Ran induces spindle assembly by reversing the inhibitory effect of importin alpha on TPX2 activity

The small GTPase Ran, bound to GTP, is required for the induction of spindle formation by chromosomes in M phase. High concentrations of Ran.GTP are proposed to surround M phase chromatin. We show that the action of Ran.GTP in spindle formation requires TPX2, a microtubule-associated protein previously known to target a motor protein, Xklp2, to microtubules. TPX2 is normally inactivated by binding to the nuclear import factor, importin alpha, and is displaced from importin alpha by the action of Ran.GTP. TPX2 is required for Ran.GTP and chromatin-induced microtubule assembly in M phase extracts and mediates spontaneous microtubule assembly when present in excess over free importin alpha. Thus, components of the nuclear transport machinery serve to regulate spindle formation in M phase.     

Slide-and-cluster models for spindle assembly

BACKGROUND: Mitotic and meiotic spindles are assemblies of microtubules (MTs) that form during cell division to physically separate sister chromosomes. How the various components of spindles act together to establish and maintain the dynamic bipolar structure of spindles is not understood. Interactions between MTs and motors have been studied both experimentally and theoretically in many contexts, including the self-organization of arrays of MTs by motors and the competition between different classes of motors to move a single load. This work demonstrates how the interplay between two types of motors together with continual nucleation of MTs by chromosomes could organize the MTs into spindles. RESULTS: We propose a slide-and-cluster model based on four known molecular activities: MT nucleation near chromosomes, the sliding of MTs by a plus-end-directed motor, the clustering of their minus ends by a minus-end-directed motor, and the loss of MTs by dynamic instability. Our model applies to overlapping, nonkinetochore MTs in anastral spindles, and perhaps also to interpolar MTs in astral spindles. We show mathematically that the slide-and-cluster mechanism robustly forms bipolar spindles with sharp poles and a stable steady-state length. This model accounts for several experimental observations that were difficult to explain with existing models. Three new predictions of the model were tested and verified in Xenopus egg extracts. CONCLUSIONS: We show that a simple two-motor model could create stable, bipolar spindles under a wide range of physical parameters. Our model is the first self-contained model for anastral spindle assembly and MT sliding (known as poleward flux). Our experimental results support the slide-and-cluster scenario; most significantly, we find that MT sliding slows near spindle poles, confirming the model's primary prediction.     

The spindle assembly checkpoint

The spindle assembly checkpoint monitors proper chromosome attachment to spindle microtubules and is conserved from yeast to humans. Checkpoint components reside on kinetochores of chromosomes and show changes in phosphorylation and localization as cells proceed through mitosis. Adaptation to prolonged checkpoint arrest can occur by inhibitory phosphorylation of Cdc2.     

BRCA1 is required for meiotic spindle assembly and spindle assembly checkpoint activation in mouse oocytes

BRCA1 as a tumor suppressor has been widely investigated in mitosis, but its functions in meiosis are unclear. In the present study, we examined the expression, localization, and function of BRCA1 during mouse oocyte meiotic maturation. We found that expression level of BRCA1 was increased progressively from germinal vesicle to metaphase I stage, and then remained stable until metaphase II stage. Immunofluorescent analysis showed that BRCA1 was localized to the spindle poles at metaphase I and metaphase II stages, colocalizing with centrosomal protein gamma-tubulin. Taxol treatment resulted in the presence of BRCA1 onto the spindle microtubule fibers, whereas nocodazole treatment induced the localization of BRCA1 onto the chromosomes. Depletion of BRCA1 by both antibody injection and siRNA injection caused severely impaired spindles and misaligned chromosomes. Furthermore, BRCA1-depleted oocytes could not arrest at the metaphase I in the presence of low-dose nocodazole, suggesting that the spindle checkpoint is defective. Also, in BRCA1-depleted oocytes, gamma-tubulin dissociated from spindle poles and MAD2L1 failed to rebind to the kinetochores when exposed to nocodazole at metaphase I stage. Collectively, these data indicate that BRCA1 regulates not only meiotic spindle assembly, but also spindle assembly checkpoint, implying a link between BRCA1 deficiency and aneuploid embryos.     

Requirement for proteolysis in spindle assembly checkpoint silencing

Anaphase initiation requires ubiquitin-dependent proteolysis of crucial substrates through activation of the ubiquitin ligase Anaphase Promoting Complex/Cyclosome (APC/C) in association with its coactivator Cdc20. To prevent chromosome segregation errors, effector proteins of a safeguard mechanism called spindle assembly checkpoint (SAC), Mad2 and BubR1, bind Cdc20 and restrain APC/C^Cdc20 activation until spindle assembly. Coordinated chromosome segregation also requires timely SAC inactivation. Spindle assembly appears necessary to silence SAC, however, how resolution of the SAC effector branch is achieved is still largely unknown. We show here that the complex between Mad2 and Cdc20 peaked at prometaphase in mammalian cells, while its dissociation proceeded along with spindle assembly and required proteolysis. Proteolysis did not appear required for assembly of metaphase spindles but rather needed for Mad2-Cdc20 complex resolution by promoting reversal of phosphorylations that maintain the complex. Indeed, in the absence of proteolysis, Mad2-Cdc20 complex dissociation was reversed by treatment with cyclin-dependent kinase or Aurora kinase inhibitors. Mad2-Cdc20 disassembly was, however, resistant to the potent PP1 and PP2A phosphatases inhibitor okadaic acid. We propose that SAC silencing in mammalian cells requires proteolysis-dependent activation of okadaic acid-resistant phosphatase(s) to reverse phosphorylations that lock the Mad2-Cdc20 complex.     

Distinct importin recognition properties of histones and chromatin assembly factors

The adhesive protein vitronectin (75 kDa) occurs in human blood fluid in a one-chain (Vn₇₅) or a two-chain form (Vn₆₅₊₁₀), and is produced by a specific cleavage (at Arg³⁷⁹–Ala³⁸⁰), by a proteinase not identified hitherto. These two forms were shown to be functionally different and therefore, this cleavage may have a regulatory significance in vivo. Here, we report the use of a tailored one-chain recombinant Vn, a specific protein kinase A phosphorylation at Ser³⁷⁸, and sequence analysis to show: (1) that none of the proteinases originating from blood, previously thought to be the endogenous proteinase (plasmin, thrombin, tPA, and uPA), is indeed the in vivo convertase; and (2) that furin, a serine endoproteinase residing in the secretory pathway of hepatocytes, where Vn is synthesized, specifically cleaves Vn at the endogenous cleavage site. Consequently, we propose that the Vn₇₅ to Vn₆₅₊₁₀ conversion takes place in the liver (not in blood) and is carried out by furin.     

Kinesin-related proteins required for assembly of the mitotic spindle

We identified two new Saccharomyces cerevisiae kinesin-related genes, KIP1 and KIP2, using polymerase chain reaction primers corresponding to highly conserved regions of the kinesin motor domain. Both KIP proteins are expressed in vivo, but deletion mutations conferred no phenotype. Moreover, kip1 kip2 double mutants and a triple mutant with kinesin-related kar3 had no synthetic phenotype. Using a genetic screen for mutations that make KIP1 essential, we identified another gene, KSL2, which proved to be another kinesin-related gene, CIN8. KIP1 and CIN8 are functionally redundant: double mutants arrested in mitosis whereas the single mutants did not. The microtubule organizing centers of arrested cells were duplicated but unseparated, indicating that KIP1 or CIN8 is required for mitotic spindle assembly. Consistent with this role, KIP1 protein was found to colocalize with the mitotic spindle.     

The centrosome and bipolar spindle assembly

In vertebrate somatic cells the centrosome functions as the major microtubule-organizing center (MTOC), which splits and separates to form the poles of the mitotic spindle. However, the role of the centriole-containing centrosome in the formation of bipolar mitotic spindles continues to be controversial. Cells normally containing centrosomes are still able to build bipolar spindles after their centrioles have been removed or ablated. In naturally occurring cellular systems that lack centrioles - such as plant cells and many oocytes - bipolar spindles form in the complete absence of canonical centrosomes. These observations have led to the notion that centrosomes play no role during mitosis. However, recent work has re-examined spindle assembly in the absence of centrosomes, both in cells that naturally lack them, and those that have had them experimentally removed. The results of these studies suggest that an appreciation of microtubule network organization- both before and after nuclear envelope breakdown (NEB) - is the key to understanding the mechanisms that regulate spindle assembly and the generation of bipolarity.     

Dynein-dependent transport of spindle assembly checkpoint proteins off kinetochores toward spindle poles

A predominant mechanism of spindle assembly checkpoint (SAC) silencing is dynein-mediated transport of certain kinetochore proteins along microtubules. There are still conflicting data as to which SAC proteins are dynein cargoes. Using two ATP reduction assays, we found that the core SAC proteins Mad1, Mad2, Bub1, BubR1, and Bub3 redistributed from attached kinetochores to spindle poles, in a dynein-dependent manner. This redistribution still occurred in metaphase-arrested cells, at a time when the SAC should be satisfied and silenced. Unexpectedly, we found that a pool of Hec1 and Mis12 also relocalizes to spindle poles, suggesting KMN components as additional dynein cargoes. The potential significance of these results for SAC silencing is discussed.     

Deficient spindle assembly checkpoint in multiple myeloma

Multiple myeloma (MM) is a hematological disease characterized by an abnormal accumulation of plasma cells in the bone marrow. These cells have frequent cytogenetic abnormalities including translocations of the immunoglobulin heavy chain gene and chromosomal gains and losses. In fact, a singular characteristic differentiating MM from other hematological malignancies is the presence of a high degree of aneuploidies. As chromosomal abnormalities can be generated by alterations in the spindle assembly checkpoint (SAC), the functionality of such checkpoint was tested in MM. When SAC components were analyzed in MM cell lines, the RNA levels of most of them were conserved. Nevertheless, the protein content of some key constituents was very low in several cell lines, as was the case of MAD2 or CDC20 in RPMI-8226 or RPMI-LR5 cells. The recovery of their cellular content did not substantially affect cell growth, but improved their ability to segregate chromosomes. Finally, SAC functionality was tested by challenging cells with agents disrupting microtubule dynamics. Most of the cell lines analyzed exhibited functional defects in this checkpoint. Based on the data obtained, alterations both in SAC components and their functionality have been detected in MM, pointing to this pathway as a potential target in MM treatment.     

Kinetochore stretching inactivates the spindle assembly checkpoint

The spindle assembly checkpoint (SAC) monitors the attachment of microtubules to the kinetochore and inhibits anaphase when microtubule binding is incomplete. The SAC might also respond to tension; however, how cells can sense tension and whether its detection is important to satisfy the SAC remain controversial. We generated a HeLa cell line in which two components of the kinetochore, centromere protein A and Mis12, are labeled with green and red fluorophores, respectively. Live cell imaging of these cells reveals repetitive cycles of kinetochore extension and recoiling after biorientation. Under conditions in which kinetochore stretching is suppressed, cells fail to silence the SAC and enter anaphase after a delay, regardless of centromere stretching. Monitoring cyclin B levels as a readout for anaphase-promoting complex/cyclosome activity, we find that suppression of kinetochore stretching delays and decelerates cyclin B degradation. These observations suggest that the SAC monitors stretching of kinetochores rather than centromeres and that kinetochore stretching promotes silencing of the SAC signal.     

Releasing the spindle assembly checkpoint without tension

Proteins of the Bcl-2 family are critical regulators of apoptosis, but how its BH3-only members activate the essential effectors Bax and Bak remains controversial. The indirect activation model suggests that they simply must neutralize all of the prosurvival Bcl-2 family members, whereas the direct activation model proposes that Bim and Bid must activate Bax and Bak directly. As numerous in vitro studies have not resolved this issue, we have investigated Bim''s activity in vivo by a genetic approach. Because the BH3 domain determines binding specificity for Bcl-2 relatives, we generated mice having the Bim BH3 domain replaced by that of Bad, Noxa, or Puma. The mutants bound the expected subsets of prosurvival relatives but lost interaction with Bax. Analysis of the mice showed that Bim''s proapoptotic activity is not solely caused by its ability to engage its prosurvival relatives or solely to its binding to Bax. Thus, initiation of apoptosis in vivo appears to require features of both models.