Comparison between long-range interactions and contact order in determining the folding rate of two-state proteins: application of long-range order to folding rate prediction.

The contact order is believed to be an important factor for understanding protein folding mechanisms. In our earlier work, we have shown that the long-range interactions play a vital role in protein folding. In this work, we analyzed the contribution of long-range contacts to determine the folding rate of two-state proteins. We found that the residues that are close in space and are separated by at least ten to 15 residues in sequence are important determinants of folding rates, suggesting the presence of a folding nucleus at an interval of approximately 25 residues. A novel parameter "long-range order" has been proposed to predict protein folding rates. This parameter shows as good a relationship with the folding rate of two-state proteins as contact order. Further, we examined the minimum limit of residue separation to determine the long-range contacts for different structural classes. We observed an excellent correlation between long-range order and folding rate for all classes of globular proteins. We suggest that in mixed-class proteins, a larger number of residues can serve as folding nuclei compared to all-alpha and all-beta proteins. A simple statistical method has been developed to predict the folding rates of two-state proteins using the long-range order that produces an agreement with experimental results that is better or comparable to other methods in the literature.     

Application of long-range order to predict unfolding rates of two-state proteins

Predicting the experimental unfolding rates of two-state proteins and models describing the unfolding rates of these proteins is quite limited because of the complexity present in the unfolding mechanism and the lack of experimental unfolding data compared with folding data. In this work, 25 two-state proteins characterized by Maxwell et al. (Protein Sci 2005;14:602–616) using a consensus set of experimental conditions were taken, and the parameter long-range order (LRO) derived from their three-dimensional structures were related with their experimental unfolding rates ln(k(u)). From the total data set of 30 proteins used by Maxwell et al. (Protein Sci 2005;14:602–616), five slow-unfolding proteins with very low unfolding rates were considered to be outliers and were not included in our data set. Except all beta structural class, LRO of both the all-alpha and mixed-class proteins showed a strong inverse correlation of r = -0.99 and -0.88, respectively, with experimental ln(k(u)). LRO shows a correlation of -0.62 with experimental ln(k(u)) for all-beta proteins. For predicting the unfolding rates, a simple statistical method has been used and linear regression equations were developed for individual structural classes of proteins using LRO, and the results obtained showed a better agreement with experimental results.     

Chain length is the main determinant of the folding rate for proteins with three-state folding kinetics

We demonstrate that chain length is the main determinant of the folding rate for proteins with the three-state folding kinetics. The logarithm of their folding rate in water (k(f)) strongly anticorrelates with their chain length L (the correlation coefficient being -0.80). At the same time, the chain length has no correlation with the folding rate for two-state folding proteins (the correlation coefficient is -0.07). Another significant difference of these two groups of proteins is a strong anticorrelation between the folding rate and Baker's "relative contact order" for the two-state folders and the complete absence of such correlation for the three-state folders.     

Entropy capacity determines protein folding

Search and study of the general principles that govern kinetics and thermodynamics of protein folding generate a new insight into the factors controlling this process. Here, based on the known experimental data and using theoretical modeling of protein folding, we demonstrate that there exists an optimal relationship between the average conformational entropy and the average energy of contacts per residue-that is, an entropy capacity-for fast protein folding. Statistical analysis of conformational entropy and number of contacts per residue for 5829 protein structures from four general structural classes (all-alpha, all-beta, alpha/beta, alpha+beta) demonstrates that each class of proteins has its own class-specific average number of contacts (class alpha/beta has the largest number of contacts) and average conformational entropy per residue (class all-alpha has the largest number of rotatable angles phi, psi, and chi per residue). These class-specific features determine the folding rates: alpha proteins are the fastest folding proteins, then follow beta and alpha+beta proteins, and finally alpha/beta proteins are the slowest ones. Our result is in agreement with the experimental folding rates for 60 proteins. This suggests that structural and sequence properties are important determinants of protein folding rates.     

Class-specific correlations between protein folding rate, structure-derived, and sequence-derived descriptors

Small single-domain proteins that fold by simple two-state kinetics have been shown to exhibit a wide variation in their folding rates. It has been proposed that folding mechanisms in these proteins are largely determined by the native-state topology, and a significant correlation between folding rate and measures of the average topological complexity, such as relative contact order (RCO), has been reported. We perform a statistical analysis of folding rate and RCO in all three major structural classes (alpha, beta, and alpha/beta) of small two-state proteins and of RCO in groups of analogous and homologous small single-domain proteins with the same topology. We also study correlation between folding rate and the average physicochemical properties of amino acid sequences in two-state proteins. Our results indicate that 1) helical proteins have statistically distinguishable, class-specific folding rates; 2) RCO accounts for essentially all the variation of folding rate in helical proteins, but for only a part of the variation in beta-sheet-containing proteins; and 3) only a small fraction of the protein topologies studied show a topology-specific RCO. We also report a highly significant correlation between the folding rate and average intrinsic structural propensities of protein sequences. These results suggest that intrinsic structural propensities may be an important determinant of the rate of folding in small two-state proteins.     

Protein folding rates estimated from contact predictions

Folding rates of small single-domain proteins that fold through simple two-state kinetics can be estimated from details of the three-dimensional protein structure. Previously, predictions of secondary structure had been exploited to predict folding rates from sequence. Here, we estimate two-state folding rates from predictions of internal residue-residue contacts in proteins of unknown structure. Our estimate is based on the correlation between the folding rate and the number of predicted long-range contacts normalized by the square of the protein length. It is well known that long-range order derived from known structures correlates with folding rates. The surprise was that estimates based on very noisy contact predictions were almost as accurate as the estimates based on known contacts. On average, our estimates were similar to those previously published from secondary structure predictions. The combination of these methods that exploit different sources of information improved performance. It appeared that the combined method reliably distinguished fast from slow two-state folders.     

Local secondary structure content predicts folding rates for simple,two-state proteins

Many single-domain proteins exhibit two-state folding kinetics, with folding rates that span more than six orders of magnitude. A quantity of much recent interest for such proteins is their contact order, the average separation in sequence between contacting residue pairs. Numerous studies have reached the surprising conclusion that contact order is well-correlated with the logarithm of the folding rate for these small, well-characterized molecules. Here, we investigate the physico-chemical basis for this finding by asking whether contact order is actually a composite number that measures the fraction of local secondary structure in the protein; viz. turns, helices, and hairpins. To pursue this question, we calculated the secondary structure content for 24 two-state proteins and obtained coefficients that predict their folding rates. The predicted rates correlate strongly with experimentally determined rates, comparable to the correlation with contact order. Further, these predicted folding rates are correlated strongly with contact order. Our results suggest that the folding rate of two-state proteins is a function of their local secondary structure content, consistent with the hierarchic model of protein folding. Accordingly, it should be possible to utilize secondary structure prediction methods to predict folding rates from sequence alone.     

Topological accessibility shows a distinct asymmetry in the folds of betaalpha proteins

A novel measure, called "topological accessibility" quantifies how easy it is to reconstruct a protein structure using only local contacts when starting at any point on the chain. Plotting this measure for all points in the chain gives a picture of how accessible the fold is. Simple folds are accessible from all positions, others are accessible only from limited positions while the most complex folds are not accessible from any position. The distribution of topological accessibility along the chain was found to be completely symmetric for the all-alpha and all-beta protein classes. However, for the betaalpha class, a distinct asymmetry was found (with probability 10(-30) of being due to chance). Examination of the proteins contributing to this signal indicated many that have an ancient origin. This suggests that the folds of these proteins may have become fixed under the influence of amino-terminal folding before the advent of chaperone assisted folding.     

Contact order revisited: influence of protein size on the folding rate

Guided by the recent success of empirical model predicting the folding rates of small two-state folding proteins from the relative contact order (CO) of their native structures, by a theoretical model of protein folding that predicts that logarithm of the folding rate decreases with the protein chain length L as L(2/3), and by the finding that the folding rates of multistate folding proteins strongly correlate with their sizes and have very bad correlation with CO, we reexamined the dependence of folding rate on CO and L in attempt to find a structural parameter that determines folding rates for the totality of proteins. We show that the Abs_CO = CO x L, is able to predict rather accurately folding rates for both two-state and multistate folding proteins, as well as short peptides, and that this Abs_CO scales with the protein chain length as L(0.70 +/- 0.07) for the totality of studied single-domain proteins and peptides.     

Folding rates and low-entropy-loss routes of two-state proteins

We develop a simple model for computing the rates and routes of folding of two-state proteins from the contact maps of their native structures. The model is based on the graph-theoretical concept of effective contact order (ECO). The model predicts that proteins fold by "zipping up" in a sequence of small-loop-closure events, depending on the native chain fold. Using a simple equation, with a few physical rate parameters, we obtain a good correlation with the folding rates of 24 two-state folding proteins. The model rationalizes data from Phi-value analysis that have been interpreted in terms of delocalized or polarized transition states. This model indicates how much of protein folding may take place in parallel, not along a single reaction coordinate or with a single transition state.     

More compact protein globules exhibit slower folding rates

We have demonstrated that, among proteins of the same size, alpha/beta proteins have on the average a greater number of contacts per residue due to their more compact (more "spherical") structure, rather than due to tighter packing. We have examined the relationship between the average number of contacts per residue and folding rates in globular proteins according to general protein structural class (all-alpha, all-beta, alpha/beta, alpha+beta). Our analysis demonstrates that alpha/beta proteins have both the greatest number of contacts and the slowest folding rates in comparison to proteins from the other structural classes. Because alpha/beta proteins are also known to be the oldest proteins, it can be suggested that proteins have evolved to pack more quickly and into looser structures.     

Reduced contact order and RNA folding rates

We investigated the relationship between RNA structure and folding rates accounting for hierarchical structural formation. Folding rates of two-state folding proteins correlate well with relative contact order, a quantitative measure of the number and sequence distance between tertiary contacts. These proteins do not form stable structures prior to the rate-limiting step. In contrast, most secondary structures are stably formed prior to the rate-limiting step in RNA folding. Accordingly, we introduce "reduced contact order", a metric that reflects only the number of residues available to participate in the conformational search after the formation of secondary structure. Plotting the folding rates and the reduced contact order from ten different RNAs suggests that RNA folding can be divided into two classes. To examine this division, folding rates of circularly permutated isomers are compared for two RNAs, one from each class. Folding rates vary by tenfold for circularly permuted Bacillus subtilis RNase P RNA isomers, whereas folding rates vary by only 1.2-fold for circularly permuted catalytic domains. This difference is likely related to the dissimilar natures of their rate-limiting steps.     

Unification of the folding mechanisms of non-two-state and two-state proteins

We have collected the kinetic folding data for non-two-state and two-state globular proteins reported in the literature, and investigated the relationships between the folding kinetics and the native three-dimensional structure of these proteins. The rate constants of formation of both the intermediate and the native state of non-two-state folders were found to be significantly correlated with protein chain length and native backbone topology, which is represented by the absolute contact order and sequence-distant native pairs. The folding rate of two-state folders, which is known to be correlated with the native backbone topology, apparently does not correlate significantly with protein chain length. On the basis of a comparison of the folding rates of the non-two-state and two-state folders, it was found that they are similarly dependent on the parameters that reflect the native backbone topology. This suggests that the mechanisms behind non-two-state and two-state folding are essentially identical. The present results lead us to propose a unified mechanism of protein folding, in which folding occurs in a hierarchical manner, reflecting the hierarchy of the native three-dimensional structure, as embodied in the case of non-two-state folding with an accumulation of the intermediate. Apparently, two-state folding is merely a simplified version of hierarchical folding caused either by an alteration in the rate-limiting step of folding or by destabilization of the intermediate.     

A simple measure of native-state topology and chain connectivity predicts the folding rates of two-state proteins with and without crosslinks

The folding rates of two-state proteins have been found to correlate with simple measures of native-state topology. The most prominent among these measures is the relative contact order (CO), which is the average CO, or localness, of all contacts in the native protein structure, divided by the chain length. Here, we test whether such measures can be generalized to capture the effect of chain crosslinks on the folding rate. Crosslinks change the chain connectivity and therefore also the localness of some of the native contacts. These changes in localness can be taken into account by the graph-theoretical concept of effective contact order (ECO). The relative ECO, however, the natural extension of the relative CO for proteins with crosslinks, overestimates the changes in the folding rates caused by crosslinks. We suggest here a novel measure of native-state topology, the relative logCO, and its natural extension, the relative logECO. The relative logCO is the average value for the logarithm of the CO of all contacts, divided by the logarithm of the chain length. The relative log(E)CO reproduces the folding rates of a set of 26 two-state proteins without crosslinks with essentially the same high correlation coefficient as the relative CO. In addition, it also captures the folding rates of eight two-state proteins with crosslinks.     

Transition state contact orders correlate with protein folding rates

We have used molecular dynamics simulations restrained by experimental phi values derived from protein engineering experiments to determine the structures of the transition state ensembles of ten proteins that fold with two-state kinetics. For each of these proteins we then calculated the average contact order in the transition state ensemble and compared it with the corresponding experimental folding rate. The resulting correlation coefficient is similar to that computed for the contact orders of the native structures, supporting the use of native state contact orders for predicting folding rates. The native contacts in the transition state also correlate with those of the native state but are found to be about 30% lower. These results show that, despite the high levels of heterogeneity in the transition state ensemble, the large majority of contributing structures have native-like topologies and that the native state contact order captures this phenomenon.     

Optimal relationship between average conformational entropy and average energy of interactions between residues for fast protein folding

Based on the known experimental data and using the theoretical modeling of protein folding, we demonstrate that there exists an optimal relationship between the average conformational entropy and the average energy of contacts per residue, that is an entropy capacity, for fast protein folding. Statistical analysis of conformational entropy and the number of contacts per residue for 5829 protein structures from four general structural classes (all-alpha, all-beta, +/-/beta, alpha+beta) demonstrates that each class of proteins has its own class-specific average number of contacts and average conformational entropy per residue. These class-specific features determine the folding rates: a proteins are the fastest folding proteins, then follow beta and alpha+beta proteins, and finally alpha/beta proteins are the slowest ones.     

Statistical analyses of protein folding rates from the view of quantum transition

Understanding protein folding rate is the primary key to unlock the fundamental physics underlying protein structure and its folding mechanism.Especially,the temperature dependence of the folding rate remains unsolved in the literature.Starting from the assumption that protein folding is an event of quantum transition between molecular conformations,we calculated the folding rate for all two-state proteins in a database and studied their temperature dependencies.The non-Arrhenius temperature relation for 16 proteins,whose experimental data had previously been available,was successfully interpreted by comparing the Arrhenius plot with the first-principle calculation.A statistical formula for the prediction of two-state protein folding rate was proposed based on quantum folding theory.The statistical comparisons of the folding rates for 65 two-state proteins were carried out,and the theoretical vs.experimental correlation coefficient was 0.73.Moreover,the maximum and the minimum folding rates given by the theory were consistent with the experimental results.     

Protein unfolding rates correlate as strongly as folding rates with native structure

Although the folding rates of proteins have been studied extensively, both experimentally and theoretically, and many native state topological parameters have been proposed to correlate with or predict these rates, unfolding rates have received much less attention. Moreover, unfolding rates have generally been thought either to not relate to native topology in the same manner as folding rates, perhaps depending on different topological parameters, or to be more difficult to predict. Using a dataset of 108 proteins including two-state and multistate folders, we find that both unfolding and folding rates correlate strongly, and comparably well, with well-established measures of native topology, the absolute contact order and the long range order, with correlation coefficient values of 0.75 or higher. In addition, compared to folding rates, the absolute values of unfolding rates vary more strongly with native topology, have a larger range of values, and correlate better with thermodynamic stability. Similar trends are observed for subsets of different protein structural classes. Taken together, these results suggest that choosing a scaffold for protein engineering may require a compromise between a simple topology that will fold sufficiently quickly but also unfold quickly, and a complex topology that will unfold slowly and hence have kinetic stability, but fold slowly. These observations, together with the established role of kinetic stability in determining resistance to thermal and chemical denaturation as well as proteases, have important implications for understanding fundamental aspects of protein unfolding and folding and for protein engineering and design.     

Influence of medium and long range interactions in protein folding.

Protein structures are stabilized by both local and long range interactions. In this work, we analyze the residue-residue contacts and the role of medium- and long-range interactions in globular proteins belonging to different structural classes. The results show that while medium range interactions predominate in all-alpha class proteins, long-range interactions predominate in all-beta class. Based on this, we analyze the performance of several structure prediction methods in different structural classes of globular proteins and found that all the methods predict the secondary structures of all-alpha proteins more accurately than other classes. Also, we observed that the residues occurring in the range of 21-30 residues apart contributes more towards long-range contacts and about 85% of residues are involved in long-range contacts. Further, the preference of residue pairs to the folding and stability of globular proteins is discussed.