A novel centrifugal impeller bioreactor. II. Oxygen transfer and power consumption

The effects of the impeller configuration, aeration rate, and agitation speed on oxygen transfer coefficient K(L)a were studied in a newly designed centrifugal impeller bioreactor (5-L). The oxygen transfer rates in the novel bioreactor were also compared with those in a cell-lift bioreactor with comparable dimensions. The cell-lift impeller produced much higher surface oxygen transfer rates than the centrifugal one at an agitation speed over 200 rpm. This result was in good agreement with our observation that the cell-lift impeller produced much higher unfavorable turbulence. In addition, the experiments using granulated agar particles as pseudo plant cells indicated that the K(L)a value decreased steadily with an increase in agar particle concentration, and the centrifugal impeller still demonstrated a larger K(L)a than the cell lift up to a high pseudo cell concentration of 19.5 g dry weight (DW)/L (under 150 rpm and 0.20 vvm) or 22.3 g DW/L (under 200 rpm and 0.20 vvm). Furthermore, the correlation between power number and impeller Reynolds number for both the centrifugal and the cell-lift impellers was successfully obtained, which could be used for predicting the power input required by each impeller. From the results obtained, the centrifugal impeller bioreactor is expected to have great potential in its application to shear-sensitive biological systems.     

Large-scale production of monoclonal antibodies in defined serum-free media in airlift bioreactors

Forty- and ninety-liter airlift bioreactors have been used successfully to grow hybridoma cell lines in chemically defined serum-free media. In the airlift bioreactor, hybridoma cell growth and monoclonal antibody productivity are comparable to that obtained by conventional cell culture. At sparging rates of 0.60-1.20 vvh (volume of sparged gas per bioreactor volume per hour), the airlift bioreactor achieves rapid mixing and adequate oxygen mass transfer. Foaming is minimal and inconsequential for serum-free media and media supplemented with 5%-10% fetal bovine serum. The use of serum-free medium facilitates monoclonal antibody purification and enhances the purity of the final MAb product.     

A perfusion system for antibody production by shear-sensitive hybridoma cells in a stirred reactor

Summary A shear-sensitive hybridoma cell line, incapable of growth or antibody production in spinner or shake flasks agitated at 40 rpm, was grown successfully in a perfusion propagation system consisting of a bioreactor (1.5 liter), stirred with a cell-lift impeller at 60 rpm, and a tangential flow filtration unit for removal of spent culture medium from the reactor. The culture was maintained over a 48 day period and cell numbers reached 1.8 × 10⁷ cells/ml. Maximal monoclonal antibody concentration was 800 ug/ml, indicating a productivity of 504 mg/day.     

Production and scale‐up of a monoclonal antibody against 17‐hydroxyprogesterone

The hybridoma 192 was used to produce a monoclonal antibody (MAb) against 17‐hydroxyprogesterone (17‐OHP), for possible use in screening for congenital adrenal hyperplasia (CAH). The factors influencing the MAb production were screened and optimized in a 2 L stirred bioreactor. The production was then scaled up to a 20 L bioreactor. All of the screened factors (aeration rate, stirring speed, dissolved oxygen concentration, pH, and temperature) were found to significantly affect production. Optimization using the response surface methodology identified the following optimal production conditions: 36.8°C, pH 7.4, stirring speed of 100 rpm, 30% dissolved oxygen concentration, and an aeration rate of 0.09 vvm. Under these conditions, the maximum viable cell density achieved was 1.34 ± 0.21 × 10⁶ cells mL^?1 and the specific growth rate was 0.036 ± 0.004 h^?1. The maximum MAb titer was 11.94 ± 4.81 μg mL^?1 with an average specific MAb production rate of 0.273 ± 0.135 pg cell^?1 h^?1. A constant impeller tip speed criterion was used for the scale‐up. The specific growth rate (0.040 h^?1) and the maximum viable cell density (1.89 × 10⁶ cells mL^?1) at the larger scale were better than the values achieved at the small scale, but the MAb titer in the 20 L bioreactor was 18% lower than in the smaller bioreactor. A change in the culture environment from the static conditions of a T‐flask to the stirred bioreactor culture did not affect the specificity of the MAb toward its antigen (17‐OHP) and did not compromise the structural integrity of the MAb. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2013     

A novel centrifugal impeller bioreactor. I. Fluid circulation, mixing, and liquid velocity profiles

A novel centrifugal impeller bioreactor for shear-sensitive biological systems was designed by installing a centrifugal-pumplike impeller in a stirred vessel. The fluid circulation, mixing, and liquid velocity profiles in the new bioreactor (5-L) were assessed as functions of the principal impeller designing and bioreactor operating parameters. The performances of the centrifugal impeller bioreactor were compared with those of a widely used cell-lift bioreactor. The newly developed bioreactor showed higher liquid lift capacity and shorter mixing time than the cell lift with comparable dimensions. Furthermore, the experiments of the liquid velocity profiles around an impeller region indicated that the centrifugal impeller bioreactor produced lower shear stress than the cell lift. This conclusion was also supported by evaluating the changes in size distributions of granulated agar particles that were sheared with those two types of impeller.     

Oxygen transport and cell viability in an annular flow bioreactor: comparison of laminar Couette and Taylor-vortex flow regimes

Rotating wall vessel bioreactors have been proposed as a means of controlling the fluid dynamic environment during long-term culture of mammalian cells and engineered tissues. In this study, we show how the delivery of oxygen to cells in an annular flow bioreactor is enhanced by the forced convective transport afforded by Taylor vortex flows. A fiberoptic oxygen probe with negligible lag time was used to measure the dissolved oxygen concentration in real time and under carefully controlled aeration conditions. From these data, the overall mass transfer coefficients were calculated and mass transport correlations determined under laminar Couette flow conditions and discrete Taylor vortex flow regimes, including laminar, wavy, and turbulent flows. While oxygen transport in Taylor vortex flows was significantly greater, and the available oxygen exceeded that consumed by murine fibroblasts in free suspension, the proportion of cells that remained viable decreased with increasing Reynolds number (101.8 < Rei < 1018), which we attribute to the action of fluid shear stresses on the cells as opposed to any limitation in mass transport. Nevertheless, the results of this study suggest that laminar Taylor-vortex flow regimes provide an effective means of maintaining the levels of oxygen transport required for long-term cell culture.     

Biological responses of hybridoma cells to hydrodynamic shear in an agitated bioreactor.

Effects of long-term hydrodynamic shear on hybridoma cells were investigated in a 250-ml continuous stirred-tank reactor (CSTR). Cells grown at steady state were subjected to step changes in agitation rates. Cell viability, glucose consumption, and monoclonal antibody (MAb) production were determined at high agitation rates and compared with the control (100 rev min-1). Impeller tip speeds higher than 40 cm s-1 caused a significant drop in cell concentration and respiration activity, and increased lactate dehydrogenase (LDH) release to the culture medium. Also, high agitation speeds caused a decrease in MAb concentration and an increase in specific glucose consumption rate. The effects of dilution rate and serum concentration on the sensitivity of hybridoma cells to hydrodynamic shear were determined. Serum was found to protect the cells against shear damage and had a significant positive effect on hybridoma growth and MAb production. Shear damage on cells in CSTR was approximated to first-order kinetics. The death rate constant increased sharply at impeller tip speeds above 40 cm s-1.     

Culture of photomixotrophic soybean and pine in a modified fermentor using a novel impeller

Photomixotrophic suspensions of Glycine max (soybean) and Pinus elliottii (slash pine) have been successfully cultured in a hybrid stirred tank photobioreactor using a novel cell-lift impeller. A cell-lift impeller exhibited cell viabilities over 90% and an average cell aggregate size of 1.0 mm or less. Flat-bladed turbines produced equivalent biomass to the cell-lift impeller, but cell viability was reduced (85%) and cell aggregate size increased (3-5 mm diameter). Maximum fresh weights of 82 g L(-1) (soybean) and 52 g L(-1) (slash pine) were achieved in 15 days using continuous lighting (90-100 muE m(-2) s(-1)) and supplemental 2% CO(2) inlet gas. Maximum biomass was achieved using an impeller speed of 60 rpm with air-flow rate of 0.2 vvm for the cell-lift impeller and the pair of flat bladed turbines. The lag and early exponential phases were characterized by (1) rapid hydrolysis of sucrose followed by preferential use of glucose and (2) a reduction in chlorophyll levels. Carbon dioxide (2%-5%) was an essential nutrient for photomixotrophic cell culture in the bioreactors.     

Gas transfer characteristics of a novel membrane bioreactor

We show the design features of a membrane bioreactor based on pulsatile flow across dimpled membranes. Results show an enhanced mass transfer of air of at least five-fold magnitude as compared with flat membranes. An increased working volume form 20 mL to 120 mL reduced the k(L)A at a given Reynolds number because of axial mixing of fluid from the deoxygenated end chamber. The bioreactor was used to supply air to a hybridoma mammalian cell line, and the calculated oxygen uptake showed that high-density cultures could be maintained in a 20mL, single-dimpled cultures could be maintained in a 20 mL, single-dimpled membrane system. Indirect aeration of a 2 L continuous stirred tank reactor, by a double-membrane system, showed that air could be supplied to mammalian cells at cell densities of approximately 4 x 10(6) /mL.     

A novel impeller configuration to improve fungal physiology performance and energy conservation for cephalosporin C production

Effects of impeller configuration on fungal physiology and cephalosporin C production were investigated by an industrial strain Acremonium chrysogenum in a 12m(3) bioreactor equipped with conventional and novel impeller configuration, respectively. The cell growth and oxygen uptake rate (OUR) profiles were little affected by the impeller configurations. However, differing impeller combinations significantly affected the morphology, which in turn influenced cephalosporin C production. Under the novel impeller configuration, the production of cephalosporin C was 10% higher and an excessive amount of dispersed arthrospores was also observed. Computational fluid dynamics (CFD) simulation further revealed that poor mass and energy exchange as well as inhomogeneous environment existed in the bioreactor equipped with conventional impeller configuration. For equivalent power dissipation, the volume oxygen transfer coefficient (K(L)a) could be enhanced by 15% compared with that of conventional impeller configuration. Power consumption was dramatically decreased by 25% by using novel impeller configuration.     

CFD of mixing of multi‐phase flow in a bioreactor using population balance model

Mixing in bioreactors is known to be crucial for achieving efficient mass and heat transfer, both of which thereby impact not only growth of cells but also product quality. In a typical bioreactor, the rate of transport of oxygen from air is the limiting factor. While higher impeller speeds can enhance mixing, they can also cause severe cell damage. Hence, it is crucial to understand the hydrodynamics in a bioreactor to achieve optimal performance. This article presents a novel approach involving use of computational fluid dynamics (CFD) to model the hydrodynamics of an aerated stirred bioreactor for production of a monoclonal antibody therapeutic via mammalian cell culture. This is achieved by estimating the volume averaged mass transfer coefficient (k_La) under varying conditions of the process parameters. The process parameters that have been examined include the impeller rotational speed and the flow rate of the incoming gas through the sparger inlet. To undermine the two‐phase flow and turbulence, an Eulerian‐Eulerian multiphase model and k‐ε turbulence model have been used, respectively. These have further been coupled with population balance model to incorporate the various interphase interactions that lead to coalescence and breakage of bubbles. We have successfully demonstrated the utility of CFD as a tool to predict size distribution of bubbles as a function of process parameters and an efficient approach for obtaining optimized mixing conditions in the reactor. The proposed approach is significantly time and resource efficient when compared to the hit and trial, all experimental approach that is presently used. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:613–628, 2016     

Effect of agitation rate and impeller design on oxygen transfer coefficients in small bioreactors using surface aeration

The effects of agitation rate and impeller type on the combined oxygen mass-transfer coefficient (kL a) in four different benchtop bioreactors have been examined. Surface oxygenation of a cell culture medium supplemented with fetal bovine serum and distilled deionized water has been studied by passing air through the bioreactor headspace at approximately one headspace volume per minute. A new ribbon-type impeller design using strips of Teflon has been shown to be superior to conventional impeller designs for oxygen transfer.     

Modified CelliGen-packed bed bioreactors for hybridoma cell cultures

This study describes two packed bed bioreactor configurations which were used to culture a mouse-mouse hybridoma cell line (ATCC HB-57) which produces an IgG₁ monoclonal antibody. The first configuration consists of a packed column which is continuously perfused by recirculating oxygenated media through the column. In the second configuration, the packed bed is contained within a stationary basket which is suspended in the vessel of a CelliGen^™ bioreactor. In this configuration, recirculation of the oxygenated media is provided by the CelliGen Cell Lift impeller. Both configurations are packed with disk carriers made from a non-woven polyester fabric. During the steady-state phase of continuous operation, a cell density of 10⁸ cells per cm³ of bed volume was obtained in both bioreactor configurations. The high levels of productivity (0.5 gram MAb per 1 of packed bed per day) obtained in these systems demonstrates that the culture conditions achieved in these packed bed bioreactors are excellent for the continuous propagation of hybridomas using media which contains low levels (1 %) of serum as well as serum-free media. These packed bed bioreactors allow good control of pH, dissolved oxygen and temperature. The media flows evenly over the cells and produces very low shear forces. These systems are easy to set up and operate for prolonged periods of time. The potential for scale-up using Fibra-cel carriers is enhanced due to the low pressure drop and low mass transfer resistance, which creates high void fraction approaching 90% in the packed bed.     

Descriptive parameter evaluation in mammalian cell culture

Several methods exist for assessing population growth and protein productivity in mammalian cell culture. These methods were critically examined here, based on experiments with two hybridoma cell lines. It is shown that mammalian cell culture parameters must be evaluated on the same basis. In batch culture mode most data is obtained on a cumulative basis (protein product titre, substrate concentration, metabolic byproduct concentration). A simple numerical integration technique can be employed to convert cell concentration data to a cumulative basis (cell-hours). The hybridoma lines used in this study included a nutritionally non-fastidious line producing low levels of MAb and a nutritionally fastidious hybridoma with high productivity. In both cases the cell-hour approach was the most appropriate means of expressing the relationship between protein productivity and cell population dynamics. The cell-hour approach could be used as the basis for all metabolic population parameter evaluations. This method has the potential to be used successfully for both prediction and optimization purposes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Expressions of mass transfer coefficients of bubbles and free surface of culture tanks using the <Emphasis Type="Italic">k</Emphasis>–ɛ turbulence model

For mammalian cell culture, getting a continuous supply of oxygen and extracting carbon dioxide are primary challenges even in the most modern biopharmaceutical manufacturing plants, due to the low oxygen solubility and excessive carbon dioxide accumulation. In addition, various independent flow and mass transfer characteristics in the culture tanks vessel make scale-up extremely difficult. One method for overcoming these and providing rational optimization is solving the fluid and mass transport equations by numerical simulation. To develop a simulation program, it is decisively important to know mass transfer coefficients of gaseous species in the culture tank. In this study, oxygen mass transfer coefficients are measured using a beaker with a sparger and impellers. In order to investigate the formulation of the mass transfer coefficients, the turbulent flow statistics is calculated by a CFD code for all cases, and the expressions of the mass transfer coefficients are established as functions of the statistics. Until now, the expression by Kawase is known in this field. This expression becomes a function only of energy dissipation rate epsilon. It does not coincide with the conventional experimental fact that mass transfer coefficient is proportional power 0.5 of impeller rotation speed. The new mass transfer coefficient is dependent on both of energy dissipation rate epsilon and turbulent flow energy k. It satisfies the relation of power of 0.5 of impeller rotation speed.     

机械搅拌式动物细胞反应器不同桨型组合的CFD数值模拟与优化

生物反应器已成为哺乳动物细胞生产治疗性抗体药物和疫苗的核心。文中采用CFD数值模拟方法对目前常用的机械搅拌式生物反应器在不同的搅拌形式下的流场进行了分析,获得了5种搅拌桨型组合条件下的速率矢量、持气率、含气率和剪切力分布的特征。通过构建的重组CHO细胞在不同搅拌形式条件下的流加分批培养发现,细胞密度和抗体表达水平与反应器内的最大剪切率直接相关,在FBMI3搅拌形式下细胞密度和抗体表达水平均最高。结果表明该CHO细胞在悬浮培养时对剪切环境比较敏感,且最大剪切力是工业规模放大的关键因素。     

Scale down of recombinant protein production: a comparative study of scaling performance

A large bioreactor is heterogeneous with respect to concentration gradients of substrates fed to the reactor such as oxygen and growth limiting carbon source. Gradient formation will highly depend on the fluid dynamics and mass transfer capacity of the reactor, especially in the area in which the substrate is added. In this study, some production-scale (12 m³ bioreactor) conditions of a recombinant Escherichia coli process were imitated on a laboratory scale. From the large-scale cultivations, it was shown that locally high concentration of the limiting substrate fed to the process, in this case glucose, existed at the level of the feedpoint. The large-scale process was scaled down from: (i) mixing time experiments performed in the large-scale bioreactor in order to identify and describe the oscillating environment and (ii) identification of two distinct glucose concentration zones in the reactor. An important parameter obtained from mixing time experiments was the residence time in the feed zone of about 10 seconds. The size of the feed zone was estimated to 10%. Based on these observations the scale-down reactor with two compartments was designed. It was composed of one stirred tank reactor and an aerated plug flow reactor, in which the effect of oscillating glucose concentration on biomass yield and acetate formation was studied. Results from these experiments indicated that the lower biomass yield and higher acetate formation obtained on a large scale compared to homogeneous small-scale cultivations were not directly caused by the cell response to the glucose oscillation. This was concluded since no acetate was accumulated during scale-down experiments. An explanation for the differences in results between the two reactor scales may be a secondary effect of high glucose concentration resulting in an increased glucose metabolism causing an oxygen consumption rate locally exceeding the transfer rate. The results from pulse response experiments and glucose concentration measurements, at different locations in the reactor, showed a great consistency for the two feeding/pulse positions used in the large-scale bioreactor. Furthermore, measured periodicity from mixing data agrees well with expected circulation times for each impeller volume. Conclusions are drawn concerning the design of the scale-down reactor.     

Computational fluid dynamics modeling of mass transfer behavior in a bioreactor for hairy root culture. I. Model development and experimental validation

A two-dimensional axisymmetric computational fluid dynamics (CFD) model based on a porous media model and a discrete population balance model was established to investigate the hydrodynamics and mass transfer behavior in an airlift bioreactor for hairy root culture.During the hairy root culture of Echinacea purpurea, liquid and gas velocity, gas holdup, mass transfer rate, as well as oxygen concentration distribution in the airlift bioreactor were simulated by this CFD model. Simulative results indicated that liquid flow and turbulence played a dominant role in oxygen mass transfer in the growth domain of the hairy root culture. The dissolved oxygen concentration in the hairy root clump increased from the bottom to the top of the bioreactor cultured with the hairy roots, which was verified by the experimental detection of dissolved oxygen concentration in the hairy root clump. This methodology provided insight understanding on the complex system of hairy root culture and will help to eventually guide the bioreactor design and process intensification of large-scale hairy root culture.     

Azadirachtin production in stirred tank reactors by Azadirachta indica suspension culture

Successful scale-up of Azadirachta indica suspension culture for azadirachtin production was done in stirred tank bioreactor with two different impellers. The kinetics of biomass accumulation, nutrient consumption and azadirachtin production of A. indica cell suspension culture were studied in a stirred tank bioreactor equipped with centrifugal impeller and compared with similar bioreactor with a setric impeller to investigate the role of O₂ transfer efficiency of centrifugal impeller bioreactor on overall culture metabolism. The maximum cell mass for centrifugal impeller bioreactor and stirred tank bioreactor (with setric impeller) were 18.7 and 15.5 g/L (by dry cell weight) and corresponding azadirachtin concentrations were 0.071 and 0.05 g/L, respectively. Glucose and phosphate were identified as the major growth-limiting nutrients during the bioreactor cultivation. The centrifugal impeller bioreactor demonstrated less shearing and improved O₂ transfer than the stirred tank bioreactor equipped with setric impeller with respect to biomass and azadirachtin production.     

Enhancement of glucose oxidase production in batch cultivation of recombinant Saccharomyces cerevisiae: optimization of oxygen transfer condition

AIMS: To obtain an optimal combination of agitation speed and aeration rate for maximization of specific glucose oxidase (GOD) production in recombinant Saccharomyces cerevisiae, and to establish a correlation between kLa vis-à-vis oxygen transfer condition and specific glucose oxidase production. METHODS AND RESULTS: The oxygen transfer condition was manifested indirectly by manipulating the impeller speed and aeration rate in accordance with a Central Composite Rotatory Design (CCRD). The dissolved oxygen concentration and the volumetric oxygen transfer coefficient (kLa) were determined at corresponding combinations of impeller speed and aeration rate. The maximal specific extracellular glucose oxidase production (3.17 U mg-1 dry cell mass) was achieved when the initial dissolved oxygen concentration was 6.83 mg l-1 at the impeller speed of 420 rev min-1 and at the rate of aeration of 0.25 vvm. It was found out that while impeller speed had a direct effect on the production of enzyme, a correlation between kLa and specific GOD production could not be established. CONCLUSION: At the agitation speed of 420 rev min-1 and at 0.25 vvm aeration rate, the degree of turbulence and the dissolved oxygen concentration were thought to be optimal both for cellular growth and production of enzyme. SIGNIFICANCE AND IMPACT OF THE STUDY: The combined effect of agitation and aeration on recombinant glucose oxidase production in batch cultivation has not yet been reported in the literature. Therefore, this study gives an insight into the effect of these two important physical parameters on recombinant protein production. It also suggests that since there is no correlation between kLa and specific production of GOD, kLa should not be used as one of the scale-up parameters.