pH-sensitive hydrogel based on a novel photocross-linkable copolymer

A pH sensitive hydrogel has been prepared by a UV irradiation technique. Starting polymer was the PHM (poly hydroxyethylaspartamide methacrylated) obtained from polyaspartamide (PHEA) partially derivatized with methacrylic anhydride (MA). This new copolymer has been further derivatized with succinic anhydride (SA) to obtain PHM-SA that has been cross-linked by UV irradiation to form a pH sensitive hydrogel. The network, recovered after washing as a powder, has been been characterized by FT-IR spectrophotometry and particle size distribution analysis. Moreover, to have information about water affinity of the prepared sample, swelling measurements have been carried out in aqueous media mimicking biological fluids. The possibility to employ the prepared hydrogel as a pH-sensitive drug delivery system (DDS) has been investigated. In particular, ibuprofen ((S)(+)4-isobutyl-alpha-methylphenyl-acetic acid), chosen as a model drug, has been entrapped into the PHM-SA hydrogel, and in vitro release studies have showed that its release rate depends on different swelling of the network as a function of the environmental pH.     

Fabrication of hyaluronic acid hydrogel beads for cell encapsulation

Hyaluronic acid (HA) hydrogel beads were prepared by photopolymerization of methacrylated HA and N-vinylpyrrolidone using alginate as a temporal spherical mold. Various fabrication conditions for preparing the hydrogel beads, such as the concentration of methacrylated HA and UV irradiation time, were optimized to control swelling properties and enzymatic degradability. A new concept for cell encapsulation is proposed in this paper. Viable cells were directly injected into the hydrogel beads using a microinjection technique. When bovine articular chondrocytes were injected into HA hydrogel beads and cultivated for 1 week, the cells could proliferate well within the HA beads. HA hydrogel beads could be potentially used as injectable cell delivery vehicles for regenerating tissue defects.     

Synthesis and characterization of methacrylic derivatives of 5-amino salicylic acid with pH-sensitive swelling properties

The purpose of this study is to develop novel colon-specific drug delivery systems with pH-sensitive swelling and drug release properties. Methacrylic-type polymeric prodrugs with different content levels of 5-amino salicylic acid (5-ASA) were synthesized by free radical copolymerization of metacrylic acid (MAA), polyethylene glycol monomethacrylate (PEGMA), and a methacrylic derivative of 5-ASA (methacryloyloxyethyl 5-amino salicylate [MOES]). The copolymers were characterized, and the drug content of the copolymers was determined. The effect of copolymer composition on the swelling behavior and hydrolytic degradation was studied in simulated gastric fluid (SGF, pH 1.2) and simulated intestinal fluid (SIF, pH 7.2). The swelling and hydrolytic behavior of the copolymers was dependent on the content of MAA groups and caused a decrease in gel swelling in SGF or an increase in gel swelling in SIF. Drug release studies showed that increasing content of MAA in the copolymer enhances the hydrolysis in SIF but has no effect in SGF. The results suggest that hydrogen-bonded complexes are formed between MAA and PEG pendant groups and that these pH-sensitive systems could be useful for preparation of a controlled-release formulation of 5-ASA.     

Poly (l-lysine) based semi-interpenetrating polymer network as pH-responsive hydrogel for controlled release of a model protein drug streptokinase

With the aim of developing a pH-sensitive controlled drug release system, a poly (L-lysine) (PLL) based cationic semi-interpenetrating polymer network (semi-IPN) has been synthesized. This cationic hydrogel was designed to swell at lower pH and de-swell at higher pH and therefore be applicable for achieving regulated drug release at a specific pH range. In addition to the pH sensitivity, this hydrogel was anticipated to interact with an ionic drug, providing another means to regulate the release rate of ionic drugs. This semi-IPN hydrogel was prepared using a free-radical polymerization method and by crosslinking of the polyethylene glycol (PEG)-methacrylate polymer through the PLL network. The two polymers were penetrated with each other via interpolymer complexation to yield the semi-IPN structures. The PLL hydrogel thus prepared showed dynamic swelling/de-swelling behavior in response to pH change, and such a behavior was influenced by both the concentrations of PLL and PEG-methacrylate. Drug release from this semi-IPN hydrogel was also investigated using a model protein drug, streptokinase. Streptokinase release was found to be dependent on its ionic interaction with the PLL backbones as well as on the swelling of the semi-IPN hydrogel. These results suggest that a PLL semi-IPN hydrogel could potentially be used as a drug delivery platform to modulate drug release by pH-sensitivity and ionic interaction.     

Hydrogels of dihydroxypropyl chitosan crosslinked with irradiation at paste-like condition

In present study, a series of environmentally friendly hydrogel films were prepared from dihydroxypropyl chitosan (DHP-chitosan) using irradiation technique without any bifunctional crosslinking compounds. DHP-chitosan irradiated at high concentrated solution state (more than 10%, paste-like state) was found to introduce crosslinking structure. Crosslinking behavior, mechanical property, morphology, and swelling behavior of the hydrogel films were studied. It has been found that a concentration of 40% solution is the most effective for crosslinking. The hydrogel films of DHP-chitosan exhibited controllable mechanical property and typically pH-sensitive character in their swelling behavior. A preliminary biodegradation study confirmed that DHP-chitosan hydrogels also undergo biodegradation by enzymatic degradation test.     

Preparation and characterization of N-(2-carboxybenzyl)chitosan as a potential pH-sensitive hydrogel for drug delivery

A novel water-soluble chitosan derivative [N-(2-carboxybenzyl)chitosan, CBCS] was synthesized. The chemical structure of CBCS was characterized by FTIR, (1)H NMR and UV spectroscopies. The degree of substitution (DS) of N-2-carboxybenzyl was determined by colloid titration. In different pH buffer solutions, the swelling characteristics of hydrogels based on CBCS (CBCSG) prepared by crosslinking with glutaraldehyde have been studied. Results showed that the swelling ratio (SR) of CBCSG decreased with an increase of the amount of glutaraldehyde, and that CBCSG swelled more significantly in alkaline solution than in acidic medium, showing the lowest SR at pH5.0. The SR of CBCSG increased with the raising of the DS of the N-2-carboxybenzyl group in alkaline solution, but no significant change was observed in an acidic environment. CBCSG showed swelling reversibility when alternately soaked in pH1.0 and 7.4 buffer solutions. Release profiles of fluorouracil (5-FU), a poorly water-soluble drug, from CBCSG were studied under both simulated gastric and intestinal pHconditions. The release was much quicker in pH7.4 buffer than in pH1.0 solution. Results indicated that CBCS could be a potential pH-sensitive carrier for colon-specific drug delivery system.     

Synthesis and properties of thermo- and pH-sensitive poly(N-isopropylacrylamide)/polyaspartic acid IPN hydrogels

Various interpenetrating polymer network (IPN) hydrogels with sensitivity to temperature and pH were prepared by introducing the pH-sensitive polymer polyaspartic acid (PASP) hydrogel, into the poly(N-isopropylacrylamide) (PNIPAAm) hydrogel system for the purpose of improving its response rate to temperature. The morphologies and thermal behavior of the prepared IPN hydrogels were studied by both scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The IPN hydrogels showed a large and uneven porous network structure, without showing the common PNIPAAm hydrogel structure. The paper moreover studied their swelling properties, such as temperature dependence of equilibrium swelling ratio, shrinking kinetics, re-swelling kinetics and oscillatory swelling behavior in water. The swelling experiment results revealed that IPN hydrogels exhibited much faster shrinking and re-swelling in function of the composition ratio of the two network components. These fast responsive hydrogels foster potential applications in biomedical and biotechnology fields.     

Solid-phase synthesis and kinetic characterization of fluorogenic enzyme-degradable hydrogel cross-linkers

Of critical importance in drug delivery and tissue engineering applications is the degradability of implanted polymeric materials. The use of peptide-derived cross-linkers in hydrogel design is a valuable approach by which polymeric carriers can be endowed with enzymatic degradability in a predictable, "programmable" fashion. The solid-phase synthesis strategy described herein allows for an expeditious, flexible synthesis of bis-acrylamide-derivatized peptides with complex modifications, as exemplified by the incorporation of fluorophore and quencher moieties into a matrix metalloprotease (MMP)-degradable cross-linker. The crude synthetic product was obtained in high yield and purity and purified by standard methods; it was then used directly for polymerization without the need for tedious and often nonchemoselective solution-phase modifications. Functional appendages incorporated for detection provided a direct, quantitative link between enzymatic activity and hydrogel degradation using routine methods for identification of optimal enzyme-specific degradability.     

Sulfasalazine release from alginate-N,O-carboxymethyl chitosan gel beads coated by chitosan

In the present study, spherical beads were prepared from a water-soluble chitosan (N,O-carboxymethyl chitosan, NOCC) and alginate with ionic gelation method. Then, swollen calcium–alginate–NOCC beads were coated with chitosan. To prepare drug loaded beads, sulfasalazine (SA) was added to the initial aqueous polymer solution. The effect of coating, as well as drying procedure, on the swelling behavior of unloaded beads and SA release of drug loaded ones were evaluated in simulated gastrointestinal tract fluid. The rate of swelling and drug release were decreased for air-dried and coated beads in comparison with freeze-dried and uncoated ones, respectively. No burst release of drug was observed from whole tested beads. Chitosan coated beads released approximately 40% of encapsulated drug in simulated gastric and small intestine tract fluid. Based on these results, the chitosan coated alginate–NOCC hydrogel may be used as potential polymeric carrier for colon-specific delivery of sulfasalazine.     

Compatibility of cells of the nervous system with structured biodegradable chitosan-based hydrogel matrices

Hydrogel matrices for cell cultivation have been generated by two-photon laser polymerization of unsaturated chitosan derivatives and methacrylated hyaluronic acid. The adhesive and toxic properties of the matrices have been assessed, and the matrices have been shown to have a good compatibility with primary hippocampal cell cultures. The formation of morphologically normal neural networks by cells of the nervous system cultured on the surface of hydrogel matrices has been observed. The metabolic status of dissociated hippocampal cells cultured on the matrices was similar to that of the control cultures, as shown by the results of MTT reductase activity assay. Thus, matrices based on unsaturated polysaccharide derivatives crosslinked by laser irradiation showed good compatibility with differentiated cells of the nervous system and considerable potential for use in neurotransplantation.     

Preparation and characterization of konjac glucomannan–poly(acrylic acid) IPN hydrogels for controlled release

In this paper, we reported the synthesis and properties of interpenetrating polymer network (IPN) hydrogel systems designed for colon targeted drug delivery. The gels were composed of konjac glucomannan (KGM) and cross-linked poly(acrylic acid) (PAA) by N,N-methylene-bis-(acrylamide) (MBAAm). It was possible to modulate the swelling degree of the gels. And the swelling ratio has sensitive respondence to the environmental pH value variation. The degradation tests show that the hydrogels retain the enzymatic degradation character of KGM. In vitro release of model drug VB₁₂ was studied in the presence of Cellulase E0240 in pH 7.4 phosphate buffer at 37 °C. The accumulative release percent of the model drug reached 85.6% after 48 h and the drug release was controlled by the swelling and the degradation of the hydrogels. The results indicated that the IPN hydrogels can be exploited as potential carriers for colon-specific drug delivery.     

An approach to modulate degradation and mesenchymal stem cell behavior in poly(ethylene glycol) networks

A simple, sequential approach for creation of hydrolytically degradable poly(ethylene glycol) (PEG) hydrogels has been developed and characterized. The chemistry involves an initial step growth polymerization reaction between PEG-diacrylate and dithiothreitol (DTT) to form acrylate-terminated (-PEG-DTT-)n PEG chains, followed by photocross-linking to form a hydrogel network. Varying the extent of step growth polymerization prior to photocross-linking allowed for control over the equilibrium swelling ratio, degradation, and erosion of PEG hydrogels. Hydrogel degradability had a significant effect on behavior of human mesenchymal stem cells (hMSCs) encapsulated within PEG hydrogels, both in the presence and absence of an RGDSP cell adhesion ligand. In particular, enhanced network degradability resulted in enhanced hMSC viability and spreading during in vitro culture. Comparison of degradable and nondegradable hydrogels with similar physical properties (e.g., equilibrium swelling ratio) demonstrated that hMSC viability and spreading were dependent on network degradability. This study demonstrates that hydrolytically degradable PEG hydrogels can be formed via a sequential step growth polymerization and photocross-linking process and the resulting materials may serve as promising matrices for 3-dimensional stem cell culture and tissue engineering applications.     

Preparation and characterization of a novel pachyman-based pharmaceutical aid. II: A pH-sensitive,biodegradable and biocompatible hydrogel for controlled release of protein drugs

In this investigation, the fabrication, physico-chemical and biological characterization of a novel smart hydrogel had been evaluated for its potentials in effective controlling protein delivery. The hydrophilic pachyman-based hydrogel was generated facilely by crosslinking hydrosoluble carboxymethyl pachyman (CMP) with epichlorohydrin (ECH). The ECH concentration possessing maximum (99.7%) encapsulation efficiency and the most appropriate swelling characteristics was found to be 1.25% (w/v). The resultant hydrogel exhibited swelling ratios most favorable for drug release in simulated intestinal media. It could release two model protein drugs (bovine serum albumin and lysozyme) in the controlled manner and with full preservation of the protein stability and enzymatic activity. Importantly, the ECH-CMP hydrogel was confirmed to be biocompatible and biodegradable. From these findings, we were able to conclude that the synthesized pachyman-based hydrogel would be a promising delivery carrier candidate for site-specific delivery of protein drugs.     

Release of indomethacin from pH-sensitive pullulan acetate microsphere

We studied the pH-sensitive indomethacin (IND) delivery system using pullulan. Hydrophobic pullulan acetate was prepared by chemical modification of hydrophilic pullulan and pullulan acetate microsphere was made by a solvent evaporation method. The size of microspheres was below 5 μm, and the drug loading efficiencies of microspheres were approximately 78 and 65% at the initial amount of drug 40 and 80 mg, respectively. The microsphere showed pH-sensitive swelling behavior in PBS buffer. After 15 hrs, the swelling of the microsphere at pH 7.4 was approximately 20 times greater than that at pH1.2. The pH of the medium significantly influenced on thein vitro release rate. The released amount of drug at pH 7.2 was approximately 90 times greater than that at pH 1.2. The shape of microspheres at pH 1.2 were maintained sphere forms, but at pH 7.4 were disintegrated. The pH-sensitive IND release pattern was due both to the pH-sensitive diffusion of IND from the microspheres and to the release of the drug from the surface which underwent disintegration after swelling, due to the chemical composition of the microspheres and the pH of the release media.     

Photopolymerization of methacrylated chitosan/PNIPAAm hybrid dual-sensitive hydrogels as carrier for drug delivery

A series of hybrid hydrogels based on glycidyl methacrylated chitosan (CS-GMA) and N-isopropylacrylamide (NIPAAm) were designed and prepared via photopolymerization technology. The hydrogels were characterized by Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC) and optical transmittance. The interior morphology of hydrogels was investigated by scanning electron microscopy (SEM). The swelling experiment results revealed that hybrid hydrogel exhibited combined pH and temperature sensitivities. Acid orange 8 (AO8) and 5-flurouracil (5-Fu) were selected as model drugs for examining their release from hydrogels. The results suggested that hydrogel composition and pH value of buffer solution had great influences on release profiles.     

Drug loading into and drug release from pH- and temperature-responsive cylindrical hydrogels

Hydrogels that undergo deformation upon appropriate changes in pH or temperature have considerable promise as drug delivery vehicles. Drug uptake in swelling and nonswelling cylindrical hydrogels and drug release from these into a target fluid are investigated here. A mathematical model for hydrogel-solution composite, a composite of a distributed parameter system (cylindrical hydrogel) and a lumped parameter system (surrounding solution), is developed. The polymer network displacement in a swelling/deswelling hydrogel is described by a stress diffusion coupling model. The analytical solution for network displacement is used to predict solvent intake by swelling hydrogels, solvent efflux from deswelling hydrogels, and changes in pressure, porosity, and effective drug diffusivity. These in turn influence drug uptake during and after hydrogel swelling and drug release from hydrogel during and after deswelling. Numerical results illustrate benefits of hydrogel swelling for drug loading and merits of different modes of drug release. Drug uptake and drug release by temperature-responsive hydrogels are compared with those by hydrogels not subject to deformation.     

Study of the near-neutral pH-sensitivity of chitosan/gelatin hydrogels by turbidimetry and microcantilever deflection

The fundamental properties and pH-sensitivity of chitosan/gelating hydrogels were investigated using spectroscopic and microelectro mechanical (MEMS) measurement approaches. Turbidimetric titration revealed that there were electrostatic attractive interactions between tripolyphosphate (TPP), chitosan, and gelatin in the acidic pH range, depending on their degree of ionization. The pH-sensitive swelling behavior of the hydrogels was investigated by monitoring the deflection of hydrogel-coated microcantilevers, which exhibited a sensitive and repeatable response to solution pH. The deflection of the microcantilever increased as the pH decreased, and the response speed of the system exhibited a nearly linear relationship with pH. The effects of the pH and concentration of TPP solution, as well as the ratio of chitosan to gelatin in gel precursor solutions, on the pH sensitivity of the hydrogels were also investigated. It was found that the swelling of the hydrogel is mainly a result of chain relaxation of chitosan-TPP complexes caused by protonation of free amino groups in chitosan, which depends on the crosslinking density set during the formation of the network. An increase in initial crosslink density induced a decrease in swelling and pH sensitivity. It can be concluded from this study that pH-sensitive chitosan gel properties can be tuned by preparatory conditions and inclusion of gelatin. Furthermore, microcantilevers can be used as a platform for gaining increased understanding of environmentally sensitive polymers.     

Supramolecular gelation of a polymeric prodrug for its encapsulation and sustained release

A polymeric prodrug, PEGylated indomethacin (MPEG-indo), was prepared and then used to interact with α-cyclodextrin (α-CD) in their aqueous mixed system. This process could lead to the formation of supramolecular hydrogel under mild conditions and simultaneous encapsulation of MPEG-indo in the hydrogel matrix. For the formed supramolecular hydrogel, its gelation kinetics, mechanical strength, shear-thinning behavior and thixotropic response were investigated with respect to the effects of MPEG-indo and α-CD amounts by dynamic and steady rheological tests. Meanwhile, the possibility of using this hydrogel matrix as injectable drug delivery system was also explored. By in vitro release and cell viability tests, it was found that the encapsulated MPEG-indo could exhibit a controlled and sustained release behavior as well as maintain its biological activity.     

Novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate as a pH-sensitive hydrogel

A novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate blended with distinct salts (CaCl2, Na2HPO4, or NaCl), as a pH-sensitive hydrogel was developed for protein drug delivery. It was noted that the salts blended in hydrogels may affect the structures of an entangled network of methylcellulose and alginate and have an effect on their swelling characteristics. The methylcellulose/alginate hydrogel blended with 0.7 M NaCl (with a gelation temperature of 32 degrees C) demonstrated excellent pH sensitivity and was selected for the study of release profiles of a model protein drug (bovine serum albumin, BSA). In the preparation of drug-loaded hydrogels, BSA was well-mixed to the dissolved aqueous methylcellulose/alginate blended with salts at 4 degrees C and then gelled by elevating the temperature to 37 degrees C. This drug-loading procedure in aqueous environment at low temperature may minimize degradation of the protein drug while achieving a high loading efficiency (95-98%). The amount of BSA released from test hydrogels was a function of the amount of alginate used in the hydrogels. The amount of BSA released at pH 1.2 from the test hydrogel with 2.5% alginate was relatively low (20%), while that released at pH 7.4 increased significantly (86%). In conclusion, the methylcellulose/alginate hydrogel blended with NaCl could be a suitable carrier for site-specific protein drug delivery in the intestine.     

Design,Optimization, and Evaluation of a Novel Metronidazole-Loaded Gastro-Retentive pH-Sensitive Hydrogel

Floating pH-sensitive chitosan hydrogels containing metronidazole were developed for the eradication of Helicobacter pylori from the stomach. Hydrogels were prepared by crosslinking medium or high molecular weight chitosan in lyophilized solutions containing metronidazole using either citrate or tripolyphosphate (TPP) salts at 1% or 2% concentration. A 2³ factorial design was developed to study the influence of formulation parameters on the physical characteristics of the prepared hydrogels. The interaction between hydrogel components was investigated. The morphology of the prepared hydrogels was inspected and their percentage swelling, release pattern, and moisture content were evaluated. The results revealed the absence of interaction between hydrogel components and their highly porous structure. Percentage swelling of the hydrogels was much higher, and drug release was faster in gastric pH compared with intestinal pH. The formula prepared using 2% high molecular weight chitosan and 2% TPP significantly swelled (700%) within the first 4 h and released the loaded drug over a period of 24 h. Its moisture content was not affected by storage at high relative humidity. Therefore, this formula was selected to be tested in dogs for its gastric retention (using X-ray radiography) and efficacy in the eradication of H. pylori (using histopathological and microbiological examination). The results revealed that the prepared hydrogel formula was retained in dog stomach for at least 48 h, and it was more effective against H. pylori than the commercially available oral metronidazole tablets (Flagyl®).