Single Atoms and Clusters Based Nanomaterials for Hydrogen Evolution,Oxygen Evolution Reactions,and Full Water Splitting

The sustainable and scalable production of hydrogen through hydrogen evolution reaction (HER) and oxygen through oxygen evolution reaction (OER) in water splitting demands efficient and robust electrocatalysts. Currently, state‐of‐the‐art electrocatalysts of Pt and IrO₂/RuO₂ exhibit the benchmark catalytic activity toward HER and OER, respectively. However, expanding their practical application is hindered by their exorbitant price and scarcity. Therefore, the development of alternative effective electrocatalysts for water splitting is crucial. In the last few decades, substantial effort has been devoted to the development of alternative HER/OER and water splitting catalysts based on various transition metals (including Fe, Co, Ni, Mo, and atomic Pt) which show promising catalytic activities and durability. In this review, after a brief introduction and basic mechanism of HER/OER, the authors systematically discuss the recent progress in design, synthesis, and application of single atom and cluster‐based HER/OER and water splitting catalysts. Moreover, the crucial factors that can tune the activity of catalysts toward HER/OER and water splitting such as morphology, crystal defects, hybridization of metals with nonmetals, heteroatom doping, alloying, and formation of metals inside graphitic layered materials are discussed. Finally, the existing challenges and future perspectives for improving the performance of electrocatalysts for water splitting are addressed.     

Ultralow Ru Loading Transition Metal Phosphides as High‐Efficient Bifunctional Electrocatalyst for a Solar‐to‐Hydrogen Generation System

Water splitting is a promising technology for sustainable conversion of hydrogen energy. The rational design of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) bifunctional electrocatalysts with superior activity and stability in the same electrolyte is the key to promoting their large‐scale applications. Herein, an ultralow Ru (1.08 wt%) transition metal phosphide on nickel foam (Ru–MnFeP/NF) derived from Prussian blue analogue, that effectively drivies both the OER and the HER in 1 m KOH, is reported. To reach 20 mA cm^?2 for OER and 10 mA cm^?2 for HER, the Ru–MnFeP/NF electrode only requires overpotentials of 191 and 35 mV, respectively. Such high electrocatalytic activity exceeds most transition metal phosphides for the OER and the HER, and even reaches Pt‐like HER electrocatalytic levels. Accordingly, it significantly accelerates full water splitting at 10 mA cm^?2 with 1.470 V, which outperforms that of the integrated RuO₂ and Pt/C couple electrode (1.560 V). In addition, the extremely long operational stability (50 h) and the successful demonstration of a solar‐to‐hydrogen generation system through full water splitting provide more flexibility for large‐scale applications of Ru–MnFeP/NF catalysts.     

Ni Strongly Coupled with Mo2C Encapsulated in Nitrogen‐Doped Carbon Nanofibers as Robust Bifunctional Catalyst for Overall Water Splitting

It is urgently required to develop highly efficient and stable bifunctional non‐noble metal electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for water splitting. In this study, a facile electrospinning followed by a post‐carbonization treatment to synthesize nitrogen‐doped carbon nanofibers (NCNFs) integrated with Ni and Mo₂C nanoparticles (Ni/Mo₂C‐NCNFs) as water splitting electrocatalysts is developed. Owing to the strong hydrogen binding energy on Mo₂C and high electrical conductivity of Ni, synergetic effect between Ni and Mo₂C nanoparticles significantly promote both HER and OER activities. The optimized hybrid (Ni/Mo₂C(1:2)‐NCNFs) delivers low overpotentials of 143 mV for HER and 288 mV for OER at a current density of 10 mA cm^?2. An alkaline electrolyzer with Ni/Mo₂C(1:2)‐NCNFs as catalysts for both anode and cathode exhibits a current density of 10 mA cm^?2 at a voltage of 1.64 V, which is only 0.07 V larger than the benchmark of Pt/C‐RuO₂ electrodes. In addition, an outstanding long‐term durability during 100 h testing without obvious degradation is achieved, which is superior to most of the noble‐metal‐free electrocatalysts reported to date. This work provides a simple and effective approach for the preparation of low‐cost and high‐performance bifunctional electrocatalysts for efficient overall water splitting.     

A Perovskite Nanorod as Bifunctional Electrocatalyst for Overall Water Splitting

The development of highly efficient and low‐cost electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is paramount for water splitting associated with the storage of clean and renewable energy. Here, this study reports its findings in the development of a nanostructured perovskite oxide as OER/HER bifunctional electrocatalyst for overall water splitting. Prepared by a facile electrospinning method, SrNb_0.1Co_0.7Fe_0.2O_3–δ perovskite nanorods (SNCF‐NRs) display excellent OER and HER activity and stability in an alkaline solution, benefiting from the catalytic nature of perovskites and unique structural features. More importantly, the SNCF‐NR delivers a current density of 10 mA cm^?2 at a cell voltage of merely ≈1.68 V while maintaining remarkable durability when used as both anodic and cathodic catalysts in an alkaline water electrolyzer. The performance of this bifunctional perovskite material is among the best ever reported for overall water splitting, offering a cost‐effective alternative to noble metal based electrocatalysts.     

Polydopamine‐Inspired,Dual Heteroatom‐Doped Carbon Nanotubes for Highly Efficient Overall Water Splitting

Overall water splitting involved hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are critical for renewable energy conversion and storage. Heteroatom‐doped carbon materials have been extensively employed as efficient electrocatalysts for independent HER or OER processes, while those as the bifunctional catalysts for simultaneously generating H₂ and O₂ by splitting water have been seldom reported. Inspired by the unparalleled virtues of polydopamine, the authors devise the facile synthesis of nitrogen and sulfur dual‐doped carbon nanotubes with in situ, homogenous and high concentration sulfur doping. The newly developed dual‐doped electrocatalysts display superb bifunctional catalytic activities for both HER and OER in alkaline solutions, outperforming all other reported carbon counterparts. Experimental characterizations confirm that the excellent performance is attributed to the multiple doping together with efficient mass and charge transfer, while theoretical computations reveal the promotion effect of secondary sulfur dopant to enhance the spin density of dual‐doped samples and consequently to form highly electroactive sites for both HER and OER.     

Recent Development of Ni/Fe‐Based Micro/Nanostructures toward Photo/Electrochemical Water Oxidation

The oxygen evolution reaction (OER), as an important process involved in water splitting and rechargeable metal–air batteries, has drawn increasing attention in the context of clean energy generation and efficient energy storage. This review concerns the progress and new discoveries in the field of Ni/Fe‐based micro/nanostructures toward electrochemical and photo‐electrochemical (PEC) water oxidation during last few years. First, toward the design and construction of new electrocatalysis, different types of current Ni/Fe‐based compounds for OER are summarized. The mechanism studies of the active phases and positions of Ni/Fe‐based micro/nanostructures are further introduced to understand the properties of catalytic active sites, which could facilitate further improving the performance of Ni/Fe‐based OER electrocatalysts. Second, splitting water using sunlight with low overpotential is another important target in making solar‐to‐hydrogen micro/nanodevices, and thus attention is then focused on the development of several important Ni/Fe‐based PEC catalysts. Third, the recent theoretical calculations on the OER mechanism during water splitting and insights into electronic structures are analyzed; finally, the future trends and perspectives are also discussed briefly.     

High‐Performance Trifunctional Electrocatalysts Based on FeCo/Co2P Hybrid Nanoparticles for Zinc–Air Battery and Self‐Powered Overall Water Splitting

Currently, it is still a significant challenge to simultaneously boost various reactions by one electrocatalyst with high activity, excellent durability, as well as low cost. Herein, hybrid trifunctional electrocatalysts are explored via a facile one‐pot strategy toward an efficient oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The catalysts are rationally designed to be composed by FeCo nanoparticles encapsuled in graphitic carbon films, Co₂P nanoparticles, and N,P‐codoped carbon nanofiber networks. The FeCo nanoparticles and the synergistic effect from Co₂P and FeCo nanoparticles make the dominant contributions to the ORR, OER, and HER activities, respectively. Their bifunctional activity parameter (?E) for ORR and OER is low to 0.77 V, which is much smaller than those of most nonprecious metal catalysts ever reported, and comparable with state‐of‐the‐art Pt/C and RuO₂ (0.78 V). Accordingly, the as‐assembled Zn–air battery exhibits a high power density of 154 mW cm^?2 with a low charge–discharge voltage gap of 0.83 V (at 10 mA cm^?2) and excellent stability. The as‐constructed overall water‐splitting cell achieves a current density of 10 mA cm^?2 (at 1.68 V), which is comparable to the best reported trifunctional catalysts.     

Trifunctional Electrocatalysis on Dual‐Doped Graphene Nanorings–Integrated Boxes for Efficient Water Splitting and Zn–Air Batteries

Despite the exciting achievements made in synthesis of monofunctional electrocatalysts for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), or hydrogen evolution reaction (HER), it is challenging to develop trifunctional electrocatalysts for both ORR/OER/HER. Herein, N, O‐codoped graphene nanorings‐integrated boxes (denoted NOGB) are crafted via high‐temperature pyrolysis and following acid etching of hybrid precursors containing polymers and Prussian blue analogue cubes. The electrochemical results signified that the resulting NOGB‐800 (800 refers to pyrolysis temperature) is highly active for trifunctional electrocatalysis of ORR/OER/HER. This can be reasonably attributed to the advanced nanostructures (i.e., the hierarchically porous nanostructures on the hollow nanorings) and unique chemical compositions (i.e., N, O‐codoped graphene). More attractively, the rechargeable Zn–air battery based on NOGB‐800 displays maximum power density of 111.9 mW cm^?2 with small charge–discharge potential of 0.72 V and excellent stability of 30 h, comparable with the Pt/C+Ir/C counterpart. The NOGB‐800 could also be utilized as bifunctional electrocatalysts for overall water splitting to yield current density of 10 mA cm^?2 at a voltage of 1.65 V, surpassing most reported electrocatalysts. Therefore, the NOGB‐800 is a promising candidate instead of precious metal–based electrocatalysts for the efficient Zn–air battery and water splitting.     

Graphitic‐Shell Encapsulation of Metal Electrocatalysts for Oxygen Evolution,Oxygen Reduction,and Hydrogen Evolution in Alkaline Solution

Developing highly efficient, cost effective, and environmentally friendly electrocatalysts for the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER) is of interest for sustainable and clean energy technologies, including metal–air batteries and fuel cells. In this work, the screening of electrocatalytic activities of a series of single metallic iron, cobalt, and nickel nanoparticles and their binary and ternary alloys encapsulated in a graphitic carbon shell toward the OER, ORR, and HER in alkaline media is reported. Synthesis of these compounds proceeds by a two‐step sol–gel and carbothermal reduction procedure. Various ex situ characterizations show that with harsh electrochemical activation, the graphitic shell undergoes an electrochemical exfoliation. The modified electronic properties of the remaining graphene layers prevent their exfoliation, protect the bulk of the metallic cores, and participate in the electrocatalysis. The amount of near‐surface, higher‐oxidation‐state metals in the as‐prepared samples increases with electrochemical cycling, indicating that some metallic nanoparticles are not adequately encased within the graphite shell. Such surface oxide species provide secondary active sites for the electrocatalytic activities. The Ni–Fe binary system gives the most promising results for the OER, and the Co–Fe binary system shows the most promise for the ORR and HER.     

Electroless Plating of Highly Efficient Bifunctional Boride‐Based Electrodes toward Practical Overall Water Splitting

Exploring highly‐efficient and low‐cost electrodes for both hydrogen and oxygen evolution reaction (HER and OER) is of primary importance to economical water splitting. Herein, a series of novel and robust bifunctional boride‐based electrodes are successfully fabricated using a versatile Et₂NHBH₃‐involved electroless plating (EP) approach via deposition of nonprecious boride‐based catalysts on various substrates. Owing to the unique binder‐free porous nodule structure induced by the hydrogen release EP reaction, most of the nonprecious boride‐based electrodes are highly efficient for overall water splitting. As a distinctive example, the Co‐B/Ni electrode can afford 10 mA cm^?2 at overpotentials of only 70 mV for HER and 140 mV for OER, and can also survive at large current density of 1000 mA cm^?2 for over 20 h without performance degradation in 1.0 m KOH. Several boride‐based two‐electrode electrolyzers can achieve 10 mA cm^?2 at low voltages of around 1.4 V. Moreover, the facile EP approach is economically viable for flexible and large size electrode production.     

Copper–Nickel Nitride Nanosheets as Efficient Bifunctional Catalysts for Hydrazine‐Assisted Electrolytic Hydrogen Production

Electrocatalytic water splitting is one of the sustainable and promising strategies to generate hydrogen fuel but still remains a great challenge because of the sluggish anodic oxygen evolution reaction (OER). A very effective approach to dramatically decrease the input cell voltage of water electrolysis is to replace the anodic OER with hydrazine oxidation reaction (HzOR) due to its lower thermodynamic oxidation potential. Therefore, developing the low‐cost and efficient HzOR catalysts, coupled with the cathodic hydrogen evolution reaction (HER), is tremendously important for energy‐saving electrolytic hydrogen production. Herein, a new‐type of copper–nickel nitride (Cu₁Ni₂‐N) with rich Cu₄N/Ni₃N interface is rationally constructed on carbon fiber cloth. The 3D electrode exhibits extraordinary HER performance with an overpotential of 71.4 mV at 10 mA cm^?2 in 1.0 m KOH, simultaneously delivering an ultralow potential of 0.5 mV at 10 mA cm^?2 for HzOR in a 1.0 m KOH/0.5 m hydrazine electrolyte. Moreover, the electrolytic cell utilizing the synthesized Cu₁Ni₂‐N electrode as both the cathode and anode display a cell voltage of 0.24 V at 10 mA cm^?2 with an excellent stability over 75 h. The present work develops the promising copper–nickel‐based nitride as a bifunctional electrocatalyst through hydrazine‐assistance for energy‐saving electrolytic hydrogen production.     

Multifunctional Single‐Crystallized Carbonate Hydroxides as Highly Efficient Electrocatalyst for Full Water splitting

The controllable synthesis of single‐crystallized iron‐cobalt carbonate hydroxide nanosheets array on 3D conductive Ni foam (FCCH/NF) as a monolithic oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) bifunctional electrocatalyst for full water splitting is described. The results demonstrate that the incorporation of Fe can effectively tune the morphology, composition, electronic structure, and electrochemical active surface area of the electrocatalysts, thus greatly enhancing the intrinsic electrocatalytic activity. The optimal electrocatalyst (F_0.25C₁CH/NF) can deliver 10 and 1000 mA cm^?2 at very small overpotentials of 77 and 256 mV for HER and 228 and 308 mV for OER in 1.0 m KOH without significant interference from gas evolution. The F_0.25C₁CH‐based two‐electrode alkaline water electrolyzer only requires cell voltages of 1.45 and 1.52 V to achieve current densities of 10 and 500 mA cm^?2. The results demonstrate that such fascinating electrocatalytic activity can be ascribed to the increase in the catalytic active surface area, facilitated electron and mass transport properties, and the synergistic interactions because of the incorporation of Fe.     

Nitrogen‐Doped Porous Molybdenum Carbide and Phosphide Hybrids on a Carbon Matrix as Highly Effective Electrocatalysts for the Hydrogen Evolution Reaction

The efficient evolution of hydrogen through electrocatalysis is considered a promising approach to the production of clean hydrogen fuel. Platinum (Pt)‐based materials are regarded as the most active hydrogen evolution reaction (HER) catalysts. However, the low abundance and high cost of Pt hinders the large‐scale application of these catalysts. Active, inexpensive, and earth‐abundant electrocatalysts to replace Pt‐based materials would be highly beneficial to the production of cost‐effective hydrogen energy. Herein, a novel organoimido‐derivatized heteropolyoxometalate, Mo4‐CNP, is designed as a precursor for electrocatalysts of the HER. It is demonstrated that the carbon, nitrogen, and phosphorus sources derived from the Mo4‐CNP molecules lead to in situ confined carburization, phosphorization, and chemical doping on an atomic scale, thus forming nitrogen‐doped porous molybdenum carbide and phosphide hybrids, which exhibit remarkable electrocatalytic activity for the HER. Such an organically functionalized polyoxometalate‐assisted strategy described here provides a new perspective for the development of highly active non‐noble metal electrocatalysts for hydrogen evolution.     

Monolithic Photoassisted Water Splitting Device Using Anodized Ni‐Fe Oxygen Evolution Catalytic Substrate

Large‐scale industrial application of solar‐driven water splitting has called for the development of oxygen evolution reaction (OER) catalysts that deliver high catalytic activity and stability. Here it is shown that an efficient OER catalytic substrate can be developed by roll‐to‐roll fabrication of electrodeposited Ni‐Fe foils, followed by anodization. An amorphous oxyhydroxide layer directly formed on Ni‐Fe foils exhibits high catalytic activity toward water oxidation in 1 m KOH solution, which requires an overpotential of 0.251 V to reach current density of 10 mA cm^–2. The developed catalytic electrode shows the best OER activity among catalysts with film structure. The catalyst also shows prolonged stability at vigorous gas evolution condition for 36 h. To demonstrate the monolithic photoassisted water splitting device, an amorphous silicon solar cell is fabricated on Ni‐Fe catalytic substrate, resulting in lowering OER overpotential under light illumination. This monolithic device is the first demonstration that the OER catalytic substrates and the solar cells are integrated and can be easily applied for industrial scale solar‐driven water electrolysis.     

Rational Design of Graphene‐Supported Single Atom Catalysts for Hydrogen Evolution Reaction

The proper choice of nonprecious transition metals as single atom catalysts (SACs) remains unclear for designing highly efficient electrocatalysts for hydrogen evolution reaction (HER). Herein, reported is an activity correlation with catalysts, electronic structure, in order to clarify the origin of reactivity for a series of transition metals supported on nitrogen‐doped graphene as SACs for HER by a combination of density functional theory calculations and electrochemical measurements. Only few of the transition metals (e.g., Co, Cr, Fe, Rh, and V) as SACs show good catalytic activity toward HER as their Gibbs free energies are varied between the range of –0.20 to 0.30 eV but among which Co‐SAC exhibits the highest electrochemical activity at 0.13 eV. Electronic structure studies show that the energy states of active valence d_z² orbitals and their resulting antibonding state determine the catalytic activity for HER. The fact that the antibonding state orbital is neither completely empty nor fully filled in the case of Co‐SAC is the main reason for its ideal hydrogen adsorption energy. Moreover, the electrochemical measurement shows that Co‐SAC exhibits a superior hydrogen evolution activity over Ni‐SAC and W‐SAC, confirming the theoretical calculation. This systematic study gives a fundamental understanding about the design of highly efficient SACs for HER.     

From Water Oxidation to Reduction: Homologous Ni–Co Based Nanowires as Complementary Water Splitting Electrocatalysts

A homologous Ni–Co based nanowire system, consisting of both nickel cobalt oxide and nickel cobalt sulfide nanowires, is developed for efficient, complementary water splitting. The spinel‐type nickel cobalt oxide (NiCo₂O₄) nanowires are hydrothermally synthesized and can serve as an excellent oxygen evolution reaction catalyst. Subsequent sulfurization of the NiCo₂O₄ nanowires leads to the formation of pyrite‐type nickel cobalt sulfide (Ni_0.33Co_0.67S₂) nanowires. Due to the 1D nanowire morphology and enhanced charge transport capability, the Ni_0.33Co_0.67S₂ nanowires function as an efficient, stable, and robust nonnoble metal electrocatalyst for hydrogen evolution reaction (HER), substantially exceeding CoS₂ or NiS₂ nanostructures synthesized under similar methods. The Ni_0.33Co_0.67S₂ nanowires exhibit low onset potential of ?65, ?39, and ?50 mV versus reversible hydrogen electrode, Tafel slopes of 44, 68, and 118 mV dec^?1 at acidic, neutral, and basic conditions, respectively, and excellent stability, comparable to the best reported non‐noble metal‐based HER catalysts. Furthermore, the homologous Ni_0.33Co_0.67S₂ nanowires and NiCo₂O₄ nanowires are assembled into an all‐nanowire based water splitting electrolyzer with a current density of 5 mA cm^?2 at a voltage as 1.65 V, thus suggesting a unique homologous, earth abundant material system for water splitting.     

Synergistically Tuning Water and Hydrogen Binding Abilities Over Co4N by Cr Doping for Exceptional Alkaline Hydrogen Evolution Electrocatalysis

Searching for highly efficient and cost‐effective electrocatalysts toward the hydrogen evolution reaction (HER) in alkaline electrolyte is highly desirable for the development of alkaline water splitting, but still remains a significant challenge. Herein, the rational design of Cr‐doped Co₄N nanorod arrays grown on carbon cloth (Cr–Co₄N/CC) that can efficiently catalyze the HER in alkaline media is reported. It displays outstanding performance, with the exceptionally small overpotential of 21 mV to obtain the current density of 10 mA cm^?2 and good stability in 1.0 m KOH, which is even better than the commercial Pt/C electrocatalyst, and much lower than most of the reported transition metal nitride‐based and other non‐noble metal‐based electrocatalysts toward the alkaline HER. Density functional theory (DFT) calculations and experimental results reveal that the Cr atoms not only act as oxophilic sites for boosting water adsorption and dissociation, but also modulate the electronic structure of Co₄N to endow optimized hydrogen binding abilities on Co atoms, thereby leading to accelerating both the alkaline Volmer and Heyrovsky reaction kinetics. In addition, this strategy can be extended to other metals (such as Mo, Mn, and Fe) doped Co₄N electrocatalysts, thus may open up a new avenue for the rational design of highly efficient transition metal nitride‐based HER catalysts and beyond.     

Ultrathin High Surface Area Nickel Boride (NixB) Nanosheets as Highly Efficient Electrocatalyst for Oxygen Evolution

The overriding obstacle to mass production of hydrogen from water as the premium fuel for powering our planet is the frustratingly slow kinetics of the oxygen evolution reaction (OER). Additionally, inadequate understanding of the key barriers of the OER is a hindrance to insightful design of advanced OER catalysts. This study presents ultrathin amorphous high‐surface area nickel boride (Ni_x B) nanosheets as a low‐cost, very efficient and stable catalyst for the OER for electrochemical water splitting. The catalyst affords 10 mA cm^?2 at 0.38 V overpotential during OER in 1.0 m KOH, reducing to only 0.28 V at 20 mA cm^?2 when supported on nickel foam, which ranks it among the best reported nonprecious catalysts for oxygen evolution. Operando X‐ray absorption fine‐structure spectroscopy measurements reveal prevalence of NiOOH, as well as Ni‐B under OER conditions, owing to a Ni‐B core@nickel oxyhydroxide shell (Ni‐B@NiO_x H) structure, and increase in disorder of the NiO_x H layer, thus revealing important insight into the transient states of the catalyst during oxygen evolution.     

Ultrafine Metal Nanoparticles/N‐Doped Porous Carbon Hybrids Coated on Carbon Fibers as Flexible and Binder‐Free Water Splitting Catalysts

By employing in situ reduction of metal precursor and metal‐assisted carbon etching process, this study achieves a series of ultrafine transition metal‐based nanoparticles (Ni–Fe, Ni–Mo) embedded in N‐doped carbon, which are found efficient catalysts for electrolytic water splitting. The as‐prepared hybrid materials demonstrate outstanding catalytic activities as non‐noble metal electrodes rendered by the synergistic effect of bimetal elements and N‐dopants, the improved electrical conductivity, and hydrophilism. Ni/Mo₂C@N‐doped porous carbon (NiMo‐polyvinylpyrrolidone (PVP)) and NiFe@N‐doped carbon (NiFe‐PVP) produce low overpotentials of 130 and 297 mV at a current density of 10 mA cm^?2 as catalysts for hydrogen evolution reaction and oxygen evolution reaction, respectively. In addition, these binder‐free electrodes show long‐term stability. Overall water splitting is also demonstrated based on the couple of NiMo‐PVP||NiFe‐PVP catalyzer. This represents a simple and effective synthesis method toward a new type of nanometal–carbon hybrid electrodes.     

Earth‐Abundant Iron Diboride (FeB2) Nanoparticles as Highly Active Bifunctional Electrocatalysts for Overall Water Splitting

Developing efficient, durable, and earth‐abundant electrocatalysts for both hydrogen and oxygen evolution reactions is important for realizing large‐scale water splitting. The authors report that FeB₂ nanoparticles, prepared by a facile chemical reduction of Fe²⁺ using LiBH₄ in an organic solvent, are a superb bifunctional electrocatalyst for overall water splitting. The FeB₂ electrode delivers a current density of 10 mA cm^?2 at overpotentials of 61 mV for hydrogen evolution reaction (HER) and 296 mV for oxygen evolution reaction (OER) in alkaline electrolyte with Tafel slopes of 87.5 and 52.4 mV dec^?1, respectively. The electrode can sustain the HER at an overpotential of 100 mV for 24 h and OER for 1000 cyclic voltammetry cycles with negligible degradation. Density function theory calculations demonstrate that the boron‐rich surface possesses appropriate binding energy for chemisorption and desorption of hydrogen‐containing intermediates, thus favoring the HER process. The excellent OER activity of FeB₂ is ascribed to the formation of a FeOOH/FeB₂ heterojunction during water oxidation. An alkaline electrolyzer is constructed using two identical FeB₂‐NF electrodes as both anode and cathode, which can achieve a current density of 10 mA cm^?2 at 1.57 V for overall water splitting with a faradaic efficiency of nearly 100%, rivalling the integrated state‐of‐the‐art Pt/C and RuO₂/C.