‐friendly, high‐resolution global datasets designed for SDM applications. This study aims to fill this gap by assembling a comprehensive, uniform, high‐resolution and readily usable package of global environmental rasters. Location Global, marine. Methods We compiled global coverage data, e.g. satellite‐based and in situ measured data, representing various aspects of the marine environment relevant for species distributions. Rasters were assembled at a resolution of 5 arcmin (c. 9.2 km) and a uniform landmask was applied. The utility of the dataset was evaluated by maximum entropy SDM of the invasive seaweed Codium fragile ssp. fragile. Results We present Bio‐ORACLE (ocean rasters for analysis of climate and environment), a global dataset consisting of 23 geophysical, biotic and climate rasters. This user‐friendly data package for marine species distribution modelling is available for download at http://www.bio‐oracle.ugent.be . The high predictive power of the distribution model of C. fragile ssp. fragile clearly illustrates the potential of the data package for SDM of shallow‐water marine organisms. Main conclusions The availability of this global environmental data package has the potential to stimulate marine SDM. The high predictive success of the presence‐only model of a notorious invasive seaweed shows that the information contained in Bio‐ORACLE can be informative about marine distributions and permits building highly accurate species distribution models.     

Approaches for Addressing Life Cycle Assessment Data Gaps for Bio‐based Products

There is an increasing need for life cycle data for bio‐based products, which becomes particularly evident with the recent drive for greenhouse gas reporting and carbon footprinting studies. Meeting this need is challenging given that many bio‐products have not yet been studied by life cycle assessment (LCA), and those that have are specific and limited to certain geographic regions. In an attempt to bridge data gaps for bio‐based products, LCA practitioners can use either proxy data sets (e.g., use existing environmental data for apples to represent pears) or extrapolated data (e.g., derive new data for pears by modifying data for apples considering pear‐specific production characteristics). This article explores the challenges and consequences of using these two approaches. Several case studies are used to illustrate the trade‐offs between uncertainty and the ease of application, with carbon footprinting as an example. As shown, the use of proxy data sets is the quickest and easiest solution for bridging data gaps but also has the highest uncertainty. In contrast, data extrapolation methods may require extensive expert knowledge and are thus harder to use but give more robust results in bridging data gaps. They can also provide a sound basis for understanding variability in bio‐based product data. If resources (time, budget, and expertise) are limited, the use of averaged proxy data may be an acceptable compromise for initial or screening assessments. Overall, the article highlights the need for further research on the development and validation of different approaches to bridging data gaps for bio‐based products.     

Bio‐economic analysis of the Mar Menor (Murcia,SE Spain) small‐scale lagoon fishery

An integrated fisheries management tool based on a bio‐economic model was applied to the demersal fishery in the Mar Menor coastal lagoon in SE Spain, with the objective of exploring solutions to ensure the sustainability of this activity. The hypothesis is that excess harvesting in recent years by fishers trying to offset growing production costs has led to the inefficient use of lagoon fishery resources. The authors established the basic bio‐economic conditions of the fishery in 2012 by means of field sampling and personal interviews with producers, and analyzed the response of several biological and economic indicators (target species biomass and yield, fleet profits) to a management scenario based on limiting the fishing season of one of the main types of fishing gear (fish traps, locally known as ‘paranzas’). Results show that a reduction in fishing mortality of two overexploited species (Sparus aurata and Lithognathus mormyrus) will help recover the biomass of these stocks by more than 40% as well as increase the economic value of the fishery, with profits increasing by 17% over a 4‐year period.     

Microfluidics and photonics for Bio‐System‐on‐a‐Chip: A review of advancements in technology towards a microfluidic flow cytometry chip

Microfluidics and photonics come together to form a field commonly referred to as ‘optofluidics’. Flow cytometry provides the field with a technology base from which both microfluidic and photonic components be developed and integrated into a useful device. This article reviews some of the more recent developments to familiarize a reader with the current state of the technologies and also highlights the requirements of the device and how researchers are working to meet these needs. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Bio‐analytical applications of microbial fuel cell–based biosensors for onsite water quality monitoring

Globally, sustainable provision of high‐quality safe water is a major challenge of the 21st century. Various chemical and biological monitoring analytics are presently utilized to guarantee the availability of high‐quality water. However, these techniques still face some challenges including high costs, complex design and onsite and online limitations. The recent technology of using microbial fuel cell (MFC)‐based biosensors holds outstanding potential for the rapid and real‐time monitoring of water source quality. MFCs have the advantages of simplicity in design and efficiency for onsite sensing. Even though some sensing applications of MFCs were previously studied, e.g. biochemical oxygen demand sensor, recently numerous research groups around the world have presented new practical applications of this technique, which combine multidisciplinary scientific knowledge in materials science, microbiology and electrochemistry fields. This review presents the most updated research on the utilization of MFCs as potential biosensors for monitoring water quality and considers the range of potentially toxic analytes that have so far been detected using this methodology. The advantages of MFCs over established technology are also considered as well as future work required to establish their routine use.     

Nature Driven Bio‐Piezoelectric/Triboelectric Nanogenerator as Next‐Generation Green Energy Harvester for Smart and Pollution Free Society

Electronics wastes (e‐wastes) are the major concern in the rapid expansion of smart/wearable/portable electronics in modern high‐tech society. Informal processing and enormous gathering of e‐wastes can lead to adverse human/animal health effects and environmental pollution worldwide. Currently, these issues are a big headache and require the scientific community to develop effective green energy harvesting technologies using biodegradable/biocompatible materials. Piezoelectric/triboelectric nanogenerators (PNGs/TNGs) are considered one of the most promising renewable green energy sources for the conversion of mechanical/biomechanical energies into electricity. However, organic/inorganic material based PNGs/TNGs are very much incompatible, and considered e‐wastes for their non‐biodegradability. This review covers potential uses of biodegradable/biocompatible materials which are wasted every day as nature driven material based bio‐nanogenerators with a particular focus on their applications in flexible PNGs/TNGs fabrication. Structural investigation and possible working principles are described first in order to outline the basic mechanism of bio‐inspired materials behind energy harvesting. Then, energy harvesting abilities and the mechanical sensing of bio‐inspired integrated flexible devices are discussed under various mechanical/biomechanical activities. Finally, their potential applications in various flexible, wearable, and portable electronic fields are demonstrated. These bio‐inspired energy harvesting devices can make huge changes in fields as diverse as portable electronics, in vitro/in vivo biomedical applications, and many more.