软骨细胞上清液诱导冻存复苏后人骨髓间充质干细胞的研究

目的:探讨人软骨细胞培养上清诱导冻存人骨髓充质干细胞向软骨细胞分化的可行性.方法:取进行全髋关节置换术老年患者的骨髓和软骨组织,利用密度梯度离心法、全骨髓培养法分别培养骨髓间充质干细胞,冻存备用.培养软骨细胞,观察细胞生长,收集软骨细胞培养上清.复苏冻存的人骨髓间充质干细胞,观察复苏后细胞生长状态.利用收集的软骨细胞培养上清对复苏间充质干细胞进行定向诱导,诱导培养2周,观察细胞外观表型变化,Ⅱ型胶原免疫组化检测诱导后人骨髓间充质干细胞Ⅱ型胶原的表达.结果:密度梯度离心法与全骨髓培养法均可分离获得人骨髓间充质干细胞,原代生长前者优于后者.复苏细胞仍进行可传代,与正常生长骨髓间充质细胞无明显差异,均可传至第8代.软骨细胞培养上清诱导2周后,细胞形状向圆形,多角形转变,冻存骨髓间充质干细胞Ⅱ型胶原免疫组化检测Ⅱ型胶原表达阳性.结论:老年人骨髓间充质干细胞仍具有向软骨细胞转化的能力,冻存不影响其转化能力.     

组织工程中应力对骨髓间充质干细胞分化为成骨细胞的影响

骨髓间充质干细胞具有自我复制、未分化的特点,并可在不同条件下分化为中胚层起源的多种细胞,是一种成体多能干细胞。就组织工程而言,良好的种子细胞是组织工程技术的关键,骨髓间充质干细胞的性质决定了其在骨组织工程领域中的重要地位。此外,骨骼系统属于机体的运动系统,承担体重是骨骼的重要功能之一;而且,人体内几乎所有的细胞都会受到力学因素的影响,故有必要研究力学因素对骨髓间充质干细胞诱导分化为成骨细胞的作用,为骨髓间充质干细胞的体外扩增、诱导分化及培养提供一种新途径。     

肌腱组织工程支架与种子细胞研究进展

目的:综述肌腱组织工程支架材料、细胞来源、制备技术及体外构建的研究进展.方法:查阅近期肌腱组织工程研究的相关文献,对组织工程肌腱支架的材料来源、制备技术,复合细胞种类,体外构建力学刺激等进行分析、归纳.结果:肌腱组织工程支架材料有天然材料、人工合成材料及复合材料等;制备技术包括静电纺丝和编织法等;其中支架材料的表面修饰是组织工程化肌腱构建的重要环节.与肌腱材料进行复合的种子细胞有肌腱细胞、骨髓间充质干细胞及成纤维细胞等.结论:复合材料是近年肌腱组织工程支架材料研究的重点,静电纺丝技术是一种具有潜力的支架制备技术,支架材料的表面修饰可促进细胞在支架上的黏附及肌腱的形成,种子细胞的研究仍是肌腱组织工程发展的瓶颈,周期性张力的存在为组织工程化肌腱的形成创造了条件.     

骨髓间充质干细胞捕获支架对犬冠状动脉再狭窄影响的研究

目的:观察骨髓间充质(MSCs)干细胞捕获支架能否预防和减少犬冠状动脉支架植入术后再狭窄.方法:①用乙基纤维素作为包被底物对支架进行包被,然后再包被骨髓间充质干细胞抗体.②以球囊损伤法建立犬冠状动脉狭窄模型,应用标准球囊导管技术,将包被有抗体的支架植入犬(n=20)冠状动脉前将支损伤段远端,再以相同方法在损伤段近端植入裸支架作为对照组(n=20).4w后处死动物,取出支架段血管行血管内超声(IVUS)及血管形态学检测分析血管管腔面积和内膜增生面积.结果:术后4周,骨髓间充质干细胞捕获支架组较裸支架组的最小管腔直径和新生内膜面积较明显减少(P<0.05),而最小管腔面积则明显增加(P<0.05).结论:骨髓间充质干细胞捕获支架能快速修复损伤的血管内膜,降低再狭窄的发生.     

影响骨髓间充质干细胞增殖的调节因素及其信号转导途径

骨髓间充质干细胞是一类骨髓来源的成体干细胞,其生长、增殖行为受到多种环境因素的影响.胞外基质、细胞因子、机械刺激等理化因素对骨髓间充质干细胞的生长和增殖起着重要的调节作用,这些调节因素通过不同的信号转导途径影响骨髓间充质干细胞增殖,但又常常出现交叉对话、相互影响.就胞外基质、细胞因子和机械刺激影响骨髓间充质干细胞的增殖及其相应信号转导途径的研究进展作一简要综述.     

胶原蛋白-壳聚糖支架的构建及其与骨髓基质干细胞复合的实验研究

目的:构建一种组织工程神经支架,并观察体外培养的骨髓基质干细胞在其内部的生长情况,为后续种子细胞的移植提供阶段性实验数据.方法:以Ⅰ型胶原蛋白和壳聚糖为原料通过冷冻干燥技术制备神经支架,扫描电镜观察其内部结构,测量其孔径大小、孔隙率等指标.将体外培养的骨髓基质干细胞与Ⅰ型胶原蛋白-壳聚糖神经支架复合,共培养2天;扫描电镜观察细胞在支架内部的生长情况.结果:构建的神经支架均为圆柱状,内部为纵向平行排列的孔径均匀的微管样结构,细胞紧密贴附在支架微孔内壁上,细胞生长状况良好.结论:Ⅰ型胶原蛋白-壳聚糖支架具有良好的内部三维结构和生物相容性,可与细胞复合后用于修复周围神经缺损.     

复合红景天苷支架材料对大鼠骨髓间充质干细胞的影响

探讨复合红景天苷微球的胶原蛋白材料支架对大鼠骨髓间充质干细胞的影响及作用。将红景天苷制作成微球复合到胶原蛋白中,扫描电镜观察材料支架的表征,接种大鼠骨髓间充质干细胞后扫描电镜观察细胞与材料的黏附性,CCK-8法测细胞在材料上的增殖情况,HE染色检测细胞在材料上的增殖及形态,S100免疫荧光化学法检测干细胞向神经细胞的分化情况。结果显示,细胞接种到材料上,在材料上黏附并生长。同种材料,随着时间的延长,材料上的细胞显著增殖(P0.05)。神经细胞标志性蛋白S100表达为阳性。复合红景天苷微球的胶原蛋白具有良好的生物相容性,红景天苷微球不影响细胞在材料上的增殖,且可有效诱导大鼠间充质干细胞向神经细胞分化。     

PLGA的不同组成对支架材料性能的影响研究

研究PLGA的不同组成对支架材料的力学性能、降解性能和生物学性能的影响。采用溶液浇注/颗粒沥取法制备出不同组成的PLGA多孔支架,对支架的力学性能和降解速率进行考察,同时将人真皮成纤维细胞接种于不同组成的PLGA支架材料上,培养不同时间后,检测细胞的粘附率和增殖率,以及细胞产生的总胶原含量,并通过扫描电镜观察支架上的细胞形态。结果显示,随PLA比例的增加,支架的力学强度增加,降解速率降低,但都不是线性变化。70:30比例的支架,拉伸强度最高,而70:30和80:20两种比例的支架,其降解速率没有显著性差异。PLGA不同组成的支架,均具有良好的细胞相容性,成纤维细胞粘附率和增殖率在三种比例的支架上没有显著性差异,细胞在支架表面生长良好,分泌大量的细胞外基质,细胞基本铺满整个支架。本文研究发现,PLGA的组成对支架力学性能、降解性能和生物学性能有细小但显著的影响,这将对组织构建选用PLGA支架材料提供有益的帮助。     

利用脱细胞血管基质体外构建小口径组织工程血管

目的探讨利用犬的间充质干细胞诱导分化种子细胞,以异种脱细胞血管基质为基础体外构建小口径血管移植物。方法采用密度梯度离心和贴壁培养的方法从犬骨髓中分离出间充质干细胞并体外培养,诱导分化成内皮样细胞和平滑肌样细胞;采用非离子型去垢剂和胰蛋白酶去除猪颈动脉血管壁结构细胞,对脱细胞基质进行组织学、力学检测及孔隙率评估。在生物反应器内采用旋转种植的方法将犬骨髓间充质干细胞诱导的内皮样细胞种植到脱细胞基质上,体外构建小口径组织工程血管。结果犬的骨髓间充质干细胞体外能够定向诱导分化为平滑肌样细胞和内皮样细胞,可以作为血管组织工程的种子细胞。经过脱细胞处理后,光镜和电镜观察证实血管壁的细胞成分完全去除。具有良好的孔径和孔隙率。支架在生物力学、孔隙率等方面符合构建组织工程血管支架的要求。在生物反应器内剪切力条件下可以初步构建出组织工程血管。结论小口径血管移植物可以将间充质干细胞诱导种子细胞,以异种脱细胞血管支架作为基质,在搏动性生物反应器内培养的方法进行构建。     

对比不同年龄段食蟹猴骨髓间充质干细胞的生物学特征

骨髓间充质干细胞因其广泛的临床应用前景而备受关注.非人灵长类动物在基因、生理和代谢等方面与人类相似,在制作疾病模型和疾病治疗研究等方面具有无可比拟的优势.因此,来源于非人灵长类的骨髓间充质干细胞是细胞移植和组织工程研究中的重要工具.本实验对比研究了不同年龄段食蟹猴骨髓间充质干细胞的生物学特征.结果发现,与中年食蟹猴骨髓间充质干细胞比较,青少年食蟹猴骨髓间充质干细胞具有明显高的增殖和分化潜能.长期体外培养的食蟹猴骨髓间充质干细胞能发生自发转变,转变后的细胞具有明显不同于骨髓间充质干细胞的形态特征.端粒酶活性检测显示,各年龄组不同代数的骨髓间充质干细胞端粒酶活性没有明显差别,但与骨髓间充质干细胞比较,转变后的细胞端粒酶活性显著增高.另一方面,随着体外培养时间延长,染色体不稳定性发生频率相应增加.这些结果提示在使用间充质干细胞进行实验或临床研究前,必须全面考虑各种因素,包括供体的年龄等,并且完善各种检测.     

静电纺丝的主要参数对PLGA纤维支架形貌和纤维直径的影响

EST(expressed sequence tags,EST)是一段长约150～500bp基因表达的外源序列片段,是由大规模随机挑取的cDNA克隆测序得到的组织或细胞基因组的表达序列标签。一个EST代表生物某一时期的某种组织或细胞的一个表达基因。主要综述了EST技术的原理方法,哺乳动物早期胚胎研究的理论基础以及EST技术在早期胚胎研究方面的应用,并讨论了利用EST进行研究分析的发展趋势。     

静电纺丝的主要参数对ＰＬＧＡ纤维支架形貌和纤维直径的影响

目的以聚乳酸-羟基乙酸共聚物(PLGA)为材料,采用静电纺丝方法制备纤维支架,考察制备参数对纤维支架结构及纤维直径的影响规律。方法以四氢呋喃(THF)和N,N-二甲基甲酰胺(DMF)的混合液为溶剂,调节PLGA溶液浓度、流量及电场强度分别制备了具有不同表面形貌的纤维支架。通过扫描电镜(SEM)观察了纺丝溶液的浓度、流量及电场强度对纤维形貌和直径的影响。同时在制备的PLGA纤维支架上接种了人的真皮成纤维细胞,并对细胞在PLGA支架上的黏附和增殖情况进行了研究,从而来评价支架材料的细胞相容性。结论结果表明,随着纺丝溶液浓度的增加,纤维直径逐渐增大,纤维直径的分布也随之增大。随着流量的增加,纤维直径略有增大。随着电场强度的增大,纤维直径没有明显的变化。但是电压和浓度的增大有助于减少珠丝的产生。体外细胞培养实验证明,制备的PLGA纤维支架能支持细胞正常的黏附和增殖活动。     

Fabrication of core-sheath structured fibers for model drug release and tissue engineering by emulsion electrospinning

A nanofibrous core-sheath structured scaffold incorporated with bioactive agents is supposed to promote cell migration, proliferation, and gene expressions through the controllable and sustainable release of bioactive agents from the fibers and the preservation of bioactivity. Here we present a novel and effective emulsion electrospinning method for obtaining fluorescein isothiocyanate-dextran (FITC-dextran)/poly(lactic-co-glycolic acid) (PLGA) and type I collagen/PLGA fibrous composite scaffolds. Core-sheath structured fibers with average diameters of 665 nm for FITC-dextran/PLGA and 567 nm for collagen/PLGA were successfully fabricated. In vitro-release profile shows sustained release of encapsulated FITC-dextran from FITC-dextran/PLGA fibers for as long as 7 weeks. The osteoblastic activity of the collagen/PLGA nanofibrous scaffold was investigated employing the osteoblastic-like MC3T3-E1 cell line. The results of the lactate dehydrogenase assay suggested excellent cytocompatibility. Cell proliferation and alkaline phosphatase activity were also ameliorated on this emulsion-electrospun collagen/PLGA fibrous scaffold. All the results indicated that this composite scaffold could support the early stages of osteoblast behavior as well as the immediate/late stages. The emulsion electrospinning process has potential for application in drug-release devices and as a 3-D scaffold in bone regeneration.     

PLGA/ECM神经支架性质的体外评价

以赖氨酸、神经生长因子(NGF)、聚乳酸聚羟基乙酸共聚物(PLGA)、猪皮来源的细胞外基质(ECM)为原料制备了一种复合材料;考察其内部三维结构,生物力学性质,降解特性,雪旺氏细胞黏附状况,以及其对NGF的可控释放作用;从而评价其作为促周围神经损伤修复支架的可行性。扫描电子显微镜(SEM)观察显示,PLGA渗透入去细胞猪皮内部固有的蜂窝状孔隙中,并覆盖在孔隙内表面;孔隙率为68.3%～81.2%,密度为0.62～0.68 g/cm3。复合材料的断裂强度为8.308 MPa,断裂伸长率为38.98%,弹性模量为97.27 MPa;在4周的体外降解测试中,其最大失重率为43.3%;赖氨酸在复合材料中的添加对降解液pH的相对稳定具有显著作用;在30 d中,复合材料对NGF的累积释放率为38%;通过雪旺氏细胞与复合材料的共培养,发现雪旺氏细胞能够在其表面及孔隙中黏附。因此表明本复合材料有望成为一种新型的促周围神经损伤修复支架。     

A cell leakproof PLGA‐collagen hybrid scaffold for cartilage tissue engineering

A cell leakproof porous poly(DL ‐lactic‐co‐glycolic acid) (PLGA)‐collagen hybrid scaffold was prepared by wrapping the surfaces of a collagen sponge except the top surface for cell seeding with a bi‐layered PLGA mesh. The PLGA‐collagen hybrid scaffold had a structure consisting of a central collagen sponge formed inside a bi‐layered PLGA mesh cup. The hybrid scaffold showed high mechanical strength. The cell seeding efficiency was 90.0% when human mesenchymal stem cells (MSCs) were seeded in the hybrid scaffold. The central collagen sponge provided enough space for cell loading and supported cell adhesion, while the bi‐layered PLGA mesh cup protected against cell leakage and provided high mechanical strength for the collagen sponge to maintain its shape during cell culture. The MSCs in the hybrid scaffolds showed round cell morphology after 4 weeks culture in chondrogenic induction medium. Immunostaining demonstrated that type II collagen and cartilaginous proteoglycan were detected in the extracellular matrices. Gene expression analyses by real‐time PCR showed that the genes encoding type II collagen, aggrecan, and SOX9 were upregulated. These results indicated that the MSCs differentiated and formed cartilage‐like tissue when being cultured in the cell leakproof PLGA‐collagen hybrid scaffold. The cell leakproof PLGA‐collagen hybrid scaffolds should be useful for applications in cartilage tissue engineering. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Effects of composition, solvent, and salt particles on the physicochemical properties of polyglycolide/poly(lactide-co-glycolide) scaffolds

Polyglycolide (PGA)/poly(lactide-co-glycolide) (PLGA) scaffolds were fabricated by a solvent casting/particulate leaching method using hexafluoroisopropanol (HFIP) or acetone for material dissolution and NaCl particles as porogen. The results revealed that the mechanical strength increased as the PGA percentage in a HFIP-processed scaffold increased. Chemical ingredients did not substantially affect the mechanical strength of acetone-processed scaffolds. Large NaCl particles led to weak mechanical strength, low porosity, and small specific surface area. For a fixed composition, PGA crystals in a HFIP-processed scaffold were smaller than those in an acetone-processed scaffold. High PGA fractions yielded partly fused PGA/PLGA scaffolds. A faster degradation rate of a scaffold could result from a higher PGA percentage, smaller NaCl particles, or the existence of chondrocytes. The combination of PGA and PLGA, which compensated each other for bioactivity, would be beneficial to cartilage regeneration.     

Investigation of particle-functionalized tissue engineering scaffolds using X-ray tomographic microscopy

A low-density, porous chitosan/poly-(dl-lactide-co-glycolide) (PLGA) microparticle composite scaffold was produced by thermally induced phase separation followed by lyophilization, to provide a bicontinuous microstructure potentially suitable for tissue engineering and locally controlled drug release. PLGA particles were mixed into the chitosan solution and subsequent phase separation during chitosan solidification forced PLGA particles into chitosan phase (Plateau borders). The distributions of volume, surface area, and elongation of 15,422 inclusions of agglomerated PLGA particles were calculated and approximated with log-normal distribution functions from nanotomography reconstructions. Cluster analysis revealed a homogenous inclusion distribution throughout the scaffold. The spatial location and orientation of individual inclusions within the Plateau borders of the scaffold were determined and from these the nearest-neighbor inter-inclusion distance distribution calculated, showing a mean of 2.5 microm. The depth of the inclusions in Plateau borders peaks at 700 or 125 nm, respectively, indicating a step-wise drug release from inclusions successively exposed during scaffold decomposition. Particle diameter ranged from 400 nm to 3 microm and inclusion Feret lengths ranged from 800 nm to 12 microm. These findings on composite morphology and distribution of inclusions are fundamental for predicting scaffold deterioration and particle-mediated drug release during ex vivo and in vivo cell cultivation.     

担载b-FGF的PLGA微球复合明胶支架的体外释放研究

目的:研究担载碱性成纤维细胞生长因子(b-FGF)微球复合明胶支架的外形特征、孔径、孔隙率及体外释放动力学,以期构建具有缓释功能、高孔隙率的担载细胞因子的新型复合明胶支架。方法:本文利用冷冻相分离法和S/O/W法先将b-FGF水溶液包裹于PLGA微球中,然后埋置于明胶溶液中制备为多孔复合明胶支架。分别对微球的形态和复合明胶支架的基本形态、孔径、孔隙率进行表征,通过Elisa法测定b-FGF在复合明胶支架中的体外释放行为。结果:制备成形态良好的三维复合明胶支架,其孔隙率为82.90%±1.45%,孔径范围为150~300μm,复合明胶支架中b-FGF在体外缓慢释放20余天。结论:担载蛋白微球复合明胶支架不仅满足组织工程支架的要求,还能有效缓释细胞因子,为细胞和组织生长提供良好的微环境,为进一步应用于组织工程领域提供了可能。     

Hydrophilic gelatin and hyaluronic acid-treated PLGA scaffolds for cartilage tissue engineering

Tissue engineering provides a new strategy for repairing damaged cartilage. Surface and mechanical properties of scaffolds play important roles in inducing cell growth.?Aim: The aim of this study was to fabricate and characterize PLGA and gelatin/hyaluronic acid-treated PLGA (PLGA-GH) sponge scaffolds for articular cartilage tissue engineering. Methods: The PLGA-GH scaffolds were cross-linked with gelatin and hyaluronic acid. Primary chondrocytes isolated from porcine articular cartilages were used to assess cell compatibility. The characteristic PLGA-GH scaffold was higher in water uptake ratio and degradation rate within 42 days than the PLGA scaffold. Results: The mean compressive moduli of PLGA and PLGA-GH scaffolds were 1.72±0.50 MPa and 1.86±0.90 MPa, respectively. The cell attachment ratio, proliferation, and extracellular matrix secretion on PLGA-GH scaffolds are superior to those of PLGA scaffolds. Conclusions: In our study, PLGA-GH scaffolds exhibited improvements in cell biocompatibility, cell proliferation, extracellular matrix synthesis, and appropriate mechanical and structural properties for potential engineering cartilage applications.     

Co-electrospun blends of PLGA, gelatin, and elastin as potential nonthrombogenic scaffolds for vascular tissue engineering

In search for novel biomimetic scaffolds for application in vascular tissue engineering, we evaluated a series of fibrous scaffolds prepared by coelectrospinning tertiary blends of poly(lactide-co-glycolide) (PLGA), gelatin, and elastin (PGE). By systematically varying the ratios of PLGA and gelatin, we could fine-tune fiber size and swelling upon hydration as well as the mechanical properties of the scaffolds. Of all PGE blends tested, PGE321 (PLGA, gelatin, elastin v/v/v ratios of 3:2:1) produced the smallest fiber size (317 ± 46 nm, 446 ± 69 nm once hydrated) and exhibited the highest Young's modulus (770 ± 131 kPa) and tensile strength (130 ± 7 kPa). All PGE scaffolds supported the attachment and metabolization of human endothelial cells (ECs) and bovine aortic smooth muscle cells (SMCs) with some variances in EC morphology and cytoskeletal spreading observed at 48 h postseeding, whereas no morphologic differences were observed at confluence (day 8). The rate of metabolization of ECs, but not of SMCs, was lower than that on tissue culture plastic and depended on the specific PGE composition. Importantly, PGE scaffolds were capable of guiding the organotypic distribution of ECs and SMCs on and within the scaffolds, respectively. Moreover, the EC monolayer generated on the PGE scaffold surface was nonthrombogenic and functional, as assessed by the basal and cytokine-inducible levels of mRNA expression and amidolytic activity of tissue factor, a key player in the extrinsic clotting cascade. Taken together, our data indicate the potential application of PGE scaffolds in vascular tissue engineering.