High‐Performance,Transparent, Dye‐Sensitized Solar Cells for See‐Through Photovoltaic Windows

Dye‐sensitized solar cells (DSCs) have attracted great interest as one of the most promising photovoltaic technologies, and transparent DSCs show potential applications as photovoltaic windows. However, the competition between light absorption for photocurrent generation and light transmittance for obtaining high transparency limits the performance of transparent DSCs. Here, transparent DSCs exhibiting a high light transmittance of 60.3% and high energy conversion efficiency (3.66%) are reported. The strategy is to create a cocktail system composed of ultraviolet and near‐infrared dye sensitizers that selectively and efficiently harvest light in the invisible or low‐eye‐sensitivity region while transmitting light in high‐eye‐sensitivity regions. This new design provides a reasonable approach for realizing high efficiency and transparency DSCs that have potential applications as photovoltaic windows.     

High‐Performance Solution‐Processed Double‐Walled Carbon Nanotube Transparent Electrode for Perovskite Solar Cells

Double‐walled carbon nanotubes are between single‐walled carbon nanotubes and multiwalled carbon nanotubes. They are comparable to single‐walled carbon nanotubes with respect to the light optical density, but their mechanical stability and solubility are higher. Exploiting such advantages, solution‐processed transparent electrodes are demonstrated using double‐walled carbon nanotubes and their application to perovskite solar cells is also demonstrated. Perovskite solar cells which harvest clean solar power have attracted a lot of attention as a next‐generation renewable energy source. However, their eco‐friendliness, cost, and flexibility are limited by the use of transparent oxide conductors, which are inflexible, difficult to fabricate, and made up of expensive rare metals. Solution‐processed double‐walled carbon nanotubes can replace conventional transparent electrodes to resolve such issues. Perovskite solar cells using the double‐walled carbon nanotube transparent electrodes produce an operating power conversion efficiency of 17.2% without hysteresis. As the first solution‐processed electrode‐based perovskite solar cells, this work will pave the pathway to the large‐size, low‐cost, and eco‐friendly solar devices.     

Metal‐Nanowire‐Electrode‐Based Perovskite Solar Cells: Challenging Issues and New Opportunities

Recently, organometal halide perovskite (OMHP)‐based solar cells have been regarded as one of the most promising technologies in the research field of renewable energy applications. Along with successful demonstrations of high power conversion efficiencies (PCEs), various characteristic strategies for fabricating functional OMHP‐based solar cells have been exploited to facilitate both their practical applicability and industrial suitability. As a part of such efforts, unconventional transparent conductive electrodes have been suggested based on the implementation of metal nanowires (MeNWs), which possess both high transparency and low sheet resistance, in order to replace traditional counterparts such as costly, limitedly‐flexible vacuum‐deposited conductive metal oxides. This allows for the facile fabrication of solution‐processable, low‐cost, highly flexible, high‐performance solar cell devices. In this review, the recent progress on OMHP solar cells integrated with MeNW‐network electrodes is investigated and the challenges associated with the integration of MeNW‐network electrodes are comprehensively addressed with the suggestion of possible solutions for resolving the critical issues.     

High‐Efficiency and Reliable Smart Photovoltaic Windows Enabled by Multiresponsive Liquid Crystal Composite Films and Semi‐Transparent Perovskite Solar Cells

Smart photovoltaic windows (SPWs) are functional devices possessing the capabilities of electrical power output, energy saving, and privacy protection by managing sunlight under external stimuli and potentially applicable in the fields of energy‐saving buildings, automobiles, and switchable optoelectronics. However, long response time, low power conversion efficiency (PCE), poor stability and cycling performance, and monostimuli responsive behavior restrict their practical applications. To address these issues, high‐efficiency and reliable SPWs are demonstrated by coupling multiresponsive liquid crystal/polymer composite (LCPC) films and semi‐transparent perovskite solar cells (ST‐PSCs). In this design, fast and multiple stimuli‐responsive LCPC films are utilized as an inside layer to control the transparency of SPWs. The ST‐PSCs with competitive PCE and qualified transparency acting as an outside layer offer energy generation functionality. Benefiting from repeatable transparency transition modulated by external stimuli, a series of working modes are achieved in the SPWs providing distinguished and stable energy generation, energy saving, and privacy protection performances.     

Efficient Semi‐Transparent Organic Solar Cells with Good Transparency Color Perception and Rendering Properties

Window integrated photovoltaics for automotive and building applications are a promising market segment for organic solar modules. Besides semi‐transparency, window integrated applications require a reasonable transparency perception and good color rendering properties in order to be suitable for realistic scene illumination. Here, the transmitted light through semi‐transparent organic solar cells comprising the polymer/fullerene blend poly[(4,4'‐bis(2‐ethylhexyl)dithieno[3,2‐b:2',3'‐d]silole)‐2,6‐diyl‐alt‐(2,1,3‐benzothiadiazole)‐4,7‐diyl]: [6,6]‐phenyl C₇₁‐butric acid methyl ester (PSBTBT:PC₇₀BM) as active layer and a sputtered aluminum doped zinc oxide cathode were found to exhibit a color neutral perception for the human eye and very good color rendering properties. Moreover, the electrical cell properties allow for efficient energy harvesting with an overall power conversion efficiency η ≈ 3%.     

Square‐Centimeter‐Sized High‐Efficiency Polymer Solar Cells: How the Processing Atmosphere and Film Quality Influence Performance at Large Scale

Organic solar cells based on two benzodithiophene‐based polymers (PTB7 and PTB7‐Th) processed at square centimeter‐size under inert atmosphere and ambient air, respectively, are investigated. It is demonstrated that the performance of solar cells processed under inert atmosphere is not limited by the upscaling of photoactive layer and the interfacial layers. Thorough morphological and electrical characterizations of optimized layers and corresponding devices reveal that performance losses due to area enlargement are only caused by the sheet resistance of the transparent electrode reducing the efficiency from 9.3% of 7.8% for PTB7‐Th in the condition that both photoactive layer and the interfacial layers are of high layer quality. Air processing of photoactive layer and the interfacial layers into centimeter‐sized solar cells lead to additional, but only slight, losses (<10%) in all photovoltaic parameters, which can be addressed to changes in the electronic properties of both active layer and ZnO layers rather than changes in layer morphology. The demonstrated compatibility of polymer solar cells using solution‐processed photoactive layer and interfacial layers with large area indicates that the introduction of a standard active area of 1 cm² for measuring efficiency of organic record solar cells is feasible. However electric standards for indium tin oxides (ITO) or alternative transparent electrodes need to be developed so that performance of new photovoltaic materials can be compared at square centimeter‐size.     

High‐Performance Ta2O5/Al‐Doped Ag Electrode for Resonant Light Harvesting in Efficient Organic Solar Cells

A efficient indium tin oxide (ITO)‐free transparent electrode based on an improved Ag film is designed by introducing small amount of Al during co‐deposition, producing ultrathin and smooth Ag film with low loss. A transparent electrode as thin as 4 nm is achieved by depositing the film on top of Ta₂O₅ layer, and organic solar cells based on such ultrathin electrode are built, producing power conversion efficiency over 7%. The device efficiency can be optimized by simply tuning Ta₂O₅ layer thickness external to the organic photovoltaic (OPV) structure to create an optical cavity resonance inside the photoactive layer. Therefore Ta₂O₅/Al‐doped Ag films function as a high‐performance electrode with high transparency, low resistance, improved photon management capability and mechanical flexibility.     

Scalable and Solid‐State Redox Functionalization of Transparent Single‐Walled Carbon Nanotube Films for Highly Efficient and Stable Solar Cells

This study reports a scalable and room‐temperature solid‐state redox functionalization process for single‐walled carbon nanotubes (SWNTs) with instant efficacy and high stability. By drop‐casting/spin‐coating CuCl₂/Cu(OH)₂ colloidal ethanol solution onto SWNT films, the sheet resistance of the SWNT films achieves 69.4 Ω sq^?1 at 90% transparency without noticeable increase for more than 12 months. The charge transfer mechanism between the redox and the SWNTs is revealed by Raman and X‐ray photoelectron spectroscopies. The SWNT/silicon solar cells are utilized as a benchmark to evaluate the effectiveness of the redox functionalization process and its compatibility for device integration. The power conversion efficiency of the SWNT/Si solar cell increases by 115% after redox functionalization, reaching the value of 14.09% without degradation in the ambient for over 12 months. Temperature‐dependent operation characteristics of the redox functionalized SWNT/Si solar cells demonstrate that the Fermi level unpinning and enhanced tunneling of the charge carriers contribute to the significant improvement of the photovoltage and fill factor. The CuCl₂/Cu(OH)₂ redox also serves as an antireflection layer, resulting in a 20% increase of the photocurrent. The proposed redox functionalized SWNTs are promising as multifunctional transparent conductive films for wide‐range solar cell applications.     

Semi‐Transparent Tandem Organic Solar Cells with 90% Internal Quantum Efficiency

Semi‐transparent (ST) organic solar cells with potential application as power generating windows are studied. The main challenge is to find proper transparent electrodes with desired electrical and optical properties. In this work, this is addressed by employing an amphiphilic conjugated polymer PFPA‐1 modified ITO coated glass substrate as the ohmic electron‐collecting cathode and PEDOT:PSS PH1000 as the hole‐collecting anode. For active layers based on different donor polymers, considerably lower reflection and parasitic absorption are found in the ST solar cells as compared to solar cells in the standard geometry with an ITO/PEDOT:PSS anode and a LiF/Al cathode. The ST solar cells have remarkably high internal quantum efficiency at short circuit condition (～90%) and high transmittance (～50%). Hence, efficient ST tandem solar cells with enhanced power conversion efficiency (PCE) compared to a single ST solar cell can be constructed by connecting the stacked two ST sub‐cells in parallel. The total loss of photons by reflection, parasitic absorption and transmission in the ST tandem solar cell can be smaller than the loss in a standard solar cell based on the same active materials. We demonstrate this by stacking five separately prepared ST cells on top of each other, to obtain a higher photocurrent than in an optimized standard solar cell.     

Visibly‐Transparent Organic Solar Cells on Flexible Substrates with All‐Graphene Electrodes

Portable electronic devices have become increasingly widespread. Because these devices cannot always be tethered to a central grid, powering them will require low‐cost energy harvesting technologies. As a response to this anticipated demand, this study demonstrates transparent organic solar cells fabricated on flexible substrates, including plastic and paper, using graphene as both the anode and cathode. Optical transmittance of up to 69% at 550 nm is achieved by combining the highly transparent graphene electrodes with organic polymers that primarily absorb in the near‐IR and near‐UV regimes. To address the challenge of transferring graphene onto organic layers as the top electrode, this study develops a room temperature dry‐transfer technique using ethylene‐vinyl‐acetate as an adhesion‐promoting interlayer. The power conversion efficiency achieved for flexible devices with graphene anode and cathode devices is 2.8%–3.8% at for optical transmittance of 54%–61% across the visible regime. These results demonstrate the versatility of graphene in optoelectronic applications and it is important step toward developing a practical power source for distributed wireless electrical systems.     

Organic Salts as a Route to Energy Level Control in Low Bandgap,High Open‐Circuit Voltage Organic and Transparent Solar Cells that Approach the Excitonic Voltage Limit

A new series of organic salts with selective near‐infrared (NIR) harvesting to 950 nm is reported, and anion selection and blending is demonstrated to allow for fine tuning of the open‐circuit voltage. Extending photoresponse deeper into the NIR is a significant challenge facing small molecule organic photovoltaics, and recent demonstrations have been limited by open‐circuit voltages much lower than the theoretical and practical limits. This work presents molecular design strategies that enable facile tuning of energy level alignment and open‐circuit voltages in organic salt‐based photovoltaics. Anions are also shown to have a strong influence on exciton diffusion length. These insights provide a clear route toward achieving high efficiency transparent and panchromatic photovoltaics, and open up design opportunities to rapidly tailor molecules for new donor–acceptor systems.     

ITO‐Free,Small‐Molecule Organic Solar Cells on Spray‐Coated Copper‐Nanowire‐Based Transparent Electrodes

The great potential of solution‐processed metal nanowire networks utilized as a transparent electrode has attracted much attention in the last years. Typically, silver nanowires are applied, although their replacement by more abundant and cheaper materials is of interest. Here, a hydrazine‐free synthesis route for high aspect ratio copper nanowires is used to prepare conductive networks showing an enhanced electrode performance. The network deposition is done with a scalable spray‐coating process on glass and on polymer foils. By a pressing or an annealing step, highly conductive transparent electrodes are obtained, and they reveal transmittance‐resistance values similar to indium tin oxide (ITO) and networks made of silver nanowires. The application potential of the copper nanowire electrodes is demonstrated by integrating them into an evaporated small‐molecule organic solar cell with 3% efficiency.     

Spray Deposition of Silver Nanowire Electrodes for Semitransparent Solid‐State Dye‐Sensitized Solar Cells

Transparent top electrodes for solid‐state dye‐sensitized solar cells (ssDSCs) allow for fabrication of mechanically stacked ssDSC tandems, partially transparent ssDSCs for building integration, and ssDSCs on metal foil substrates. A solution‐processed, highly transparent, conductive electrode based on PEDOT:PSS [poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)] and spray‐deposited silver nanowires (Ag NWs) is developed as an effective top contact for ssDSCs. The electrode is solution‐deposited using conditions and solvents that do not damage or dissolve the underlying ssDSC and achieves high performance: a peak transmittance of nearly 93% at a sheet resistance of 18 Ω/square – all without any annealing that would harm the ssDSC. The role of the PEDOT:PSS in the electrode is twofold: it ensures ohmic contact between the ssDSC 2,2′,7,7′‐tetrakis‐(N,N‐di‐p‐methoxyphenylamine)9,9′‐spirobifluorene (Spiro‐OMeTAD) overlayer and the silver nanowires and it decreases the series resistance of the device. Semitransparent ssDSCs with D35 dye fabricated using this Ag NW/PEDOT:PSS transparent electrode show power conversion efficiencies of 3.6%, nearly as high as a reference device using an evaporated silver electrode (3.7%). In addition, the semitransparent ssDSC shows high transmission between 700–1100 nm, a necessity for use in efficient tandem devices. Such an electrode, in combination with efficient ssDSCs or hybrid perovskite‐sensitized solar cells, can allow for the fabrication of efficient, cost‐effective tandem photovoltaics.     

Nanowire‐Based Three‐Dimensional Transparent Conducting Oxide Electrodes for Extremely Fast Charge Collection

A 3D transparent conducting oxide (3D‐TCO) has been fabricated by growing Sn‐doped indium oxide (ITO) nanowire arrays on glass substrates via a vapor transport method. The 3D TCO charge‐collection properties have been compared to those of conventional two‐dimensional TCO (2D‐TCO) thin films. For use as a photoelectrode in dye‐sensitized solar cells, ITO‐TiO₂ core‐shell nanowire arrays were prepared by depositing a 45 nm‐thick mesoporous TiO₂ shell layer consisting of ～6 nm anatase nanoparticles using TiCl₄ treatments. Dye‐sensitized solar cells fabricated using these ITO‐TiO₂ core‐shell nanowire arrays show extremely fast charge collection owing to the shorter electron paths across the 45 nm‐thick TiO₂ shell compared to the 2D TCO. Interestingly, the charge‐collection time does not increase with the overall electrode thickness, which is counterintuitive to conventional diffusion models. This result implies that, in principle, maximum light harvesting can be achieved without hindering the charge collection. The proposed new 3D TCO should also be attractive for other photovoltaic applications where the active layer thickness is limited by poor charge collection.     

All‐Solution‐Processed Silver Nanowire Window Electrode‐Based Flexible Perovskite Solar Cells Enabled with Amorphous Metal Oxide Protection

Silver nanowire (AgNW)‐based transparent electrodes prepared via an all‐solution‐process are proposed as bottom electrodes in flexible perovskite solar cells (PVSCs). To enhance the chemical stability of AgNWs, a pinhole‐free amorphous aluminum doped zinc oxide (a‐AZO) protection layer is deposited on the AgNW network. Compared to its crystalline counterpart (c‐AZO), a‐AZO substantially improves the chemical stability of the AgNW network. For the first time, it is observed that inadequately protected AgNWs can evanesce via diffusion, whereas a‐AZO secures the integrity of AgNWs. When an optimally thick a‐AZO layer is used, the a‐AZO/AgNW/AZO composite electrode exhibits a transmittance of 88.6% at 550 nm and a sheet resistance of 11.86 Ω sq^?1, which is comparable to that of commercial fluorine doped tin oxide. The PVSCs fabricated with a configuration of Au/spiro‐OMeTAD/CH₃NH₃PbI₃/ZnO/AZO/AgNW/AZO on rigid and flexible substrates can achieve power conversion efficiencies (PCEs) of 13.93% and 11.23%, respectively. The PVSC with the a‐AZO/AgNW/AZO composite electrode retains 94% of its initial PCE after 400 bending iterations with a bending radius of 12.5 mm. The results clearly demonstrate the potential of AgNWs as bottom electrodes in flexible PVSCs, which can facilitate the commercialization and large‐scale deployment of PVSCs.     

High‐Performance Suspended Particle Devices Based on Copper‐Reduced Graphene Oxide Core–Shell Nanowire Electrodes

Smart windows are one of the key components of so‐called “green” buildings. These windows are based on an actively switchable electro‐optic material that is sandwiched between two transparent electrodes. Although great progress has been made in identifying the optimal materials for such active windows, there is still a great need to improve their key elements, especially the performance of the transparent electrodes. Here, a new suspended particle device (SPD), holding a great potential for smart window applications, which is built upon copper‐reduced graphene oxide (Cu‐rGO) core–shell nanowire (NW) films as a transparent conductive electrode is reported. With the wrapping of rGO, the Cu NW electrodes demonstrate both high optical transparency and electrical conductivity, as well as significantly improved stability under various testing conditions. The novel sandwich‐structured SPDs, based on these electrodes, show a large change in their optical transmittance (42%) between “on” and “off” states, impressively fast switching time and superior stability. These high performances are comparable to those of the SPDs based on indium tin oxide electrodes. These promising results pave the way for the electrodes to be an integral part of a variety of optoelectronic devices, including energy‐friendly and flexible electronics.     

Overcoming Interfacial Losses in Solution‐Processed Organic Multi‐Junction Solar Cells

Organic solar cells are promising in terms of full‐solution‐processing which enables low‐cost and large‐scale fabrication. While single‐junction solar cells have seen a boost in power conversion efficiency (PCE), multi‐junction solar cells are promising to further enhance the PCE. In all‐solution‐processed multi‐junction solar cells, interfacial losses are often encountered between hole‐transporting layer (HTL) and the active layers and therefore greatly limit the application of newly developed high‐performance donor and acceptor materials in multi‐junction solar cells. Here, the authors report on a systematic study of interface losses in both single‐junction and multi‐junction solar cells based on representative polymer donors and HTLs using electron spectroscopy and time‐of‐flight secondary ion mass spectrometry. It is found that a facile mixed HTL containing poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) and MoO _x nanoparticles successfully overcomes the interfacial losses in both single‐ and multi‐junction solar cells based on various active layers by reducing interface protonation, promoting better energy‐level alignment, and forming a dense and smooth layer. Solution‐processed single‐junction solar cells are demonstrated to reach the same performance as with evaporated MoO _x (over 7%). Multi‐junction solar cells with polymers containing nitrogen atoms as the first layer and the mixed PEDOT:PSS and MoO _x nanoparticles as hole extraction layer reach fill factor (FF) of over 60%, and PCE of over 8%, while the identical stack with pristine PEDOT:PSS or MoO _x nanoparticles show FF smaller than 50% and PCE less than 5%.     

ITO‐Free and Fully Solution‐Processed Semitransparent Organic Solar Cells with High Fill Factors

Organic photovoltaic (OPV) solar cells that can be simply processed from solution are in the focus of the academic and industrial community because of their enormous potential to reduce cost. One big challenge in developing a fully solution‐processed OPV technology is the design of a well‐performing electrode system, allowing the replacement of ITO. Several solution‐processed electrode systems were already discussed, but none of them could match the performance of ITO. Here, we report efficient ITO‐free and fully solution‐processed semitransparent inverted organic solar cells based on silver nanowire (AgNW) electrodes. To demonstrate the potential of these AgNW electrodes, they were employed as both the bottom and top electrodes. Record devices achieved fill factors as high as 63.0%, which is comparable to ITO based reference devices. These results provide important progress for fully printed organic solar cells and indicate that ITO‐free, transparent as well as non‐transparent organic solar cells can indeed be fully solution‐processed without losses.     

Progress in Tandem Solar Cells Based on Hybrid Organic–Inorganic Perovskites

Owing to their high efficiency, low‐cost solution‐processability, and tunable bandgap, perovskite solar cells (PSCs) made of hybrid organic‐inorganic perovskite (HOIP) thin films are promising top‐cell candidates for integration with bottom‐cells based on Si or other low‐bandgap solar‐cell materials to boost the power conversion efficiency (PCE) beyond the Shockley‐Quiesser (S‐Q) limit. In this review, recent progress in such tandem solar cells based on the emerging PSCs is summarized and reviewed critically. Notable achievements for different tandem solar cell configurations including mechanically‐stacked, optical coupling, and monolithically‐integrated with PSCs as top‐cells are described in detail. Highly‐efficient semitransparent PSC top‐cells with high transmittance in near‐infrared (NIR) region are critical for tandem solar cells. Different types of transparent electrodes with high transmittance and low sheet‐resistance for PSCs are reviewed, which presents a grand challenge for PSCs. The strategies to obtain wide‐bandgap PSCs with good photo‐stability are discussed. The PCE reduction due to reflection loss, parasitic absorption, electrical loss, and current mismatch are analyzed to provide better understanding of the performance of PSC‐based tandem solar cells.     

Near‐Infrared Light‐Induced Photocurrent from a (NaYF4:Yb‐Tm)/(Cu2O) Composite Thin Film

Utilization of photons of sub‐bandgap energy, mostly near‐infrared (NIR) photo­ns, is highly desirable for photovoltaic devices. We show that (NaYF₄:Yb‐Tm)/(Cu₂O) composite films formed by electrodeposition exhibit robust photoactive current generation under NIR light excitation. The composite films consist of homogeneous crystalline particles of the fluoride and Cu₂O in sub‐micrometer size. From spectroscopic characterization, it is found that the NaYF₄:Yb‐Tm layer in the composite film converts NIR radiation by up‐conversion into visible emission, which is efficiently absorbed by the covering semiconducting Cu₂O film, producing photoelectrons. Accordingly, the composite films exhibit highly photoactive current generation by means of a photoelectrochemical process driven by NIR irradiation. The methodology demonstrated here may have certain implications for the utilization of NIR radiation in solar cells, photocatalysts, and infrared photodetectors.