Benchmarking the Activity,Stability, and Inherent Electrochemistry of Amorphous Molybdenum Sulfide for Hydrogen Production

Anodically electrodeposited amorphous molybdenum sulfide (AE‐MoS_x) has attracted significant attention as a non‐noble metal electrocatalyst for its high activity toward the hydrogen evolution reaction (HER). The [Mo₃S₁₃]^2? polymer‐based structure confers a high density of exposed sulfur moieties, widely regarded as the HER active sites. However, their intrinsic complexity conceals full understanding of their exact role in HER catalysis, hampering their full potential for water splitting applications. In this report, a unifying approach is adopted accounting for modifications in the inherent electrochemistry (EC), HER mechanism, and surface species to maximize the AE‐MoS_x electroactivity over a broad pH region (0–10). Dramatic enhancements in HER performance by selective electrochemical cycling within reductive (overpotential shift, η_HER ≈ ?350 mV) and electro‐oxidative windows (η_HER ≈ ?290 mV) are accompanied by highly stable performance in mildly acidic electrolytes. Joint analysis of X‐ray photoelectron spectroscopy, Raman, and EC experiments corroborate the key role of bridging and terminal S ligands as active site generators at low pH, and reveal molybdenum oxysulfides (Mo⁵⁺O_xS_y) to be the most active HER moiety in AE‐MoS_x in mildly acidic‐to‐neutral environments. These findings will be extremely beneficial for future tailoring of MoS_x materials and their implementation in commercial electrolyzer technologies.     

Anion–Cation Double Substitution in Transition Metal Dichalcogenide to Accelerate Water Dissociation Kinetic for Electrocatalysis

Until now, many works have shown that the hydrogen evolution reaction (HER) performance can be improved by anion or cation substitution into the crystal lattice of pyrite‐structure materials. However, the synergistic effects of anion–cation double substitution for overall enhancement of the catalytic activity remains questionable. Here, the simultaneous incorporation of vanadium and phosphorus into the CoS₂ moiety for preparing 3D mesoporous cubic pyrite‐metal Co_1‐xV_xSP is presented. It is demonstrated that the higher catalytic activity of CoS₂ after V incorporation can be primarily attributed to abundance active sites, whereas P substitution is responsible for improving HER kinetics and intrinsic catalyst. Interestingly, due to the synergistic effect of P–V double substitution, the 3D Co_1‐xV_xSP shows superior electrocatalysis toward the HER with a very small overpotential of 55 mV at 10 mA cm^?2, a small Tafel slope of 50 mV dec^?1, and a high turnover frequency of 0.45 H₂ s^?1 at 10 mA cm^?2, which is very close to commercial 20% Pt/C. Density functional theory calculation reveals that the superior catalytic activity of the 3D Co_1‐xV_xSP is contributed by the reduced kinetic energy barrier of rate‐determining HER step as well as the promotion of the desorption H₂ gas process.     

Mo‐Based Ultrasmall Nanoparticles on Hierarchical Carbon Nanosheets for Superior Lithium Ion Storage and Hydrogen Generation Catalysis

Constructing 3D hierarchical architecture consisting of 2D hybrid nanosheets is very critical to achieve uppermost and stable electrochemical performance for both lithium‐ion batteries (LIBs) and hydrogen evolution reaction (HER). Herein, a simple synthesis of uniform 3D microspheres assembled from carbon nanosheets with the incorporated MoO₂ nanoclusters is demonstrated. The MoO₂ nanoclusters can be readily converted into the molybdenum carbide (Mo₂C) nanocrystals by using high temperature treatment. Such assembling architecture is highly particular for preventing Mo‐based ultrasmall nanoparticles from coalescing or oxidizing and endowing them with rapid electron transfer. Consequently, the MoO₂/C hybrids as LIB anode materials deliver a specific capacity of 625 mA h g^?1 at 1600 mA g^?1 even after 1000 cycles, which is among the best reported values for MoO₂‐based electrode materials. Moreover, the Mo₂C/C hybrids also exhibit excellent electrocatalytic activity for HER with small overpotential and robust durability in both acid and alkaline media. The present work highlights the importance of designing 3D structure and controlling ultrasmall Mo‐based nanoparticles for enhancing electrochemical energy conversion and storage applications.     

Over 100‐nm‐Thick MoOx Films with Superior Hole Collection and Transport Properties for Organic Solar Cells

Herein, a novel and effective method to prepare n‐doped MoO_x films with highly improved conductivity is reported. The MoO_x films are readily prepared by spin‐coating an aqueous solution containing ammonium molybdate tetrahydrate and vitamin C (VC). As confirmed by UV–vis absorption, X‐ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy measurements, Mo(VI) is partially reduced to Mo(V) by VC, resulting in the n‐doping of MoO_x. The conductivity of the n‐doped MoO_x (H:V‐Mo) film can be enhanced by four orders of magnitude compared to pristine MoO_x (H‐Mo), that is, from 1.2 × 10⁻⁷ to 1.1 × 10⁻³ S m⁻¹. The device using a 10 nm H:V‐Mo anode interlayer (AIL) exhibits comparable photovoltaic performance to a poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)‐modified device. More importantly, the hole transport and collection properties of the H:V‐Mo AILs show outstanding tolerance to thickness variation, that is, with increasing thickness of the H:V‐Mo AIL from 10 to 150 nm, the V _oc and fill factor values of the devices remain unchanged. The device based on the blade‐coated H:V‐Mo AIL also has a high power conversion efficiency of 10.6%. To the best of the authors' knowledge, this work demonstrates the first example to prepare metal oxide AILs with outstanding tolerance to thickness, which is promising for the future large‐area manufacturing.     

Eliminating Transition Metal Migration and Anionic Redox to Understand Voltage Hysteresis of Lithium‐Rich Layered Oxides

Lithium‐rich layered oxides are promising candidate cathode materials for the Li‐ion batteries with energy densities above 300 Wh kg^?1. However, issues such as the voltage hysteresis and decay hinder their commercial applications. Due to the entanglement of the transition metal (TM) migration and the anionic redox upon lithium extraction at high potentials, it is difficult to recognize the origin of these issues in conventional Li‐rich layered oxides. Herein, Li₂MoO₃ is chosen since prototype material to uncover the reason for the voltage hysteresis as the TM migration and anionic redox can be eliminated below 3.6 V versus Li⁺/Li in this material. On the basis of comprehensive investigations by neutron powder diffraction, scanning transmission electron microscopy, synchrotron X‐ray absorption spectroscopy, and density functional theory calculations, it is clarified that the ordering–disordering transformation of the Mo₃O₁₃ clusters induced by the intralayer Mo migration is responsible for the voltage hysteresis in the first cycle; the hysteresis can take place even without the anionic redox or the interlayer Mo migration. A similar suggestion is drawn for its iso‐structured Li₂RuO₃ (C2/c). These findings are useful for understanding of the voltage hysteresis in other complicated Li‐rich layered oxides.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.     

One‐Step Controllable Synthesis of Catalytic Ni4Mo/MoOx/Cu Nanointerfaces for Highly Efficient Water Reduction

Currently, in addition to the electroactive non‐noble metal water‐splitting electrocatalysts, a scalable synthetic route and simple activity enhancement strategy is also urgently needed. In particular, the well‐controlled synthesis of the well‐recognized metal–metal nanointer face in a single step remains a key challenge. Here, the synthesis of Cu‐supported Ni₄Mo nanodots on MoO_x nanosheets (Ni₄Mo/MoO_x) with controllable Ni₄Mo particle size and d‐band structure is reported via a facile one‐step electrodeposition process. Density functional theory (DFT) calculations reveal that the active open‐shell effect from Ni‐3d‐band optimizes the electronic configuration. The Cu‐substrate enables the surface Ni–Mo alloy dots to be more electron‐rich, forming a local connected electron‐rich network, which boosts the charge transfer for effective binding of O‐related species and proton–electron charge exchange in the hydrogen evolution reaction. The Cu‐supported Ni₄Mo/MoO_x shows an ultralow overpotential of 16 mV at a current density of 10 mA cm^?2 in 1 m KOH, demonstrating the smallest overpotential, at loadings as low as 0.27 mg cm^?2, among all non‐noble metal catalysts reported to date. Moreover, an overpotential of 105 mV allows it to achieve a current density of 250 mA cm^?2 in 70 °C 30% KOH, a remarkable performance for alkaline hydrogen evolution with competitive potential for applications.     

Self‐Limited on‐Site Conversion of MoO3 Nanodots into Vertically Aligned Ultrasmall Monolayer MoS2 for Efficient Hydrogen Evolution

MoS₂ has emerged as a promising alternative electrocatalyst for the hydrogen evolution reaction (HER) due to high intrinsic per‐site activity on its edge sites and S‐vacancies. However, a significant challenge is the limited density of such sites. Reducing the size and layer number of MoS₂ and vertically aligning them would be an effective way to enrich and expose such sites for HER. Herein, a facile self‐limited on‐site conversion strategy for synthesizing monolayer MoS₂ in a couple of nanometers which are highly dispersed and vertically aligned on 3D porous carbon sheets is reported. It is discovered that the preformation of well‐dispersed MoO₃ nanodots in 1–2 nm as limited source is the key for the fabrication of such an ultrasmall MoS₂ monolayer. As indicated by X‐ray photoelectron spectroscopy and electron spin resonance data, these ultrasmall MoS₂ monolayers are rich in accessible S‐edge sites and vacancies and the smaller MoS₂ monolayers the more such sites they have, leading to enhanced electrocatalytic activity with a low overpotential of 126 mV at 10 mA cm^?2 and 140 mV at 100 mA mg^?1 for HER. This state‐of‐the‐art performance for MoS₂ electrocatalysts enables the present strategy as a new avenue for exploring well‐dispersed ultrasmall nanomaterials as efficient catalysts.     

A new Pr3+‐activated molybdate‐based phosphor for application to white LEDs with blue excitation

The novel red‐emitting phosphors K_xSr_1?2xMoO₄:Pr³⁺_x (0.00 ≤ x ≤ 0.04) were prepared by solid‐state reaction. The crystallization and particle sizes of samples were investigated by powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). TEM images were in good agreement with the theoretical calculation data from the XRD patterns. Photoluminescence analysis indicated that there were three excitation peaks under 430–500 nm, and all samples showed the intensely red emission at 648 nm corresponding to the ³P₀ → ³F₂ transition of Pr³⁺. The concentrations of doping ions, temperature and polyethylene glycol in the phosphor system can significantly influence the intensity of the red emission. The photoluminescence spectral intensity reached its maximum at x = 0.02. The results showed that the investigated phosphor is a potential red phosphor for white light‐emitting diodes. Copyright © 2010 John Wiley & Sons, Ltd.     

Insights into the Enhanced Cycle and Rate Performances of the F‐Substituted P2‐Type Oxide Cathodes for Sodium‐Ion Batteries

A series of F‐substituted Na_2/3Ni_1/3Mn_2/3O_2?xF_x (x = 0, 0.03, 0.05, 0.07) cathode materials have been synthesized and characterized by solid‐state ¹⁹F and ²³Na NMR, X‐ray photoelectron spectroscopy, and neutron diffraction. The underlying charge compensation mechanism is systematically unraveled by X‐ray absorption spectroscopy and electron energy loss spectroscopy (EELS) techniques, revealing partial reduction from Mn⁴⁺ to Mn³⁺ upon F‐substitution. It is revealed that not only Ni but also Mn participates in the redox reaction process, which is confirmed for the first time by EELS techniques, contributing to an increase in discharge specific capacity. The detailed structural transformations are also revealed by operando X‐ray diffraction experiments during the intercalation and deintercalation process of Na⁺, demonstrating that the biphasic reaction is obviously suppressed in the low voltage region via F‐substitution. Hence, the optimized sample with 0.05 mol f.u.^?1 fluorine substitution delivers an ultrahigh specific capacity of 61 mAh g^?1 at 10 C after 2000 cycles at 30 °C, an extraordinary cycling stability with a capacity retention of 75.6% after 2000 cycles at 10 C and 55 °C, an outstanding full battery performance with 89.5% capacity retention after 300 cycles at 1 C. This research provides a crucial understanding of the influence of F‐substitution on the crystal structure of the P2‐type materials and opens a new avenue for sodium‐ion batteries.     

Luminescent properties of sol–gel processed red‐emitting phosphor Ca0.6Sr0.4–1.5x‐0.5yMo0.4 W0.6O4:EuxLiy

A series of red‐emitting phosphors Ca_0.6Sr_{0.4–1.5x‐0.5y}Mo_0.4 W_0.6O₄:Eu_xLi_y (x = 0.02–0.12, y = 0–0.12) has been synthesized by a sol‐gel method. The effects of calcining temperature, concentrations of Li⁺ and Eu³⁺, and compensation ions on the luminescent properties were investigated. X‐ray diffraction and scanning electron microscopic results showed that as‐prepared phosphors were of single phase with several microns. The Li⁺ compensated compositions showed remarkably intense red emission at 619 nm. The emission intensity of the series reached maximum for compositions at x = 0.08 and y = 0.08 when the calcining temperature was 900 °C. Copyright © 2014 John Wiley & Sons, Ltd.     

Identifying Catalytic Active Sites of Trimolybdenum Phosphide (Mo3P) for Electrochemical Hydrogen Evolution

Solid‐state electrocatalysis plays a crucial role in the development of renewable energy to reshape current and future energy needs. However, finding an inexpensive and highly active catalyst to replace precious metals remains a big challenge for this technology. Here, tri‐molybdenum phosphide (Mo₃P) is found as a promising nonprecious metal and earth‐abundant candidate with outstanding catalytic properties that can be used for electrocatalytic processes. The catalytic performance of Mo₃P nanoparticles is tested in the hydrogen evolution reaction (HER). The results indicate an onset potential of as low as 21 mV, H₂ formation rate, and exchange current density of 214.7 µmol s^?1 g^?1_cat (at only 100 mV overpotential) and 279.07 µA cm^?2, respectively, which are among the closest values yet observed to platinum. Combined atomic‐scale characterizations and computational studies confirm that high density of molybdenum (Mo) active sites at the surface with superior intrinsic electronic properties are mainly responsible for the remarkable HER performance. The density functional theory calculation results also confirm that the exceptional performance of Mo₃P is due to neutral Gibbs free energy (ΔG_H*) of the hydrogen (H) adsorption at above 1/2 monolayer (ML) coverage of the (110) surface, exceeding the performance of existing non‐noble metal catalysts for HER.     

Ammonolyzed MoO3 Nanobelts as Novel Cathode Material of Rechargeable Li‐Ion Batteries

Through a moderate ammonolysis method, nanobelts of α‐MoO₃ can be modified to H_xMo(O, N)_3. When reaction temperatures are kept between 200–300 °C, gaseous NH₃ diffuses in‐between the oxide layers and reacts with terminal oxygen sites of MoO₃. As a consequence, hydrogen is introduced into the layers and bonded to terminal oxygen, and together with the effect of nitradation, the unit cell volume significantly shrinks mostly along the b axis. The modified compound H_xMo(O, N)₃ exhibits not only better electronic conductivity, but also faster lithium ion mobility than regular MoO₃. In addition, this ammonolyzed MoO₃ exhibits enhanced electrochemical performance beyond MoO₃. In the potential window 1.5–3.5 V, the specific capacity of H_xMo(O, N)₃ can reach more than 250 A h kg^?1 and was cycled 300 times without fading. It can be considered as a novel candidate cathode material with high specific charge for rechargeable Li‐ion batteries.     

Silica Restricting the Sulfur Volatilization of Nickel Sulfide for High‐Performance Lithium‐Ion Batteries

Nickel sulfides are regarded as promising anode materials for advanced rechargeable lithium‐ion batteries due to their high theoretical capacity. However, capacity fade arising from significant volume changes during operation greatly limits their practical applications. Herein, confined NiS_x@C yolk–shell microboxes are constructed to address volume changes and confine the active material in the internal void space. Having benefited from the yolk–shell structure design, the prepared NiS_x@C yolk–shell microboxes display excellent electrochemical performance in lithium‐ion batteries. Particularly, it delivers impressive cycle stability (460 mAh g^?1 after 2000 cycles at 1 A g^?1) and superior rate performance (225 mAh g^?1 at 20 A g^?1). Furthermore, the lithium storage mechanism is ascertained with in situ synchrotron high‐energy X‐ray diffractions and in situ electrochemical impedance spectra. This unique confined yolk–shell structure may open up new strategies to create other advanced electrode materials for high performance electrochemical storage systems.     

Ligand‐Assisted Assembly Approach to Synthesize Large‐Pore Ordered Mesoporous Titania with Thermally Stable and Crystalline Framework

A novel ligand‐assisted assembly approach is demonstrated for the synthesis of thermally stable and large‐pore ordered mesoporous titanium dioxide with a highly crystalline framework by using diblock copolymer poly(ethylene oxide)‐b‐polystyrene (PEO‐b‐PS) as a template and titanium isopropoxide (TIPO) as a precursor. Small‐angle X‐ray scattering, X‐ray diffraction (XRD), transmission electron microscopy (TEM), high‐resolution scanning electron microscopy, and N₂‐sorption measurements indicate that the obtained TiO₂ materials possess an ordered primary cubic mesostructure with large, uniform pore diameters of about 16.0 nm, and high Brunauer–Emmett–Teller surface areas of ～112 m² g^?1, as well as high thermal stability (～700 °C). High resolution TEM and wide‐angle XRD measurements clearly illustrate the high crystallinity of the mesoporous titania with an anatase structure in the pore walls. It is worth mentioning that, in this process, in addition to tetrahydrofuran as a solvent, acetylacetone was employed as a coordination agent to avoid rapid hydrolysis of the titanium precursor. Additionally, stepped evaporation and heating processes were adopted to control the condensation rate and facilitate the assembly of the ordered mesostructure, and ensure the formation of fully polycrystalline anatase titania frameworks without collapse of the mesostructure. By employing the obtained mesoporous and crystallized TiO₂ as the photoanode in a dye‐sensitized solar cell, a high power‐conversion efficiency (5.45%) can be achieved in combination with the N719 dye, which shows that this mesoprous titania is a great potential candidate as a catalyst support for photonic‐conversion applications.     

Crystalline Ni(OH)2/Amorphous NiMoOx Mixed‐Catalyst with Pt‐Like Performance for Hydrogen Production

The achievement of effective alkaline hydrogen production from water electrolysis is an active field of research. Herein, an integrated electrode composed of crystalline Ni(OH)₂ and amorphous NiMoO_x is fabricated onto nickel foam (denoted as Ni(OH)₂–NiMoO_x/NF). The hydrogen evolution reaction (HER) kinetics are optimized along with phase transformation process during soaking operation. An overpotential of 36 mV to drive 10 mA cm^?2 along with the low Tafel slope of 38 mV dec^?1 reveals the catalyst's excellent HER performance and a Heyrovsky‐step‐controlled HER mechanism. When assembled into a urea‐assisted water electrolyzer, a voltage of 1.42 V can reach 10 mA cm^?2. Further experiments and Fourier transform infrared spectroscopy (FTIR) results illustrate the synergy effect between crystalline and amorphous areas and the optimized water dissociation step. Crystalline Ni(OH)₂ serves as the scissor for water dissociation in an alkali environment to produce H*, while the amorphous NiMoO_x layer serves as the location for H* adsorption and H₂ desorption.     

Na‐Ion Intercalation and Charge Storage Mechanism in 2D Vanadium Carbide

2D vanadium carbide MXene containing surface functional groups (denoted as V₂CT_x , where T_x are surface functional groups) is synthesized and studied as anode material for Na‐ion batteries. V₂CT_x anode exhibits reversible charge storage with good cycling stability and high rate capability through electrochemical test. The charge storage mechanism of V₂CT_x material during Na⁺ intercalation/deintercalation and the redox reaction of vanadium are studied using a combination of synchrotron based X‐ray diffraction, hard X‐ray absorption near edge spectroscopy (XANES), and soft X‐ray absorption spectroscopy (sXAS). Experimental evidence of a major contribution of redox reaction of vanadium to the charge storage and the reversible capacity of V₂CT_x during sodiation/desodiation process are provided through V K ‐edge XANES and V L _2,3‐edge sXAS results. A correlation between the CO₃^2? content and the Na⁺ intercalation/deintercalation states in the V₂CT_x electrode observed from C and O K ‐edge in sXAS results implies that some additional charge storage reactions may take place between the Na⁺‐intercalated V₂CT_x and the carbonate‐based nonaqueous electrolyte. The results of this study provide valuable information for the further studies on V₂CT_x as anode material for Na‐ion batteries and capacitors.     

Influence of rare earth elements (Y,Gd and Lu) on the luminescent properties of green phosphor ZnMoO4:Tb3+

(Zn,Ln_x)MoO₄:Tb³⁺ (Ln = Y³⁺, Gd³⁺ and Lu³⁺) were prepared using the co‐precipitation method. Phase impurity, morphology and composition were investigated by power X‐ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The experimental results show that crystal structure is not destroyed after doping an appropriate amount of Y³⁺, Gd³⁺ and Lu³⁺. EDS analysis reveals that Y, Gd and Lu have been successfully doped into ZnMoO₄. In addition, the morphology of the phosphors is notably improved, exhibiting homogeneous dispersion morphology and irregular shapes of particle size ~ 0.5–1 µm. The luminescent intensity of (Zn,Ln_x)MoO₄:Tb³⁺ (Ln = Y³⁺, Gd³⁺ and Lu³⁺) phosphor is obviously higher than that of ZnMoO₄:Tb³⁺ phosphor. The energy transfer process between trivalent rare earth ions indicates that the inert earth ions can act as an energy bridge from MoO₄^2‐ to Tb³⁺. Copyright © 2013 John Wiley & Sons, Ltd.     

A High‐Energy NASICON‐Type Cathode Material for Na‐Ion Batteries

Over the last decade, Na‐ion batteries have been extensively studied as low‐cost alternatives to Li‐ion batteries for large‐scale grid storage applications; however, the development of high‐energy positive electrodes remains a major challenge. Materials with a polyanionic framework, such as Na superionic conductor (NASICON)‐structured cathodes with formula Na_xM₂(PO₄)₃, have attracted considerable attention because of their stable 3D crystal structure and high operating potential. Herein, a novel NASICON‐type compound, Na₄MnCr(PO₄)₃, is reported as a promising cathode material for Na‐ion batteries that deliver a high specific capacity of 130 mAh g^?1 during discharge utilizing high‐voltage Mn^2+/3+ (3.5 V), Mn^3+/4+ (4.0 V), and Cr^3+/4+ (4.35 V) transition metal redox. In addition, Na₄MnCr(PO₄)₃ exhibits a high rate capability (97 mAh g^?1 at 5 C) and excellent all‐temperature performance. In situ X‐ray diffraction and synchrotron X‐ray diffraction analyses reveal reversible structural evolution for both charge and discharge.     

Facile Metal Coordination of Active Site Imprinted Nitrogen Doped Carbons for the Conservative Preparation of Non‐Noble Metal Oxygen Reduction Electrocatalysts

Iron‐ or cobalt‐coordinated heteroatom doped carbons are promising alternatives for Pt‐based cathode catalysts in polymer‐electrolyte fuel cells. Currently, these catalysts are obtained at high temperatures. The reaction conditions complicate the selective and concentrated formation of metal–nitrogen active sites. Herein a mild procedure is introduced, which is conservative toward the carbon support and leads to active‐site formation at low temperatures in a wet‐chemical metal‐coordination step. Active‐site imprinted nitrogen doped carbons are synthesized via ionothermal carbonization employing Lewis‐acidic Mg²⁺ salt. The obtained carbons with large tubular porosity and imprinted N₄ sites lead to very active catalysts with a half‐wave potential (E_1/2) of up to 0.76 V versus RHE in acidic electrolyte after coordination with iron. The catalyst shows 4e^? selectivity and exceptional stability with a half‐wave potential shift of only 5 mV after 1000 cycles. The X‐ray absorption fine structure as well as the X‐ray absorption near edge structure profiles of the most active catalyst closely match that of iron(II)phthalocyanine, proving the formation of active and stable FeN₄ sites at 80 °C. Metal‐coordination with other transition metals reveals that Zn–N_x sites are inactive, while cobalt gives rise to a strong performance increase even at very low concentrations.