Highly Reproducible Sn‐Based Hybrid Perovskite Solar Cells with 9% Efficiency

The low power conversion efficiency (PCE) of tin‐based hybrid perovskite solar cells (HPSCs) is mainly attributed to the high background carrier density due to a high density of intrinsic defects such as Sn vacancies and oxidized species (Sn⁴⁺) that characterize Sn‐based HPSCs. Herein, this study reports on the successful reduction of the background carrier density by more than one order of magnitude by depositing near‐single‐crystalline formamidinium tin iodide (FASnI₃) films with the orthorhombic a‐axis in the out‐of‐plane direction. Using these highly crystalline films, obtained by mixing a very small amount (0.08 m ) of layered (2D) Sn perovskite with 0.92 m (3D) FASnI₃, for the first time a PCE as high as 9.0% in a planar p–i–n device structure is achieved. These devices display negligible hysteresis and light soaking, as they benefit from very low trap‐assisted recombination, low shunt losses, and more efficient charge collection. This represents a 50% improvement in PCE compared to the best reference cell based on a pure FASnI₃ film using SnF₂ as a reducing agent. Moreover, the 2D/3D‐based HPSCs show considerable improved stability due to the enhanced robustness of the perovskite film compared to the reference cell.     

Metal‐Nanowire‐Electrode‐Based Perovskite Solar Cells: Challenging Issues and New Opportunities

Recently, organometal halide perovskite (OMHP)‐based solar cells have been regarded as one of the most promising technologies in the research field of renewable energy applications. Along with successful demonstrations of high power conversion efficiencies (PCEs), various characteristic strategies for fabricating functional OMHP‐based solar cells have been exploited to facilitate both their practical applicability and industrial suitability. As a part of such efforts, unconventional transparent conductive electrodes have been suggested based on the implementation of metal nanowires (MeNWs), which possess both high transparency and low sheet resistance, in order to replace traditional counterparts such as costly, limitedly‐flexible vacuum‐deposited conductive metal oxides. This allows for the facile fabrication of solution‐processable, low‐cost, highly flexible, high‐performance solar cell devices. In this review, the recent progress on OMHP solar cells integrated with MeNW‐network electrodes is investigated and the challenges associated with the integration of MeNW‐network electrodes are comprehensively addressed with the suggestion of possible solutions for resolving the critical issues.     

Composition Engineering in Doctor‐Blading of Perovskite Solar Cells

Organic–inorganic halide perovskite (OIHP) solar cells with efficiency over 18% power conversion efficiency (PCE) have been widely achieved with lab scale spin‐coating method which is however not scalable for the fabrication of large area solar panels. The PCEs of OIHP solar cells made by scalable deposition methods, such as doctor‐blading or slot‐die coating, have been lagging far behind than spin‐coated devices. In this study the authors report composition engineering in doctor‐bladed OIHP solar cells with p–i–n planar heterojunction structure to enhance their efficiency. Phase purer OIHP thin films are obtained by incorporating a small amount of cesium (Cs⁺) and bromine (Br^?) ions into perovskite precursor solution, which also reduces the required film formation temperature. Pinhole free OIHP thin films with micrometer‐sized grains have been obtained assisted by a secondary grain growth with added methylammonium chloride into the precursor solution. The OIHP solar cells using these bladed thin films achieved PCEs over 19.0%, with the best stabilized PCE reaching 19.3%. This represents a significant step toward scalable manufacture of OIHP solar cells.     

Chlorinated Fullerene Dimers for Interfacial Engineering Toward Stable Planar Perovskite Solar Cells with 22.3% Efficiency

A major limit for planar perovskite solar cells is the trap‐mediated hysteresis and instability, due to the defective metal oxide interface with the perovskite layer. Passivation engineering with fullerenes has been identified as an effective approach to modify this interface. The rational design of fullerene molecules with exceptional electrical properties and versatile chemical moieties for targeted defect passivation is therefore highly demanded. In this work, novel fulleropyrrolidine (NMBF‐X, X?H or Cl) monomers and dimers are synthesized and incorporated between metal oxides (i.e. TiO₂, SnO₂) and perovskites (i.e. MAPbI₃ and (FAPbI₃)_x(MAPbBr₃)_1‐x). The fullerene dimers provide superior stability and efficiency improvements compared to the corresponding monomers, with chlorinated fullerene dimers being most effective at coordinating with both metal oxides and perovskite via the chlorine terminals. The non‐encapsulated planar device delivers a maximum power conversion efficiency of 22.3% without any hysteresis, while maintaining over 98% of initial efficiency after ambient storage for 1000 h, and exhibiting an order of magnitude improvement of the T₈₀ lifetime.     

Carbon Nanoparticles in High‐Performance Perovskite Solar Cells

In the past few years, organic–inorganic metal halide ABX₃ perovskites (A = Rb, Cs, methylammonium, formamidinium (FA); B = Pb, Sn; X = Cl, Br, I) have rapidly emerged as promising materials for photovoltaic applications. Tuning the film morphology by various deposition techniques and additives is crucial to achieve solar cells with high performance and long‐term stability. In this work, carbon nanoparticles (CNPs) containing functional groups are added to the perovskite precursor solution for fabrication of fluorine‐doped tin oxide/TiO₂/perovskite/spiro‐OMeTAD/gold devices. With the addition of CNPs, the perovskite films are thermally more stable, contain larger grains, and become more hydrophobic. NMR experiments provide strong evidence that the functional groups of the CNPs interact with FA cations already in the precursor solution. The fabricated solar cells show a power‐conversion efficiency of 18% and negligible hysteresis.     

Precursor Engineering for Ambient‐Compatible Antisolvent‐Free Fabrication of High‐Efficiency CsPbI2Br Perovskite Solar Cells

High temperature stable inorganic CsPbX₃ (X: I, Br, or mixed halides) perovskites with their bandgap tailored by tuning the halide composition offer promising opportunities in the design of ideal top cells for high‐efficiency tandem solar cells. Unfortunately, the current high‐efficiency CsPbX₃ perovskite solar cells (PSCs) are prepared in vacuum, a moisture‐free glovebox or other low‐humidity conditions due to their poor moisture stability. Herein, a new precursor system (HCOOCs, HPbI₃, and HPbBr₃) is developed to replace the traditional precursors (CsI, PbI₂, and PbBr₂) commonly used for solar cells of this type. Both the experiments and calculations reveal that a new complex (HCOOH?Cs⁺) is generated in this precursor system. The new complex is not only stable against aging in humid air ambient at 91% relative humidity, but also effectively slows the perovskite crystallization, making it possible to eliminate the popular antisolvent used in the perovskite CsPbI₂Br film deposition. The CsPbI₂Br PSCs based on the new precursor system achieve a champion efficiency of 16.14%, the highest for inorganic PSCs prepared in ambient air conditions. Meanwhile, high air stability is demonstrated for an unencapsulated CsPbI₂Br PSC with 92% of the original efficiency remaining after more than 800 h aging in ambient air.     

Polymer Doping for High‐Efficiency Perovskite Solar Cells with Improved Moisture Stability

Each component layer in a perovskite solar cell plays an important role in the cell performance. Here, a few types of polymers including representative p‐type and n‐type semiconductors, and a classical insulator, are chosen to dope into a perovskite film. The long‐chain polymer helps to form a network among the perovskite crystalline grains, as witnessed by the improved film morphology and device stability. The dewetting process is greatly suppressed by the cross‐linking effect of the polymer chains, thereby resulting in uniform perovskite films with large grain sizes. Moreover, it is found that the polymer‐doped perovskite shows a reduced trap‐state density, likely due to the polymer effectively passivating the perovskite grain surface. Meanwhile the doped polymer formed a bridge between grains for efficient charge transport. Using this approach, the solar cell efficiency is improved from 17.43% to as high as 19.19%, with a much improved stability. As it is not required for the polymer to have a strict energy level matching with the perovskite, in principle, one may use a variety of polymers for this type of device design.     

Malleability and Pliability of Silk‐Derived Electrodes for Efficient Deformable Perovskite Solar Cells

For the fabrication of deformable electronic devices, electrodes that are robust against repeated bending, twisting, stretching, folding, reversible plasticizing, and that maintain electrical conductivity, and so on, are required. Malleable and pliable silk‐derived electrodes are fabricated to enable the shape deformation of perovskite solar cells. Moisture‐driven silk‐derived electrodes show reversible plasticization with malleability and pliability, realizing diverse deformation from simple operations (including bending, folding, stretching, etc.) to complicated structures (including flower, bowknot, and paper crane). It is worth noting that the silk‐derived electrodes maintain electrical conductivity (15.8 Ω sq^?1) compared to their initial value (15 Ω sq^?1) even after suffering from reversible mechanical plasticization of complicated structures. Deformable perovskite solar cells are fabricated with the silk‐derived electrodes and achieve a power conversion efficiency of 10.40%. The devices maintain 92% of the initial efficiency after 1000 bends at a curvature radius of 2.5 mm. The power does not decline at 50% strain and keeps more than 60% of the initial value after stretching for 50 cycles. Malleability and pliability of silk‐derived electrodes benefit the realization of stretchable perovskite solar cells and deformable electronic devices.     

Development of Next‐Generation Organic‐Based Solar Cells: Studies on Dye‐Sensitized and Perovskite Solar Cells

Next‐generation organic solar cells such as dye‐sensitized solar cells (DSSCs) and perovskite solar cells (PSCs) are studied at the National Institute of Advanced Industrial Science and Technology (AIST), and their materials, electronic properties, and fabrication processes are investigated. To enhance the performance of DSSCs, the basic structure of an electron donor, π‐electron linker, and electron acceptor, i.e., D–π–A, is suggested. In addition, special organic dyes containing coumarin, carbazole, and triphenylamine electron donor groups are synthesized to find an effective dye structure that avoids charge recombination at electrode surfaces. Meanwhile, PSCs are manufactured using both a coating method and a laser deposition technique. The results of interfacial studies demonstrate that the level of the conduction band edge (CBE) of a compact TiO₂ layer is shifted after TiCl₄ treatment, which strongly affects the solar cell performance. Furthermore, a special laser deposition system is developed for the fabrication of the perovskite layers of PSCs, which facilitates the control over the deposition rate of methyl ammonium iodide used as their precursor.     

Monolithic Perovskite Tandem Solar Cells: A Review of the Present Status and Advanced Characterization Methods Toward 30% Efficiency

Tandem solar cells are the next step in the photovoltaic (PV) evolution due to their higher power conversion efficiency (PCE) potential than currently dominating, but inherently limited, single‐junction solar cells. With the emergence of metal halide perovskite absorber materials, the fabrication of highly efficient tandem solar cells, at a reasonable cost, can significantly impact the future PV landscape. The perovskite‐based tandem solar cells have already shown that they can convert light more efficiently than their standalone sub‐cells. However, to reach PCEs over 30%, several challenges have to be overcome and the understanding of this fascinating technology has to be broadened. In this review, the main scientific and engineering challenges in the field are presented, alongside a discussion of the current status of three main perovskite tandem technologies: perovskite/silicon, perovskite/CIGS, and perovskite/perovskite tandem solar cells. A summary of the advanced structural, electrical, optical, radiative, and electronic characterization methods as well as simulations being utilized for perovskite‐based tandem solar cells is presented. The main findings are summarized and the strength of the techniques to overcome the challenges and gain deeper knowledge for further performance improvement is assessed. Finally, the PCE potential in different experimental and theoretical limits is compared with an aim to shed light on the path towards overcoming the 30% efficiency threshold for all of the three herein reviewed tandem technologies.     

MXene‐Contacted Silicon Solar Cells with 11.5% Efficiency

MXene, a new class of 2D materials, has gained significant attention owing to its attractive electrical conductivity, tunable work function, and metallic nature for wide range of applications. Herein, delaminated few layered Ti₃C₂T_x MXene contacted Si solar cells with a maximum power conversion efficiency (PCE) of ≈11.5% under AM1.5G illumination are demonstrated. The formation of an Ohmic junction of the metallic MXene to n⁺‐Si surface efficiently extracts the photogenerated electrons from n⁺np⁺‐Si, decreases the contact resistance, and suppresses the charge carrier recombination, giving rise to excellent open‐circuit voltage and short‐circuit current density. The rapid thermal annealing process further improves the electrical contact between Ti₃C₂T_x MXene and n⁺‐Si surface by reducing sheet resistance, increasing electrical conductivity, and decreasing cell series resistance, thus leading to a remarkable improvement in fill factor and overall PCE. The work demonstrated here can be extended to other MXene compositions as potential electrodes for developing highly performing solar cells.     

Enhanced Efficiency of Hot‐Cast Large‐Area Planar Perovskite Solar Cells/Modules Having Controlled Chloride Incorporation

Organic–inorganic perovskite photovoltaics are an emerging solar technology. Developing materials and processing techniques that can be implemented in large‐scale manufacturing is extremely important for realizing the potential of commercialization. Here we report a hot‐casting process with controlled Cl^? incorporation which enables high stability and high power‐conversion‐efficiencies (PCEs) of 18.2% for small area (0.09 cm²) and 15.4% for large‐area (≈1 cm²) single solar cells. The enhanced performance versus tri‐iodide perovskites can be ascribed to longer carrier diffusion lengths, improved uniformity of the perovskite film morphology, favorable perovskite crystallite orientation, a halide concentration gradient in the perovskite film, and reduced recombination by introducing Cl^?. Additionally, Cl^? improves the device stability by passivating the reaction between I^? and the silver electrode. High‐quality thin films deployed over a large‐area 5 cm × 5 cm eight‐cell module have been fabricated and exhibit an active‐area PCE of 12.0%. The feasibility of material and processing strategies in industrial large‐scale coating techniques is then shown by demonstrating a “dip‐coating” process which shows promise for large throughput production of perovskite solar modules.     

High‐Performance Solution‐Processed Double‐Walled Carbon Nanotube Transparent Electrode for Perovskite Solar Cells

Double‐walled carbon nanotubes are between single‐walled carbon nanotubes and multiwalled carbon nanotubes. They are comparable to single‐walled carbon nanotubes with respect to the light optical density, but their mechanical stability and solubility are higher. Exploiting such advantages, solution‐processed transparent electrodes are demonstrated using double‐walled carbon nanotubes and their application to perovskite solar cells is also demonstrated. Perovskite solar cells which harvest clean solar power have attracted a lot of attention as a next‐generation renewable energy source. However, their eco‐friendliness, cost, and flexibility are limited by the use of transparent oxide conductors, which are inflexible, difficult to fabricate, and made up of expensive rare metals. Solution‐processed double‐walled carbon nanotubes can replace conventional transparent electrodes to resolve such issues. Perovskite solar cells using the double‐walled carbon nanotube transparent electrodes produce an operating power conversion efficiency of 17.2% without hysteresis. As the first solution‐processed electrode‐based perovskite solar cells, this work will pave the pathway to the large‐size, low‐cost, and eco‐friendly solar devices.     

Room‐Temperature Vapor Deposition of Cobalt Nitride Nanofilms for Mesoscopic and Perovskite Solar Cells

Organic/inorganic hybrid solar cells, typically mesoscopic and perovskite solar cells, are regarded as promising candidates to replace conventional silicon or thin film photovoltaics. There have been intensive investigations on the development of advanced materials for improved power conversion efficiencies, however, economical feasibilities and reliabilities of the organic/inorganic photovoltaics are yet to reach at a sufficient level for practical utilizations. In this study, cobalt nitride (CoN) nanofilms prepared by room‐temperature vapor deposition in an inert N₂ atmosphere, which is a facile and highly reproducible procedure, are proposed as a low‐cost counter electrode in mesoscopic dye‐sensitized solar cells (DSCs) and a hole transport material in inverted planar perovskite solar cells (PSCs) for the first time. The CoN film successfully replaces conventional Pt in DSCs, resulting in a power conversion efficiency comparable to the ones based on Pt. In addition, PSCs employing the CoN manifest high efficiency even up to 15.0%, which is comparable to state‐of‐the‐art performance in the cases of PSCs employing inorganic hole transporters. Furthermore, flexible solar cell applications of the CoN are performed in both mesoscopic and perovskite solar cells, verifying the advantages of the room‐temperature deposition process and feasibilities of the CoN nanofilms in various fields.