Drastic Layer‐Number‐Dependent Activity Enhancement in Photocatalytic H2 Evolution over nMoS2/CdS (n ≥ 1) Under Visible Light

Exploiting noble‐metal‐free cocatalysts is of huge interest for photocatalytic water splitting using solar energy. As an efficient cocatalyst in photocatalysis, MoS₂ is shown promise as a low‐cost alternative to Pt for hydrogen evolution. Here we report a systematical study on controlled synthesis of MoS₂ with layer number ranging from ≈1 to 112 and their activities for photocatalytic H₂ evolution over commercial CdS. A drastic increase in photocatalytic H₂ evolution is observed with decreasing MoS₂ layer number. Particularly for the single‐layer (SL) MoS₂, the SL‐MoS₂/CdS sample reaches a high H₂ generation rate of ≈2.01 × 10^?3m h^?1 in Na₂S–Na₂SO₃ solutions and ≈2.59 × 10^?3m h^?1 in lactic acid solutions, corresponding to an apparent quantum efficiency of 30.2% and 38.4% at 420 nm, respectively. In addition to the more exposed edges and unsaturated active S atoms, valence band–XPS and Mott–Schottky plots analysis indicate that the SL MoS₂ has the more negative conduction band energy level than the H⁺/H₂ potential, facilitating the hydrogen reduction.     

Superb Alkaline Hydrogen Evolution and Simultaneous Electricity Generation by Pt‐Decorated Ni3N Nanosheets

The development of efficient hydrogen evolution reaction electrocatalysts is critical to the realization of clean hydrogen fuel production, while the sluggish kinetics of the Volmer‐step substantially restricts the catalyst performances in alkali electrolyzers, even for noble metal catalysts such as Pt. Here, a Pt‐decorated Ni₃N nanosheet electrocatalyst is developed to achieve a top performance of hydrogen evolution in alkaline conditions. Possessing a high metallic conductivity and an atomic‐thin semiconducting hydroxide surface, the Ni₃N nanosheets serve as not only an efficient electron pathway without the hindrance of Schottky barriers, but also provide abundant active sites for water dissociation and generation of hydrogen intermediates, which are further adsorbed on the Pt surface to recombine to H₂. The Pt‐decorated Ni₃N nanosheet catalyst exhibits a hydrogen evolution current density of 200 mA cm^?2 at an overpotential of 160 mV versus reversible hydrogen electrode, a Tafel slope of ≈36.5 mV dec^?1, and excellent stability of 82.5% current retention after 24 h of operation. Moreover, a hybrid cell consisting of a Pt‐decorated Ni₃N nanosheet cathode and a Li‐metal anode is assembled to achieve simultaneous hydrogen evolution and electricity generation, exhibiting >60 h long‐term hydrogen evolution reaction stability and an output voltage ranging from 1.3 to 2.2 V.     

A Delaminated Defect‐Rich ZrO2 Hierarchical Nanowire Photocathode for Efficient Photoelectrochemical Hydrogen Evolution

An efficient way to combat the energy crisis and the greenhouse gas effect of fossil fuels is the production of hydrogen fuel from solar‐driven water splitting reaction. Here, this study presents a p‐type ZrO₂ nanoplate‐decorated ZrO₂ nanowire photocathode with a high photoconversion efficiency that makes it potentially viable for commercial solar H₂ production. The composition of oxygen vacancy defects, low charge carrier transport property, and high specific surface area of these as‐grown hierarchical nanowires are further improved by an hydrofluoric acid (HF) treatment, which causes partial delamination and produces a thin amorphous ZrO₂ layer on the surface of the as‐grown nanostructured film. The presence of different types of oxygen vacancies (neutral, singly charged, and doubly charged defects) and their compositional correlation to the Zr^x+ oxidation states (4 > x > 2) are found to affect the charge transfer process, the p‐type conductivity, and the photocatalytic activity of the ZrO₂ nanostructured film. The resulting photocathode provides the highest overall photocurrent (?42.3 mA cm^?2 at 0 V vs reversible hydrogen electrode (RHE)) among all the photocathodes reported to date, and an outstanding 3.1% half‐cell solar‐to‐hydrogen conversion efficiency with a Faradaic efficiency of 97.8%. Even more remarkable is that the majority of the photocurrent (69%) is produced in the visible light region.     

2D Metal Organic Framework Nanosheet: A Universal Platform Promoting Highly Efficient Visible‐Light‐Induced Hydrogen Production

2D metal organic frameworks (MOF) have received tremendous attention due to their organic–inorganic hybrid nature, large surface area, highly exposed active sites, and ultrathin thickness. However, the application of 2D MOF in light‐to‐hydrogen (H₂) conversion is rarely reported. Here, a novel 2D MOF [Ni(phen)(oba)]_n·0.5nH₂O (phen = 1,10‐phenanthroline, oba = 4,4′‐oxybis(benzoate)) is for the first time employed as a general, high‐performance, and earth‐abundant platform to support CdS or Zn_0.8Cd_0.2S for achieving tremendously improved visible‐light‐induced H₂‐production activity. Particularly, the CdS‐loaded 2D MOF exhibits an excellent H₂‐production activity of 45 201 µmol h^?1 g^?1, even exceeding that of Pt‐loaded CdS by 185%. Advanced characterizations, e.g., synchrotron‐based X‐ray absorption near edge structure, and theoretical calculations disclose that the interactive nature between 2D MOF and CdS, combined with the high surface area, abundant reactive centers, and favorable band structure of 2D MOFs, synergistically contribute to this distinguished photocatalytic performance. The work not only demonstrates that the earth‐abundant 2D MOF can serve as a versatile and effective platform supporting metal sulfides to boost their photocatalytic H₂‐production performance without noble‐metal co‐catalysts, but also paves avenues to the design and synthesis of 2D‐MOF‐based heterostructures for catalysis and electronics applications.     

Leaf‐Mosaic‐Inspired Vine‐Like Graphitic Carbon Nitride Showing High Light Absorption and Efficient Photocatalytic Hydrogen Evolution

Green plants use solar energy efficiently in nature. Simulating the exquisite structure of a natural photosynthesis system may open a new approach for the construction of desirable photocatalysts with high light harvesting efficiency and performance. Herein, inspired by the excellent light utilization of “leaf mosaic” in plants, a novel vine‐like g‐C₃N₄ (V‐CN) is synthesized for the first time by copolymerizing urea with dicyandiamide‐formaldehyde (DF) resin. The as‐prepared V‐CN exhibits ultrahigh photocatalytic hydrogen production of 13.6 mmol g^?1 h^?1 under visible light and an apparent quantum yield of 12.7% at 420 nm, which is ≈38 times higher than that of traditional g‐C₃N₄, representing one of the highest‐activity g‐C₃N₄‐based photocatalysts. This super photocatalytic performance is derived from the unique leaf mosaic structure of V‐CN, which effectively improves its light utilization and affords a larger specific surface area. In addition, the introduction of DF resin further optimizes the energy band of V‐CN, extends its light absorption, and improves its crystallinity and interfacial charge transport, resulting in high performance. It is an easy and green strategy for the preparation of broad‐spectrum, high‐performance g‐C₃N₄, which presents significant advancement for the design of other nanophotocatalysts by simulating the fine structure of natural photosynthesis.     

Efficient Photocatalytic Nitrogen Fixation over Cuδ+‐Modified Defective ZnAl‐Layered Double Hydroxide Nanosheets

The photocatalytic reduction of nitrogen (N₂) with water (H₂O) as the reducing agent holds great promise as a sustainable future technology for the synthesis of ammonia (NH₃). Herein, the effect of oxygen vacancies and electron‐rich Cu^δ+ on the performance of zinc‐aluminium layered double hydroxide (ZnAl‐LDH) nanosheet photocatalysts for N₂ reduction to NH₃ under UV–vis excitation is systematically explored. Results show that a 0.5%‐ZnAl‐LDH nanosheet photocatalyst (containing 0.5 mol% Cu by metal basis) affords a remarkable NH₃ production rate of 110 µmol g^?1 h^?1 and excellent stability in pure water. The X‐ray absorption spectroscopy, electron paramagnetic resonance, and density functional theory calculations reveal that Cu addition imparts oxygen vacancies and coordinatively unsaturated Cu^δ+ (δ < 2) with electron‐rich property in the ZnAl‐LDH nanosheets, both of which readily contribute to efficient separation and transfer of photogenerated electrons and holes and promote N₂ adsorption, thereby both activating N₂ and facilitating its multielectrons reduction to NH₃.     

Urea‐Modified Carbon Nitrides: Enhancing Photocatalytic Hydrogen Evolution by Rational Defect Engineering

The primary amine groups on the heptazine‐based polymer melon, also known as graphitic carbon nitride (g‐C₃N₄), can be replaced by urea groups using a two‐step postsynthetic functionalization. Under simulated sunlight and optimum Pt loading, this urea‐functionalized carbon nitride has one of the highest activities among organic and polymeric photocatalysts for hydrogen evolution with methanol as sacrificial donor, reaching an apparent quantum efficiency of 18% and nearly 30 times the hydrogen evolution rate compared to the nonfunctionalized counterpart. In the absence of Pt, the urea‐derivatized material evolves hydrogen at a rate over four times that of the nonfunctionalized one. Since “defects” are conventionally accepted to be the active sites in graphitic carbon nitride for photocatalysis, the work here is a demonstrated example of “defect engineering,” where the catalytically relevant defect is inserted rationally for improving the intrinsic, rather than extrinsic, photocatalytic performance. Furthermore, the work provides a retrodictive explanation for the general observation that g‐C₃N₄ prepared from urea performs better than those prepared from dicyandiamide and melamine. In‐depth analyses of the spent photocatalysts and computational modeling suggest that inserting the urea group causes a metal‐support interaction with the Pt cocatalyst, thus facilitating interfacial charge transfer to the hydrogen evolving centers.     

Nitrogen‐Doped Carbon‐Coated CuO‐In2O3 p–n Heterojunction for Remarkable Photocatalytic Hydrogen Evolution

CuO as a catalyst has shown promising application prospects in photocatalytic splitting of water into hydrogen (H₂). However, the instability of CuO in amine aqueous solution limits the applications of CuO‐based photocatalysts in the photocatalytic H₂ evolution. In this work, a novel dodecahedral nitrogen (N)‐doped carbon (C) coated CuO‐In₂O₃ p–n heterojunction (DNCPH) is designed and synthesized by directly pyrolyzing benzimidazole‐modified dodecahedral Cu/In‐based metal‐organic frameworks, showing long‐term stability in triethanolamine (TEOA) aqueous solution and excellent photocatalytic H₂ production efficiency. The improved stability of DNCPH in TEOA solution is ascribed to the alleviation of electron deficiency in CuO by forming the p–n heterojunction and the protection with coated N‐doped C layer. Based on detailed theoretical calculations and experimental studies, it is found that the improved separation efficiency of photogenerated electron/hole pairs and the mediated adsorption behavior (|?G_H*|→0) by coupling N‐doped C layer with CuO‐In₂O₃ p–n heterojunction lead to the excellent photocatalytic H₂ production efficiency of DNCPH. This work provides a feasible strategy for effectively applying CuO‐based photocatalysts in photocatalytic H₂ production.     

Synthesis of Large Surface‐Area g‐C3N4 Comodified with MnOx and Au‐TiO2 as Efficient Visible‐Light Photocatalysts for Fuel Production

Herein, this study successfully fabricates porous g‐C₃N₄‐based nanocomposites by decorating sheet‐like nanostructured MnO_x and subsequently coupling Au‐modified nanocrystalline TiO₂. It is clearly demonstrated that the as‐prepared amount‐optimized nanocomposite exhibits exceptional visible‐light photocatalytic activities for CO₂ conversion to CH₄ and for H₂ evolution, respectively by ≈28‐time (140 µmol g^?1 h^?1) and ≈31‐time (313 µmol g^?1 h^?1) enhancement compared to the widely accepted outstanding g‐C₃N₄ prepared with urea as the raw material, along with the calculated quantum efficiencies of ≈4.92% and 2.78% at 420 nm wavelength. It is confirmed mainly based on the steady‐state surface photovoltage spectra, transient‐state surface photovoltage responses, fluorescence spectra related to the produced ?OH amount, and electrochemical reduction curves that the exceptional photoactivities are comprehensively attributed to the large surface area (85.5 m² g^?1) due to the porous structure, to the greatly enhanced charge separation and to the introduced catalytic functions to the carrier‐related redox reactions by decorating MnO_x and coupling Au‐TiO₂, respectively, to modulate holes and electrons. Moreover, it is suggested mainly based on the photocatalytic experiments of CO₂ reduction with isotope ¹³CO₂ and D₂O that the produced ?CO₂ and ?H as active radicals would be dominant to initiate the conversion of CO₂ to CH₄.     

Co–Ni‐Based Nanotubes/Nanosheets as Efficient Water Splitting Electrocatalysts

One promising approach to hydrogen energy utilization from full water splitting relies on the successful development of earth‐abundant, efficient, and stable electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Here, homologous Co–Ni‐based nanotube/nanosheet structures with tunable Co/Ni ratios, including hydroxides and nitrides, are grown on conductive substrates by a cation‐exchanging method to grow hydroxides, followed by anion exchanging to obtain corresponding nitrides. These hydroxide OER catalysts and nitride HER catalysts exhibit low overpotentials, small Tafel slopes, and high current densities, which are attributed to their large electrochemically reactive surface, 1D morphologies for charge conduction, and octahedral coordination states of metal ions for efficient catalytic activities. The homologous Co–Ni‐based nanotube hydroxides and nitrides suggest promising electrocatalysts for full water splitting with high efficiency, good stability, convenient fabrication, and low cost.     

Light‐Driven BiVO4–C Fuel Cell with Simultaneous Production of H2O2

Photoelectrochemical (PEC) systems have been researched for decades due to their great promise to convert sunlight to fuels. The majority of the research on PEC has been using light to split water to hydrogen and oxygen, and its performance is limited by the need of additional bias. Another research direction on PEC using light, is to decompose organic materials while producing electricity. In this work, the authors report a new type of unassisted PEC system that uses light, water and oxygen to simultaneously produce electricity and hydrogen peroxide (H₂O₂) on both the photoanode and cathode, which is essentially a light‐driven fuel cell with H₂O₂ as the main product at the two electrodes, meanwhile achieving a maximum power density of 0.194 mW cm^‐2, an open circuit voltage of 0.61 V, and a short circuit current density of 1.09 mA cm^‐2. The electricity output can be further used as a sign for cell function when accompanied by a detector such as a light‐emitting diode (LED) light or a multimeter. This is the first work that shows H₂O₂ two‐side generation with a strict key factors study of the system, with a clear demonstration of electricity output ability using low‐cost earth abundant materials on both sides, which represents an exciting new direction for PEC systems.     

Implanting Isolated Ru Atoms into Edge‐Rich Carbon Matrix for Efficient Electrocatalytic Hydrogen Evolution

Although the maximized dispersion of metal atoms has been realized in the single‐atom catalysts, further improving the intrinsic activity of the catalysts is of vital importance. Here, the decoration of isolated Ru atoms into an edge‐rich carbon matrix is reported for the electrocatalytic hydrogen evolution reaction. The developed catalyst displays high catalytic performance with low overpotentials of 63 and 102 mV for achieving the current densities of 10 and 50 mA cm^?2, respectively. Its mass activity is about 9.6 times higher than that of the commercial Pt/C‐20% catalyst at an overpotential of 100 mV. Experimental results and density functional theory calculations suggest that the edges in the carbon matrix enhance the local electric field at the Ru site and accelerate the reaction kinetics for the hydrogen evolution. The present work may provide insights into electrocatalytic behavior and guide the design of advanced electrocatalysts.     

Tailor‐Made Photoconductive Pyrene‐Based Covalent Organic Frameworks for Visible‐Light Driven Hydrogen Generation

Covalent organic frameworks (COFs) have emerged as a new class of crystalline porous polymers displaying molecular tunability combined with structural definition. Here, a series of three conjugated, photoactive azine‐linked COFs based on pyrene building blocks which differ in the number of nitrogen atoms in the peripheral aromatic units is presented. The structure of the COFs is analyzed by combined experimental and computational physisorption as well as quantum‐chemical calculations, which suggest a slipped‐stacked arrangement of the 2D layers. Photocurrents of up to 6 µA cm^?2 with subsecond photoresponse times are measured on thin film samples for the first time. While all COFs are capable of producing hydrogen from water, their efficiency increases significantly with decreasing number of nitrogen atoms. The trending activities are rationalized by photoelectrochemical measurements and quantum‐chemical calculations which suggest an increase in the thermodynamic driving force with decreasing nitrogen content to be the origin of the observed differences in hydrogen evolution activities.     

Poly(1,4‐di(2‐thienyl))benzene Facilitating Complete Light‐Driven Water Splitting under Visible Light at High pH

The recent discovery that metal‐free polyterthiophene (PTTh) prepared by iodine‐vapor‐assisted polymerization (IVP) can catalyze the hydrogen evolution reaction (HER) when illuminated, and this light‐enhanced electrolysis expresses a non‐Nernstian relation with pH, provides the foundation for further improvement of the photovoltage of the reaction by engineering the band structure of the light‐absorbing polymer. Deviating from an all‐thiophene backbone, using poly(1,4‐di(2‐thienyl))benzene (PDTB) lowers the highest occupied molecular orbital level by ≈0.3 eV compared with polythiophene, and PDTB simultaneously maintains the photoelectrocatalytic properties without an all‐thiophene backbone, resulting in very high conversion rate of 600 mmol(H₂) h^?1 g^?1 at 0 V versus the reversible hydrogen electrode (RHE) at pH 11. PDTB shows the same non‐Nernstian behavior as PTTh with increasing onset potential (versus RHE) at higher pH, and the open circuit potential on PDTB under visible light reaches 1.4 V versus RHE at pH 12. The PDTB photocathode thus produces a photovoltage above the theoretical potential for the complete water‐splitting (1.229 V) and is indeed able to produce hydrogen in a one‐photon‐per‐electron light‐driven water splitting setup with MnO_x as the anode at a rate of 6.4 mmol h^?1 g_PDTB^?1.