Prevention of marine biofouling using a conductive paint electrode

Conductive paint electrode was used for marine biofouling on fishing nets by electrochemical disinfection. When a potential of 1.2 V vs. a saturated calomel electrode (SCE) was applied to the conductive paint electrode, Vibrio alginolyticus cells attached on the electrode were completely killed. By applying a negative potential, the attached cells were removed from the surface of the electrode. Changes in pH and chlorine concentration were not observed at potentials in the range -0.6 approximately 1.2 V vs. SCE. In a field experiment, accumulation of the bacterial cells and formation of biofilms on the electrode were prevented by application of an alternating potential, and 94% of attachment of the biofouling organisms was inhibited electrically on yarn used for fishing net coated with conductive paint. Copyright 1998 John Wiley & Sons, Inc.     

Electrochemical prevention of marine biofouling on a novel titanium-nitride-coated plate formed by radio-frequency arc spraying

We have developed a new method for forming titanium-nitride(TiN)-coated plates using radio-frequency arc spraying (RFAS). A TiN coating formed by RFAS has been used for electrochemical prevention of marine biofouling. X-ray diffraction and X-ray photoelectron spectroscopy indicate that a TiN composite film containing Ti was formed on a polyethylene terephthalate plate surface when Ti was sprayed by RFAS under atmospheric pressure. A cyclic voltammogram (scan rate 20 mV/s) of the TiN formed by RFAS revealed no oxidative and reductive peak currents in the range −0.6 V to 1.2 V against a saturated silver/silver chloride (Ag/AgCl) electrode. When a potential of 1.0 V against Ag/AgCl was applied to the electrode in seawater, no dissolved Ti was detected. Changes in pH and the chlorine concentration were not observed in this range. In all, only 4.5% of the Vibrio alginolyticus cells attached to the electrode survived when a potential of 0.8 V against Ag/AgCl was applied in seawater for 30 min. In field experiments, attachment of the organisms to the TiN electrode was inhibited by applying an alternating potential of 1.0 V and −0.6 V against Ag/AgCl. The TiN film can be formed by RFAS on large and intricately shaped surfaces, and it is a practical electrode for the electrochemical prevention of fouling of various marine structures. Received: 17 April 1998 / Received revision: 5 June 1998 / Accepted: 19 June 1998     

Disinfection of drinking water by using a novel electrochemical reactor employing carbon-cloth electrodes.

A novel electrochemical reactor employing carbon-cloth electrodes was constructed for disinfection of drinking water. Escherichia coli K-12 (10(2) cells per cm3) was sterilized when a cell suspension was passed through the reactor at a dilution rate of 6.0 h-1, and a potential of 0.7 V versus a saturated calomel electrode was applied to an electrode. The survival ratio increased with increasing dilution rate but was less than 0.1% at dilution rates of less than 6.0 h-1. Although the survival ratio increased with increasing cell concentration above 10(3) cells per cm3, the disinfection rate also increased. The disinfection rate was 6.0 x 10(2) cells per cm3 per h at a cell concentration of 10(2) cells per cm3. Continuous sterilization of E. coli cells was carried out for 24 h. Sterilization is based on an electrochemical reaction between the electrode and the cell which is mediated by intracellular coenzyme A. Sterilization of drinking water by using this reactor was successfully performed, demonstrating the potential of such a reactor for clean and efficient water purification.     

Disinfection of drinking water by using a novel electrochemical reactor employing carbon-cloth electrodes.

A novel electrochemical reactor employing carbon-cloth electrodes was constructed for disinfection of drinking water. Escherichia coli K-12 (10(2) cells per cm3) was sterilized when a cell suspension was passed through the reactor at a dilution rate of 6.0 h-1, and a potential of 0.7 V versus a saturated calomel electrode was applied to an electrode. The survival ratio increased with increasing dilution rate but was less than 0.1% at dilution rates of less than 6.0 h-1. Although the survival ratio increased with increasing cell concentration above 10(3) cells per cm3, the disinfection rate also increased. The disinfection rate was 6.0 x 10(2) cells per cm3 per h at a cell concentration of 10(2) cells per cm3. Continuous sterilization of E. coli cells was carried out for 24 h. Sterilization is based on an electrochemical reaction between the electrode and the cell which is mediated by intracellular coenzyme A. Sterilization of drinking water by using this reactor was successfully performed, demonstrating the potential of such a reactor for clean and efficient water purification.     

Preparation of a colored conductive paint electrode for electrochemical inactivation of bacteria

In this study we describe the preparation of a colored conductive paint electrode containing In(2)O(3), SnO(2), or TiO(2) for the electrochemical inactivation of marine bacteria. When each colored conductive paint electrode was immersed in seawater containing 10(6) cells/mL for 90 min, marine microbe attachment to the TiO(2)/SnO(2)/Sb electrode surface was minimal. Preparation of electrodes coated with 40% particles is shown to be more cost-effective, and because of their more translucent coatings they can be painted over with bright colors. When a potential of 1.0 V was applied for 30 min to the colored conductive paint electrode (40 wt% TiO(2)/SnO(2)/Sb) in sterile seawater, the survival ratio decreased to 55%. When 1.5 V vs. saturated calomel electrode (SCE) was applied, all attached cells were inactivated. Chlorine was not detected below an applied potential of 1.5 V. A change in pH was not observed in the range of 0 to 1.5 V. This method might be effective for preventing bacterial cell accumulation and the formation of biofilms.     

Electrochemically induced oxidative damage to double-stranded calf thymus DNA adsorbed on gold electrodes

Electrochemically induced oxidative damage to DNA was studied with double-stranded calf thymus DNA immobilized directly on a gold electrode surface. Pre-polarization of the DNA-modified electrodes at +0.5 V versus Ag/AgCl reference electrode, in a free from DNA blank buffer solution, pH 7.4, allowed for subsequent detection of direct electrochemical oxidation of adsorbed on gold DNA, in the potential range from +0.7 to +0.8 V. The redox potential of the process corresponded to the potentials of the oxidation of guanine bases in DNA. It is shown that with increasing potential scan rate, v, the mechanism of electrochemical oxidation of DNA changes from the irreversible 4e^– oxidative damage of DNA at low v to reversible 1e^– oxidation at high v, keeping the electrochemical activity of the adsorbed DNA layer virtually the same.     

Fluorometric observation of viable and dead adhering diatoms using TO-PRO-1 iodide and its application to the estimation of electrochemical treatment

A rapid method for the direct measurement of viable and dead adhering diatoms was developed using a fluorescent dye, TO-PRO-1 iodide. By staining the marine diatom, Nitzchia closterium, with TO-PRO-1 iodide, viable and dead cells were identified as red and yellow cells respectively, under an epifluorescence microscope employing blue excitation. Only dead cells were stained with TO-PRO-1 iodide. Viable cells were observed as red because of autofluorescence arising from intracellular chlorophyll, whereas dead cells were observed as yellow because of the fluorescence of TO-PRO-1 iodide. The percentage of TO-PRO-1-iodide-stained was correlated with the percentage of dead cells in N. closterium cells exposed to heat (60 °C, 15 min). Other microalgae containing intracellular chlorophyll could be also distinguished as viable or dead cells by this fluorometric staining method. This method was applied for the assessment of N. closterium cells killed by the electrochemical treatment and used to monitor biofouling populations and their viability directly on the electrode surface. When 1.0 V was applied against a saturated calomel electrode, 99% of the cells attached to graphite electrode were killed in 1 h. Received: 7 August 1998 / Received revision: 16 October 1998 / Accepted: 7 November 1998     

Characterization and optimization of a two-phase partitioning bioreactor for the biodegradation of phenol

An electrochemical reactor employing activated carbon fibers (ACF) was constructed for the disinfection of bacteria in drinking water. The application of an alternating potential of 1.0 V and −0.8 V versus a saturated calomel electrode, for disinfecting and desorbing bacteria, enabled reactor operation for 840 h. Drinking water was passed through the reactor in stop/flow mode: 300 ml/min flow for 12 h and no flow for 12 h, alternately. The bacterial cell density in treated water was always been less than 20 cells/ml. It was also found that the formation of biofilm on the ACF reactor caused an increase in current, enabling the self-detection of microbial fouling. Received: 19 February 1996 / Received last revision: 23 July 1996 / Accepted: 2 September 1996     

Electrochemical classification of gram-negative and gram-positive bacteria

Intestinal bacteria were classified as gram-positive or gram-negative by an electrode system with a basal plane pyrolytic graphite electrode and a porous nitrocellulose membrane filter to trap bacteria. When the potential of the graphite electrode was run in the range of 0 to 1.0 V versus the saturated calomel electrode (SCE), gram-positive bacteria gave peak currents at 0.65 to 0.69 V versus the SCE. The peak potentials of gram-negative bacteria were 0.70 to 0.74 V versus the SCE. Gram-negative bacteria and gram-positive bacteria were also classified based on the ratio of the second peak current to the first peak current when the potential cycle was repeated twice. The numbers of cells on the membrane filter were determined from the peak currents. It was found that the peak currents result from the electrochemical oxidation of coenzyme A in the cells of Escherichia coli and Lactobacillus acidophilus.     

Electrochemical disinfection of bacteria in drinking water using activated carbon fibers

A novel electrochemical reactor employing activated carbon fiber (ACF) electrodes was constructed for disinfecting bacteria in drinking water. Escherichia coli adsorbed preferentially onto ACF rather than to carbon-cloth or granular-activated carbon. E. coli cells, which adsorbed onto the ACF, were killed electrochemically when a potential of 0.8 V vs. a saturated calomel electrode (SCE) was applied. Drinking water was passed through the reactor in stop-flow mode: 2mL/min for 12 h, o L/min for 24 h, and 1 mL/min for 6 h. At an applied potential of 0.8 V vs, SCE, viable cell concentration reamined below 30 cells/mL. In the absence of an applied potential, bacteria grew to a maximum concentration of 9.5 x 10(3) cells/mL. After continuous operation at 0.8 V vs. SCE, cells adsorbed onto the ACF could not be observed by scanning electron microscopy. In addition, chlorine in drinking water was completely removed by the reactor. Therefore, clean and efficient inactivation of bacteria in drinking water was successfully performed. (c) 1994 John Wiley & Sons, Inc.     

Disinfection of Microorganisms by Use of Electrochemically Regenerated Periodate

A new method for disinfection of microorganisms by electrochemically regenerated periodate was developed. Oxidation of iodate to periodate was observed at 1.25 V versus a silver/silver chloride electrode in a cyclic voltammogram of potassium iodate. When 1.25 V was applied in 1.0 mM potassium iodate, approximately 4-log inactivation of Escherichia coli was observed in 30 min.     

Silver electrodeposition catalyzed by colloidal gold on carbon paste electrode: application to biotin–streptavidin interaction monitoring

A new electrochemical method to monitor biotin–streptavidin interaction on carbon paste electrode, based on silver electrodeposition catalyzed by colloidal gold, was investigated. Silver reduction potential changed when colloidal gold was attached to an electrode surface through the biotin–streptavidin interaction. Thus, the direct reduction of silver ions on the electrode surface could be avoided and therefore, they were only reduced to metallic silver on the colloidal gold particle surface, forming a shell around these particles. When an anodic scan was performed, this shell of silver was oxidized and an oxidation process at +0.08 V was recorded in NH₃ 1.0 M. Biotinylated albumin was adsorbed on the pretreated electrode surface. This modified electrode was immersed in colloidal gold-streptavidin labeled solutions. The carbon paste electrode was then activated in adequate medium (NaOH 0.1 M and H₂SO₄ 0.1 M) to remove proteins from the electrode surface while colloidal gold particles remained adsorbed on it. Then, a silver electrodeposition at −0.18 V for 2 min and anodic stripping voltammetry were carried out in NH₃ 1.0 M containing 2.0×10⁻⁵ M of silver lactate. An electrode surface preparation was carried out to obtain a good reproducibility of the analytical signal (5.3%), using a new electrode for each experiment. In addition, a sequential competitive assay was carried out to determine streptavidin. A linear relationship between peak current and logarithm of streptavidin concentration from 2.25×10⁻¹⁵ to 2.24×10⁻¹² M and a limit of detection of 2.0×10⁻¹⁵ M were obtained.     

In vitro electrochemical detection of wheat allergen using rat basophilic leukaemia (RBL-1) cells

We have investigated an electrochemical method of detecting foods that cause an allergic reaction. Rat basophilic leukaemia (RBL-1) cells were sensitized with serum from a rat that was allergic to wheat. A sample containing the protein fraction of a food was added to the cells and incubated. The cells were immobilized on a membrane filter and attached to a basalplane pyrolytic graphite electrode. When a potential was applied in the range 0–1.0 V relative to a saturated calomel electrode, an anodic peak current appeared at around 0.33 V. This peak current, attributed to serotonin, increased with time, and the maximum current (0.5 A) was obtained 20–25 min of incubation. The response of the RBL-1 cells was specific to the protein fraction of wheat. The peak current increased linearly with increasing protein concentration in the range of 0.01–0.5 g ml^–1. These results suggest that the concentration of the protein bringing about the allergic reaction can be determined by cyclic voltammetry within 25 min. This method is more sensitive than the conventional skin tests.     

Direct Electrochemical Immunoassay Based on Immobilization of Protein-Magnetic Nanoparticle Composites on to Magnetic Electrode Surfaces by Sterically Enhanced Magnetic Field Force

A direct electrochemical immunoassay system based on the immobilization of α-1-fetoprotein antibody (anti-AFP), as a model system, on the surface of core-shell Fe₂O₃/Au magnetic nanoparticles (MNP) has been demonstrated. To fabricate such an assay system, anti-AFP was initially covalently immobilized on to the surface of core-shell Fe₂O₃/Au MNP. Anti-AFP-modified MNP (bio-nanoparticles) were then attached to the surface of carbon paste electrode with the aid of a permanent magnet. The performance and factors influencing the performance of the resulting immunosensor were studied. α-1-Fetoprotein antigen was directly determined by the change in current or potential before and after the antigen–antibody reaction versus saturated calomel electrode. The electrochemical immunoassay system reached 95% of steady-state potential within 2 min and had a sensitivity of 25.8 mV. The linear range for AFP determination was from 1 to 80 ng AFP ml⁻¹ with a detection limit of 0.5 ng AFP ml⁻¹. Moreover, the direct electrochemical immunoassay system, based on a functional MNP, can be developed further for DNA sensor and enzyme biosensor. Revisions requested 2 November 2005; Revisions received 17 January 2006     

Electricity Production by Geobacter sulfurreducens Attached to Electrodes

Previous studies have suggested that members of the Geobacteraceae can use electrodes as electron acceptors for anaerobic respiration. In order to better understand this electron transfer process for energy production, Geobacter sulfurreducens was inoculated into chambers in which a graphite electrode served as the sole electron acceptor and acetate or hydrogen was the electron donor. The electron-accepting electrodes were maintained at oxidizing potentials by connecting them to similar electrodes in oxygenated medium (fuel cells) or to potentiostats that poised electrodes at +0.2 V versus an Ag/AgCl reference electrode (poised potential). When a small inoculum of G. sulfurreducens was introduced into electrode-containing chambers, electrical current production was dependent upon oxidation of acetate to carbon dioxide and increased exponentially, indicating for the first time that electrode reduction supported the growth of this organism. When the medium was replaced with an anaerobic buffer lacking nutrients required for growth, acetate-dependent electrical current production was unaffected and cells attached to these electrodes continued to generate electrical current for weeks. This represents the first report of microbial electricity production solely by cells attached to an electrode. Electrode-attached cells completely oxidized acetate to levels below detection (<10 μM), and hydrogen was metabolized to a threshold of 3 Pa. The rates of electron transfer to electrodes (0.21 to 1.2 μmol of electrons/mg of protein/min) were similar to those observed for respiration with Fe(III) citrate as the electron acceptor (E^o′ =+0.37 V). The production of current in microbial fuel cell (65 mA/m² of electrode surface) or poised-potential (163 to 1,143 mA/m²) mode was greater than what has been reported for other microbial systems, even those that employed higher cell densities and electron-shuttling compounds. Since acetate was completely oxidized, the efficiency of conversion of organic electron donor to electricity was significantly higher than in previously described microbial fuel cells. These results suggest that the effectiveness of microbial fuel cells can be increased with organisms such as G. sulfurreducens that can attach to electrodes and remain viable for long periods of time while completely oxidizing organic substrates with quantitative transfer of electrons to an electrode.     

Detection of human leucocytes by cyclic voltammetry and its application to monitoring of allergic reaction

Cyclic voltammetry was applied to the detection of human leucocytes and the monitoring of allergic reactions. A basal plane pyrolytic graphite electrode with attached leucocytes on a porous nitrocellulose membrane filter was employed as a working electrode. An anodic peak current appeared at 0.33 V versus the saturated calomel electrode (SCE) when the potential of the working electrode was scanned in the range of 0-1.0 V versus SCE. This peak current was attributed to the electrochemical oxidation of serotonin. When egg white was added to leucocytes obtained from patients who were allergic to egg, the peak current decreased owing to degranulation of leucocytes leading to serotonin release. The peak current decreased with increasing allergen concentration in the range of 5-50 micrograms ml-1. Leucocytes did not respond to other allergens such as soybean, milk and dinitrophenylated bovine serum albumin (DNP-BSA).     

Disinfection of microorganisms by use of electrochemically regenerated periodate

A new method for disinfection of microorganisms by electrochemically regenerated periodate was developed. Oxidation of iodate to periodate was observed at 1.25 V versus a silver/silver chloride electrode in a cyclic voltammogram of potassium iodate. When 1.25 V was applied in 1.0 mM potassium iodate, approximately 4-log inactivation of Escherichia coli was observed in 30 min.     

Cu3P Binary Phosphide: Synthesis via a Wet Mechanochemical Method and Electrochemical Behavior as Negative Electrode Material for Lithium‐Ion Batteries

Mechanochemical synthesis of Cu₃P in the presence of n‐dodecane results in a material with a secondary particle size distribution of 10 μm, secondary particles which consist of homogeneously agglomerated 20 nm primary particles. The electrochemical performance of Cu₃P with lithium is influenced by the reaction depth, in other words by the lower potential cut‐off. During the electrochemical reaction, the displacement of copper by lithium from the Cu₃P structure until the formation of Li₃P and Cu deteriorates the capacity retention. Improved performance was obtained when the charge potential was limited to 0.50 V (vs. Li/Li⁺) and the formation of the Li_xCu_3‐xP phase (0 ≤ × ≤ 2). In this case, when the potential is limited to 0.5 V, the capacity is stable for more than 50 cycles. Acceptable electrochemical performances in Li‐ion cells within the voltage range 0.50–2.0 V (vs. Li/Li⁺) were shown when Cu₃P was used as an anode and Li_1.2(Ni_0.13Mn_0.54Co_0.13)O₂ and LiNi_0.5Mn_1.5O₄ as positive electrode materials.     

Isotherm for Adsorption of Agrobacterium tumefaciens to Susceptible Potato (Solanum tuberosum L.) Tissues

Potato tuber disks were submerged in suspensions containing 10¹ to 10⁹ cells of Agrobacterium tumefaciens B6 per ml. After 60 min, the disks were rinsed and homogenized, and portions of the homogenates were plated to measure the number of adsorbed bacteria. At low initial bacterial concentrations (10⁵/ml), 5 to 23% of the bacteria adsorbed. At higher bacterial concentrations, the corresponding value was approximately 1.2%. Adsorption was a reversible equilibrium process. Binding saturation was not achieved, and adsorbed bacteria were confined to monolayers on the surfaces of tissue prepared for scanning electron microscopy. Adsorption of strain B6 to potato tuber tissues is described accurately by the Freundlich adsorption isotherm and may be a nonspecific phenomenon.     

Electrochemical Stiffness Changes in Lithium Manganese Oxide Electrodes

In situ strain and stress measurements are performed on composite electrodes to monitor potential‐dependent stiffness changes in lithium manganese oxide (LiMn₂O₄). Lithium insertion and removal results in asynchronous strain and stress generation in the electrode. Electrochemical stiffness changes are calculated by combining coordinated stress and strain measurements. The electrode experiences dramatic changes in electrochemical stiffness due to potential‐dependent Li⁺ ion intercalation mechanisms. The development of stress in the early stages of delithiation (at ≈3.95 V) due to a kinetic barrier at the electrode surface gives rise to stiffness changes in the electrode. Strain generation due to phase transformations reduces stiffness in the electrode at 4.17 V during delithiation and at 4.11 V during lithiation. During lithiation, stress generation due to Coulombic repulsions between occupied and incoming Li⁺ ions leads to stiffening of the electrode at 3.96 V. The electrode also experiences greater changes in stiffness during delithiation compared to lithiation. These changes in electrochemical stiffness provide insight into the interplay between mechanical and electrochemical properties which control electrode response to lithiation and delithiation.