Combining Nature‐Inspired,Graphene‐Wrapped Flexible Electrodes with Nanocomposite Polymer Electrolyte for Asymmetric Capacitive Energy Storage

Two kinds of free‐standing electrodes, reduced graphene oxide (rGO)‐wrapped Fe‐doped MnO₂ composite (G‐MFO) and rGO‐wrapped hierarchical porous carbon microspheres composite (G‐HPC) are fabricated using a frozen lake‐inspired, bubble‐assistance method. This configuration fully enables utilization of the synergistic effects from both components, endowing the materials to be excellent electrodes for flexible and lightweight electrochemical capacitors. Moreover, a nonaqueous HPC‐doped gel polymer electrolyte (GPE‐HPC) is employed to broad voltage window and improve heat resistance. A fabricated asymmetric supercapacitor based on G‐MFO cathode and G‐HPC anode with GPE‐HPC electrolyte achieves superior flexibility and reliability, enhanced energy/power density, and outstanding cycling stability. The ability to power light‐emitting diodes also indicates the feasibility for practical use. Therefore, it is believed that this novel design may hold great promise for future flexible electronic devices.     

Textile‐Based Electrochemical Energy Storage Devices

In the past few years, insensitive attentions have been drawn to wearable and flexible energy storage devices/systems along with the emergence of wearable electronics. Much progress has been achieved in developing flexible electrochemical energy storage devices with high end‐use performance. However, challenges still remain in well balancing the electrochemical properties, mechanical properties, and the processing technologies. In this review, a specific perspective on the development of textile‐based electrochemical energy storage devices (TEESDs), in which textile components and technologies are utilized to enhance the energy storage ability and mechanical properties of wearable electronic devices, is provided. The discussion focuses on the material preparation and characteristics, electrode and device fabrication strategies, electrochemical performance and metrics, wearable compatibility, and fabrication scalability of TEESDs including textile‐based supercapacitors and lithium‐ion batteries.     

Tuning Nanofillers in In Situ Prepared Polyimide Nanocomposites for High‐Temperature Capacitive Energy Storage

Modern electronics and electrical systems demand efficient operation of dielectric polymer‐based capacitors at high electric fields and elevated temperatures. Here, polyimide (PI) dielectric composites prepared from in situ polymerization in the presence of inorganic nanofillers are reported. The systematic manipulation of the dielectric constant and bandgap of the inorganic fillers, including Al₂O₃, HfO₂, TiO₂, and boron nitride nanosheets, reveals the dominant role of the bandgap of the fillers in determining and improving the high‐temperature capacitive performance of the polymer composites, which is very different from the design principle of the dielectric polymer composites operating at ambient temperature. The Al₂O₃‐ and HfO₂‐based PI composites with concomitantly large bandgap and moderate dielectric constants exhibit substantial improvement in the breakdown strength, discharged energy density, and charge–discharge efficiency when compared to the state‐of‐the‐art dielectric polymers. The work provides a design paradigm for high‐performance dielectric polymer nanocomposites for electrical energy storage at elevated temperatures.     

Graphene‐Based Materials for Solar Cell Applications

Graphene has attracted increasing attention due to its unique electrical, optical, optoelectronic, and mechanical properties, which have opened up huge numbers of opportunities for applications. An overview of the recent research on graphene and its derivatives is presented, with a particular focus on synthesis, properties, and applications in solar cells.     

Gum‐Like Nanocomposites as Conformable,Conductive, and Adhesive Electrode Matrix for Energy Storage Devices

The electrodes in energy storage devices, such as lithium/sodium ion batteries, are typical multicomponent system consisting of inorganic electrode particles, polymer binders, conductive fillers, current collectors, and other components. These components are usually porously combined by a polymeric binder to accomplish the required electrochemical functions. In spite of the great success, this classic porous configuration faces serious issues in mechanical stability and flexibility due to weak and instable structures/interfaces. Here, by learning from polymeric nanocomposites, a concept of electrode matrix is proposed based on a gum‐like nanocomposite, a dual‐conductive adhesive. As an electrode matrix, the gum‐like nanocomposite integrates the functions of binder, electrolyte, and conductive fillers. In particular, it shows strong adhesion, high electrical/ionic conductivities, and appropriate mechanical and self‐healing properties. Finally, it is demonstrated that, with the electrode matrix, battery electrodes can be fabricated into nonporous composite showing not only excellent mechanical flexibility/stability but also improved electrochemical performance when working with a gum‐like electrolyte.     

Recent Advances in Rechargeable Magnesium‐Based Batteries for High‐Efficiency Energy Storage

Benefiting from higher volumetric capacity, environmental friendliness and metallic dendrite‐free magnesium (Mg) anodes, rechargeable magnesium batteries (RMBs) are of great importance to the development of energy storage technology beyond lithium‐ion batteries (LIBs). However, their practical applications are still limited by the absence of suitable electrode materials, the sluggish kinetics of Mg²⁺ insertion/extraction and incompatibilities between electrodes and electrolytes. Herein, a systematic and insightful review of recent advances in RMBs, including intercalation‐based cathode materials and conversion reaction‐based compounds is presented. The relationship between microstructures with their electrochemical performances is comprehensively elucidated. In particular, anode materials are discussed beyond metallic Mg for RMBs. Furthermore, other Mg‐based battery systems are also summarized, including Mg–air batteries, Mg–sulfur batteries, and Mg–iodine batteries. This review provides a comprehensive understanding of Mg‐based energy storage technology and could offer new strategies for designing high‐performance rechargeable magnesium batteries.     

Graphene‐Based Organic Electrochemical Capacitors for AC Line Filtering

Less‐defective graphene oxide sheets with a small average size of 0.7 µm are electrochemically reduced to form a hydrogel film with highly oriented porous structure. It is applied as the electrode of organic electrochemical capacitor (OEC) after solvent change with organic electrolyte and deep reduction in this organic medium. At 120 Hz, the typical OEC exhibits a high areal specific energy density of 472 µF V² cm^?2 with a wide workable voltage window of 2.5 V, a phase angle of ?80.5°, a resistor‐capacitor time constant (τ_RC) of 0.219 ms, and an excellent electrochemical stability. Thus, it is promising to replace aluminum electrolytic capacitors for AC line filtering. Furthermore, two identical OECs connected in series keep the performance of single device, making them practically applicable in electronics.     

Multiscale Graphene‐Based Materials for Applications in Sodium Ion Batteries

Scrupulous design and smart hybridization of bespoke electrode materials are of great importance for the advancement of sodium ion batteries (SIBs). Graphene‐based nanocomposites are regarded as one of the most promising electrode materials for SIBs due to the outstanding physicochemical properties of graphene and positive synergetic effects between graphene and the introduced active phase. In this review, the recent progress in graphene‐based electrode materials for SIBs with an emphasis on the electrode design principle, different preparation methods, and mechanism, characterization, synergistic effects, and their detailed electrochemical performance is summarized. General design rules for fabrication of advanced SIB materials are also proposed. Additionally, the merits and drawbacks of different fabrication methods for graphene‐based materials are briefly discussed and summarized. Furthermore, multiscale forms of graphene are evaluated to optimize electrochemical performance of SIBs, ranging from 0D graphene quantum dots, 2D vertical graphene and reduced graphene oxide sheets, to 3D graphene aerogel and graphene foam networks. To conclude, the challenges and future perspectives on the development of graphene‐based materials for SIBs are also presented.     

MoS2‐Based All‐Purpose Fibrous Electrode and Self‐Powering Energy Fiber for Efficient Energy Harvesting and Storage

Here an all‐purpose fibrous electrode based on MoS₂ is demonstrated, which can be employed for versatile energy harvesting and storage applications. In this coaxial electrode, ultrathin MoS₂ nanofilms are grown on TiO₂ nanoparticles coated carbon fiber. The high electrochemical activity of MoS₂ and good conductivity of carbon fiber synergistically lead to the remarkable performances of this novel composite electrode in fibrous dye‐sensitized solar cells (showing a record‐breaking conversion efficiency of 9.5%) and high‐capacity fibrous supercapacitors. Furthermore, a self‐powering energy fiber is fabricated by combining a fibrous dye‐sensitized solar cell and a fibrous supercapacitor into a single device, showing very fast charging capability (charging in 7 s under AM1.5G solar illumination) and an overall photochemical‐electricity energy conversion efficiency as high as 1.8%. In addition, this wire‐shaped electrode can also be used for fibrous Li‐ion batteries and electrocatalytic hydrogen evolution reactions. These applications indicate that the MoS₂‐based all‐purpose fibrous electrode has great potential for the construction of high‐performance flexible and wearable energy devices.     

Graphene‐Containing Nanomaterials for Lithium‐Ion Batteries

Graphene‐containing nanomaterials have emerged as important candidates for electrode materials in lithium‐ion batteries (LIBs) due to their unique physical properties. In this review, a brief introduction to recent developments in graphene‐containing nanocomposite electrodes and their derivatives is provided. Subsequently, synthetic routes to nanoparticle/graphene composites and their electrochemical performance in LIBs are highlighted, and the current state‐of‐the‐art and most recent advances in the area of graphene‐containing nanocomposite electrode materials are summarized. The limitations of graphene‐containing materials for energy storage applications are also discussed, with an emphasis on anode and cathode materials. Potential research directions for the future development of graphene‐containing nanocomposites are also presented, with an emphasis placed on practicality and scale‐up considerations for taking such materials from benchtop curiosities to commercial products.     

Fast Li Storage in MoS2‐Graphene‐Carbon Nanotube Nanocomposites: Advantageous Functional Integration of 0D, 1D,and 2D Nanostructures

A 3D porous composite consisting of nano‐0D MoS₂, nano‐1D carbon nanotubes (CNTs), and nano‐2D graphene is successful prepared using an electrostatic spray deposition (ESD) technique. Depending on the preparation procedure either nanodots of amorphous MoS₂ (0.5–5 nm) or nanocrystalline few‐layered MoS₂ (5–10 nm) bonded to graphene‐carbon nanotubes backbone are obtained. These functionalized carbon nanotubes adhere to a porous graphene‐based network. Such composites can be directly ­deposited on the current collectors without any binder or conductive additives to assemble a battery that shows superior rate performance and cycling ­stability. For nanodots, nucleation and diffusion issues usually connected with ­conversion are largely mitigated if not totally nullified. The use of mechanically and diffusionally isolated but electrochemically well connected electroactive nanodots offer an effective solution to render conversion reaction reversible. The use of nano‐1D and nano‐2D carbon structures offer additional electrical and mechanical advantages that are discussed. Furthermore, this technique, which is easily extendable to other electrode materials, seems to be of a great potential, especially for thin‐film batteries, flexible batteries, and future ­paintable batteries.     

Graphene–Polymer Nanocomposite‐Based Redox‐Induced Electricity for Flexible Self‐Powered Strain Sensors

Graphene as a powerful inorganic material such as excellent conductivity and ideal mechanical strength has recently been extensively utilized to develop flexible strain sensors. However, graphene‐based strain sensors usually suffer from the deficiencies of stretchability, sensitivity, and sensing range, which can restrict their applications in wearable devices. Here, a novel strain sensor is designed by integrating graphene/ecoflex film and meandering zinc wire into the flexible base. The constructed strain sensor not only possesses high stretchability of up to 150% strain but can also self‐generates current signals from redox‐induced electricity, where the stable current and voltage signals of about 75 µA and 0.83 V can be obtained, respectively. Furthermore, the self‐powered sensor presents a broad and linear sensing range of 25% to 150% strains and a fast response time of less than 0.11 s. Attached on human body, the sensor has been utilized to realize the motion detection of knee joint.     

Structure Design and Composition Engineering of Carbon‐Based Nanomaterials for Lithium Energy Storage

Carbon‐based nanomaterials have significantly pushed the boundary of electrochemical performance of lithium‐based batteries (LBs) thanks to their excellent conductivity, high specific surface area, controllable morphology, and intrinsic stability. Complementary to these inherent properties, various synthetic techniques have been adopted to prepare carbon‐based nanomaterials with diverse structures and different dimensionalities including 1D nanotubes and nanorods, 2D nanosheets and films, and 3D hierarchical architectures, which have been extensively applied as high‐performance electrode materials for energy storage and conversion. The present review aims to outline the structural design and composition engineering of carbon‐based nanomaterials as high‐performance electrodes of LBs including lithium‐ion batteries, lithium–sulfur batteries, and lithium–oxygen batteries. This review mainly focuses on the boosting of electrochemical performance of LBs by rational dimensional design and porous tailoring of advanced carbon‐based nanomaterials. Particular attention is also paid to integrating active materials into the carbon‐based nanomaterials, and the structure–performance relationship is also systematically discussed. The developmental trends and critical challenges in related fields are summarized, which may inspire more ideas for the design of advanced carbon‐based nanostructures with superior properties.     

Rational Design of Nickel Hydroxide‐Based Nanocrystals on Graphene for Ultrafast Energy Storage

Compact, light, and powerful energy storage devices are urgently needed for many emerging applications; however, the development of advanced power sources relies heavily on advances in materials innovation. Here, the findings in rational design, one‐pot synthesis, and characterization of a series of Ni hydroxide‐based electrode materials in alkaline media for fast energy storage are reported. Under the guidance of density functional theory calculations and experimental investigations, a composite electrode composed of Co‐/Mn‐substituted Ni hydroxides grown on reduced graphene oxide (rGO) is designed and prepared, demonstrating capacities of 665 and 427 C g^?1 at current densities of 2 and 20 A g^?1, respectively. The superior performance is attributed mainly to the low deprotonation energy and the facile electron transport, as elaborated by theoretical calculations. When coupled with an electrode based on organic molecular‐modified rGO, the resulting hybrid device demonstrates an energy density of 74.7 W h kg^?1 at a power density of 1.68 kW kg^?1 while maintaining capacity retention of 91% after 10,000 cycles (20 A g^?1). The findings not only provide a promising electrode material for high‐performance hybrid capacitors but also open a new avenue toward knowledge‐based design of efficient electrode materials for other energy storage applications.     

Integrated Intercalation‐Based and Interfacial Sodium Storage in Graphene‐Wrapped Porous Li4Ti5O12 Nanofibers Composite Aerogel

Sodium storage in both solid–liquid and solid–solid interfaces is expected to extend the horizon of sodium‐ion batteries, leading to a new strategy for developing high‐performance energy‐storage materials. Here, a novel composite aerogel with porous Li₄Ti₅O₁₂ (PLTO) nanofibers confined in a highly conductive 3D‐interconnected graphene framework (G‐PLTO) is designed and fabricated for Na storage. A high capacity of 195 mA h g^?1 at 0.2 C and super‐long cycle life up to 12 000 cycles are attained. Electrochemical analysis shows that the intercalation‐based and interfacial Na storage behaviors take effect simultaneously in the G‐PLTO composite aerogel. An integrated Na storage mechanism is proposed. This study ascribes the excellent performance to the unique structure, which not only offers short pathways for Na⁺ diffusion and conductive networks for electron transport, but also guarantees plenty of PLTO–electrolyte and PLTO–graphene interfacial sites for Na⁺ adsorption.     

Phase Boundary Derived Pseudocapacitance Enhanced Nickel‐Based Composites for Electrochemical Energy Storage Devices

Several strategies have been employed to improve the performance of energy storage devices through the development of new electrode materials. The construction of transition metal compound composite electrodes plays an important role in promoting the performance of energy storage devices. However, understandings of and insight into how to enhance the composites properties are rarely reported. Taking nickel‐based compounds as an example, Ni₃N@Ni₃S₂ hybrid nanosheets are reported as a high‐performance anode material for lithium‐ion batteries that delivers higher lithium storage properties than the pristine Ni₃N and Ni₃S₂ electrodes. This demonstrates that the phase boundaries between the Ni₃N and Ni₃S₂ may contribute additional lithium storage, which leads to a synergistic effect via the high pseudocapacitance contribution from the outstanding conductivity of Ni₃N and enhanced diffusion‐controlled capacity of Ni₃S₂. The use of composites prepared through sulfuration of hydrothermally annealed nickel hydroxide‐based precursor provides an enhancement of the energy storage properties. These results provide an important approach for increasing the electrochemical activity of composites by the combined effect of interfacial mismatch and pseudocapacitance, as well as understandings of the mechanism of the enhancement of the composite electrode properties.     

Mulberry Paper‐Based Supercapacitor Exhibiting High Mechanical and Chemical Toughness for Large‐Scale Energy Storage Applications

In response to the demand for flexible and sustainable energy storage devices that exhibit high electrochemical performance, a supercapacitor system is fabricated using mulberry tree‐derived paper as a substrate and Poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS) and carbon black as the active material. The mulberry paper‐based supercapacitor system demonstrates high energy density of 29.8–39.8 Wh kg^?1 and power density of 2.8–13.9 kW kg^?1 with 90.7% retention of its initial capacity over 15 000 charge–discharge cycles. In addition, the mulberry tree fibers are known to have superior mechanical strength and toughness and the mulberry paper‐based supercapacitor; as a result, exhibit high mechanical and chemical toughness; 99% of its initial capacity is retained after 100 repeated applications of bending strains, and twisting. 94% capacity retention is observed even after exposure to HCl and H₂SO₄ acid solutions. The fabrication methodology of the mulberry‐based supercapacitor is highly scalable and could be stacked to increase the energy storage capacity, where operation of light‐emitting diode lights with a drive voltage of 12 V integrated in a wearable device is demonstrated.