NiCo2S4 Nanosheets Grown on Nitrogen‐Doped Carbon Foams as an Advanced Electrode for Supercapacitors

To push the energy density limit of supercapacitors, a new class of electrode materials with favorable architectures is strongly needed. Binary metal sulfides hold great promise as an electrode material for high‐performance energy storage devices because they offer higher electrochemical activity and higher capacity than mono‐metal sulfides. Here, the rational design and fabrication of NiCo₂S₄ nanosheets supported on nitrogen‐doped carbon foams (NCF) is presented as a novel flexible electrode for supercapacitors. A facile two‐step method is developed for growth of NiCo₂S₄ nanosheets on NCF with robust adhesion, involving the growth of Ni‐Co precursor and subsequent conversion into NiCo₂S₄ nanosheets through sulfidation process. Benefiting from the compositional features and 3D electrode architectures, the NiCo₂S₄/NCF electrode exhibits greatly improved electrochemical performance with ultrahigh capacitance (877 F g^?1 at 20 A g^?1) and excellent cycling stability. Moreover, a binder‐free asymmetric supercapacitor device is also fabricated by using NiCo₂S₄/NCF as the positive electrode and ordered mesoporous carbon (OMC)/NCF as the negative electrode; this demonstrates high energy density (≈45.5 Wh kg^?1 at 512 W kg^?1).     

Recent Progress in Biomass‐Derived Electrode Materials for High Volumetric Performance Supercapacitors

Tremendous efforts have been spent on the development of electrical energy storage (EES) systems with high volumetric performance in the past few years due to the evergrowing demand of miniaturized, portable electronic devices, and electric vehicles. Among all the EES devices, supercapacitors with electrode materials derived from biosources have attracted special attention due to their eco‐friendliness, natural abundance, their intrinsic porous structures as well as their renewable and sustainable features. However, the relatively low packing densities make their specific volumetric capacitance intrinsically low, which has largely limited their further application in the supercapacitors. To address these issues, various promising approaches ranging from structural manufacture to compositional design are applied and significant breakthroughs are witnessed in recent years. In this progress report, key factors influencing the volumetric performance of biomass‐derived electrode materials are systematically discussed with a particular focus spanning from fundamental to operational aspects. This work provides insights into the development of high‐volumetric‐performance biomass‐derived supercapacitors by comprehensively summarizing recent advances in the rational structural design and fabrication. Perspectives regarding the future challenges and promising research directions on the design of next‐generation EES devices are also provided.     

Rational Construction of Nitrogen‐Doped Hierarchical Dual‐Carbon for Advanced Potassium‐Ion Hybrid Capacitors

Potassium‐ion hybrid capacitors (PIHCs), elaborately integrate the advantages of high output power as well as long lifespan of supercapacitors and the high energy density of batteries, and exhibit great possibilities for the future generations of energy storage devices. The critical next step for future implementation lies in exploring a high‐rate battery‐type anode with an ultra‐stable structure to match the capacitor‐type cathode. Herein, a “dual‐carbon” is constructed, in which a three‐dimensional nitrogen‐doped microporous carbon polyhedron (NMCP) derived from metal‐organic frameworks is tightly wrapped by two‐dimensional reduced graphene oxide (NMCP@rGO). Benefiting from the synergistic effect of the inner NMCP and outer rGO, the NMCP@rGO exhibits a superior K‐ion storage capability with a high reversible capacity of 386 mAh g^?1 at 0.05 A g^?1 and ultra‐long cycle stability with a capacity of 151.4 mAh g^?1 after 6000 cycles at 5.0 A g^?1. As expected, the as‐assembled PIHCs with a working voltage as high as 4.2 V present a high energy/power density (63.6 Wh kg^?1 at 19 091 W kg^?1) and excellent capacity retention of 84.7% after 12 000 cycles. This rational construction of advanced PIHCs with excellent performance opens a new avenue for further application and development.     

High Volumetric Capacitance,Ultralong Life Supercapacitors Enabled by Waxberry‐Derived Hierarchical Porous Carbon Materials

Supercapacitors with fast charge/discharge rate and long cycling stability (>50 000 cycles) are attractive for energy storage and mobile power supply. In this paper, a facile strategy is developed to fabricate an Fe₂O₃/FeS‐decorated N, S‐codoped hierarchical porous carbon hybrid. Its microstructure and compositions can be readily controlled through adjusting the hydrothermal reaction between waxberry and iron sulfate. The constructed supercapacitors with the as‐prepared carbon materials from this reaction are able to exhibit outstanding capacitive performance with a superfast charge/discharge rate (<1 s), ultralong cycle life (>50 000 cycles, 80 A g⁻¹), ultrahigh volumetric capacitance (1320.4 F cm⁻³, 0.1 A g⁻¹), and high energy density (100.9 W h kg⁻¹, 221.9 W h L⁻¹). The outstanding performance makes it one of the best biomass‐derived supercapacitors. The superior capacitive behavior is likely to arise from the N and S codoping on the surface/edge/skeleton of the carbon microspheres and nanosheet composites coupled with the fast redox reaction of Fe₂O₃/FeS. Overall, this research presents a new avenue for developing the next generation of sustainable high‐performance energy storage device.     

A Layered‐Nanospace‐Confinement Strategy for the Synthesis of Two‐Dimensional Porous Carbon Nanosheets for High‐Rate Performance Supercapacitors

A general approach is developed for the synthesis of 2D porous carbon nanosheets (PCNS) from bio‐sources derived carbon precursors (gelatin) by an integrated procedure of intercalation, pyrolysis, and activation. Montmorillonite with layered nanospace is used as a nanotemplate or nanoreactor to confine and modulate the transformation of gelatin, further leading to the formation of 2D nanosheet‐shaped carbon materials. The as‐made 2D PCNS exhibits a significantly improved rate performance, with a high specific capacitance of 246 F g^?1 and capacitance retention of 82% at 100 A g^?1, being nearly twice that of microsized activated carbon particulates directly from gelatin (131 F g^?1, 44%). The shortened ion transport distance in the nanoscaled dimension and modulated porous structure is responsible for such an enhanced superior rate capability. More importantly, the present strategy can be extended to other bio‐sources to create 2D PCNS as electrode materials with high‐rate performance. This will also provide a potential strategy for configuring 2D nanostructured carbon electrode materials with a short ion transport distance for supercapacitors and other carbon‐related energy storage and conversion devices.     

Hierarchical Zn–Co–S Nanowires as Advanced Electrodes for All Solid State Asymmetric Supercapacitors

A facile two‐step strategy is developed to design the large‐scale synthesis of hierarchical, unique porous architecture of ternary metal hydroxide nanowires grown on porous 3D Ni foam and subsequent effective sulfurization. The hierarchical Zn–Co–S nanowires (NWs) arrays are directly employed as an electrode for supercapacitors application. The as‐synthesized Zn–Co–S NWs deliver an ultrahigh areal capacity of 0.9 mA h cm^?2 (specific capacity of 366.7 mA h g^?1) at a current density of 3 mA cm^?2, with an exceptional rate capability (≈227.6 mA h g^?1 at a very high current density of 40 mA cm^?2) and outstanding cycling stability (≈93.2% of capacity retention after 10 000 cycles). Most significantly, the assembled Zn–Co–S NWs//Fe₂O₃@reduced graphene oxide asymmetric supercapacitors with a wide operating potential window of ≈1.6 V yield an ultrahigh volumetric capacity of ≈1.98 mA h cm^?3 at a current density of 3 mA cm^?2, excellent energy density of ≈81.6 W h kg^?1 at a power density of ≈559.2 W kg^?1, and exceptional cycling performance (≈92.1% of capacity retention after 10 000 cycles). This general strategy provides an alternative to design the other ternary metal sulfides, making it facile, free‐standing, binder‐free, and cost‐effective ternary metal sulfide‐based electrodes for large‐scale applications in modern electronics.     

Nitrogen‐Doped Wrinkled Carbon Foils Derived from MOF Nanosheets for Superior Sodium Storage

Preparation of hierarchical carbon nanomaterials from metal?organicframeworks (MOFs) offers immense potential in the improvement of energy density, tunability, and stability of functional materials for energy storage and conversion. How interconnected nitrogen (N)‐doped wrinkled carbon foils derived from MOF nanosheets can serve as high‐performance sodium storage materials due to their multiscale porous structure is shown here. The novel N‐doped carbon nanomaterials are synthesized through the pyrolysis of 2D Mn‐based MOFs, which are produced through the assistance of monodentate ligands to enable the planar growth of MOFs. Subsequent acid etching creates hierarchical pores and channels to allow rapid ion transport. The resulting materials achieve high‐rate capability (165 and 150 mA h g^?1 at current densities of 8 and 10 A g^?1, respectively) and high stability (capacity retention 72.8% after 1000 cycling at 1.0 A g^?1), when they are used as anode in sodium‐ion capacitors.     

Highly Dispersed Cobalt Clusters in Nitrogen‐Doped Porous Carbon Enable Multiple Effects for High‐Performance Li–S Battery

The lithium–sulfur (Li–S) battery is considered a promising candidate for the next generation of energy storage system due to its high specific energy density and low cost of raw materials. However, the practical application of Li–S batteries is severely limited by several weaknesses such as the shuttle effect of polysulfides and the insulation of the electrochemical products of sulfur and Li₂S/Li₂S₂. Here, by doping nitrogen and integrating highly dispersed cobalt catalysts, a porous carbon nanocage derived from glucose adsorbed metal–organic framework is developed as the host for a sulfur cathode. This host structure combines the reported positive effects, including high conductivity, high sulfur loading, effective stress release, fast lithium‐ion kinetics, fast interface charge transport, fast redox of Li₂S_n, and strong physical/chemical absorption, achieving a long cycle life (86% of capacity retention at 1C within 500 cycles) and high rate performance (600 mAh g^?1 at 5C) for a Li–S battery. By combining experiments and density functional theoretical calculations, it is demonstrated that the well‐dispersed cobalt clusters play an important role in greatly improving the diffusion dynamics of lithium, and enhance the absorption and conversion capability of polysulfides in the host structure.     

Fullerene‐Based In Situ Doping of N and Fe into a 3D Cross‐Like Hierarchical Carbon Composite for High‐Performance Supercapacitors

Fullerene‐based carbons are promising electrode materials for supercapacitors due to their unique carbon structures and tunable architectures at the molecular level. By introducing various functional groups with many elements on the fullerene cages, diverse in situ metal/nonmetal‐doped carbon materials with enhanced pseudocapacitances and/or double layer capacitances can be prepared. In the present work, a fullerene derivative, ferrocenylpyrrolidine C₆₀, containing nitrogen and iron, is chosen as the only precursor. A unique microstructure is fabricated by a liquid–liquid interfacial precipitation process. Subsequently, a facile, one‐step annealing of the microstructure at different temperatures is performed. A series of in situ N and Fe‐codoped laminated 3D hierarchical carbon composites in the shape of a cross are successfully synthesized. The as‐prepared N and Fe‐codoped carbon material treated at 700 °C exhibits a high specific capacitance of 505.4 F g^?1 at 0.1 A g^?1. To the best knowledge, this is the highest supercapacitor capacitance based on fullerene electrode materials. The use of a fullerene derivative as an in‐situ doped carbon for applications in energy storage opens a new avenue for developing future synthetic strategies to extend the repertoire of electrode materials with high performance.     

Regulating Pore Structure of Hierarchical Porous Waste Cork‐Derived Hard Carbon Anode for Enhanced Na Storage Performance

Porous structure design is generally considered to be a reliable strategy to boost ion transport and provide active sites for disordered carbon anodes of Na‐ion batteries (NIBs). Herein, a type of waste cork‐derived hard carbon material (CC) is reported for efficient Na storage via tuning the pore species. Benefiting from the natural holey texture of this renewable precursor, CCs deliver a novel hierarchical porous structure. The effective skeletal density test combined with small angle X‐ray scattering analysis (SAXS) is used to obtain the closed pore information. Based on a detailed correlation analysis between pore information and the electrochemical performance of CCs, improving pyrolysis temperature to reduce open pores (related to initial capacity loss) and increase closed pores (related to plateau capacity) endows an optimal CC with a high specific capacity of ≈360 mAh g^?1 in half‐cells and a high energy density of 230 Wh kg^?1 in full‐cells with a capacity retention of 71% after 2000 cycles at 2C rate. The bioinspired high temperature pore‐closing strategy and the new insights about the pore structure–performance relationship provide a rational guide for designing porous carbon anode of NIBs with tailored pore species and high Na storage capacity.     

Novel Metal@Carbon Spheres Core–Shell Arrays by Controlled Self‐Assembly of Carbon Nanospheres: A Stable and Flexible Supercapacitor Electrode

The high performance of electrochemical energy‐storage devices relies largely on scrupulous design of nanoarchitectures and smart hybridization of bespoke active materials. Carbon nanopsheres (CNSs) are widely used for energy storage and conversion devices. Here, the directional assembly of CNSs on a vertical‐standing metal scaffold into a core/shell array structure is reported. The method uses a three‐step all‐solution synthesis strategy (chemical bath deposition, electrodeposition, and hydrothermal) and begins from ZnO microrod arrays as a sacrificial template. The self‐assembly of CNSs can be correlated to a simultaneous etching effect to the ZnO accompanying the polymerization of glucose precursor. The Ni microtube/CNSs arrays are selected as an example for structural and electrochemical characterizations. The novel type of metal/CNSs arrays is demonstrated to be a highly stable electrode for supercapacitors. The electrodes of metal/CNSs arrays are assembled into symmetric supercapacitors and exhibit high capacitances of 227 F g^?1 (at 2.5 A g^?1) and an outstanding cycling stability with capacitance retention of 97% after 40 000 cycles.     

Free‐Standing 3D Nanoporous Duct‐Like and Hierarchical Nanoporous Graphene Films for Micron‐Level Flexible Solid‐State Asymmetric Supercapacitors

High energy density and power density within a limited volume of flexible solid‐state supercapacitors are highly desirable for practical applications. Here, free‐standing high‐quality 3D nanoporous duct‐like graphene (3D‐DG) films are fabricated with high flexibility and robustness as the backbones to deposit flower‐like MnO₂ nanosheets (3D‐DG@MnO₂). The 3D‐DG is the ideal support for the deposition of large amount of active materials because of its large surface area, appropriate pore structure, and negligible volume compared with other kinds of carbon backbones. Moreover, the 3D‐DG preserve the distinctive 2D coherent electronic properties of graphene, in which charge carriers move rapidly with a small resistance through the high‐quality and continuous chemical vapor deposition‐grown graphene building blocks, which results in a high rate performance. Marvelously, ultrathin (≈50 μm) flexible solid‐state asymmetric supercapacitors (ASCs) using 3D‐DG@MnO₂ as the positive electrode and 3D hierarchical nanoporous graphene films as the negative electrode display ultrahigh volumetric energy density (28.2 mW h cm^?3) and power density (55.7 W cm^?3) at 2.0 V. Furthermore, as‐prepared ASCs show high cycle stability clearly demonstrating their broad applications as power supplies in wearable electronic devices.     

A Conductive Molecular Framework Derived Li2S/N,P‐Codoped Carbon Cathode for Advanced Lithium–Sulfur Batteries

Li₂S is one of the most promising cathode materials for Li‐ion batteries because of its high theoretical capacity and compatibility with Li‐metal‐free anode materials. However, the poor conductivity and electrochemical reactivity lead to low initial capacity and severe capacity decay. In this communication, a nitrogen and phosphorus codoped carbon (N,P–C) framework derived from phytic acid doped polyaniline hydrogel is designed to support Li₂S nanoparticles as a binder‐free cathode for Li–S battery. The porous 3D architecture of N and P codoped carbon provides continuous electron pathways and hierarchically porous channels for Li ion transport. Phosphorus doping can also suppress the shuttle effect through strong interaction between sulfur and the carbon framework, resulting in high Coulombic efficiency. Meanwhile, P doping in the carbon framework plays an important role in improving the reaction kinetics, as it may help catalyze the redox reactions of sulfur species to reduce electrochemical polarization, and enhance the ionic conductivity of Li₂S. As a result, the Li₂S/N,P–C composite electrode delivers a stable capacity of 700 mA h g^?1 with average Coulombic efficiency of 99.4% over 100 cycles at 0.1C and an areal capacity as high as 2 mA h cm^?2 at 0.5C.     

In Situ Encapsulation of Iron Complex Nanoparticles into Biomass‐Derived Heteroatom‐Enriched Carbon Nanotubes for High‐Performance Supercapacitors

The capacitive performance of carbon materials could be enhanced by means of increasing the number of active sites, the surface area, and the porosity as well as through incorporating heteroatoms into the carbon framework. However, the charge storage through electric double‐layer mechanism results in limited increase in capacitance of modified carbon materials. Herein, a simple and straightforward strategy is introduced for in situ synthesizing iron complex (FeX, which X includes O, C, and P) nanoparticles encapsulated into biomass‐derived N, P‐codoped carbon nanotubes (NPCNTs), using a natural resource, egg yolk, as heteroatom‐enriched carbon sources and potassium ferricyanide as the precursor for iron complex. Compared with heteroatom‐enriched carbon nanomaterials derived from the carbonization of egg yolk, the synergetic function of the heteroatom doping, the incorporation of FeX nanoparticles, and the unique structural characteristics endows the as‐prepared sample with largely improved electrochemical performance. As expected, FeX@NPCNTs hybrid nanomaterials exhibit superior capacitive performance, including high specific capacitance, impressive rate performance, and excellent cycle stability. Using the as‐prepared FeX@NPCNTs hybrid nanomaterials as electroactive materials, a symmetric supercapacitor with high capacity and a long‐term cyclability is finally demonstrated (more than 99% capacitance retention after 50 000 cycles at a current density of 10 A g^?1).