Nitrogen‐Doped CNx/CNTs Heteroelectrocatalysts for Highly Efficient Dye‐Sensitized Solar Cells

The use of polydopamine as a nitrogen containing precursor to generate catalytically active nitrogen‐doped carbon (CN_x) materials on carbon nanotubes (CNTs) is reported. These N‐doped CN_x/CNT materials display excellent electrocatalytic activity toward the reduction of triiodide electrolyte in dye‐sensitized solar cells (DSSCs). Further, the influence of various synthesis parameters on the catalytic performance of CN_x/CNTs is investigated in detail. The best performing device fabricated with the CN_x/CNTs material delivers power conversion efficiency of 7.3%, which is comparable or slightly higher than that of Pt (7.1%) counter electrode‐based DSSC. These CN_x/CNTs materials show great potential to address the issues associated with the Pt electrocatalyst including the high cost and scarcity.     

Metal‐Free Artificial Photosynthesis of Carbon Monoxide Using N‐Doped ZnTe Nanorod Photocathode Decorated with N‐Doped Carbon Electrocatalyst Layer

An artificial photosynthesis system based on N‐doped ZnTe nanorods decorated with an N‐doped carbon electrocatalyst layer is fabricated via an all‐solution process for the selective conversion of CO₂ to CO. Substitutional N‐doping into the ZnTe lattice decreases the bandgap slightly and improves the charge transfer characteristics, leading to enhanced photoelectrochemical activity. Remarkable N‐doping effects are also demonstrated by the N‐doped carbon layer that promotes selective CO₂‐to‐CO conversion instead of undesired water‐to‐H₂ reduction by providing active sites for CO₂ adsorption and activation, even in the absence of metallic redox centers. The photocathode shows promising performance in photocurrent generation (?1.21 mA cm^?2 at ?0.11 V_RHE), CO selectivity (dominant CO production of ≈72%), minor H₂ reduction (≈20%), and stability (corrosion suppression). The metal‐free electrocatalyst/photocatalyst combination prepared via a cost‐effective solution process exhibits high performance due to synergistic effects between them, and thus may find application in practical solar fuel production.     

MoS2‐Based All‐Purpose Fibrous Electrode and Self‐Powering Energy Fiber for Efficient Energy Harvesting and Storage

Here an all‐purpose fibrous electrode based on MoS₂ is demonstrated, which can be employed for versatile energy harvesting and storage applications. In this coaxial electrode, ultrathin MoS₂ nanofilms are grown on TiO₂ nanoparticles coated carbon fiber. The high electrochemical activity of MoS₂ and good conductivity of carbon fiber synergistically lead to the remarkable performances of this novel composite electrode in fibrous dye‐sensitized solar cells (showing a record‐breaking conversion efficiency of 9.5%) and high‐capacity fibrous supercapacitors. Furthermore, a self‐powering energy fiber is fabricated by combining a fibrous dye‐sensitized solar cell and a fibrous supercapacitor into a single device, showing very fast charging capability (charging in 7 s under AM1.5G solar illumination) and an overall photochemical‐electricity energy conversion efficiency as high as 1.8%. In addition, this wire‐shaped electrode can also be used for fibrous Li‐ion batteries and electrocatalytic hydrogen evolution reactions. These applications indicate that the MoS₂‐based all‐purpose fibrous electrode has great potential for the construction of high‐performance flexible and wearable energy devices.     

Earth‐Abundant Iron Diboride (FeB2) Nanoparticles as Highly Active Bifunctional Electrocatalysts for Overall Water Splitting

Developing efficient, durable, and earth‐abundant electrocatalysts for both hydrogen and oxygen evolution reactions is important for realizing large‐scale water splitting. The authors report that FeB₂ nanoparticles, prepared by a facile chemical reduction of Fe²⁺ using LiBH₄ in an organic solvent, are a superb bifunctional electrocatalyst for overall water splitting. The FeB₂ electrode delivers a current density of 10 mA cm^?2 at overpotentials of 61 mV for hydrogen evolution reaction (HER) and 296 mV for oxygen evolution reaction (OER) in alkaline electrolyte with Tafel slopes of 87.5 and 52.4 mV dec^?1, respectively. The electrode can sustain the HER at an overpotential of 100 mV for 24 h and OER for 1000 cyclic voltammetry cycles with negligible degradation. Density function theory calculations demonstrate that the boron‐rich surface possesses appropriate binding energy for chemisorption and desorption of hydrogen‐containing intermediates, thus favoring the HER process. The excellent OER activity of FeB₂ is ascribed to the formation of a FeOOH/FeB₂ heterojunction during water oxidation. An alkaline electrolyzer is constructed using two identical FeB₂‐NF electrodes as both anode and cathode, which can achieve a current density of 10 mA cm^?2 at 1.57 V for overall water splitting with a faradaic efficiency of nearly 100%, rivalling the integrated state‐of‐the‐art Pt/C and RuO₂/C.     

A Tannic Acid–Derived N‐, P‐Codoped Carbon‐Supported Iron‐Based Nanocomposite as an Advanced Trifunctional Electrocatalyst for the Overall Water Splitting Cells and Zinc–Air Batteries

Rational design and construction of a multifunctional electrocatalyst featuring with high efficiency and low cost is fundamentally important to realize new energy technologies. Herein, a trifunctional electrocatalyst composed of FeP_x nanoparticles and Fe–N–C moiety supported on the N‐, P‐codoped carbon (NPC) is masterly synthesized by a facile one‐pot pyrolysis of the mixture of tannic acid, ferrous chloride, and sodium hydrogen phosphate. The synergy of each component in the FeP_x/Fe–N–C/NPC catalyst renders high catalytic activities and excellent durability toward both oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The electrocatalytic performance and practicability of the robust FeP_x/Fe–N–C/NPC catalyst are further investigated under the practical operation conditions. Particularly, the overall water splitting cell assembled by the FeP_x/Fe–N–C/NPC catalyst only requires a voltage of 1.58 V to output the benchmark current density of 10 mA cm^?2, which is superior to that of IrO₂–Pt/C‐based cell. Moreover, the FeP_x/Fe–N–C/NPC‐based zinc–air batteries deliver high round‐trip efficiency and remarkable cycling stability, much better than that of Pt/C–IrO₂ pair‐based batteries. This work offers a new strategy to design and synthesize highly effective multifunctional electrocatalysts using cheaper tannic acid derived carbon as support applied in electrochemical energy devices.     

A Cu‐Based Nanoparticulate Film as Super‐Active and Robust Catalyst Surpasses Pt for Electrochemical H2 Production from Neutral and Weak Acidic Aqueous Solutions

Electrocatalysts that are stable and highly active at low overpotential (η) under mild conditions as well as cost‐effective and scalable are eagerly desired for potential use in photo‐ and electro‐driven hydrogen evolution devices. Here the fabrication and characterization of a super‐active and robust Cu‐Cu_xO‐Pt nanoparticulate electrocatalyst is reported, which displays a small Tafel slope (44 mV dec^?1) and a large exchange current density (1.601 mA cm^?2) in neutral buffer solution. The catalytic current density of this catalyst film reaches 500 mA cm^?2 at η = ?390 ± 12 mV and 20 mA cm^?2 at η = ?45 ± 3 mV, which are significantly higher than the values displayed by Pt foil and Pt/C electrodes in neutral buffer solution and even comparable with the activity of Pt electrode in 0.5 m H₂SO₄ solution.     

High‐Performance Hydrogen Evolution by Ru Single Atoms and Nitrided‐Ru Nanoparticles Implanted on N‐Doped Graphitic Sheet

The most efficient electrocatalyst for the hydrogen evolution reaction (HER) is a Pt‐based catalyst, but its high cost and nonperfect efficiency hinder wide‐ranging industrial/technological applications. Here, an electrocatalyst of both ruthenium (Ru) single atoms (SAs) and N‐doped‐graphitic(G_N)‐shell‐covered nitrided‐Ru nanoparticles (NPs) (having a Ru‐N_x shell) embedded on melamine‐derived G_N matrix { 1 : [Ru(SA)+Ru(NP)@RuN_x@G_N]/G_N}, which exhibits superior HER activity in both acidic and basic media, is presented. In 0.5 m H₂SO₄/1 m KOH solutions, 1 shows diminutive “negative overpotentials” (?η = |η| = 10/7 mV at 10 mA cm^?2, lowest ever) and high exchange current densities (4.70/1.96 mA cm^?2). The remarkable HER performance is attributed to the near‐zero free energies for hydrogen adsorption/desorption on Ru(SAs) and the increased conductivity of melamine‐derived G_N sheets by the presence of nitrided‐Ru(NPs). The nitridation process forming nitrided‐Ru(NPs), which are imperfectly covered by a G_N shell, allows superb long‐term operation durability. The catalyst splits water into molecular oxygen and hydrogen at 1.50/1.40 V (in 0.1 m HClO₄/1 m KOH), demonstrating its potential as a ready‐to‐use, highly effective energy device for industrial applications.     

Nanostructured Ternary Electrodes for Energy‐Storage Applications

A three‐component, flexible electrode is developed for supercapacitors over graphitized carbon fabric, utilizing γ‐MnO₂ nanoflowers anchored onto carbon nanotubes (γ‐MnO₂/CNT) as spacers for graphene nanosheets (GNs). The three‐component, composite electrode doubles the specific capacitance with respect to GN‐only electrodes, giving the highest‐reported specific capacitance (308 F g^?1) for symmetric supercapacitors containing MnO₂ and GNs using a two‐electrode configuration, at a scan rate of 20 mV s^?1. A maximum energy density of 43 W h kg^?1 is obtained for our symmetric supercapacitors at a constant discharge‐current density of 2.5 A g^?1 using GN–(γ‐MnO₂/CNT)‐nanocomposite electrodes. The fabricated supercapacitor device exhibits an excellent cycle life by retaining ≈90% of the initial specific capacitance after 5000 cycles.     

Achieving High Open‐Circuit Voltages up to 1.57 V in Hole‐Transport‐Material‐Free MAPbBr3 Solar Cells with Carbon Electrodes

An open‐circuit voltage (V_oc) of 1.57 V under simulated AM1.5 sunlight in planar MAPbBr₃ solar cells with carbon (graphite) electrodes is obtained. The hole‐transport‐material‐free MAPbBr₃ solar cells with the normal architecture (FTO/TiO₂/MAPbBr₃/carbon) show little hysteresis during current–voltage sweep under simulated AM1.5 sunlight. A solar‐to‐electricity power conversion efficiency of 8.70% is achieved with the champion device. Accordingly, it is proposed that the carbon electrodes are effective to extract photogenerated holes in MAPbBr₃ solar cells, and the industry‐applicable carbon electrodes will not limit the performance of bromide‐based perovskite solar cells. Based on the analysis of the band alignment, it is found that the voltage (energy) loss across the interface between MAPbBr₃ and carbon is very small compared to the offset between the valence band maximum of MAPbBr₃ and the work function of graphite. This finding implies either Fermi level pinning or highly doped region inside MAPbBr₃ layer exists. The band‐edge electroluminescence spectra of MAPbBr₃ from the solar cells further support no back‐transfer pathways of electrons across the MAPbBr₃/TiO₂ interface.     

Electroless Plating of Highly Efficient Bifunctional Boride‐Based Electrodes toward Practical Overall Water Splitting

Exploring highly‐efficient and low‐cost electrodes for both hydrogen and oxygen evolution reaction (HER and OER) is of primary importance to economical water splitting. Herein, a series of novel and robust bifunctional boride‐based electrodes are successfully fabricated using a versatile Et₂NHBH₃‐involved electroless plating (EP) approach via deposition of nonprecious boride‐based catalysts on various substrates. Owing to the unique binder‐free porous nodule structure induced by the hydrogen release EP reaction, most of the nonprecious boride‐based electrodes are highly efficient for overall water splitting. As a distinctive example, the Co‐B/Ni electrode can afford 10 mA cm^?2 at overpotentials of only 70 mV for HER and 140 mV for OER, and can also survive at large current density of 1000 mA cm^?2 for over 20 h without performance degradation in 1.0 m KOH. Several boride‐based two‐electrode electrolyzers can achieve 10 mA cm^?2 at low voltages of around 1.4 V. Moreover, the facile EP approach is economically viable for flexible and large size electrode production.     

Copper–Nickel Nitride Nanosheets as Efficient Bifunctional Catalysts for Hydrazine‐Assisted Electrolytic Hydrogen Production

Electrocatalytic water splitting is one of the sustainable and promising strategies to generate hydrogen fuel but still remains a great challenge because of the sluggish anodic oxygen evolution reaction (OER). A very effective approach to dramatically decrease the input cell voltage of water electrolysis is to replace the anodic OER with hydrazine oxidation reaction (HzOR) due to its lower thermodynamic oxidation potential. Therefore, developing the low‐cost and efficient HzOR catalysts, coupled with the cathodic hydrogen evolution reaction (HER), is tremendously important for energy‐saving electrolytic hydrogen production. Herein, a new‐type of copper–nickel nitride (Cu₁Ni₂‐N) with rich Cu₄N/Ni₃N interface is rationally constructed on carbon fiber cloth. The 3D electrode exhibits extraordinary HER performance with an overpotential of 71.4 mV at 10 mA cm^?2 in 1.0 m KOH, simultaneously delivering an ultralow potential of 0.5 mV at 10 mA cm^?2 for HzOR in a 1.0 m KOH/0.5 m hydrazine electrolyte. Moreover, the electrolytic cell utilizing the synthesized Cu₁Ni₂‐N electrode as both the cathode and anode display a cell voltage of 0.24 V at 10 mA cm^?2 with an excellent stability over 75 h. The present work develops the promising copper–nickel‐based nitride as a bifunctional electrocatalyst through hydrazine‐assistance for energy‐saving electrolytic hydrogen production.     

Facile Synthesis of 3D MnO2–Graphene and Carbon Nanotube–Graphene Composite Networks for High‐Performance,Flexible, All‐Solid‐State Asymmetric Supercapacitors

The integration of graphene nanosheets on the macroscopic level using a self‐assembly method has been recognized as one of the most effective strategies to realize the practical applications of graphene materials. Here, a facile and scalable method is developed to synthesis two types of graphene‐based networks, manganese dioxide (MnO₂)–graphene foam and carbon nanotube (CNT)–graphene foam, by solution casting and subsequent electrochemical methods. Their practical applications in flexible all‐solid‐state asymmetric supercapacitors are explored. The proposed method facilitates the structural integration of graphene foam and the electroactive material and offers several advantages including simplicity, efficiency, low‐temperature, and low‐cost. The as‐prepared MnO₂–graphene and CNT–graphene electrodes exhibit high specific capacitances and rate capability. By using polymer gel electrolytes, a flexible all‐solid‐state asymmetric supercapacitor was synthesized with MnO₂–graphene foam as the positive electrode and CNT‐graphene as the negative electrode. The asymmetric supercapacitors can be cycled reversibly in a high‐voltage region of 0 to 1.8 V and exhibit high energy density, remarkable rate capability, reasonable cycling performance, and excellent flexibility.     

Paramelaconite‐Enriched Copper‐Based Material as an Efficient and Robust Catalyst for Electrochemical Carbon Dioxide Reduction

A copper‐oxide‐based catalyst enriched with paramelaconite (Cu₄O₃) is presented and investigated as an electrocatalyst for facilitating electroreduction of CO₂ to ethylene and other hydrocarbons. Cu₄O₃ is a member of the copper‐oxide family and possesses an intriguing mixed‐valance nature, incorporating an equal number of Cu⁺ and Cu²⁺ ions in its crystal structure. The material is synthesized using a solvothermal synthesis route and its structure is confirmed via powder X‐ray diffraction, transmission electron microscope based selected area electron diffraction, and X‐ray photoelectron spectroscopy. A flow reactor equipped with a gas diffusion electrode is utilized to test a copper‐based catalyst enriched with the Cu₄O₃ phase under CO₂ reduction conditions. The Cu₄O₃‐rich catalyst (PrC) shows a Faradaic efficiency for ethylene over 40% at 400 mA cm^?2. At ?0.64 versus reversible hydrogen electrode, the highest C₂₊/C₁ product ratio of 4.8 is achieved, with C₂₊ Faradaic efficiency over 61%. Additionally, the catalyst exhibits a stable performance for 24 h at a constant current density of 200 mA cm^?2.     

Synthesis,Characterization, and Structural Modeling of High‐Capacity,Dual Functioning MnO2 Electrode/Electrocatalysts for Li‐O2 Cells

It has become clear that cycling lithium‐oxygen cells in carbonate electrolytes is impractical, as electrolyte decomposition, triggered by oxygen reduction products, dominates the cell chemistry. This research shows that employing an α‐MnO₂/ramsdellite‐MnO₂ electrode/electrocatalyst results in the formation of lithium‐oxide‐like discharge products in propylene carbonate, which has been reported to be extremely susceptible to decomposition. X‐ray photoelectron data have shown that what are likely lithium oxides (Li₂O₂ and Li₂O) appear to form and decompose on the air electrode surface, particularly at the MnO₂ surface, while Li₂CO₃ is also formed. By contrast, cells without α‐MnO₂/ramsdellite‐MnO₂ fail rapidly in electrochemical cycling, likely due to the differences in the discharge product. Relatively high electrode capacities, up to 5000 mAh/g (carbon + electrode/electrocatalyst), have been achieved with non‐optimized air electrodes. Insights into reversible insertion reactions of lithium, lithium peroxide (Li₂O₂) and lithium oxide (Li₂O) in the tunnels of α‐MnO₂, and the reaction of lithium with ramsdellite‐MnO₂, as determined by first principles density functional theory calculations, are used to provide a possible explanation for some of the observed results. It is speculated that a Li₂O‐stabilized and partially‐lithiated electrode component, 0.15Li₂O·α‐Li_xMnO₂, that has Mn^4+/3+ character may facilitate the Li₂O₂/Li₂O discharge/charge chemistries providing dual electrode/electrocatalyst functionality.     

Engineered MoSe2‐Based Heterostructures for Efficient Electrochemical Hydrogen Evolution Reaction

2D transition metal‐dichalcogenides are emerging as efficient and cost‐effective electrocatalysts for the hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER‐electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Herein, the authors tackle the key challenge of increasing the number of electrocatalytic sites by designing and engineering heterostructures composed of single‐/few‐layer MoSe₂ flakes and carbon nanomaterials (graphene or single‐wall carbon nanotubes) produced by solution processing. The electrochemical coupling between the materials that comprise the heterostructure effectively enhances the HER‐electrocatalytic activity of the native MoSe₂ flakes. The optimization of the mass loading of MoSe₂ flakes and their electrode assembly via monolithic heterostructure stacking provides a cathodic current density of 10 mA cm^?2 at overpotential of 100 mV, a Tafel slope of 63 mV dec^?1, and an exchange current density (j₀) of 0.203 µA cm^?2. In addition, thermal and chemical treatments are exploited to texturize the basal planes of the MoSe₂ flakes (through Se‐vacancies creation) and to achieve in situ semiconducting‐to‐metallic phase conversion, respectively, thus they activate new HER‐electrocatalytic sites. The as‐engineered electrodes show a 4.8‐fold enhancement of j₀ and a decrease in the Tafel slope to 54 mV dec^?1.     

High‐Energy Density Li‐Ion Capacitor with Layered SnS2/Reduced Graphene Oxide Anode and BCN Nanosheet Cathode

Lithium‐ion capacitors (LICs) with capacitor‐type cathodes and battery‐type anodes are considered a promising next‐generation advanced energy storages system that meet the requirements of high energy density and power density. However, the mismatch of charge‐storage capacity and electrode kinetics between positive and negative electrodes remains a challenge. Herein, layered SnS₂/reduced graphene oxide (RGO) nanocomposites are developed for negative electrodes and a 2D B/N codoped carbon (BCN) nanosheet is designed for the positive electrode. The SnS₂/RGO derived from SnS₂‐bonded RGO of high conductivity exhibits a capacity of 1198 mA h g^?1 at 100 mA g^?1. Boron and nitrogen atoms in BCN are found to promote adsorption of anions, which enhance the pseudocapacitive contribution as well as expanding the voltage of LICs. A quantitative kinetics analysis indicates that the SnS₂/RGO electrodes with a dominating capacitive mechanism and a diminished intercalation process, benefit the kinetic balance between the two electrodes. With this particular structure, the LIC is able to operate at the highest operating voltage for these devices recorded to date (4.5 V), exhibiting an energy density of 149.5 W h kg^?1, a power density of 35 kW kg^?1, and a capacity retention ratio of 90% after 10 000 cycles.     

Enhanced Stability of Coated Carbon Electrode for Li‐O2 Batteries and Its Limitations

Li‐O₂ batteries are promising next‐generation energy storage systems because of their exceptionally high energy density (≈3500 W h kg^?1). However, to achieve stable operation, grand challenges remain to be resolved, such as preventing electrolyte decomposition and degradation of carbon, a commonly used air electrode in Li‐O₂ batteries. In this work, using in situ differential electrochemical mass spectrometry, it is demonstrated that the application of a ZnO coating on the carbon electrode can effectively suppress side reactions occurring in the Li‐O₂ battery. By probing the CO₂ evolution during charging of ¹³C‐labeled air electrodes, the major sources of parasitic reactions are precisely identified, which further reveals that the ZnO coating retards the degradation of both the carbon electrode and electrolyte. The successful suppression of the degradation results in a higher oxygen efficiency, leading to enhanced stability for more than 100 cycles. Nevertheless, the degradation of the carbon electrode is not completely prevented by the coating, because the Li₂O₂ discharge product gradually grows at the interface between the ZnO and carbon, which eventually results in detachment of the ZnO particles from the electrode and subsequent deterioration of the performance. This finding implies that surface protection of the carbon electrode is a viable option to enhance the stability of Li‐O₂ batteries; however, fundamental studies on the growth mechanism of the discharge product on the carbon surface are required along with more effective coating strategies.     

A Three‐Dimensionally Interconnected Carbon Nanotube–Conducting Polymer Hydrogel Network for High‐Performance Flexible Battery Electrodes

High‐performance flexible energy‐storage devices have great potential as power sources for wearable electronics. One major limitation to the realization of these applications is the lack of flexible electrodes with excellent mechanical and electrochemical properties. Currently employed batteries and supercapacitors are mainly based on electrodes that are not flexible enough for these purposes. Here, a three‐dimensionally interconnected hybrid hydrogel system based on carbon nanotube (CNT)‐conductive polymer network architecture is reported for high‐performance flexible lithium ion battery electrodes. Unlike previously reported conducting polymers (e.g., polyaniline, polypyrrole, polythiophene), which are mechanically fragile and incompatible with aqueous solution processing, this interpenetrating network of the CNT‐conducting polymer hydrogel exibits good mechanical properties, high conductivity, and facile ion transport, leading to facile electrode kinetics and high strain tolerance during electrode volume change. A high‐rate capability for TiO₂ and high cycling stability for SiNP electrodes are reported. Typically, the flexible TiO₂ electrodes achieved a capacity of 76 mAh g^–1 in 40 s of charge/discharge and a high areal capacity of 2.2 mAh cm^–2 can be obtained for flexible SiNP‐based electrodes at 0.1C rate. This simple yet efficient solution process is promising for the fabrication of a variety of high performance flexible electrodes.     

Surface Engineering of 3D Gas Diffusion Electrodes for High‐Performance H2 Production with Nonprecious Metal Catalysts

In this work, a methodology is demonstrated to engineer gas diffusion electrodes for nonprecious metal catalysts. Highly active transition metal phosphides are prepared on carbon‐based gas diffusion electrodes with low catalyst loadings by modifying the O/C ratio at the surface of the electrode. These nonprecious metal catalysts yield extraordinary performance as measured by low overpotentials (51 mV at ?10 mA cm^?2), unprecedented mass activities (>800 A g^?1 at 100 mV overpotential), high turnover frequencies (6.96 H₂ s^?1 at 100 mV overpotential), and high durability for a precious metal‐free catalyst in acidic media. It is found that a high O/C ratio induces a more hydrophilic surface directly impacting the morphology of the CoP catalyst. The improved hydrophilicity, stemming from introduced oxyl groups on the carbon electrode, creates an electrode surface that yields a well‐distributed growth of cobalt electrodeposits and thus a well‐dispersed catalyst layer with high surface area upon phosphidation. This report demonstrates the high‐performance achievable by CoP at low loadings which facilitates further cost reduction, an important part of enabling the large‐scale commercialization of non‐platinum group metal catalysts. The fabrication strategies described herein offer a pathway to lower catalyst loading while achieving high efficiency and promising stability on a 3D electrode.