Cellulose tris(3,5-dimethylphenylcarbamate)-based chiral stationary phases as effective tools for enantioselective HPLC separation of structurally different disubstituted binaphthyls

Cellulose tris(3,5-dimethylphenylcarbamate)-based chiral stationary phases (CSPs) were used for a study of the HPLC retention and enantioseparation behavior of 2,2'-disubstituted or 3,2,2'-trisubstituted 1,1'-binaphthyls and 8,3'-disubstituted 1,2'-binaphthyls. The effects of the mobile phase composition in normal- (NP) and reversed-phase (RP) separation modes were investigated. The NP mobile phases contained n-hexane and propane-2-ol at various volume ratios, the RP ones were obtained by mixing acetonitrile with water or a 20 mM phosphate buffer of pH 6.0 or 3.0. The RP separation mode has been found more suitable for enantioresolution of most of the analytes. The best enantioseparation of 2,2'-diacetyl-1,1'-binaphthyl, 2-hydroxy-2'-(phenylamino)-1,1'-binaphthyl-3-carboxylic acid and 2-amino-2'-hydroxy-1,1'-binaphthyl-3-carboxylic acid was obtained in the mobile phase of ACN/20 mM phosphate buffer, pH 3.0, 40/60 (v/v), whereas N-(2'-hydroxy-1,1'-binaphthyl-2-yl)acetamide, N-(3'-methoxy-1,2'-binaphthyl-8-yl)acetamide, and N-(3'-hydroxy-1,2'-binaphthyl-8-yl)acetamide yielded better results in ACN/water at the same v/v ratio. The analyte-CSP interaction mechanism was found to be temperature independent but the enantioresolution improved at an elevated temperature. The mechanism of the enantioselective discrimination is discussed on the basis of the thermodynamic parameters obtained. Semi-preparative separation conditions have been proposed for 2-amino-2'-hydroxy-1,1'-binaphthyl-3-carboxylic acid, N-(3'-methoxy-1,2'-binaphthyl-8-yl)acetamide, and N-(3'-hydroxy-1,2'-binaphthyl-8-yl)acetamide.     

Determination of kanamycin in serum by solid-phase extraction,pre-capillary derivatization and capillary electrophoresis

An effective method based on solid-phase extraction (SPE) and capillary electrophoresis (CE) for the determination of kanamycin in human serum was developed and validated. Off-line SPE was employed for the isolation of kanamycin from serum on a carboxypropyl-bonded phase (CBA) weak cation-exchange cartridge. A mixture of 0.2 M borate (pH 10.5)-methanol (50:50, v/v) was used as analyte eluting solvent. After pre-capillary derivatization with o-phthalaldehyde/mercaptoacetic acid reagent, the sample was analyzed by CE with a separation buffer of 30 mM borax, pH 10.0, containing 16% (v/v) methanol. A linear response over the concentration range 5-40 microgram/ml was obtained with a detection limit of 2 microgram/ml. Intra-day and inter-day precision were 6.2 and 10.3% RSD, respectively. Recoveries of approximately 90% were found. For the determination of lower levels of kanamycin (<5 microgram/ml), NH(4)OH (25%, w/v)-methanol (30:70, v/v) was used for analyte elution. After evaporation, reconstitution and derivatization, the sample was analyzed by on-line field-amplified sample stacking (FASS) CE. Good linearity in the concentration range 0.4-5 microgram/ml was obtained with a detection limit of 0.1 microgram/ml. Intra-day and inter-day RSD were 3.4 and 11.2%, respectively. Recoveries of approximately 60% were found. The method was successfully applied to the analysis of kanamycin in sera of tuberculosis patients at peak level and trough level concentrations.     

Apparent monomer activity of saturated fatty acids im micellar bile salt solutions measured by a polyethylene partitioning system

Partitioning of saturated fatty acids between discs of polyethylene film and aqueous buffer has been characterized and subsequently used to measure monomer activities of fatty acids in micellar solutions of bile salt. Partitioning of fatty acids between polyethylene and buffer achieved equilibrium in about 24-48 hr. Partition coefficients for fatty acids 10:0 and 16:0 were essentially independent of concentration, as expected for true partitioning. Experiments with various pH buffers showed that only the protonated form of fatty acids 12:0 and 16:0 participated in partitioning, and the midpoints of the partition coefficients vs. pH curves were 4.5-5.0 and 6.5-7.0, respectively. Experimentally determined partition coefficients at pH 7.4 ranged from 2.03 +/- 0.09 for 9:0 to 56,100 +/- 13,850 for 17:0. The addition of each methylene group increased the partition coefficient by a factor of about 3.75, corresponding to an incremental free energy change for each methylene group of -3433 J.mole(-1) (-820 cal.mole(-1)). Monomer activities of solutions of 14:0 and 16:0 dissolved in 20 mM taurodeoxycholate were linearly dependent on the total fatty acid concentration. 1 mM 14:0 and 16:0 in 20 mM taurodeoxycholate had monomer activities of 1.3 x 10(-5) M and 5.6 x 10(-7) M, respectively. Solutions prepared with a constant concentration ratio of fatty acid to taurodeoxycholate had essentially constant monomer activities between 8 and 20 mM taurodeoxycholate. These studies support the hypothesis that fatty acid interaction with bile acid micelles is similar to a phase distribution system, so that some measurable monomer activity of fatty acid exists in equilibrium with the mass of fatty acid contained in the micelle.     

Solid phase synthesis and biological evaluation of enantiomerically pure wasp toxin analogues PhTX-343 and PhTX-12

PhTX-343 and PhTX-12, analogues of the natural polyamine wasp toxin PhTX-433, were synthesised in 40-60% yields as pure enantiomers using solid phase synthesis techniques. Capillary electrophoresis procedures were developed for chiral separation and determination of enantiomeric purity (ee) of the enantiomers of PhTX-343 and PhTX-12. The methods were optimised with respect to chiral selector, buffer pH, and temperature around the capillary. Thus, rac-PhTX-343 was resolved using a separation buffer containing 30 mM heptakis-(2, 6-di-O-methyl)-beta-cyclodextrin in 50 mM 6-aminocarproic acid (pH 4. 0) at 15 degrees C. rac-PhTX-12 was not resolvable in this system, but could be resolved using a separation buffer containing 10% w/v of dextrin 10, a linear maltodextrin, in 50 mM 6-aminocaproic acid (pH 4.0) at 15 degrees C. Using these methods, the optical purity of the synthetic enantiomers was determined to be ee > 99%. The enantiomers were also characterised by chiroptical methods. The antagonist potency of the enantiomers was tested on nicotinic acetylcholine receptors (human muscle-type nAChR) expressed in TE671 cells, ionotropic glutamate receptors in Xenopus laevis oocytes (expressing recombinant GluR1flop receptors), and locust muscle ionotropic glutamate receptors sensitive to quisqualate (qGluR). The potencies of each pair of enantiomers were similar (eudismic ratio close to 1).     

Determination of diterpenoid triepoxides in Tripterygium wilfordii by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatographic (MEKC) method has been established for the identification and determination of diterpenoid triepoxides in the Chinese herb Tripterygium wilfordii Hook F. and its preparations. Studies of the influence of boric acid and borax buffer concentration and pH, and of sodium dodecylsulphate (SDS) concentration have been carried out, and the optimum separation for the triepoxides was achieved using 20 mM boric acid and 10 mM borax with 20 mM SDS as the running buffer. MEKC was found to exhibit good accuracy, precision and repeatability. The sensitivity of the assay was sufficient to monitor the three active components in T. wilfordii and its preparations.     

Micellar electrokinetic chromatography with polyelectrolyte complexes as micellar pseudo-stationary phases

The separation of dansyl (DNS-AAs) and carbobenzoxy (CBZ-AAs) amino acids using micellar electrokinetic chromatography employing polyelectrolyte-surfactant complexes (PSC) formed in the reaction between polyacrylic acid (PAA) and dodecyltrimethylammonium bromide (DTAB) as pseudo-stationary phases was described. The PSCs were stabilized by hydrophobic interactions of alkyl chains of the surfactant ions and converted to an intramolecular micellar-like phase. The running buffer was a 50mM solution of sodium phosphate (pH 6.0) containing 4.6-20.2mM PSC, in which a part of carboxyl groups of PAA was blocked by aliphatic amines. For the systems with 7.9mM of PAA/DTAB complex (phi=0.30, phi-composition of water-soluble polyelectrolyte complex) as a pseudo-stationary phase, the peaks of six dansyl amino acids (DNS-AAs) were baseline resolved. The separation in this case is based on a complex distribution mechanism of the dansyl derivatives between the free buffer and the intramolecular micellar-like phase of the water-soluble PSC. On the other hand, the additives of PAA/DTAB complex (phi=0.30) to the running buffer does not essentially affect on the electrophoretic behaviour of the CBZ-AAs, the variant MEKC is not realized. The influence of the concentration of the complex of PAA/DTAB on the electrophoretic behaviour of analytes was investigated. Relative retentions and relative selectivities were used for describing electrophoretic behaviour of the amino acid derivatives.     

Selective separation and purification of two lipases from chromobacterium viscosum using AOT reversed micelles

Selective separation and purification of two lipases form Chromobacterium viscosum were carried out by liquid-liquid extraction using a reversed micellar system. Optimum parameters for extraction were determined using a 250 mM AOT micellar solution in isooctane. Complete separation of the two lipases was achieved at pH 6.0 with a 50mM potassium phosphate buffer solution containing 50 mM KCI. By adding 2.5% by volume of ethanol to the lipase-loaded micellar solution, 85% of the extracted lipase could be recovered in a new aqueous phase, 50 mM K(2)HPO(4) with 50 mM KCl, at pH 9.0. Lipase A was purified 2.6-fold with a recovery of 86%, and lipase B by 1.5-fold with a recovery of 76%.     

Determination of the intravesicular pH of fragmented sarcoplasmic reticulum with 5,5-dimethyl-2,4-oxazolidinedione.

The intravesicular pH (pHi) of fragmented sarcoplasmic reticulum (SR) of the skeletal muscle was determined from the distribution of 5,5-dimethyl-2,4-oxazolidinedione (DMO), a weak organic acid, between the intra- and extravesicular spaces. The pHi's thus obtained were found to be slightly lower (0.02-0.17 pH unit) than the pH's of the external medium (pHe) at pH 6.5-8.5 in the presence of 105 mM KCl and 40 mM Tris-maleate buffer. The higher the pHe, the greater the pH gradient. When pHe was changed, pHi attained equilibrium within about 20 min, the time necessary for the separation of the SR by centrifugation. When 0.25 M sucrose and 5 mM Tris-maleate buffer were used instead of 105 mM KCl and 40 mM buffer, the pH gradient increased to 0.56. It was also demonstrated by direct measurements of pHe with a glass-electrode pH meter that K+ ions added to the external medium exchanged the intravesicular H+ ions. From these results it appears that the pH gradient across the SR membrane was at the Donnan equilibrium. In this state, the Donnan potentials corresponding to pH gradients of 0.17 and 0.56 were -9.3 and -30.6 mV, respectively.     

Column-switching high-performance liquid chromatographic method for the determination of zaltoprofen in rat plasma

A direct injection column-switching high-performance liquid chromatography (HPLC) method was developed and validated for quantification of zaltoprofen in rat plasma. Following dilution with mobile phase A, i.e. acetonitrile-10mM potassium phosphate buffer (pH 6.8) (12:88, v/v) samples were directly injected to the pre-column without sample pre-purification step. After endogenous plasma components were eluted to waste, the system was switched and the analyte was eluted to the trap column. Zaltoprofen was then back-flushed to the analytical column for separation with mobile phase B, i.e. acetonitrile-10mM potassium phosphate buffer (pH 6.8) (35:65, v/v) and quantification with an ultraviolet detector at 230 nm. The calibration curve was linear in the concentration range of 40-5000 ngmL(-1). This method has been fully validated and shown to be specific, accurate and precise. The method is simple, rapid and the sample preparation is minimal and appears to be useful for the pharmacokinetic study of zaltoprofen.     

Radioassay of bile acid coenzyme A:glycine/taurine: N-acyltransferase using an n-butanol solvent extraction procedure

A rapid, specific, and sensitive radioassay for measuring bile acid CoA:glycine/taurine: N-acyltransferase (EC 2.3.1) has been developed. In this assay, 3H-labeled amino acids (glycine or taurine) are conjugated with unlabeled bile acid CoA derivatives to form 3H-labeled bile acid amidates. Following incubation, the 3H-labeled bile acid amidate is separated from the unreacted amino acid by an n-butanol extraction method. The extraction procedure was developed by evaluating the effects of buffer concentration and pH on the recovery of radiolabeled bile acid amidate standards in the presence of human hepatic cytosol. Highest recovery (greater than 90%) of bile acid amidate standards occurred under acidic conditions (pH 2) in the presence of 1% (w/v) SDS. When the radioassay and accompanying n-butanol extraction procedure were utilized to study the amidation of glycine or taurine with cholic acid in human hepatic cytosol, a single peak of radioactivity corresponding with either authentic glycocholate or taurocholate was detected in the n-butanol phase by high-performance liquid chromatography. This assay for bile acid CoA:glycine/taurine: N-acyltransferase activity was linear with incubation time and protein concentration. This assay should be useful in the biochemical studies of this enzyme, as well as in the examination of bile acid amidation in clinical liver specimens.     

Partial purification of human parathyroid hormone 1-84 as a thioredoxin fusion form in recombinant Escherichia coli by thermoosmotic shock

A modified purification method, thermoosmotic shock (osmotic shock coupled with heat-treatment) for heat-stable proteins, was devised in the purification of Trx-hPTH (1-84) (human parathyroid hormone coupled with thioredoxin as a fusion partner) from E. coli. Thermoosmotic shock can integrate the functions of extraction and crude separation of fusion protein Trx-hPTH (1-84). To improve the purification efficiency, thermoosmotic shock conditions were optimized and achieved as follows: the optimized high osmotic solution containing 20mM Tris-HCl buffer (pH 8.0), 1mM EDTA, and 25% sucrose; the low osmotic solution containing 20mM Tris-HCl buffer (pH 8.0), 1mM EDTA, and the heat-treatment temperature of 100 degrees C for 10 min. Using this method, the purity of Trx-hPTH (1-84) was up to 73% and the yield was up to 72%, respectively. In addition, the two separation methods of both thermoosmotic shock and affinity chromatography have been compared, indicating that thermoosmotic shock is an economical and feasible way for the fusion protein separation. Besides, the thermoosmotic shock method may be used for the purification of some proteins of thermal stability without N-terminal His-tag.     

Determination of indomethacin in plasma by micellar electrokinetic chromatography with UV detection for premature infants with patent ducts arteriosus

A simple and selective micellar electrokinetic chromatography (MEKC) is described for determination of indomethacin in plasma. Plasma proteins are precipitated by acetonitrile. An aliquot of supernatant was evaporated and reconstituted with Tris buffer for MEKC analysis. The separation of indomethacin was performed at 25 degrees C using a background electrolyte consisting of Tris buffer (30 mM; pH 8.0) with 100 mM sodium octanesulfonate (SOS) as an anionic surfactant. Under this condition, a good separation with high efficiency and short analysis time is achieved. Several parameters affecting the separation of indomethacin were studied, including pH and concentrations of the Tris buffer and SOS. The linear range of the method for the determination of indomethacin was over 0.3-10.0 microg/mL; the detection limit (signal-to-noise ratio=3; injection 0.5 psi 5s) was 0.1 microg/mL. The proposed method for determination of indomethacin in premature infants with patent ducts arteriosus has been demonstrated.     

DNA and buffers: are there any noninteracting, neutral pH buffers?

The interaction of DNA with various neutral pH, amine-based buffers has been analyzed by free solution capillary electrophoresis, using a mixture of a plasmid-sized DNA molecule and a small DNA oligonucleotide as the reporter system. The two DNAs migrate as separate, nearly Gaussian-shaped peaks in 20-80 mM TAE (TAE, Tris-acetate-EDTA; Tris, tris[hydroxymethyl]aminomethane) buffer. The separation between the peaks gradually increases with increasing TAE buffer concentration because of differences in solvent friction between large and small DNA molecules. The two DNAs form complexes with the borate ions in TBE (Tris-borate-EDTA) buffer, with mobilities that depend on the DNA/borate ratio. In 45 mM TBE buffer, the two DNAs comigrate as a single sharp peak, with a mobility that is faster than either of the constituent DNAs in the same buffer. Hence, the mixed DNA-borate complex is stabilized by the binding of additional borate ions, possibly forming bridges between the different DNAs. The mixed DNA-borate complex is gradually dissociated into its component DNAs by increasing the TBE concentration, possibly because the borate binding sites become saturated at high buffer concentrations. Other neutral pH, amine-based buffers, such as Mops (3-[N-morpholino]propanesulfonic acid), Hepes (N-[2-hydroxyethyl]piperazine-N'-[2-ethanesulfonic acid]), Bes (N,N-bis[2-hydroxyethyl]-2-aminoethanesulfonic acid), Tes (N-tris[hydroxymethyl]methyl-2-aminoethanesulfonic acid), and tricine (N-tris[hydroxymethyl]methylglycine) also form complexes with DNA, giving distorted peaks in the electropherograms. The combined results indicate that borate buffers and most neutral pH, amine-based buffers interact with DNA.     

Analysis of oligogalacturonic acids with 50 or fewer residues by high-performance anion-exchange chromatography and pulsed amperometric detection

Underivatized oligogalacturonic acids with a degree of polymerization (DP) ranging from 2 to 50 have been separated for the first time on a high-performance CarboPac PA1 pellicular anion-exchange stationary phase column. Baseline separation of these pectic fragments was accomplished using a nonlinear gradient of pH 6 potassium oxalate buffer as the mobile phase. Acetate buffer linear gradients were also useful as mobile phases, but only for separations of oligogalacturonic acids that were soluble in this solvent (DP less than 20). Additionally, oligogalacturonic acid separations were accomplished on a lower capacity AS4A stationary phase column. Triple pulse amperometric detection was selective, sensitive, and reproducible, nevertheless, oligogalacturonic acid response factors were affected by DP and compositional changes in the mobile phase.     

Separation of bisbenzylisoquinoline alkaloids by micellar electrokinetic chromatography

The micellar electrokinetic chromatographic (MEKC) separation of seven bisbenzylisoquinoline alkaloids has been developed. The effects of various separating factors were studied. Optimum separation was achieved using a buffer (pH 9.2) of 20 mM sodium borate and 20 mM sodium dihydrogen phosphate buffer containing 55 mM sodium cholate; the optimum voltage and injection time were 21 kV and 0.05 min, respectively. Highest peak efficiency was obtained when the analytes were dissolved in 10 mM sodium dodecyl sulphate as sample matrix for injection. The elution order of the bisbenzylisoquinoline alkaloids was related to their lipophilicity. The resolution, run time and detection limits of the MEKC method were compared with those of an HPLC method developed previously.     

Simultaneous analysis of several antiretroviral nucleosides in rat-plasma by high-performance liquid chromatography with UV using acetic acid/hydroxylamine buffer Test of this new volatile medium-pH for HPLC-ESI-MS/MS

Zalcitabine (ddC), lamivudine (3TC), didanosine (ddI), stavudine (d4T), carbovir (CBV), zidovudine (AZT), tenofovir (PMPA) and its administrated form (tenofovir diisoproxyl fumarate, TDF), are nucleosides currently approved in HIV therapy. To facilitate pharmacokinetics studies, a specific reversed-phase high-performance liquid chromatography (HPLC) method was developed for their analysis in rat plasma. The method involved a quantitative recovery of these drugs from rat plasma by solid-phase extraction on Oasis HLB Waters cartridges followed by optimised HPLC separation on an Atlantis dC18 column with acetic acid-hydroxylamine buffer (ionic strength 5mM, pH 7)-acetonitrile elution gradient. Quantitation was performed by HPLC/UV at 260 nm. Linear calibration curves were obtained within a 30-10,000 ng/mL plasma concentration range. Correlation coefficients (r2) greater than 0.992 were obtained by least-squares regression and limits of quantification were in 30-90 ng/mL concentration range. Quantitative parameters (accuracy, intra-day repeatability and inter-day reproducibility) yielded satisfactory results. Finally, a new buffer, obtained with acetic acid and hydroxylamine, has been tested in HPLC/ESI-MS/MS and appears to be an efficient volatile buffer in the medium 5-7 pH range. Indeed, at pH 7 and low ionic strength (5 mM), its buffer capacity is one hundred times higher to that obtained for the usual acetic acid/ammonia buffer.     

Micellar electrokinetic capillary chromatography for the determination of fluoxetine and its metabolite norfluoxetine in biological fluids

A micellar electrokinetic capillary chromatography (MEKC) for determining fluoxetine and its metabolite (norfluoxetine) is proposed. Optimal conditions for the quantitative separation were investigated. A background electrolyte solution consisting of 5 mM phosphate buffer adjusted to pH 12.3 and 40 mM of 1-decanesulfonic acid sodium salt (DSS), hydrodynamic injection and 25 kV of separation voltage were used. Good linearity and precision were obtained for both compounds. Detection limits of 0.2 mg/l for fluoxetine and norfluoxetine were obtained. The developed method is rapid and it has been applied to determine fluoxetine and its metabolite in human serum and urine. The samples were purified and enriched by means of extraction-preconcentration step with a preconditioned C18 cartridge and eluting the compounds with methanol.     

Determination of josamycin in rat plasma by capillary electrophoresis coupled with post-column electrochemiluminescence detection

A novel determination method for josamycin (JOS) based on capillary electrophoresis-electrochemiluminescence detection has been described. In this study, platinum disk electrode (300 microm in diameter) was used as a working electrode and the conditions affecting separation and detection were investigated in detail. Under optimal condition: 40 cm separation capillary (75 microm i.d.); 1.25 V applied potential on the Pt disc of the ECL detector cell; 5 mM Ru(bpy)3(2+) and 50mM phosphate buffer (pH 7.5) in the detection cell; 12 kV separation voltage; 8s injection time; 10 kV injection voltage and 15 mM running buffer (pH 7.5), calibration curve was linear over the range from 10 ng/mL to 5.0 microg/mL with a detection limit of 3.1 ng/mL at a signal-to-noise ratio of 3. The method can be successfully applied for the determination of josamycin in rat plasma in 6 min and the extraction recoveries with spiked plasma samples were over 92%.     

Optimization of the separation lactic acid enantiomers in body fluids by capillary electrophoresis

The optimization of the separation conditions of the two optical isomers of lactic acid by a factorial design is reported. Initially, different chiral selectors were systematically investigated and then a experimental design with three quantitative factors (cyclodextrin concentration and background buffer pH and concentration) were evaluated. Optimal conditions for obtaining a resolution higher than 1.5 were: phosphate buffer 200 mM at pH=6.0 with 413 mM 2-hydroxypropyl-beta-cyclodextrin added (HP-beta-CD), 20 degrees C, -20 kV of applied potential and polyacrylamide-coated capillary. The method was validated for the measurement in plasma and it was applied to the identification of both isomers in body fluids such as urine, amniotic fluid and cerebrospinal fluid. Samples were centrifuged and diluted (1:4) prior to the analysis.     

Separation of biologically active peptides by capillary electrophoresis and high-performance liquid chromatography

HPLC and CE have been applied to the separation of some newly synthesized substances, including nonapeptides from the intrachinary region of insulin, insulin-like growth factors I and II (IGF I and II) and some penta- and hexapeptides. All the peptides are satisfactorily separated using a reversed-phase HPLC system with a C₁₈ stationary phase and mobile phases of 20–40% acetonitrile (v/v) and 0.2% trifluoroacetic acid in water (v/v). The best CE separation of IGF I and II has been achieved in a 30 mM phosphate buffer (pH 4–5), whereas 150 mM phosphoric acid (pH 1.8) is optimal for the insulin nonapeptides. The latter electrolyte is also suitable for the CE separation of the hexapeptides, as is a micellar system containing 20 mM borate-50mM sodium dodecyl sulfate (pH 9.0). Complete CE resolution of the d- and l-forms is possible in a 50 mM phosphate buffer (pH 2.5) containing 10 mM β-cyclodextrin. UV spectrophotometric detection was used throughout, at wavelengths from 190 to 215 nm. The CE procedures are, in general, preferable to HPLC separations, as they exhibit better separation efficiencies, are faster and consume smaller amounts of analytes and reagents.