Metal‐Organic Framework‐Derived Non‐Precious Metal Nanocatalysts for Oxygen Reduction Reaction

By virtue of diverse structures and tunable properties, metal‐organic frameworks (MOFs) have presented extensive applications including gas capture, energy storage, and catalysis. Recently, synthesis of MOFs and their derived nanomaterials provide an opportunity to obtain competent oxygen reduction reaction (ORR) electrocatalysts due to their large surface area, controllable composition and pore structure. This review starts with the introduction of MOFs and current challenges of ORR, followed by the discussion of MOF‐based non‐precious metal nanocatalysts (metal‐free and metal/metal oxide‐based carbonaceous materials) and their application in ORR electrocatalysis. Current issues in MOF‐derived ORR catalysts and some corresponding strategies in terms of composition and morphology to enhance their electrocatalytic performance are highlighted. In the last section, a perspective for future development of MOFs and their derivatives as catalysts for ORR is discussed.     

Metal‐Organic Framework‐Derived Carbons for Battery Applications

The applications of carbon and carbon‐based materials with high porosity, high surface area, and functionalities based on metal‐organic framework precursors and/or templates have attracted significant research interest in recent years, particularly in the field of batteries. The chemical and physical properties of carbon and carbon‐based materials obtained by the heat treatment of various metal‐organic framework precursors or templates are improved to a certain extent. In this comprehensive review, the synthetic methods and electrochemical performance of carbon materials derived from metal‐organic frameworks (metal/carbon, metal oxide/carbon, nitrogen‐doped carbon, porous carbon, etc.) along with their applications in batteries are outlined.     

Advanced Electrode Materials Comprising of Structure‐Engineered Quantum Dots for High‐Performance Asymmetric Micro‐Supercapacitors

Micro‐supercapacitors (MSCs) as a new class of energy storage devices have attracted great attention due to their unique merits. However, the narrow operating voltage, slow frequency response, and relatively low energy density of MSCs are still insufficient. Therefore, an effective strategy to improve their electrochemical performance by innovating upon the design from various aspects remains a huge challenge. Here, surface and structural engineering by downsizing to quantum dot scale, doping heteroatoms, creating more structural defects, and introducing rich functional groups to two dimensional (2D) materials is employed to tailor their physicochemical properties. The resulting nitrogen‐doped graphene quantum dots (N‐GQDs) and molybdenum disulfide quantum dots (MoS₂‐QDs) show outstanding electrochemical performance as negative and positive electrode materials, respectively. Importantly, the obtained N‐GQDs//MoS₂‐QDs asymmetric MSCs device exhibits a large operating voltage up to 1.5 V (far exceeding that of most reported MSCs), an ultrafast frequency response (with a short time constant of 0.087 ms), a high energy density of 0.55 mWh cm^?3, and long‐term cycling stability. This work not only provides a novel concept for the design of MSCs with enhanced performance but also may have broad application in other energy storage and conversion devices based on QDs materials.     

Metal–Organic Framework Derived Honeycomb Co9S8@C Composites for High‐Performance Supercapacitors

Unique nanostructures always lead to extraordinary electrochemical energy storage performance. Here, the authors report a new strategy for using Metal‐organic frameworks (MOFs) derived cobalt sulfide in a carbon matrix with a 3D honeycombed porous structure, resulting in a high‐performance supercapacitor with unrivalled capacity of ≈1887 F g^‐1 at the current density of 1 A g^‐1. The honeycomb‐like structure of Co₉S₈@C composite is loosely adsorbed, with plentiful surface area and high conductivity, leading to improved Faradaic processes across the interface and enhanced redox reactions at active Co₉S₈ sites. Therefore, the heterostructure‐fabricated hybrid supercapacitor, using activated carbon as the counter electrode, demonstrates a high energy density of 58 Wh kg^‐1 at the power density of 1000 W kg^‐1. Even under an ultrahigh power density of 17 200 W kg^‐1, its energy density maintains ≈38 Wh kg^‐1. The hybrid supercapacitor also exhibits suitable cycling stability, with ≈90% capacity retention after 10 000 continuous cycles at the current density of 5 A g^‐1. This work presents a practical method for using MOFs as sacrificial templates to synthesize metal‐sulfides for highly efficient electrochemical energy storage.     

Recent Progress in Biomass‐Derived Electrode Materials for High Volumetric Performance Supercapacitors

Tremendous efforts have been spent on the development of electrical energy storage (EES) systems with high volumetric performance in the past few years due to the evergrowing demand of miniaturized, portable electronic devices, and electric vehicles. Among all the EES devices, supercapacitors with electrode materials derived from biosources have attracted special attention due to their eco‐friendliness, natural abundance, their intrinsic porous structures as well as their renewable and sustainable features. However, the relatively low packing densities make their specific volumetric capacitance intrinsically low, which has largely limited their further application in the supercapacitors. To address these issues, various promising approaches ranging from structural manufacture to compositional design are applied and significant breakthroughs are witnessed in recent years. In this progress report, key factors influencing the volumetric performance of biomass‐derived electrode materials are systematically discussed with a particular focus spanning from fundamental to operational aspects. This work provides insights into the development of high‐volumetric‐performance biomass‐derived supercapacitors by comprehensively summarizing recent advances in the rational structural design and fabrication. Perspectives regarding the future challenges and promising research directions on the design of next‐generation EES devices are also provided.     

Advanced Organic Electrode Materials for Rechargeable Sodium‐Ion Batteries

Benefiting from the high abundance and low cost of sodium resource, rechargeable sodium‐ion batteries (SIBs) are regarded as promising candidates for large‐scale electrochemical energy storage and conversion. Due to the heavier mass and larger radius of Na⁺ than that of Li⁺, SIBs with inorganic electrode materials are currently plagued with low capacity and insufficient cycling life. In comparison, organic electrode materials display the advantages of structure designability, high capacity and low limitation of cationic radius. However, organic electrode materials also encounter issues such as high‐solubility in electrolyte and low conductivity. Here, recently reported organic electrode materials, which mainly include the reactions based on either carbon‐oxygen double bond or carbon‐nitrogen double bond, and doping reactions, are systematically reviewed. Furthermore, the design strategies of organic electrodes are comprehensively summarized. The working voltage is regulated through controlling the lowest unoccupied molecular orbital energies. The theoretical capacity can be enhanced by increasing the active groups. The dissolution is inhibited with elevating the intermolecular forces with proper molecular weight. The conductivity can be improved with extending conjugated structures. Future research into organic electrodes should focus on the development of full SIBs with aqueous/aprotic electrolytes and long cycling stability.     

In Situ Formation of Co9S8 Quantum Dots in MOF‐Derived Ternary Metal Layered Double Hydroxide Nanoarrays for High‐Performance Hybrid Supercapacitors

Layered double hydroxides (LDHs) are promising cathode materials for supercapacitors because of the enhanced flow efficiency of ions in the interlayers. However, the limited active sites and monotonous metal species further hinder the improvement of the capacity performance. Herein, cobalt sulfide quantum dots (Co₉S₈‐QDs) are effectively created and embedded within the interlayer of metal‐organic‐frameworks‐derived ternary metal LDH nanosheets based on in situ selective vulcanization of Co on carbon fibers. The hybrid CF@NiCoZn‐LDH/Co₉S₈‐QD retains the lamellar structure of the ternary metal LDH very well, inheriting low transfer impedance of interlayer ions. Significantly, the selectively generated Co₉S₈‐QDs expose more abundant active sites, effectively improving the electrochemical properties, such as capacitive performance, electronic conductivity, and cycling stability. Due to the synergistic relationship, the hybrid material delivers an ultrahigh electrochemical capacity of 350.6 mAh g^?1 (2504 F g^?1) at 1 A g^?1. Furthermore, hybrid supercapacitors fabricated with CF@NiCoZn‐LDH/Co₉S₈‐QD and carbon nanosheets modified by single‐walled carbon nanotubes display an outstanding energy density of 56.4 Wh kg^?1 at a power density of 875 W kg^?1, with an excellent capacity retention of 95.3% after 8000 charge–discharge cycles. Therefore, constructing hybrid electrode materials by in situ‐created QDs in multimetallic LDHs is promising.     

Transition‐Metal (Fe,Co, Ni) Based Metal‐Organic Frameworks for Electrochemical Energy Storage

Transition‐metal (Fe, Co, Ni) based metal‐organic framework materials with controllable structures, large surface areas and adjustable pore sizes have attracted wide research interest for use in next‐generation electrochemical energy‐storage devices. This review introduces the synthesis of transition‐metal (Fe, Co, Ni) based metal‐organic frameworks and their derivatives with the focus on their application in supercapacitors and batteries.     

A Simple Electrochemical Route to Access Amorphous Mixed‐Metal Hydroxides for Supercapacitor Electrode Materials

Supercapacitors or electrochemical capacitors, as energy storage devices, require very stable positive electrode materials for useful applications. Although most positive electrodes are based on crystalline mixed‐metal hydroxides, their pseudocapacitors usually perform poorly or have a short cycle life. High activities can be achieved with amorphous phases. Methods to produce amorphous materials are also not typically amenable towards mixed‐metal compositions. It is demonstrated that electrochemistry in an ambient environment can be used to produce a series of amorphous mixed‐metal hydroxides with a homogeneous distribution of metals for use as positive electrode materials in a supercapacitor. The integrated performance of the amorphous ternary mixed‐metal hydroxide pseudocapacitor is superior to that of crystalline materials. The amorphous Ni‐Co‐Fe hydroxide supercapacitor is characterized by a long‐term cycling stability that retained 94% of its capacity after 20 000 cycles. This is much higher than the cycle life of crystalline devices. These results show the broad applicability of this methodology towards new electrode materials for high‐performance supercapacitors, especially amorphous mixed‐metal hydroxides, as advanced electrode materials.     

Carbonized Chicken Eggshell Membranes with 3D Architectures as High‐Performance Electrode Materials for Supercapacitors

Supercapacitor electrode materials are synthesized by carbonizing a common livestock biowaste in the form of chicken eggshell membranes. The carbonized eggshell membrane (CESM) is a three‐dimensional macroporous carbon film composed of interwoven connected carbon fibers containing around 10 wt% oxygen and 8 wt% nitrogen. Despite a relatively low surface area of 221 m² g^?1, exceptional specific capacitances of 297 F g^?1 and 284 F g^?1 are achieved in basic and acidic electrolytes, respectively, in a 3‐electrode system. Furthermore, the electrodes demonstrate excellent cycling stability: only 3% capacitance fading is observed after 10 000 cycles at a current density of 4 A g^?1. These very attractive electrochemical properties are discussed in the context of the unique structure and chemistry of the material.     

A Metal Organic Framework Derived Solid Electrolyte for Lithium–Sulfur Batteries

Lithium–sulfur batteries (LSBs) are currently considered as promising candidates for next‐generation energy storage technologies. However, their practical application is hindered by the critical issue of the polysulfide‐shuttle. Herein, a metal organic framework (MOF)‐derived solid electrolyte is presented to address it. The MOF solid electrolyte is developed based on a Universitetet i Oslo (UIO) structure. By grafting a lithium sulfonate (‐SO₃Li) group to the UIO ligand, both the ionic conductivity and the polysulfide‐suppression capability of the resulting ‐SO₃Li grafted UIO (UIOSLi) solid electrolyte are greatly improved. After integrating a Li‐based ionic liquid (Li‐IL), lithium bis(trifluoromethanesulfonyl)imide in 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, the resulting Li‐IL/UIOSLi solid electrolyte exhibits an ionic conductivity of 3.3 × 10^?4 S cm^?1 at room temperature. Based on its unique structure, the Li‐IL/UIOSLi solid electrolyte effectively restrains the polysulfide shuttle and suppresses lithium dendritic growth. Lithium–sulfur cells with the Li‐IL/UIOSLi solid electrolyte and a Li₂S₆ catholyte show stable cycling performance that preserves 84% of the initial capacity after 250 cycles with a capacity‐fade rate of 0.06% per cycle.     

Integration of FeOOH and Zeolitic Imidazolate Framework‐Derived Nanoporous Carbon as an Efficient Electrocatalyst for Water Oxidation

As a cost‐effective catalyst for the oxygen evolution reaction (OER), the potential use of FeOOH is hindered by its intrinsic poor electron conductivity. Here, the significant enhancement of OER activity and long‐term stability of electrodeposited FeOOH on zeolitic imidazolate framework‐derived N‐doped porous carbons (NPCs) are reported. In alkaline media, FeOOH/NPC supported on nickel foam as a 3D electrode delivers a current density of 100 mA cm^?2 at a small overpotential of 230 mV and exhibits a low Tafel slope of 33.8 mV dec^?1 as well as excellent durability, making it one of the most active OER catalysts. Such high performance is attributed to a combined effect of the excellent electron conductivity of NPC and the synergy between FeOOH and NiO derived from Ni substrate.     

Utilizing Latent Multi‐Redox Activity of p‐Type Organic Cathode Materials toward High Energy Density Lithium‐Organic Batteries

Organic electrode materials hold great potential due to their cost‐efficiency, eco‐friendliness, and possibly high theoretical capacity. Nevertheless, most organic cathode materials exhibit a trade‐off relationship between the specific capacity and the voltage, failing to deliver high energy density. Herein, it is shown that the trade‐off can be mitigated by utilizing the multi‐redox capability of p‐type electrodes, which can significantly increase the specific capacity within a high‐voltage region. The molecular structure of 5,10‐dihydro‐5,10‐dimethylphenazine is modified to yield a series of phenoxazine and phenothiazine derivatives with elevated redox potentials by substitutions. Subsequently, the feasibility of the multi‐redox capability is scrutinized for these high‐voltage p‐type organic cathodes, achieving one of the highest energy densities. It is revealed that the seemingly impractical second redox reaction is indeed dependent on the choice of the electrolyte and can be reversibly realized by tailoring the donor number and the salt concentration of the electrolyte, which places the voltage of the multi‐redox reaction within the electrochemical stability window. The results demonstrate that high‐energy‐density organic cathodes can be practically achieved by rational design of multi‐redox p‐type organic electrode materials and the compatibility consideration of the electrolyte, opening up a new avenue toward advanced organic rechargeable batteries.     

Programmable Nanocarbon‐Based Architectures for Flexible Supercapacitors

Supercapacitors (SCs), also called electrochemical capacitors, often show high power density, excellent charge/discharge rates, and long cycle life. The recent development of flexible and wearable electronic devices requires that their power sources be sufficiently compact and flexible to match these electronic components. Therefore, flexible SCs have attracted much attention to power current advanced electronics that can be flexible and wearable. In the past several years, many different strategies have been developed to programmably construct different nanocarbon materials into bendable electrode architectures. Furthermore, flexible SC devices with simplified configurations have also been designed based on these nanocarbon‐based architectures. Here, recent developments in the programmable assembly of bendable architectures based on nanocarbon materials are presented. Additionally, the design of flexible nanocarbon‐based SC devices with various configurations is highlighted. The progress made recently paves the way for further development of nanocarbon architectures and corresponding flexible SC devices. Future development and prospects in this area are also analyzed.     

Metal‐Organic Frameworks for Carbon Dioxide Capture and Methane Storage

In the global transition to a sustainable low‐carbon economy, CO₂ capture and storage technology still plays a critical role for deep emission reduction, particularly for the stationary sources in power generation and industry. However, for small and mobile emission sources in transportation, CO₂ capture is not suitable and it is more practical to use relatively clean energy, such as natural gas. In these two low‐carbon energy technologies, designing highly selective sorbents is one of the key and most challenging steps. Toward this end, metal‐organic frameworks (MOFs) have received continuously intensive attention in the past decades for their highly porous and diversified structures. In this review, the recent progress in developing MOFs for selective CO₂ capture from post‐combustion flue gas and CH₄ storage for vehicle applications are summarized. For CO₂ capture, several promising strategies being used to improve CO₂ adsorption uptake at low pressures are highlighted and compared. In addition, the conventional and novel regeneration techniques for MOFs are also discussed. In the case of CH₄ storage, the flexible and rigid MOFs, whose CH₄ storage capacity is close to the target set by U.S. Department of Energy are particularly emphasized. Finally, the challenge of using MOFs for CH₄ storage is discussed.     

2D Metal Organic Framework Nanosheet: A Universal Platform Promoting Highly Efficient Visible‐Light‐Induced Hydrogen Production

2D metal organic frameworks (MOF) have received tremendous attention due to their organic–inorganic hybrid nature, large surface area, highly exposed active sites, and ultrathin thickness. However, the application of 2D MOF in light‐to‐hydrogen (H₂) conversion is rarely reported. Here, a novel 2D MOF [Ni(phen)(oba)]_n·0.5nH₂O (phen = 1,10‐phenanthroline, oba = 4,4′‐oxybis(benzoate)) is for the first time employed as a general, high‐performance, and earth‐abundant platform to support CdS or Zn_0.8Cd_0.2S for achieving tremendously improved visible‐light‐induced H₂‐production activity. Particularly, the CdS‐loaded 2D MOF exhibits an excellent H₂‐production activity of 45 201 µmol h^?1 g^?1, even exceeding that of Pt‐loaded CdS by 185%. Advanced characterizations, e.g., synchrotron‐based X‐ray absorption near edge structure, and theoretical calculations disclose that the interactive nature between 2D MOF and CdS, combined with the high surface area, abundant reactive centers, and favorable band structure of 2D MOFs, synergistically contribute to this distinguished photocatalytic performance. The work not only demonstrates that the earth‐abundant 2D MOF can serve as a versatile and effective platform supporting metal sulfides to boost their photocatalytic H₂‐production performance without noble‐metal co‐catalysts, but also paves avenues to the design and synthesis of 2D‐MOF‐based heterostructures for catalysis and electronics applications.     

High‐Performance and Breathable Polypyrrole Coated Air‐Laid Paper for Flexible All‐Solid‐State Supercapacitors

High‐performance, breathable, conductive, and flexible polypyrrole (PPy) coated paper electrodes are prepared by an interfacial polymerization method using air‐laid paper as a substrate. Owing to the synergistic effect of superior electrical conductivity, high wettability, and the porous architecture, the prepared electrode not only shows an outstanding specific capacitance and rate abilities (3100 and 2579 mF cm^?2 at 1 and 20 mA cm^?2 for a PPy coated paper electrode), but also exhibits excellent flexibility, wearability, and breathability. Based on these superior features, an all‐solid‐state supercapacitor assembled with the PPy coated paper electrodes shows an outstanding energy density of 62.4 µW h cm^?2, remarkable air permeability and excellent flexibility to sustain various deformations. Furthermore, large‐scale fabrication of conductive flexible paper electrode can be easily achieved through this method. Therefore, this work offers a new vision for flexible energy storage.     

All‐Organic Battery Composed of Thianthrene‐ and TCAQ‐Based Polymers

An all‐organic battery consisting of two redox‐polymers, namely poly(2‐vinylthianthrene) and poly(2‐methacrylamide‐TCAQ) is assembled. This all‐organic battery shows excellent performance characteristics, namely flat discharge plateaus, an output voltage exceeding 1.3 V, and theoretical capacities of both electrodes higher than 100 mA h g^?1. Both organic electrode materials are synthesized in two respective three synthetic steps using the free‐radical polymerization technique. Li‐organic batteries manufactured from these polymers prove their suitability as organic electrode materials. The cathode material poly(2‐vinylthianthrene) (3) displays a discharging plateau at 3.95 V versus Li⁺/Li and a discharge capacity of 105 mA h g^?1, corresponding to a specific energy of about 415 mW h g^?1. The anode material poly(2‐methacrylamide‐TCAQ) (7) exhibits an initial discharge capacity of 130 mA h g^?1, corresponding to 94% material activity. The combination of both materials results in an all‐organic battery with a discharge voltage of 1.35 V and an initial discharge capacity of 105 mA h g^?1 (95% material activity).