A heterotrimeric PCNA in the hyperthermophilic archaeon Sulfolobus solfataricus

The sliding clamp, PCNA, of the archaeon Sulfolobus solfataricus P2 is a heterotrimer of three distinct subunits (PCNA1, 2, and 3) that assembles in a defined manner. The PCNA heterotrimer, but not individual subunits, stimulates the activities of the DNA polymerase, DNA ligase I, and the flap endonuclease (FEN1) of S. solfataricus. Distinct PCNA subunits contact DNA polymerase, DNA ligase, or FEN1, imposing a defined architecture at the lagging strand fork and suggesting the existence of a preformed scanning complex at the fork. This provides a mechanism to tightly couple DNA synthesis and Okazaki fragment maturation. Additionally, unique subunit-specific interactions between components of the clamp loader, RFC, suggest a model for clamp loading of PCNA.     

Replication factor C is a more effective proliferating cell nuclear antigen (PCNA) opener than the checkpoint clamp loader, Rad24-RFC

Clamp loaders from all domains of life load clamps onto DNA. The clamp tethers DNA polymerases to DNA to increase the processivity of synthesis as well as the efficiency of replication. Here, we investigated proliferating cell nuclear antigen (PCNA) binding and opening by the Saccharomyces cerevisiae clamp loader, replication factor C (RFC), and the DNA damage checkpoint clamp loader, Rad24-RFC, using two separate fluorescence intensity-based assays. Analysis of PCNA opening by RFC revealed a two-step reaction in which RFC binds PCNA before opening PCNA rather than capturing clamps that have transiently and spontaneously opened in solution. The affinity of RFC for PCNA is about an order of magnitude lower in the absence of ATP than in its presence. The affinity of Rad24-RFC for PCNA in the presence of ATP is about an order magnitude weaker than that of RFC for PCNA, similar to the RFC-PCNA interaction in the absence of ATP. Importantly, fewer open clamp loader-clamp complexes are formed when PCNA is bound by Rad24-RFC than when bound by RFC.     

The clamp-loading complex for processive DNA replication

DNA polymerase requires two processing factors, sliding clamps and clamp loaders, to direct rapid and accurate duplication of genomic DNA. In eukaryotes, proliferating cell nuclear antigen (PCNA), the ring-shaped sliding clamp, encircles double-stranded DNA within its central hole and tethers the DNA polymerases onto DNA. Replication factor C (RFC) acts as the clamp loader, which correctly installs the sliding clamp onto DNA strands in an ATP-dependent manner. Here we report the three-dimensional structure of an archaeal clamp-loading complex (RFC-PCNA-DNA) determined by single-particle EM. The three-dimensional structure of the complex, reconstituted in vitro using a nonhydrolyzable ATP analog, reveals two components, a closed ring and a horseshoe-shaped element, which correspond to PCNA and RFC, respectively. The atomic structure of PCNA fits well into the closed ring, suggesting that this ternary complex represents a state just after the PCNA ring has closed to encircle the DNA duplex.     

A central swivel point in the RFC clamp loader controls PCNA opening and loading on DNA

Replication factor C (RFC) is a five-subunit complex that loads proliferating cell nuclear antigen (PCNA) clamps onto primer-template DNA (ptDNA) during replication. RFC subunits belong to the AAA(+) superfamily, and their ATPase activity drives interactions between the clamp loader, the clamp, and the ptDNA, leading to topologically linked PCNA·ptDNA. We report the kinetics of transient events in Saccharomyces cerevisiae RFC-catalyzed PCNA loading, including ATP-induced RFC activation, PCNA opening, ptDNA binding, ATP hydrolysis, PCNA closing, and PCNA·ptDNA release. This detailed perspective enables assessment of individual RFC-A, RFC-B, RFC-C, RFC-D, and RFC-E subunit functions in the reaction mechanism. Functions have been ascribed to RFC subunits previously based on a steady-state analysis of 'arginine-finger' ATPase mutants; however, pre-steady-state analysis provides a different view. The central subunit RFC-C serves as a critical swivel point in the clamp loader. ATP binding to this subunit initiates RFC activation, and the clamp loader adopts a spiral conformation that stabilizes PCNA in a corresponding open spiral. The importance of RFC subunit response to ATP binding decreases as RFC-C>RFC-D>RFC-B, with RFC-A being unnecessary. RFC-C-dependent activation of RFC also enables ptDNA binding, leading to the formation of the RFC·ATP·PCNA(open)·ptDNA complex. Subsequent ATP hydrolysis leads to complex dissociation, with RFC-D activity contributing the most to rapid ptDNA release. The pivotal role of the RFC-B/C/D subunit ATPase core in clamp loading is consistent with the similar central location of all three ATPase active subunits of the Escherichia coli clamp loader.     

Analysis of the role of PCNA-DNA contacts during clamp loading

Background  

Sliding clamps, such as Proliferating Cell Nuclear Antigen (PCNA) in eukaryotes, are ring-shaped protein complexes that encircle DNA and enable highly processive DNA replication by serving as docking sites for DNA polymerases. In an ATP-dependent reaction, clamp loader complexes, such as the Replication Factor-C (RFC) complex in eukaryotes, open the clamp and load it around primer-template DNA.     

ATP binding and hydrolysis-driven rate-determining events in the RFC-catalyzed PCNA clamp loading reaction

The multi-subunit replication factor C (RFC) complex loads circular proliferating cell nuclear antigen (PCNA) clamps onto DNA where they serve as mobile tethers for polymerases and coordinate the functions of many other DNA metabolic proteins. The clamp loading reaction is complex, involving multiple components (RFC, PCNA, DNA, and ATP) and events (minimally: PCNA opening/closing, DNA binding/release, and ATP binding/hydrolysis) that yield a topologically linked clamp·DNA product in less than a second. Here, we report pre-steady-state measurements of several steps in the reaction catalyzed by Saccharomyces cerevisiae RFC and present a comprehensive kinetic model based on global analysis of the data. Highlights of the reaction mechanism are that ATP binding to RFC initiates slow activation of the clamp loader, enabling it to open PCNA (at ~2 s(-1)) and bind primer-template DNA (ptDNA). Rapid binding of ptDNA leads to formation of the RFC·ATP·PCNA(open)·ptDNA complex, which catalyzes a burst of ATP hydrolysis. Another slow step in the reaction follows ATP hydrolysis and is associated with PCNA closure around ptDNA (8 s(-1)). Dissociation of PCNA·ptDNA from RFC leads to catalytic turnover. We propose that these early and late rate-determining events are intramolecular conformational changes in RFC and PCNA that control clamp opening and closure, and that ATP binding and hydrolysis switch RFC between conformations with high and low affinities, respectively, for open PCNA and ptDNA, and thus bookend the clamp loading reaction.     

Reverse-chaperoning activity of an AAA+ protein

Speed and processivity of replicative DNA polymerases can be enhanced via coupling to a sliding clamp. Due to the closed ring shape of the clamp, a clamp loader protein, belonging to the AAA+ class of ATPases, needs to open the ring-shaped clamp before loading it to DNA. Here, we developed real-time fluorescence assays to study the clamp (PCNA) and the clamp loader (RFC) from the mesophilic archaeon Methanosarcina acetivorans. Unexpectedly, we discovered that RFC can assemble a PCNA ring from monomers in solution. A motion-based DNA polymerization assay showed that the PCNA assembled by RFC is functional. This PCNA assembly activity required the ATP-bound conformation of RFC. Our work demonstrates a reverse-chaperoning activity for an AAA+ protein that can act as a template for the assembly of another protein complex.     

Mechanism of proliferating cell nuclear antigen clamp opening by replication factor C

The eukaryotic replication factor C (RFC) clamp loader is an AAA+ spiral-shaped heteropentamer that opens and closes the circular proliferating cell nuclear antigen (PCNA) clamp processivity factor on DNA. In this study, we examined the roles of individual RFC subunits in opening the PCNA clamp. Interestingly, Rfc1, which occupies the position analogous to the delta clamp-opening subunit in the Escherichia coli clamp loader, is not required to open PCNA. The Rfc5 subunit is required to open PCNA. Consistent with this result, Rfc2.3.4.5 and Rfc2.5 subassemblies are capable of opening and unloading PCNA from circular DNA. Rfc5 is positioned opposite the PCNA interface from Rfc1, and therefore, its action with Rfc2 in opening PCNA indicates that PCNA is opened from the opposite side of the interface that the E. coli delta wrench acts upon. This marks a significant departure in the mechanism of eukaryotic and prokaryotic clamp loaders. Interestingly, the Rad.RFC DNA damage checkpoint clamp loader unloads PCNA clamps from DNA. We propose that Rad.RFC may clear PCNA from DNA to facilitate shutdown of replication in the face of DNA damage.     

The Mechanical Properties of PCNA: Implications for the Loading and Function of a DNA Sliding Clamp

Sliding clamps are toroidal proteins that encircle DNA and act as mobile platforms for DNA replication and repair machinery. To be loaded onto DNA, the eukaryotic sliding clamp Proliferating Cell Nuclear Antigen (PCNA) must be splayed open at one of the subunit-subunit interfaces by the ATP-dependent clamp loader, Replication Factor C, whose clamp-interacting sites form a right-handed spiral. Earlier molecular dynamics (MD) studies suggested that when PCNA opens, it preferentially adopts a right-handed spiral to match the spiral of the clamp loader. Here, analysis of considerably longer MD simulations shows that although the opened form of PCNA can achieve conformations matching the helical pitch of Replication Factor C, it is not biased toward a right-handed spiral structure. A coarse-grained elastic model was also built; its strong correspondence to the all-atom MD simulations of PCNA suggests that the behavior of the open clamp is primarily due to elastic deformation governed by the topology of the clamp domains. The elastic model was further used to construct the energy landscape of the opened PCNA clamp, including conformations that would allow binding to the clamp loader and loading onto double-stranded DNA. A picture of PCNA emerges of a rather flexible protein that, once opened, is mechanically compliant in the clamp opening process.     

The Caenorhabditis elegans Rad17 homolog HPR-17 is required for telomere replication

Subunits of the Rad9/Rad1/Hus1 (9-1-1) proliferating cell nuclear antigen (PNCA)-like sliding clamp are required for DNA damage responses and telomerase-mediated telomere replication in the nematode Caenorhabditis elegans. PCNA sliding clamps are loaded onto DNA by a replication factor C (RFC) clamp loader. The C. elegans Rad17 RFC clamp loader homolog, hpr-17, functions in the same pathway as the 9-1-1 complex with regard to both the DNA damage response and telomerase-mediated telomere elongation. Thus, hpr-17 defines an RFC-like complex that facilitates telomerase activity in vivo in C. elegans.     

Molecular modeling-based analysis of interactions in the RFC-dependent clamp-loading process

Replication and related processes in eukaryotic cells require replication factor C (RFC) to load a molecular clamp for DNA polymerase in an ATP-driven process, involving multiple molecular interactions. The detailed understanding of this mechanism is hindered by the lack of data regarding structure, mutual arrangement, and dynamics of the players involved. In this study, we analyzed interactions that take place during loading onto DNA of either the PCNA clamp or the Rad9-Rad1-Hus1 checkpoint complex, using computationally derived molecular models. Combining the modeled structures for each RFC subunit with known structural, biochemical, and genetic data, we propose detailed models of how two of the RFC subunits, RFC1 and RFC3, interact with the C-terminal regions of PCNA. RFC1 is predicted to bind PCNA similarly to the p21-PCNA interaction, while the RFC3-PCNA binding is proposed to be similar to the E. coli delta-beta interaction. Additional sequence and structure analysis, supported by experimental data, suggests that RFC5 might be the third clamp loader subunit to bind the equivalent PCNA region. We discuss functional implications stemming from the proposed model of the RFC1-PCNA interaction and compare putative clamp-interacting regions in RFC1 and its paralogs, Rad17 and Ctf18. Based on the individual intermolecular interactions, we propose RFC and PCNA arrangement that places three RFC subunits in association with each of the three C-terminal regions in PCNA. The two other RFC subunits are positioned at the two PCNA interfaces, with the third PCNA interface left unobstructed. In addition, we map interactions at the level of individual subunits between the alternative clamp loader/clamp system, Rad17-RFC(2-5)/Rad9-Rad1-Hus1. The proposed models of interaction between two clamp/clamp loader pairs provide both structural framework for interpretation of existing experimental data and a number of specific findings that can be subjected to direct experimental testing.     

Requirement for ATP by the DNA damage checkpoint clamp loader

The DNA damage clamp loader replication factor C (RFC-Rad24) consists of the Rad24 protein and the four small Rfc2-5 subunits of RFC. This complex loads the heterotrimeric DNA damage clamp consisting of Rad17, Mec3, and Ddc1 (Rad17/3/1) onto partial duplex DNA in an ATP-dependent manner. Interactions between the clamp loader and the clamp have been proposed to mirror those of the replication clamp loader RFC and the sliding clamp proliferating cell nuclear antigen (PCNA). In that system, three ATP molecules bound to the Rfc2, Rfc3, and Rfc4 subunits are necessary and sufficient for efficient loading of PCNA, whereas ATP binding to Rfc1 is not required. In contrast, in this study, we show that mutant RFC-Rad24 with a rad24-K115E mutation in the ATP-binding domain of Rad24 shows defects in the ATPase of the complex and is defective for interaction with Rad17/3/1 and for loading of the checkpoint clamp. A similar defect was measured with a mutant RFC-Rad24 clamp loader carrying a rfc4K55R ATP-binding mutation, whereas the rfc4K55E clamp loader showed partial loading activity, in agreement with genetic studies of these mutants. These studies show that ATP utilization by the checkpoint clamp/clamp loader system is effectively different from that by the structurally analogous replication system.     

Replication protein A-directed unloading of PCNA by the Ctf18 cohesion establishment complex

The replication clamp PCNA is loaded around DNA by replication factor C (RFC) and functions in DNA replication and repair. Regulated unloading of PCNA during the progression and termination of DNA replication may require additional factors. Here we show that a Saccharomyces cerevisiae complex required for the establishment of sister chromatid cohesion functions as an efficient unloader of PCNA. Unloading requires ATP hydrolysis. This seven-subunit Ctf18-RFC complex consists of the four small subunits of RFC, together with Ctf18, Dcc1, and Ctf8. Ctf18-RFC was also a weak loader of PCNA onto naked template-primer DNA. However, when the single-stranded DNA template was coated by the yeast single-stranded DNA binding protein replication protein A (RPA) but not by a mutant form of RPA or a heterologous single-stranded DNA binding protein, both binding of Ctf18-RFC to substrate DNA and loading of PCNA were strongly inhibited, and unloading predominated. Neither yeast RFC itself nor two other related clamp loaders, containing either Rad24 or Elg1, catalyzed significant unloading of PCNA. The Dcc1 and Ctf8 subunits of Ctf18-RFC, while required for establishing sister chromatid cohesion in vivo, did not function specifically in PCNA unloading in vitro, thereby separating the functionality of the Ctf18-RFC complex into two distinct paths.     

Distinct roles for ATP binding and hydrolysis at individual subunits of an archaeal clamp loader

Circular clamps are utilised by replicative polymerases to enhance processivity. The topological problem of loading a toroidal clamp onto DNA is overcome by ATP-dependent clamp loader complexes. Different organisms use related protein machines to load clamps, but the mechanisms by which they utilise ATP are surprisingly different. Using mutant clamp loaders that are deficient in either ATP binding or hydrolysis in different subunits, we show how the different subunits of an archaeal clamp loader use ATP binding and hydrolysis in distinct ways at different steps in the loading process. Binding of nucleotide by the large subunit and three of the four small subunits is sufficient for clamp loading. However, ATP hydrolysis by the small subunits is required for release of PCNA to allow formation of the complex between PCNA and the polymerase, while hydrolysis by the large subunit is required for catalytic clamp loading.     

A novel heterotetrameric structure of the crenarchaeal PCNA2-PCNA3 complex

Proliferating cell nuclear antigen (PCNA) is a key protein that orchestrates the arrangement of DNA-processing proteins on DNA during DNA metabolism. In crenarchaea, PCNA forms a heterotrimer (PCNA123) consisting of PCNA1, PCNA2, and PCNA3, while in most eukaryotes and many archaea PCNAs form a homotrimer. Interestingly, unique oligomeric PCNAs from Sulfolobus tokodaii were reported in which PCNA2 and PCNA3 form a heterotrimer without PCNA1. In this paper, we describe the crystal structure of the stoPCNA2-stoPCNA3 complex. While most DNA sliding clamps form ring-shaped structures, our crystal structure showed an elliptic ring-like heterotetrameric complex, differing from a previous reports. Furthermore, we investigated the composition and the dimension of the stoPCNA2-stoPCNA3 complex in the solution using gel-filtration column chromatography and small-angle X-ray scattering analyses, respectively. These results indicate that stoPCNA2 and stoPCNA3 form the heterotetramer in solution. Based on our heterotetrameric structure, we propose a possible biological role for the heterotetrameric complex as a Holliday junction clamp.     

Interplay of clamp loader subunits in opening the beta sliding clamp of Escherichia coli DNA polymerase III holoenzyme

The Escherichia coli beta dimer is a ring-shaped protein that encircles DNA and acts as a sliding clamp to tether the replicase, DNA polymerase III holoenzyme, to DNA. The gamma complex (gammadeltadelta'chipsi) clamp loader couples ATP to the opening and closing of beta in assembly of the ring onto DNA. These proteins are functionally and structurally conserved in all cells. The eukaryotic equivalents are the replication factor C (RFC) clamp loader and the proliferating cell nuclear antigen (PCNA) clamp. The delta subunit of the E. coli gamma complex clamp loader is known to bind beta and open it by parting one of the dimer interfaces. This study demonstrates that other subunits of gamma complex also bind beta, although weaker than delta. The gamma subunit like delta, affects the opening of beta, but with a lower efficiency than delta. The delta' subunit regulates both gamma and delta ring opening activities in a fashion that is modulated by ATP interaction with gamma. The implications of these actions for the workings of the E. coli clamp loading machinery and for eukaryotic RFC and PCNA are discussed.     

Biochemical characterization of DNA damage checkpoint complexes: clamp loader and clamp complexes with specificity for 5' recessed DNA

The cellular pathways involved in maintaining genome stability halt cell cycle progression in the presence of DNA damage or incomplete replication. Proteins required for this pathway include Rad17, Rad9, Hus1, Rad1, and Rfc-2, Rfc-3, Rfc-4, and Rfc-5. The heteropentamer replication factor C (RFC) loads during DNA replication the homotrimer proliferating cell nuclear antigen (PCNA) polymerase clamp onto DNA. Sequence similarities suggest the biochemical functions of an RSR (Rad17–Rfc2–Rfc3–Rfc4–Rfc5) complex and an RHR heterotrimer (Rad1–Hus1–Rad9) may be similar to that of RFC and PCNA, respectively. RSR purified from human cells loads RHR onto DNA in an ATP-, replication protein A-, and DNA structure-dependent manner. Interestingly, RSR and RFC differed in their ATPase activities and displayed distinct DNA substrate specificities. RSR preferred DNA substrates possessing 5′ recessed ends whereas RFC preferred 3′ recessed end DNA substrates. Characterization of the biochemical loading reaction executed by the checkpoint clamp loader RSR suggests new insights into the mechanisms underlying recognition of damage-induced DNA structures and signaling to cell cycle controls. The observation that RSR loads its clamp onto a 5′ recessed end supports a potential role for RHR and RSR in diverse DNA metabolism, such as stalled DNA replication forks, recombination-linked DNA repair, and telomere maintenance, among other processes.     

Biochemical Characterization of DNA Damage Checkpoint Complexes: Clamp Loader and Clamp Complexes with Specificity for 5′ Recessed DNA

The cellular pathways involved in maintaining genome stability halt cell cycle progression in the presence of DNA damage or incomplete replication. Proteins required for this pathway include Rad17, Rad9, Hus1, Rad1, and Rfc-2, Rfc-3, Rfc-4, and Rfc-5. The heteropentamer replication factor C (RFC) loads during DNA replication the homotrimer proliferating cell nuclear antigen (PCNA) polymerase clamp onto DNA. Sequence similarities suggest the biochemical functions of an RSR (Rad17–Rfc2–Rfc3–Rfc4–Rfc5) complex and an RHR heterotrimer (Rad1–Hus1–Rad9) may be similar to that of RFC and PCNA, respectively. RSR purified from human cells loads RHR onto DNA in an ATP-, replication protein A-, and DNA structure-dependent manner. Interestingly, RSR and RFC differed in their ATPase activities and displayed distinct DNA substrate specificities. RSR preferred DNA substrates possessing 5′ recessed ends whereas RFC preferred 3′ recessed end DNA substrates. Characterization of the biochemical loading reaction executed by the checkpoint clamp loader RSR suggests new insights into the mechanisms underlying recognition of damage-induced DNA structures and signaling to cell cycle controls. The observation that RSR loads its clamp onto a 5′ recessed end supports a potential role for RHR and RSR in diverse DNA metabolism, such as stalled DNA replication forks, recombination-linked DNA repair, and telomere maintenance, among other processes.     

Replication factor C clamp loader subunit arrangement within the circular pentamer and its attachment points to proliferating cell nuclear antigen

Replication factor C (RFC) is a heteropentameric AAA+ protein clamp loader of the proliferating cell nuclear antigen (PCNA) processivity factor. The prokaryotic homologue, gamma complex, is also a heteropentamer, and structural studies show the subunits are arranged in a circle. In this report, Saccharomyces cerevisiae RFC protomers are examined for their interaction with each other and PCNA. The data lead to a model of subunit order around the circle. A characteristic of AAA+ oligomers is the use of bipartite ATP sites in which one subunit supplies a catalytic arginine residue for hydrolysis of ATP bound to the neighboring subunit. We find that the RFC(3/4) complex is a DNA-dependent ATPase, and we use this activity to determine that RFC3 supplies a catalytic arginine to the ATP site of RFC4. This information, combined with the subunit arrangement, defines the composition of the remaining ATP sites. Furthermore, the RFC(2/3) and RFC(3/4) subassemblies bind stably to PCNA, yet neither RFC2 nor RFC4 bind tightly to PCNA, indicating that RFC3 forms a strong contact point to PCNA. The RFC1 subunit also binds PCNA tightly, and we identify two hydrophobic residues in RFC1 that are important for this interaction. Therefore, at least two subunits in RFC make strong contacts with PCNA, unlike the Escherichia coli gamma complex in which only one subunit makes strong contact with the beta clamp. Multiple strong contact points to PCNA may reflect the extra demands of loading the PCNA trimeric ring onto DNA compared with the dimeric beta ring.     

Evolutionary clues to eukaryotic DNA clamp-loading mechanisms: analysis of the functional constraints imposed on replication factor C AAA+ ATPases

Ring-shaped sliding clamps encircle DNA and bind to DNA polymerase, thereby preventing it from falling off during DNA replication. In eukaryotes, sliding clamps are loaded onto DNA by the replication factor C (RFC) complex, which consists of five distinct subunits (A–E), each of which contains an AAA+ module composed of a RecA-like α/β ATPase domain followed by a helical domain. AAA+ ATPases mediate chaperone-like protein remodeling. Despite remarkable progress in our understanding of clamp loaders, it is still unclear how recognition of primed DNA by RFC triggers ATP hydrolysis and how hydrolysis leads to conformational changes that can load the clamp onto DNA. While these questions can, of course, only be resolved experimentally, the design of such experiments is itself non-trivial and requires that one first formulate the right hypotheses based on preliminary observations. The functional constraints imposed on protein sequences during evolution are potential sources of information in this regard, inasmuch as these presumably are due to and thus reflect underlying mechanisms. Here, rigorous statistical procedures are used to measure and compare the constraints imposed on various RFC clamp-loader subunits, each of which performs a related but somewhat different, specialized function. Visualization of these constraints, within the context of the RFC structure, provides clues regarding clamp-loader mechanisms—suggesting, for example, that RFC-A possesses a triggering component for DNA-dependent ATP hydrolysis. It also suggests that, starting with RFC-A, four RFC subunits (A–D) are sequentially activated through a propagated switching mechanism in which a conserved arginine swings away from a position that disrupts the catalytic Walker B region and into contact with DNA thread through the center of the RFC/clamp complex. Strong constraints near regions of interaction between subunits and with the clamp likewise provide clues regarding possible coupling of hydrolysis-driven conformational changes to the clamp's release and loading onto DNA.