Surface‐Plasmon‐Assisted Photoelectrochemical Reduction of CO2 and NO3− on Nanostructured Silver Electrodes

Electrochemical reduction of carbon dioxide (CO₂) typically suffers from low selectivity and poor reaction rates that necessitate high overpotentials, which impede its possible application for CO₂ capture, sequestration, or carbon‐based fuel production. New strategies to address these issues include the utilization of photoexcited charge carriers to overcome activation barriers for reactions that produce desirable products. This study demonstrates surface‐plasmon‐enhanced photoelectrochemical reduction of CO₂ and nitrate (NO₃^?) on silver nanostructured electrodes. The observed photocurrent likely originates from a resonant charge transfer between the photogenerated plasmonic hot electrons and the lowest unoccupied molecular orbital (MO) acceptor energy levels of adsorbed CO₂, NO₃^?, or their reductive intermediates. The observed differences in the resonant effects at the Ag electrode with respect to electrode potential and photon energy for CO₂ versus NO₃^? reduction suggest that plasmonic hot‐carriers interact selectively with specific MO acceptor energy levels of adsorbed surface species such as CO₂, NO₃^?, or their reductive intermediates. This unique plasmon‐assisted charge generation and transfer mechanism can be used to increase yield, efficiency, and selectivity of various photoelectrochemical processes.     

Long‐Lived,Visible‐Light‐Excited Charge Carriers of TiO2/BiVO4 Nanocomposites and their Unexpected Photoactivity for Water Splitting

Different mole ratios of TiO₂/BiVO₄ nanocomposites with effective contacts have are fabricated by putting BiVO₄ nanoparticles into the TiO₂ sol, followed by thermal treatment at 450 °C. Based on the transient‐state surface photovoltage responses and the atmosphere‐controlled steady‐state surface photovoltage spectra, it is concluded that the photogenerated charge carriers in the TiO₂/BiVO₄ nanocomposite with a proper mole ratio (5%) display much longer lifetime and higher separation than those in the BiVO₄ alone. This is responsible for the unexpected activity for photoelectrochemical oxidation of water, for photocatalytic production of H₂, and for photocatalytic degradation of phenol as a model pollutant under visible irradiation. Moreover, it is suggested that the prolonged lifetime and increased separation of photogenerated charges in the fabricated TiO₂/BiVO₄ nanocomposite is attributed to the unusual spatial transfer of visible‐excited high‐energy electrons of BiVO₄ to TiO₂. This work will provide feasible routes to synthesize visible‐light responsive nanomaterials for efficient solar utilization.     

Elucidating the Sole Contribution from Electromagnetic Near‐Fields in Plasmon‐Enhanced Cu2O Photocathodes

Despite many promising reports of plasmon‐enhanced photocatalysis, the inability to identify the individual contributions from multiple enhancement mechanisms has delayed the development of general design rules for engineering efficient plasmonic photocatalysts. Herein, a plasmonic photocathode comprised of Au@SiO₂ (core@shell) nanoparticles embedded within a Cu₂O nanowire network is constructed to exclusively examine the contribution from one such mechanism: electromagnetic near‐field enhancement. The influence of the local electromagnetic field intensity is correlated with the overall light‐harvesting efficiency of the device through variation of the SiO₂ shell thickness (5–22 nm) to systematically tailor the distance between the plasmonic Au nanoparticles and the Cu₂O nanowires. A threefold increase in device photocurrent is achieved upon integrating the Au@SiO₂ nanoparticles into the Cu₂O nanowire network, further enabling a 40% reduction in semiconductor film thickness while maintaining photocathode performance. Photoelectrochemical results are further correlated with photoluminescence studies and optical simulations to confirm that the near‐field enhancement is the sole mechanism responsible for increased light absorption in the plasmonic photocathode.     

Enhancing Mo:BiVO4 Solar Water Splitting with Patterned Au Nanospheres by Plasmon‐Induced Energy Transfer

Plasmonic metal nanostructures have been extensively investigated to improve the performance of metal oxide photoanodes for photoelectrochemical (PEC) solar water splitting cells. Most of these studies have focused on the effects of those metal nanostructures on enhancing light absorption and enabling direct energy transfer via hot electrons. However, several recent studies have shown that plasmonic metal nanostructures can improve the PEC performance of metal oxide photoanodes via another mechanism known as plasmon‐induced resonant energy transfer (PIRET). However, this PIRET effect has not yet been tested for the molybdenum‐doped bismuth vanadium oxide (Mo:BiVO₄), regarded as one of the best metal oxide photoanode candidates. Here, this study constructs a hybrid Au nanosphere/Mo:BiVO₄ photoanode interwoven in a hexagonal pattern to investigate the PIRET effect on the PEC performance of Mo:BiVO₄. This study finds that the Au nanosphere array not only increases light absorption of the photoanode as expected, but also improves both its charge transport and charge transfer efficiencies via PIRET, as confirmed by time‐correlated single photon counting and transient absorption studies. As a result, incorporating the Au nanosphere array increases the photocurrent density of Mo:BiVO₄ at 1.23 V versus RHE by ≈2.2‐fold (2.83 mA cm^?2).     

Single‐Crystalline Nanomesh Tantalum Nitride Photocatalyst with Improved Hydrogen‐Evolving Performance

Tantalum nitride (Ta₃N₅) with a suitable bandgap (≈2 eV) is regarded as one of the most promising photocatalysts for efficient solar energy harvesting and conversion. However, Ta₃N₅ suffers from low hydrogen production activity due to the low carrier mobility and fast carrier recombination. Thus, the design of Ta₃N₅ nanostructures to facilitate charge carrier transport and improve photocatalytic performance remains a challenge. This study reports a new type of ultrathin (≈2 nm) Ta₃N₅ nanomesh with high specific surface area (284.6 m² g^?1) and excellent crystallinity by an innovative bottom‐up graphene oxide templated strategy. The resulting Ta₃N₅ nanomeshes demonstrate drastically improved electron transport ability and prolonged lifetime of charge carriers, due to the nature of high surface area and excellent crystallinity. As a result, when used as photocatalysts, the Ta₃N₅ nanomeshes exhibit a greater than tenfold improvement in solar hydrogen production compared to bulk counterparts. This work provides an effective and generic strategy for designing 2D ultrathin nanomesh structures for nonlayered materials with improved catalytic activity.     

Surface-Assisted Carrier Excitation in Plasmonic Nanostructures

We present a quantum-mechanical model for surface-assisted carrier excitation by optical fields in plasmonic nanostructures of arbitrary shape. We derive an explicit expression, in terms of local fields inside the metal structure, for surface absorbed power and surface scattering rate that determine the enhancement of carrier excitation efficiency near the metal-dielectric interface. We show that surface scattering is highly sensitive to the local field polarization and can be incorporated into metal-dielectric function along with phonon and impurity scattering. We also show that the obtained surface scattering rate describes surface-assisted plasmon decay (Landau damping) in nanostructures larger than the nonlocality scale. Our model can be used for calculations of plasmon-assisted hot carrier generation rates in photovoltaics and photochemistry applications.     

Triangular Au�CAg Nanoframes with Tunable Surface Plasmon Resonance Signal from Visible to Near-Infrared Region

In recent years, metal hollow nanostructures are intriguing to be synthesized and studied because they exhibit unique surface plasmonic properties. Although many methods for tuning the surface plasmonic absorption peaks of silver nanostructures have been reported, it still remains a great challenge to produce hollow Ag nanostructure with controllable surface plasmon resonance (SPR) via a facile method. In this paper, triangular Au–Ag nanoframes were successfully fabricated using triangular silver nanoplates as templates, through galvanic replacement reaction between the silver nanoplates and HAuCl₄, exhibiting tuneable SPR response from visible (605 nm) to near-infrared region (1,235 nm).     

Dramatic Enhancement of CO2 Photoreduction by Biodegradable Light‐Management Paper

Photocatalytic reduction of CO₂ with H₂O vapor is gaining increased interest because it is a promising “green chemistry” route for the direct conversion of CO₂ to value‐added chemicals driven by solar energy. To increase the efficiency of photocatalytic conversion, most efforts are made by exploring various photocatalysts while little effort on advanced light management. For the first time, it is demonstrated that bio‐degradable transparent paper with excellent light diffusivity can effectively enhance the light utilization of photocatalytic reactions when attached on the device surface, and thus greatly increase the conversion efficiency. As a proof‐of‐concept, a graphitic carbon nitride (g‐C₃N₄) photocatalyst with transparent paper attached, exhibited 1.5 times higher photocatalytic activity than bare g‐C₃N₄ in the reduction of CO₂ under visible light irradiation. The improved catalytic performance can be ascribed to the (1) refractive index matching and (2) enhanced light absorption via prolonged light traveling path in transparent paper, which decreases the light reflection at surface and traps the absorbed light inside, leading to an increased light absorption at the active layer of the device. The transparent paper with a controllable light management behavior has an unprecedented potential for applications in photocatalysis as a general method for improved light utilization.     

Efficient Plasmonic Au/CdSe Nanodumbbell for Photoelectrochemical Hydrogen Generation beyond Visible Region

In this communication, light harvesting and photoelectrochemical (PEC) hydrogen generation beyond the visible region are realized by an anisotropic plasmonic metal/semiconductor hybrid photocatalyst with precise control of their topology and heterointerface. Controlling the intended configuration of the photocatalytic semiconductor to anisotropic Au nanorods' plasmonic hot spots, through a water phase cation exchange strategy, the site‐selective overgrowth of a CdSe shell evolving from a core/shell to a nanodumbbell is realized successfully. Using this strategy, tip‐preferred efficient photoinduced electron/hole separation and plasmon enhancement can be realized. Thus, the PEC hydrogen generation activity of the Au/CdSe nanodumbbell is 45.29 µmol cm^?2 h^?1 (nearly 4 times than the core/shell structure) beyond vis (λ > 700 nm) illumination and exhibits a high faradic efficiency of 96% and excellent stability with a constant photocurrent for 5 days. Using surface photovoltage microscopy, it is further demonstrated that the efficient plasmonic hot charge spatial separation, which hot electrons can inject into CdSe semiconductors, leads to excellent performance in the Au/CdSe nanodumbbell.     

Tunable Multi-Port Surface Plasmon Polariton Excitation with Nanostructures

Surface plasmon polaritons (SPPs) have appealing features such as tighter spatial confinement and higher local field intensity. Manipulation of surface plasmon polaritons on metal/dielectric interface is an important aspect in the achievement of integrated plasmonic circuit beyond the diffraction limit. Here, we introduce a design of pin cushion structure and a holographic groove pattern structure for tunable multi-port SPPs excitation and focusing. Free space light is coupled into SPPs through momentum matching conditions. Both nanostructures are capable of tunably controlling of SPPs depending on the incident polarizations, while the holographic method provides more flexibility of wavelength-dependent excitations. Furthermore, a quantitative method is applied to calculate the efficiencies of excitation for both nanostructures under different conditions, including radially polarized incident beams. These results can work as a guidance and be helpful to further choice of the suitable design strategies for variable plasmonic applications such as beam splitter, on-chip spectroscopy, and plasmonic detectors.     

Exceptional Visible‐Light‐Driven Cocatalyst‐Free Photocatalytic Activity of g‐C3N4 by Well Designed Nanocomposites with Plasmonic Au and SnO2

In this work, plasmonic Au/SnO₂/g‐C₃N₄ (Au/SO/CN) nanocomposites have been successfully synthesized and applied in the H₂ evolution as photocatalysts, which exhibit superior photocatalytic activities and favorable stability without any cocatalyst under visible‐light irradiation. The amount‐optimized 2Au/6SO/CN nanocomposite capable of producing approximately 770 μmol g^?1 h^?1 H₂ gas under λ > 400 nm light illumination far surpasses the H₂ gas output of SO/CN (130 μmol g^?1), Au/CN (112 μmol g^?1 h^?1), and CN (11 μmol g^?1 h^?1) as a contrast. In addition, the photocatalytic activity of 2Au/6SO/CN maintains unchanged for 5 runs in 5 h. The enhanced photoactivity for H₂ evolution is attributed to the prominently promoted photogenerated charge separation via the excited electron transfer from plasmonic Au (≈520 nm) and CN (470 nm > λ > 400 nm) to SO, as indicated by the surface photovoltage spectra, photoelectrochemical I–V curves, electrochemical impedance spectra, examination of formed hydroxyl radicals, and photocurrent action spectra. Moreover, the Kelvin probe test indicates that the newly aligned conduction band of SO in the fabricated 2Au/6SO/CN is indispensable to assist developing a proper energy platform for the photocatalytic H₂ evolution. This work distinctly provides a feasible strategy to synthesize highly efficient plasmonic‐assisted CN‐based photocatalysts utilized for solar fuel production.     

Full‐Spectrum Liquid‐Junction Quantum Dot–Sensitized Solar Cells by Integrating Surface Plasmon–Enhanced Electrocatalysis

Full‐spectrum solar energy utilization is the ultimate goal of high‐performance photovoltaic devices. However, the present approaches to enhance sunlight harvesting in the cost‐effective quantum dot–sensitized solar cells mainly focus on the use of high‐frequency photons with the long‐wavelength sunlight being left behind. Here, a full‐spectrum solar cell architecture is proposed and the near‐infrared light–enhanced cell performance is demonstrated with a plasmonic and electrocatalytic dual‐function CuS nanostructure electrode. In the CdS/CdSe quantum dot–sensitized solar cells, an enhancement factor as high as 15% in power conversion efficiency is obtained for the device with near‐infrared part of 1‐sun light irradiating from the counter electrode side and ultraviolet–visible part incidence from the photoanode side. Electrochemical characterizations show that the enhanced electrocatalytic activity toward polysulfide reduction is attributed to the better device performance. This may be due to the plasmon‐induced photothermal effect and interfacial energy transfer from the counter electrode under the near‐infrared light, which accelerate the preceding chemical reactions for polysulfide reduction and improve the charge transfer at the electrode–electrolyte interface. This strategy provides an alternative way to achieve a full‐spectrum liquid‐junction solar cell via the integration of plasmon‐enhanced electrocatalysis into photovoltaics.     

Degradation of reactive dyes in a photocatalytic circulating-bed biofilm reactor

Decolorization and mineralization of reactive dyes by intimately coupled TiO₂‐photocatalysis and biodegradation (ICPB) on a novel TiO₂‐coated biofilm carrier were investigated in a photocatalytic circulating‐bed biofilm reactor (PCBBR). Two typical reactive dyes—Reactive Black 5 (RB5) and Reactive Yellow 86 (RY86)—showed similar first‐order kinetics when being photocatalytically decolorized at low pH (～4–5) in batch experiments. Photocatalytic decolorization was inhibited at neutral pH in the presence of phosphate or carbonate buffer, presumably due to electrostatic repulsion from negatively charged surface sites on TiO₂, radical scavenging by phosphate or carbonate, or both. Therefore, continuous PCBBR experiments were carried out at a low pH (～4.5) to maintain high photocatalytic efficiency. In the PCBBR, photocatalysis alone with TiO₂‐coated carriers could remove target compound RB5 and COD by 97% and 47%, respectively. Addition of biofilm inside macroporous carriers maintained a similar RB5 removal efficiency, but COD removal increased to 65%, which is evidence of ICPB despite the low pH. ICPB was further proven by finding microorganisms inside carriers at the end of the PCBBR experiments. A proposed ICPB pathway for RB5 suggests that a major intermediate, a naphthol derivative, was responsible for most of the residual COD, while most of the nitrogen in the azo‐bonds (? N?N? ) was oxidized to N₂. Biotechnol. Bioeng. 2012; 109:884–893. © 2011 Wiley Periodicals, Inc.     

Graphene‐Tailored Thermodynamics and Kinetics to Fabricate Metal Borohydride Nanoparticles with High Purity and Enhanced Reversibility

Due to their ultrahigh theoretical capacity, metal borohydrides are considered to be one of the most promising candidate hydrogen storage materials. Their application still suffers, however, from high operating temperature, sluggish kinetics, and poor reversibility. Designing nanostructures is an effective way of addressing these issues, but seeking suitable approaches remains a big challenge. Here, a space‐confined solid‐gas reaction to synthesize Mg(BH₄)₂ nanoparticles supported on grapheme is reported, which serves as the structural support for the dispersed Mg(BH₄)₂ nanoparticles. More notably, density functional theory calculations reveal that graphene could weaken both the Mg? H bonds of MgH₂ and B? B bonds of B₂H₆, which could thermodynamically and kinetically facilitate the chemical transformation to synthesize Mg(BH₄)₂ with high purity. Because of the synergistic effects of both the significant reduction in particle size and the catalytic effect of graphene, an onset dehydrogenation temperature of ≈154 °C is observed for Mg(BH₄)₂ nanoparticles, and a complete dehydrogenation could be achieved at a temperature as low as 225 °C, with the formation of MgB₂ as the by‐product. This work provides a new perspective to tailoring the thermodynamics and kinetics of chemical reactions toward the favorable synthesis of functional inorganic materials.     

Photocatalytic Reduction of CO2 into Methanol over Ag/TiO2 Nanocomposites Enhanced by Surface Plasmon Resonance

Ag-loaded TiO₂ (Ag/TiO₂) nanocomposites were prepared by microwave-assisted chemical reduction method using tetrabutyl titanate as the Ti source. The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption–desorption isotherms, UV–vis absorption spectrum, X-ray photoelectron spectrum, photoluminescence spectrum, and Raman scattering spectrum, respectively. Results revealed that Ag nanoparticles (NPs) were successfully deposited on TiO₂ by reduction of Ag⁺, and the visible light absorption and Raman scattering of TiO₂ were enhanced by Ag NPs based on its surface plasmon resonance effect. Besides, Ag NPs could also effectively restrain the recombination of photogenerated electrons and holes with a longer luminescence life time. In addition, photocatalytic reduction of CO₂ with H₂O on the composites was conducted to obtain methanol. Experimental results indicated that Ag-loaded TiO₂ had better photocatalytic activity than pure TiO₂ due to the synergistic effect between UV light excitation and surface plasmon resonance enhancement, and 2.5 % Ag/TiO₂ exhibited the best activity; the corresponding energy efficiency was about 0.5 % and methanol yield was 405.2 μmol/g-cat, which was 9.4 times higher than that of pure TiO₂. Additionally, an excitation enhancement synergistic mechanism was proposed to explain the experimental results of photocatalytic reduction of CO₂ under different reaction conditions.     

Optothermally Controlled Charge Transfer Plasmons in Au-Ge<Subscript>2</Subscript>Sb<Subscript>2</Subscript>Te<Subscript>5</Subscript> Core-Shell Dimers

Functional and reversible plasmonic resonances across the visible and near-infrared spectrum have opened new avenues for developing advanced next-generation nanophotonic devices. In this study, by using optothermally controlled phase-change material (PCM) for plasmonic nanostructures, we successfully induced highly tunable charge transfer plasmon (CTP) resonance modes. To this end, we have chosen a two-member dimer assembly consisting of gold cores and Ge₂Sb₂Te₅ (GST) shells in distant, touching, and overlapping regimes. We show that switching between amorphous (dielectric) and crystalline (conductive) phases of GST allows for achieving tunable dipolar and CTP resonances and enables an effective interplay between these modes along the near-infrared spectrum. By analyzing electromagnetically calculated spectral responses for the dimer antenna in tunneling and direct charge transfer regimes, we confirmed that the induced CTPs in touching and overlapping regimes are highly controllable and pronounced in comparison to the quantum tunneling regime. We also use the precise, fast, and controllable switching between dipolar and CTP resonant modes to develop a telecommunication switch based on a simple metallodielectric dimer. The proposed structures can help designing optothermally controlled devices without morphological variations in the geometry of the design, and having strong potential for advanced plasmon modulation and fast data routing.     

Plasmonic and Energy Studies of Ag Nanoparticles in Silica-Titania Hosts

The present work reports an investigation of surface plasmon resonance (SPR) of silver nanoparticles in SiO₂–TiO₂ hosts. The surface plasmon resonance of silver nanoparticles was observed in the wavelength range 300–400 nm. Numerical calculation of SPR of silver nanoparticles with spherical morphology was done on the basis of discrete dipole approximation (DDA) method. The observed fluorescence spectrum fits well with the theoretically calculated one. The luminescence enhancement is attributed to the strong local electric field which increases the exciting and emitting photons coupled to SPR. An effort has been made to study the surface plasmon mediated excitation energy transfer (EET) between two spherical metal nanoparticles. The van der Waals (vdW) energy between plasmonic silver nanoparticles in the present hosts has been estimated.     

Photocatalytic Water Splitting for Solar Hydrogen Production Using the Carbonate Effect and the Z‐Scheme Reaction

The development of innovative technologies for solar energy conversion and storage is important for solving the global warming problem and for establishing a sustainable society. The photocatalytic water‐splitting reaction using semiconductor powders has been intensively studied as a promising technology for direct and simple solar energy conversion. However, the evolution of H₂ and O₂ gases in a stoichiometric ratio (H₂/O₂ = 2) is very difficult owing to various issues, such as an unfavorable backward reaction and mismatched band potentials. Two important findings have widened the variety of photocatalysts available for stoichiometric water‐splitting, viz. the carbonate anion effect and the Z‐scheme photocatalytic reaction using a redox mediator. The bicarbonate anion has been found to act as a redox catalyst via preferential peroxide formation and subsequent decomposition to O₂. As the Z‐scheme reaction using a redox mediator mitigates band potential mismatches, it is widely applicable for various visible‐light‐active photocatalysts. This review describes the development of photocatalytic water‐splitting for solar hydrogen production using the carbonate anion effect and the Z‐scheme reaction. Moreover, recent developments in photocatalysis–electrolysis hybrid systems, an advanced Z‐scheme reaction concept, are also reviewed for practical and economical hydrogen production.     

Functionalization of nanostructured gold substrates with chiral chromophores for SERS applications: The case of 5‐Aza[5]helicene

Nanostructured gold thin films can be fabricated by controlled pulsed laser deposition to get efficient sensors, with uniform morphology and optimized plasmon resonance, to be employed as plasmonic substrates in surface enhanced Raman scattering spectroscopy. By attaching 5‐aza[5]helicen‐6‐yl‐6‐hexanethiol to such gold nanostructures, used in a previous work for label‐free drug sensing with biomedical purposes, we successfully prepared functionalized substrates with remarkable surface enhanced Raman scattering activity. The long‐term motivation is to develop probes for drug detection at low concentrations, where sensitivity to specific chiral targets is required.