Nucleotide sequence and deletion analysis of the cellulase-encoding gene celH of Clostridium thermocellum

The complete nucleotide sequence of the celH gene of Clostridium thermocellum was determined. The open reading frame extended over 2.7-kb DNA fragment and encoded a 900-amino acid (aa) protein (Mr 102,301) which hydrolyzes carboxymethylcellulose, p-nitrophenyl-beta-D-cellobioside, methylumbelliferyl- beta-D-cellobioside, barley beta-glucan, and larchwood xylan. The N terminus showed a typical signal peptide, and a cleavage site after Ser44 was predicted. Two Pro-Thr-Ser-rich regions divided the protein into three approximately equal domains. The central 328-aa region was similar to the N-terminal part, carrying the active site, of C. thermocellum endoglucanase E (EGE; 30.2%). The C-terminal region ended with two conserved 24-aa stretches showing close similarity with those previously described in EGA, EGB, EGD, EGE, EGX, and xylanase from C. thermocellum. Deletions of celH removing up to 327 codons from the 5' end and up to 245 codons from the 3' end of the coding sequence did not affect enzyme activity, confirming that the central domain was indeed responsible for catalytic activity. Production of truncated EGH in Escherichia coli was increased up to 120-fold by fusing fragments containing the 3' portion of the gene with the start of lacZ' present in pTZ19R.     

Purification of Clostridium thermocellum xylanase Z expressed in Escherichia coli and identification of the corresponding product in the culture medium of C. thermocellum.

An endoxylanase encoded by the xynZ gene of Clostridium thermocellum was purified from Escherichia coli harbouring a fragment of the gene cloned in pUC8. The purified enzyme showed two active bands of Mr 41,000 and 39,000, the latter one presumably derived from the former through proteolysis. The enzyme was highly active on xylan and para-nitrophenyl-beta-D-xylobioside. The major end product of xylan hydrolysis was xylobiose. With an antiserum raised against the enzyme purified from E. coli, an immunoreactive polypeptide of Mr 90,000, corresponding to the entire xynZ gene product, was detected in a culture supernatant from C. thermocellum grown on cellulose. By immunological detection, xylanase Z was shown to be associated with a cellulose-binding, high-molecular-weight fraction whose properties coincided with those described previously for the cellulose-degrading complex of C. thermocellum known as the cellulosome.     

Conserved reiterated domains in Clostridium thermocellum endoglucanases are not essential for catalytic activity

The complete nucleotide sequence of the Clostridium thermocellum celE gene, coding for an endo-beta-1,4-glucanase (endoglucanase E; EGE) with xylan-hydrolysing activity has been determined. The structural gene consists of an open reading frame (ORF) of 2442 bp commencing with a GTG start codon and followed by a TAA stop codon. The nucleotide sequence obtained has been confirmed by comparing the predicted amino acid sequence with that derived by N-terminal amino acid sequencing of the purified protein. The EGE sequence contains a region homologous to the reiterated domain found at the C terminus of other endoglucanases from the same organism. BAL 31 deletions of the structural gene have revealed the extent to which this conserved sequence is necessary for endoglucanase and xylanase activity. A region of DNA, upstream from the structural gene has also been sequenced and a ribosome-binding site and putative promoter sequences have been identified. A second ORF which ends 349 bp 5' to the GTG start codon of the celE gene has also been identified. The encoded product contains a C terminus homologous to other C. thermocellum endoglucanases.     

Cloning and sequencing of the gene encoding Vibrio cholerae O1 fimbrial subunit (fimbrillin)

Abstract The gene encoding an 18 kDa fimbrial subunit of Vibrio cholerae O1 was identified in a fimbriate strain Bgd17. Mixed oligoprimers were prepared based on the amino acid sequence of the N-terminus and that from a cyanogen bromide-cleaved fragment of the fimbrillin. A PCR-amplified 185 bp DNA fragment was sequenced. This 185 bp fragment was further extended to 540 bp to 3' and 5' termini by RNA-PCR using a primer containing a random hexamer at its 3' end. This fragment did not contain the stop codons. It was further extended by a gene walking method using Eco RI cassette and its primers. Finally a 660 bp fragment was obtained and sequenced. This fragment contained the complete open reading frame of the structural subunit of the fimbriae, composed of 169 amino acids with a molecular mass of 17435.65 and a leader sequence of 6 or 9 amino acids. The deduced amino acid sequence of the polypeptide encoded by the gene, designated fim A, displayed a highly conserved sequence of MKXXXGFTLI EL of type 4 fimbriae.     

Sequence analysis of the Clostridium cellulolyticum endoglucanase-A-encoding gene, celCCA

The nucleotide sequence of a Clostridium cellulolyticum endo-beta-1,4- glucanase (EGCCA)-encoding gene (celCCA) and its flanking regions, was determined. An open reading frame (ORF) of 1425 bp was found, encoding a protein of 475 amino acids (aa). This ORF began with an ATG start codon and ended with a TAA ochre stop codon. The N-terminal region of the EGCCA protein resembled a typical signal sequence of a Gram-positive bacterial extracellular protein. A putative signal peptidase cleavage site was determined. EGCCA, without a signal peptide, was found to be composed of more than 35% hydrophobic aa and to have an Mr of 50715. Comparison of the encoded sequence with other known cellulase sequences showed the existence of various kinds of aa sequence homologies. First, a strong homology was found between the C-terminal region of EGCCA, containing a reiterated stretch of 24 aa, and the conserved reiterated region previously found to exist in four Clostridium thermocellum endoglucanases and one xylanase from the same organism. This region was suspected of playing a role in organizing the cellulosome complex. Second, an extensive homology was found between EGCCA and the N-terminal region of the large endoglucanase, EGE, from C. thermocellum, which suggests that they may have a common ancestral gene. Third, a region, which extended for 21 aa residues beginning at aa + 127, was found to be homologous with regions of cellulases belonging to Bacilli, Clostridia and Erwinia chrysanthemi.     

Nucleotide sequence of the celG gene of Clostridium thermocellum and characterization of its product, endoglucanase CelG.

The nucleotide sequence of the celG gene of Clostridium thermocellum, encoding endoglucanase CelG, was determined. The open reading frame extended over 1,698 bp and encoded a 566-amino-acid polypeptide (molecular weight of 63,128) similar to the C. thermocellum endoglucanase CelB (51.5% identical residues). The N terminus displayed a typical signal peptide, followed by a catalytic domain. The C terminus, which was separated from the catalytic domain by a 25-amino-acid segment rich in Pro, Thr, and Ser, contained two conserved stretches of 22 amino acids closely similar to those previously described in other cellulases from the same organism. Expression of the gene in Escherichia coli was increased by fusing the fragment coding for the catalytic domain in frame with the start of the lacZ' gene present in the vector. A low- and a high-M(r) form of the protein were purified. The two forms displayed identical enzymatic properties. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that both forms consist of a major polypeptide of M(r) 50,000 and two minor polypeptides of M(r)s 49,000 and 48,000, resulting from heterogeneous proteolytic cleavage at the C terminus. An antiserum raised against the forms purified from E. coli reacted with an immunoreactive polypeptide of M(r) 66,000, which was associated with the extracellular cellulolytic complex of C. thermocellum known as the cellulosome.     

Nucleotide sequence of a novel kanamycin resistance gene, aphA-7, from Campylobacter jejuni and comparison to other kanamycin phosphotransferase genes

A novel kanamycin phosphotransferase gene, aphA-7, was cloned from a 14-kb plasmid obtained from a strain of Campylobacter jejuni and the nucleotide sequence of the gene was determined. The presumed open reading frame of the aphA-7 structural gene was 753 bp in length and encoded a protein of 251 amino acids with a calculated weight of 29,691 Da. A 29-kDa protein was demonstrated in Escherichia coli maxicells containing the cloned aphA-7 gene. A ribosomal binding site corresponding to 5 of 8 bases of the 3' end of the E. coli 16S rRNA was 8 bp upstream of the start codon. Sequences corresponding to the -35 and -10 regions of the consensus promoter sequences of E. coli were upstream of the presumed initiation codon of the gene. The DNA sequence was most closely related to the aphA-3 gene from Streptococcus faecalis, showing 55.4% sequence similarity. There was 45.6% identity at the amino acid level between the aphA-3 and the aphA-7 proteins. Of the three conserved regions noted previously in phosphotransferase genes, the aphA-7 amino acid sequence was identical to the six conserved amino acids in motif 3, but differed in one of the five conserved amino acids in motif 1 (if gaps are permitted) and 3 of the 10 conserved residues in motif 2. The 32.8% G + C ratio in the open reading frame of the aphA-7 kanamycin resistance gene, which is similar to that of the C. jejuni chromosome, suggests that the aphA-7 may be indigenous to Campylobacters.     

Analysis of the regulatory region of the protease III (ptr) gene of Escherichia coli K-12

The ptr gene of Escherichia coli encodes protease III (Mr 110,000) and a 50-kDa polypeptide, both of which are found in the periplasmic space. The gene is physically located between the recC and recB loci on the E. coli chromosome. The nucleotide sequence of a 1167-bp EcoRV-ClaI fragment of chromosomal DNA containing the promoter region and 885 bp of the ptr coding sequence has been determined. S1 nuclease mapping analysis showed that the major 5' end of the ptr mRNA was localized 127 bp upstream from the ATG start codon. The open reading frame (ORF), preceded by a Shine-Dalgarno sequence, extends to the end of the sequenced DNA. Downstream from the -35 and -10 regions is a sequence that strongly fits the consensus sequence of known nitrogen-regulated promoters. A signal peptide of 23 amino acids residues is present at the N terminus of the derived amino acid sequence. The cleavage site as well as the ORF were confirmed by sequencing the N terminus of mature protease III.     

Analyses of the gene and amino acid sequence of thePrevotella (bacteroides) ruminicola 23 xylanase reveals unexpected homology with endoglucanases from other genera of bacteria

The DNA sequence for the xylanase gene fromPrevotella (Bacteroides) ruminicola 23 was determined. The xylanase gene encoded for a protein with a molecular weight of 65,740. An apparent leader sequence of 22 amino acids was observed. The promoter region for expression of the xylanase gene inBacteroides species was identified with a promoterless chloramphenicol acetyltransferase gene. A region of high amino acid homology was found with the proposed catalytic domain of endoglucanases from several organisms, includingButyrivibrio fibrisolvens, Ruminococcus flavefaciens, andClostridium thermocellum. The cloned xylanase was found to exhibit endoglucanase activity against carboxymethyl cellulose. Analysis of the codon usage for the xylanase gene found a bias towards G and C in the third position in 16 of 18 amino acids with degenerate codons.     

Mutagenesis of the folC gene encoding folylpolyglutamate synthetase-dihydrofolate synthetase in Escherichia coli

The folC gene of Escherichia coli, cloned in a pUC19 vector, was mutagenized by progressive deletions from both the 5' and the 3' ends and by TAB linker insertion. A number of 5'-deleted genes, which had the initiator ATG codon removed, produced a truncated gene product, in reduced amounts, from a secondary initiation site. The most likely position of this site at a GTG codon located 35 codons downstream of the normal start site. This product could complement the folC mutation in E. coli strain SF4 as well as a strain deleted in the folC gene. The specific activity of extracts of the mutant enzyme are 4-16% that of the wild type enzyme for the folylpolyglutamate synthetase activity and 6-19% for the dihydrofolate synthetase activity. The relative amount of protein expressed by the mutant, compared to the wild type, in maxicells was comparable to the relative specific activity, suggesting that the kcat of the mutant enzyme is similar to that of the wild type. Mutants with up to 14 amino acids deleted from the carboxy terminal could still complement the folC deletion mutant. Seven out of ten linker insertions dispersed through the coding region of the gene showed complementation of the folC mutation in strain SF4 but none of these insertion mutants were able to complement the strain containing a deleted folC gene. None of the carboxy terminal or linker insertion mutants had a specific activity greater than 0.5% that of the wild type enzyme. The dihydrofolate synthetase and folylpolyglutamate synthetase activities behaved similarly in all mutants, both retaining a large fraction of the wild type activity in the amino terminal deletions and both being very low in the carboxy terminal deletions and linker insertion mutants. These studies are consistent with a single catalytic site for the two activities catalyzed by this enzyme.     

Conversion of xylan to ethanol by ethanologenic strains of Escherichia coli and Klebsiella oxytoca.

A two-stage process was evaluated for the fermentation of polymeric feedstocks to ethanol by a single, genetically engineered microorganism. The truncated xylanase gene (xynZ) from the thermophilic bacterium Clostridium thermocellum was fused with the N terminus of lacZ to eliminate secretory signals. This hybrid gene was expressed at high levels in ethanologenic strains of Escherichia coli KO11 and Klebsiella oxytoca M5A1(pLOI555). Large amounts of xylanase (25 to 93 mU/mg of cell protein) accumulated as intracellular products during ethanol production. Cells containing xylanase were harvested at the end of fermentation and added to a xylan solution at 60 degrees C, thereby releasing xylanase for saccharification. After cooling, the hydrolysate was fermented to ethanol with the same organism (30 degrees C), thereby replenishing the supply of xylanase for a subsequent saccharification. Recombinant E. coli metabolized only xylose, while recombinant K. oxytoca M5A1 metabolized xylose, xylobiose, and xylotriose but not xylotetrose. Derivatives of this latter organism produced large amounts of intracellular xylosidase, and the organism is presumed to transport both xylobiose and xylotriose for intracellular hydrolysis. By using recombinant M5A1, approximately 34% of the maximal theoretical yield of ethanol was obtained from xylan by this two-stage process. The yield appeared to be limited by the digestibility of commercial xylan rather than by a lack of sufficient xylanase or by ethanol toxicity. In general form, this two-stage process, which uses a single, genetically engineered microorganism, should be applicable for the production of useful chemicals from a wide range of biomass polymers.     

Conversion of xylan to ethanol by ethanologenic strains of Escherichia coli and Klebsiella oxytoca.

A two-stage process was evaluated for the fermentation of polymeric feedstocks to ethanol by a single, genetically engineered microorganism. The truncated xylanase gene (xynZ) from the thermophilic bacterium Clostridium thermocellum was fused with the N terminus of lacZ to eliminate secretory signals. This hybrid gene was expressed at high levels in ethanologenic strains of Escherichia coli KO11 and Klebsiella oxytoca M5A1(pLOI555). Large amounts of xylanase (25 to 93 mU/mg of cell protein) accumulated as intracellular products during ethanol production. Cells containing xylanase were harvested at the end of fermentation and added to a xylan solution at 60 degrees C, thereby releasing xylanase for saccharification. After cooling, the hydrolysate was fermented to ethanol with the same organism (30 degrees C), thereby replenishing the supply of xylanase for a subsequent saccharification. Recombinant E. coli metabolized only xylose, while recombinant K. oxytoca M5A1 metabolized xylose, xylobiose, and xylotriose but not xylotetrose. Derivatives of this latter organism produced large amounts of intracellular xylosidase, and the organism is presumed to transport both xylobiose and xylotriose for intracellular hydrolysis. By using recombinant M5A1, approximately 34% of the maximal theoretical yield of ethanol was obtained from xylan by this two-stage process. The yield appeared to be limited by the digestibility of commercial xylan rather than by a lack of sufficient xylanase or by ethanol toxicity. In general form, this two-stage process, which uses a single, genetically engineered microorganism, should be applicable for the production of useful chemicals from a wide range of biomass polymers.     

Nucleotide sequence of the glnA-glnL intercistronic region of Escherichia coli

The nucleotide (nt) sequence of a 682-bp fragment containing the 3' end of the glnA gene, the region between the glnA and glnL genes, and the 5' end of the glnL gene from Escherichia coli was determined. This segment contains the region coding for the last 107 amino acids (aa) of glutamine synthetase, including the adenylylation site of this enzyme. The analysis of this sequence revealed two REP sequences, a Rho-independent terminator, the putative glnL promoter and the possible binding site for the glnG product, NRI.     

Complete nucleotide sequence of the Escherichia coli recB gene.

The complete nucleotide sequence of the Escherichia coli recB gene which encodes a subunit of the ATP-dependent DNase, Exonuclease V, has been determined. The proposed coding region for the RecB protein is 3543 nucleotides long and would encode a polypeptide of 1180 amino acids with a calculated molecular weight of 133,973. The start of the recB coding sequence overlaps the 3' end of the upstream ptr gene, and the recB termination codon overlaps the initiation codon of the downstream recD gene, suggesting that these genes may form an operon. No sequences which reasonably fit the consensus for an E. coli promoter could be identified upstream of the proposed recB translational start. The predicted RecB amino acid sequence contains regions of homology with ATPases, DNA binding proteins and DNA repair enzymes.     

Sequence analysis of the inducible chloramphenicol resistance determinant in the Tn1696 integron suggests regulation by translational attenuation.

The sequence of the Tn1696 determinant for inducible nonenzymatic chloramphenicol resistance has been determined. The cml region, the fourth insert of the Tn1696 integron, is 1547 bases and includes a 59-base element at the 3' end, as is typical of integron inserts. One gene, designated cmlA and predicting a polypeptide of 44.2 kDa, is encoded in the insert. However, the cmlA region shows one feature not previously found in an integron insert. A promoter is located within the cmlA insert, and translational attenuation signals related to those of the inducible cat and ermC genes found in gram-positive organisms are also present. The regulatory region includes a leader peptide of nine amino acids, a ribosome stall sequence related to those preceding cat genes, and two alternative pairs of stem-loop structures which either sequester or disclose the ribosome binding site and start codon preceding the cmlA gene.