Structure and refinement of the oxidized P21 form of uteroglobin at 1.64 A resolution

One of the monoclinic P21 forms of uteroglobin, a progesterone-binding protein secreted by the rabbit uterus, was crystallized and subjected to X-ray diffraction analysis at 1.64 A resolution. The analysis was refined to an R factor of 0.19 and the 1096 non-hydrogen atomic positions are known to an accuracy of about 0.18 A. The average isotropic temperature factor B was 10.4 A2. Uteroglobin is a dimer of two independent polypeptide chains of 70 residues linked by two disulfide bridges and related by a pseudo binary axis. Each monomer is folded into four alpha-helices. An oblong hydrophobic pocket is observed inside the dimer, and the possibility that it represents a progesterone-binding site is discussed. The present model includes 165 possible sites for water molecules, of which six are located in the hydrophobic pocket. Polar groups are involved in hydrogen bonding (intramolecular, intermolecular or with water molecules).     

Refinement of the structure of recombinant rat intestinal fatty acid-binding apoprotein at 1.2-A resolution.

The three-dimensional structure of the 131-residue rat intestinal fatty acid-binding protein, without bound ligand (apoI-FABP), has been refined with x-ray diffraction data to a nominal resolution of 1.19 A. The final model has a conventional crystallographic R-factor of 16.9% for 34,290 unique reflections [a root mean square (r.m.s.) deviation for bond length of 0.012 A and a r.m.s. deviation of 2.368 degrees for bond angles]. Ninety-two residues are present as components of the protein's 10 anti-parallel beta-strands while 14 residues are part of its two short alpha-helices. The beta-strands and alpha-helices are organized into two nearly orthogonal beta-sheets. Particular attention has been placed in defining solvent structure and the structures of discretely disordered groups in this protein. Two hundred thirty-seven solvent molecules have been identified; 24 are located within apoI-FABP. The refined model includes alternate conformers for 228 protein atoms (109 main-chain, 119 side-chain) and 63 solvent molecules. We have found several aromatic side-chains with multiple conformations located near, or in, the protein's ligand binding site. This observation, along with the fact that these side-chains have a temperature factor that is relatively higher than that of other aromatic residues, suggests that they may be involved in the process of noncovalent binding of fatty acid. The absence of a true hydrophobic core in I-FABP suggests that its structural integrity may be maintained primarily by a hydrogen bonding network involving protein and solvent atoms.     

Structure of a recombinant calmodulin from Drosophila melanogaster refined at 2.2-A resolution

The crystal structure of calmodulin (Mr 16,700, 148 residues) from Drosophila melanogaster as expressed in a bacterial system has been determined and refined at 2.2-A resolution. Starting with the structure of mammalian calmodulin, we produced an extensively refitted and refined model with a conventional crystallographic R value of 0.197 for the 5,239 reflections (F greater than or equal to 2 sigma (F)) within the 10.0-2.2-A resolution range. The model includes 1,164 protein atoms, 4 calcium ions, and 78 water molecules and has root mean square deviations from standard values of 0.018 A for bond lengths and 0.043 A for angle distances. The overall structure is similar to mammalian calmodulin, with a seven-turn central helix connecting the two calcium-binding domains. The "dumb-bell" shaped molecule contains seven alpha-helices and four "EF hand" calcium-binding sites. Although the amino acid sequences of mammalian and Drosophila calmodulins differ by only three conservative amino acid changes, the refined model reveals a number of significant differences between the two structures. Superimposition of the structures yields a root mean square deviation of 1.22 A for the 1,120 equivalent atoms. The calcium-binding domains have a root mean square deviation of 0.85 A for the 353 equivalent atoms. There are also differences in the amino terminus, the bend of the central alpha-helix, and the orientations of some of the side chains.     

Beta-lactamase of Bacillus licheniformis 749/C. Refinement at 2 A resolution and analysis of hydration

The crystallographic and molecular structure of the class A beta-lactamase (penicillinase) of Bacillus licheniformis 749/C has been refined with X-ray diffraction data to 2 A resolution. For the 27,330 data with F greater than or equal to 3 sigma(F), the R factor is 0.15; for all 30,090 data, R is 0.16. The estimated co-ordinate error is 0.15 A. In the final model, the deviation of covalent bonds and angles from ideality is 0.012 A and 2.2 degrees, respectively. The model includes two molecules of 29,500 daltons each in the asymmetric unit of space group P2(1), 484 water molecules and two tetrahedral buffer anions. Overlay of the two protein molecules results in a root-mean-square difference of 0.17 A and 0.41 A for alpha-carbon atoms and for all atoms, respectively. Twenty-six water molecules fall within 0.25 A of matching water molecules associated with the second protein molecule. The reactive Ser70 is on a turn of 3(10) helix at the N terminus of a longer alpha-helix (72-83). The penicillin-binding site near this helix contains at least seven water molecules. Upon penicillin entry, a water molecule in the oxyanion hole, hydrogen-bonded between the N terminus of helix (80-83) and beta-strand (230-238), would be displaced by the oxygen atom of the beta-lactam carbonyl group. An unexpelled molecule of water is proposed to be the catalytic water required for penicillin hydrolysis. The water is hydrogen-bonded to Glu166, a conserved residue in all beta-lactamases, and it lies 3 A from the alpha-face of a previously modeled penicillin. The position of the water-Glu166 pair is stabilized in the active site by a cis peptide bond at Pro167.     

Calmodulin structure refined at 1.7 A resolution.

We have determined and refined the crystal structure of a recombinant calmodulin at 1.7 A resolution. The structure was determined by molecular replacement, using the 2.2 A published native bovine brain structure as the starting model. The final crystallographic R-factor, using 14,469 reflections in the 10.0 to 1.7 A range with structure factors exceeding 0.5 sigma, is 0.216. Bond lengths and bond angle distances have root-mean-square deviations from ideal values of 0.009 A and 0.032 A, respectively. The final model consists of 1279 non-hydrogen atoms, including four calcium ions, 1130 protein atoms, including three Asp118 side-chain atoms in double conformation, 139 water molecules and one ethanol molecule. The electron densities for residues 1 to 4 and 148 of calmodulin are poorly defined, and not included in our model, except for main-chain atoms of residue 4. The calmodulin structure from our crystals is very similar to the earlier 2.2 A structure described by Babu and coworkers with a root-mean-square deviation of 0.36 A. Calmodulin remains a dumb-bell-shaped molecule, with similar lobes and connected by a central alpha-helix. Each lobe contains three alpha-helices and two Ca2+ binding EF hand loops, with a short antiparallel beta-sheet between adjacent EF hand loops and one non-EF hand loop. There are some differences in the structure of the central helix. The crystal packing is extensively studied, and facile crystal growth along the z-axis of the triclinic crystals is explained. Herein, we describe hydrogen bonding in the various secondary structure elements and hydration of calmodulin.     

The three-dimensional structure of a glutathione S-transferase from the mu gene class. Structural analysis of the binary complex of isoenzyme 3-3 and glutathione at 2.2-A resolution.

The crystal structure of a mu class glutathione S-transferase (EC 2.5.1.18) from rat liver (isoenzyme 3-3) in complex with the physiological substrate glutathione (GSH) has been solved at 2.2-A resolution by multiple isomorphous replacement methods. The enzyme crystallized in the monoclinic space group C2 with unit cell dimensions of a = 87.98 A, b = 69.41 A, c = 81.34 A, and beta = 106.07 degrees. Oligonucleotide-directed site-specific mutagenesis played an important role in the solution of the structure in that the cysteine mutants C86S, C114S, and C173S were used to help locate the positions of mercuric ion sites in nonisomorphous derivatives with ethylmercuric phosphate and to align the sequence with the model derived from MIR phases. A complete model for the protein was not obtained until part of the solvent structure was interpreted. The dimer in the asymmetric unit refined to a crystallographic R = 0.171 for 19,298 data and I > or = 1.5 sigma (I). The final model consists of 4150 atoms, including all non-hydrogen atoms of 434 amino acid residues, two GSH molecules, and oxygen atoms of 474 water molecules. The dimeric enzyme is globular in shape with dimensions of 53 x 62 x 56 A. Crystal contacts are primarily responsible for conformational differences between the two subunits which are related by a noncrystallographic 2-fold axis. The structure of the type 3 subunit can be divided into two domains separated by a short linker, a smaller alpha/beta domain (domain I, residues 1-82), and a larger alpha domain (domain II, residues 90-217). Domain I contains four beta-strands which form a central mixed beta-sheet and three alpha-helices which are arranged in a beta alpha beta alpha beta beta alpha motif. Domain II is composed of five alpha-helices. Domain I can be considered the glutathione binding domain, while domain II seems to be primarily responsible for xenobiotic substrate binding. The active site is located in a deep (19-A) cavity which is composed of three relatively mobile structural elements: the long loop (residues 33-42) of domain I, the alpha 4/alpha 5 helix-turn-helix segment, and the C-terminal tail. GSH is bound at the active site in an extended conformation at one end of the beta-sheet of domain I with its backbone facing the cavity and the sulfur pointing toward the subunit to which it is bound.(ABSTRACT TRUNCATED AT 400 WORDS)     

Structure of myohemerythrin in the azidomet state at 1.7/1.3 A resolution

The molecular model of myohemerythrin, an oxygen-carrying protein from sipunculan worms, has been refined by stereochemically restrained least-squares minimization at 1.7/1.3 A resolution to a conventional R-value of 0.158. The estimated positional standard deviation is better than 0.15 A for most of the 979 protein atoms. The average isotropic displacement parameter, B, for the protein atoms is 23.1 A2. This high average B parameter appears to be due to the overall motion of the molecule, which correlates with the observed anisotropic diffraction. The side-chains of seven residues were modeled in two conformations, i.e. the side-chains were discretely disordered, and B parameters for several lysine and glutamate side-chains indicate that they are poorly localized. Of the residues in myohemerythrin, 66% are helical, with 62% occurring in four long alpha-helices with mean values for the backbone torsion angles of phi = -65 degrees, psi = -42 degrees, and for the hydrogen bonds distances of N ... O, 3.0 A and H ... O, 2.1 A, and angles of N ... O = C, 153 degrees, N-H ... O, 157 degrees, and H ... O = C, 147 degrees. For two-thirds of the alpha-helical residues, the torsional rotation of the C alpha-C beta bond, chi 1, is approximately -60 degrees, and for one-third chi 1 is approximately 180 degrees. Although most turns in myohemerythrin are well-categorized by previous classification, two do not fit in established patterns. Also included in the refined model are three sulfate ions, all partially occupied, and 157 water molecules, 40% of which are modeled fully occupied. Only one water molecule is internal to the protein, the remainder occur on the surface and are observed principally between symmetry-related molecules contributing, along with van der Waals' contacts, most of the interactions between molecules. There are eight intermolecular protein-protein hydrogen bonds, of which only four are between well-located atoms.     

Refined structure of cytochrome c3 at 1.8 A resolution

The structure of cytochrome c3 from the sulfate-reducing bacterium Desulfovibrio vulgaris Miyazaki has been successfully refined at 1.8 A resolution. The crystallographic R factor is 0.176 for 9907 significant reflections. The isotropic temperature factors of individual atoms were refined and a total of 47 water molecules located on the difference map were incorporated in the refinement. The four heme groups are closely packed, with adjacent pairs of heme planes being nearly perpendicular to each other. The fifth and the sixth ligands of the heme iron atoms are histidine residues with N epsilon 2-Fe distances ranging from 1.88 A to 2.12 A. The histidine co-ordination to the heme iron is different for each heme group. The heme groups are all highly exposed to solvent, although the actual regions exposed differ among the hemes. The four heme groups are located in different environments, and the heme planes are deformed from planarity. The differences in the heme structures and their environments indicate that the four heme groups are non-equivalent. The chemical as well as the physical properties of cytochrome c3 should be interpreted in terms of the structural non-equivalence of the heme groups. The characteristic secondary structural non-equivalence of the heme groups. The characteristic secondary structures of the polypeptide chain of this molecule are three short alpha-helices, two short beta-strands and ten reverse turns.     

Refined crystal structure of dogfish M4 apo-lactate dehydrogenase

The crystal structure of M4 apo-lactate dehydrogenase from the spiny dogfish (Squalus acanthius) was initially refined by a constrained-restrained, and subsequently restrained, least-squares technique. The final structure contained 286 water molecules and two sulfate ions per subunit and gave an R-factor of 0.202 for difraction data between 8.0 and 2.0 A resolution. The upper limit for the co-ordinate accuracy of the atoms was estimated to be 0.25 A. The elements of secondary structure of the refined protein have not changed from those described previously, except for the appearance of a one-and-a-half turn 3(10) helix immediately after beta J. There is also a short segment of 3(10) helix between beta C and beta D in the part of the chain that connects the two beta alpha beta alpha beta units of the six-stranded parallel sheet (residues Tyr83 to Ala87). Examination of the interactions among the different elements of secondary structure by means of a surface accessibility algorithm supports the four structural clusters in the subunit. The first of the two sulfate ions is in the active site and occupies a cavity near the essential His195. Its nearest protein ligands are Arg171, Asp168 and Asn140. The second sulfate ion is located near the P-axis subunit interface. It is liganded by His188 and Arg173. These two residues are conserved in bacterial lactate dehydrogenase and form part of the fructose 1,6-bisphosphate effector binding site. Two other data sets in which one (collected at pH 7.8) or both (collected at pH 6.0) sulfate ions were replaced by citrate ions were also analyzed. Five cycles of refinement with respect to the pH 6.0 data (25 to 2.8 A resolution) resulted in an R value of 0.191. Only water molecules occupy the subunit boundary anion binding site at pH 7.8. The amino acid sequence was found to be in poor agreement with (2Fobs-Fcalc) electron density maps for the peptide between residues 207 and 211. The original sequence WNALKE was replaced by NVASIK. The essential His195 is hydrogen bonded to Asp168 on one side and Asn140 on the other. The latter residue is part of a turn that contains the only cis peptide bond of the structure at Pro141. The "flexible loop" (residues 97 to 123), which folds down over the active center in ternary complexes of the enzyme with substrate and coenzyme, has a well-defined structure. Analysis of the environment of Tyr237 suggests how its chemical modification inhibits the enzyme.     

Refined crystal structure of carboxypeptidase A at 1.54 A resolution

The crystal structure of bovine carboxypeptidase A (Cox) has been refined at 1.54 A resolution using the restrained least-squares algorithm of Hendrickson & Konnert (1981). The crystallographic R factor (formula; see text) for structure factors calculated from the final model is 0.190. Bond lengths and bond angles in the carboxypeptidase A model have root-mean-square deviations from ideal values of 0.025 A and 3.6 degrees, respectively. Four examples of a reverse turn like structure (the "Asx" turn) requiring an aspartic acid or asparagine residue are observed in this structure. The Asx turn has the same number of atoms as a reverse turn, but only one peptide bond, and the hydrogen bond that closes the turn is between the Asx side-chain CO group and a main-chain NH group. The distributions of CO-N and NH-O hydrogen bond angles in the alpha-helices and beta-sheet structures of carboxypeptidase A are centered about 156 degrees. A total of 192 water molecules per molecule of enzyme are included in the final model. Unlike the hydrogen bonding geometry observed in the secondary structure of the enzyme, the CO-O(wat) hydrogen bond angle is distributed about 131 degrees, indicating the role of the lone pair electrons of the carbonyl oxygen in the hydrogen bond interaction. Twenty four solvent molecules are observed buried within the protein. Several of these waters are organized into hydrogen-bonded chains containing up to five waters. The average temperature factor for atoms in carboxypeptidase A is 8 A2, and varies from 5 A2 in the center of the protein, to over 30 A2 at the surface.     

Three-dimensional structure of recombinant human muscle fatty acid-binding protein.

The three-dimensional structure of recombinant human muscle fatty acid-binding protein with a bound fatty acid has been solved and refined with x-ray diffraction data to 2.1 A resolution. The refined model has a crystallographic R factor of 19.5% for data between 9.0 and 2.1 A (7243 unique reflections) and root-mean-square deviations in bond length and bond angle of 0.013 A and 2.7 degrees. The protein contains 10 antiparallel beta-strands and two short alpha-helices which are arranged into two approximately orthogonal beta-sheets. Difference electron density maps and a multiple isomorphous derivative electron density map showed the presence of a single bound molecule of a long chain fatty acid within the interior core of the protein. The hydrocarbon tail of the fatty acid was found to be in a "U-shaped" conformation. Seven ordered water molecules were also identified within the interior of the protein in a pocket on the pseudo-si face of the fatty acid's bent hydrocarbon tail. The methylene tail of the fatty acid forms van der Waals interactions with atoms from 13 residues and three ordered waters. The carboxylate of the fatty acid is located in the interior of the protein where it forms hydrogen bonds with the side chains of Tyr128 and Arg126 and two ordered water molecules. A comparison of the three-dimensional structure of human muscle fatty acid-binding protein and rat intestinal fatty acid-binding protein shows strong similarity. Both proteins bind a single fatty acid within their interior cores, but the bound fatty acids are very different in their conformations and interactions. These findings suggest that the intestinal and muscle fatty acid-binding proteins have evolved distinct binding sites in order to satisfy different requirements within the tissues where they are expressed.     

Crystal structure of delta9 stearoyl-acyl carrier protein desaturase from castor seed and its relationship to other di-iron proteins.

The three-dimensional structure of recombinant homodimeric delta9 stearoyl-acyl carrier protein desaturase, the archetype of the soluble plant fatty acid desaturases that convert saturated to unsaturated fatty acids, has been determined by protein crystallographic methods to a resolution of 2.4 angstroms. The structure was solved by a combination of single isomorphous replacement, anomalous contribution from the iron atoms to the native diffraction data and 6-fold non-crystallographic symmetry averaging. The 363 amino acid monomer consists of a single domain of 11 alpha-helices. Nine of these form an antiparallel helix bundle. The enzyme subunit contains a di-iron centre, with ligands from four of the alpha-helices in the helix bundle. The iron ions are bound in a highly symmetric environment, with one of the irons forming interactions with the side chains of E196 and H232 and the second iron with the side chains of E105 and H146. Two additional glutamic acid side chains, from E143 and E229, are within coordination distance to both iron ions. A water molecule is found within the second coordination sphere from the iron atoms. The lack of electron density corresponding to a mu-oxo bridge, and the long (4.2 angstroms) distance between the iron ions suggests that this probably represents the diferrous form of the enzyme. A deep channel which probably binds the fatty acid extends from the surface into the interior of the enzyme. Modelling of the substrate, stearic acid, into this channel places the delta9 carbon atom in the vicinity of one of the iron ions.     

Restrained refinement of the monoclinic form of yeast phenylalanine transfer RNA. Temperature factors and dynamics, coordinated waters, and base-pair propeller twist angles

The structure of yeast phenylalanine transfer RNA in the monoclinic form has been further refined by using the restrained least-squares method of Hendrickson and Konnert. For the 4019 reflections between 10 and 3 A, with magnitudes at least 3 times their standard deviations, the R factor is 16.8%. The variation of the atomic temperature factors along the sequence indicates that the major flexibility regions are the amino acid and anticodon stems. The two strands of the amino acid helix exhibit large differential temperature factors, suggesting partial uncoiling or melting of the helix. In this work, the occupancy of all atoms was also varied. Residues D16 and D17 of the dihydrouridine loop as well as U33 and G37 of the anticodon loop have occupancies around 70%, indicating some local disorder or large-scale mobility at these positions. One hundred fifteen solvent molecules, including five magnesium ions, were found in difference maps. The role of several water molecules is clearly related to the stabilization of the secondary and tertiary interactions. The gold sites, which were not previously discussed, are described and show an energetically favored binding mode similar to that of cobalt and nickel complexes with nucleotides.     

Packed protein bilayers in the 0.90 A resolution structure of a designed alpha helical bundle.

A 12-residue peptide designed to form an alpha-helix and self-associate into an antiparallel 4-alpha-helical bundle yields a 0.9 A crystal structure revealing unanticipated features. The structure was determined by direct phasing with the "Shake-and-Bake" program, and contains four crystallographically distinct 12-mer peptide molecules plus solvent for a total of 479 atoms. The crystal is formed from nearly ideal alpha-helices hydrogen bonded head-to-tail into columns, which in turn pack side-by-side into sheets spanning the width of the crystal. Within each sheet, the alpha-helices run antiparallel and are closely spaced (9-10 A center-to-center). The sheets are more loosely packed against each other (13-14 A between helix centers). Each sheet is amphiphilic: apolar leucine side chains project from one face, charged lysine and glutamate side chains from the other face. The sheets are stacked with two polar faces opposing and two apolar faces opposing. The result is a periodic biomaterial composed of packed protein bilayers, with alternating polar and apolar interfaces. All of the 30 water molecules in the unit cell lie in the polar interface or between the stacked termini of helices. A section through the sheet reveals that the helices packed at the apolar interface resemble the four-alpha-helical bundle of the design, but the helices overhang parts of the adjacent bundles, and the helix crossing angles are less steep than intended (7-11 degrees rather than 18 degrees).     

The 2 A resolution structure of the sulfate-binding protein involved in active transport in Salmonella typhimurium

The crystal structure of the liganded form of the sulfate-binding protein, an initial receptor for active transport of sulfate in Salmonella typhimurium, has been solved and refined at 2.0 A resolution (1 A = 0.1 nm). The final model, which consists of 2422 non-hydrogen atoms, one sulfate substrate and 143 water molecules, yields a crystallographic R-factor of 14.0% for 16,959 reflections between 8 and 2 A. The structure deviates from ideal bond lengths and angle distances by 0.015 A and 0.037 A, respectively. The protein is ellipsoid with overall dimensions of 35 A x 35 A x 65 A and consists of two similar globular domains. The two domains are linked by three distinct peptide segments, which though widely separated in the amino acid sequence, are in close proximity in the tertiary structure. As these connecting segments are located near the periphery of the molecule, they further serve as the base or a "boundary" of the deep cleft formed between the two domains. Despite the unusual interdomain connectivity, both domains have similar supersecondary structure consisting of a central five-stranded beta-pleated sheet sandwiched by alpha-helices on either side. The arrangement of the two domains gives rise to the ellipsoidal shape and to the cleft between the two domains wherein the sulfate substrate is found and completely engulfed. A discovery of considerable importance is that the sulfate substrate is tightly held in place primarily by seven hydrogen bonds, five of which are donated by main-chain peptide NH groups, another by a serine hydroxyl and the last by the indole NH moiety of a tryptophan side-chain; there are no positively charged residues, nor cations, nor water molecules within van der Waals' distance to the sulfate dianion. All the main-chain peptide units associated with the sulfate are in turn linked (via the peptide CO group) to arrays of hydrogen bonds. Three of these arrays are composed of alternating peptide units and hydrogen bonds within the solvent-exposed part of three alpha-helices and two are linked to a histidine and an arginine residue. The sulfate-binding protein bears strong similarity to the structures of four other periplasmic binding proteins solved in our laboratory which are specific for L-arabinose, D-galactose/D-glucose, leucine/isoleucine/valine and leucine. The similarity includes the ellipsoidal shape and the two globular domain structures, each domain consisting of a central beta-pleated sheet flanked by alpha-helices.(ABSTRACT TRUNCATED AT 400 WORDS)     

Refined structure of porcine pepsinogen at 1.8 A resolution

The molecular structure of porcine pepsinogen at 1.8 A resolution has been determined by a combination of molecular replacement and multiple isomorphous phasing techniques. The resulting structure was refined by restrained-parameter least-squares methods. The final R factor [formula: see text] is 0.164 for 32,264 reflections with I greater than or equal to sigma (I) in the resolution range of 8.0 to 1.8 A. The model consists of 2785 protein atoms in 370 residues, a phosphoryl group on Ser68 and 238 ordered water molecules. The resulting molecular stereochemistry is consistent with a well-refined crystal structure with co-ordinate accuracy in the range of 0.10 to 0.15 A for the well-ordered regions of the molecule (B less than 15 A2). For the enzyme portion of the zymogen, the root-mean-square difference in C alpha atom co-ordinates with the refined porcine pepsin structure is 0.90 A (284 common atoms) and with the C alpha atoms of penicillopepsin it is 1.63 A (275 common atoms). The additional 44 N-terminal amino acids of the prosegment (Leu1p to Leu44p, using the letter p after the residue number to distinguish the residues of the prosegment) adopt a relatively compact structure consisting of a long beta-strand followed by two approximately orthogonal alpha-helices and a short 3(10)-helix. Intimate contacts, both electrostatic and hydrophobic interactions, are made with residues in the pepsin active site. The N-terminal beta-strand, Leu1p to Leu6p, forms part of the six-stranded beta-sheet common to the aspartic proteinases. In the zymogen the first 13 residues of pepsin, Ile1 to Glu13, adopt a completely different conformation from that of the mature enzyme. The C alpha atom of Ile1 must move approximately 44 A in going from its position in the inactive zymogen to its observed position in active pepsin. Electrostatic interactions of Lys36pN and hydrogen-bonding interactions of Tyr37pOH, and Tyr90H with the two catalytic aspartate groups, Asp32 and Asp215, prevent substrate access to the active site of the zymogen. We have made a detailed comparison of the mammalian pepsinogen fold with the fungal aspartic proteinase fold of penicillopepsin, used for the molecular replacement solution. A structurally derived alignment of the two sequences is presented.     

Structure of phosphate-free ribonuclease A refined at 1.26 A

The structure of phosphate-free bovine ribonuclease A has been refined at 1.26-A resolution by a restrained least-squares procedure to a final R factor of 0.15. X-ray diffraction data were collected with an electronic position-sensitive detector. The final model consists of all atoms in the polypeptide chain including hydrogens, 188 water sites with full or partial occupancy, and a single molecule of 2-methyl-2-propanol. Thirteen side chains were modeled with two alternate conformations. Major changes to the active site include the addition of two waters in the phosphate-binding pocket, disordering of Gln-11, and tilting of the imidazole ring of His-119. The structure of the protein and of the associated solvent was extensively compared with three other high-resolution, refined structures of this enzyme.     

Refined structure of rat Clara cell 17 kDa protein at 3.0 A resolution.

The rat Clara cell 17 kDa protein (previously referred to as the rat Clara cell 10 kDa protein) has been reported to inhibit phospholipase A2 and papain, and to also bind progesterone. It has been isolated from rat lung lavage fluid and crystallized in the space group P6(5)22. The structure has been determined to 3.0 A resolution using the molecular replacement method. Uteroglobin, whose amino acid sequence is 55.7% identical, was used as the search model. The structure was then refined using restrained least-squares and simulated annealing methods. The R-factor is 22.5%. The protein is a covalently bound dimer. Two disulfide bonds join the monomers together in an antiparallel manner such that the dimer encloses a large internal hydrophobic cavity. The hydrophobic cavity is large enough to serve as the progesterone binding site, but access to the cavity is limited. Each monomer is composed of four alpha-helices. The main-chain structure of the Clara cell protein closely resembles that of uteroglobin, but the nature of many of the exposed side-chains differ. This is true, particularly in a hypervariable region between residues 23 and 36, and in the H1H4 pocket.     

Structure of a B-DNA decamer with a central T-A step: C-G-A-T-T-A-A-T-C-G.

The X-ray crystal structure analysis of the decamer C-G-A-T-T-A-A-T-C-G has been carried out to a resolution of 1.5 A. The crystals are space group P2(1)2(1)2(1), cell dimensions a = 38.60 A, b = 39.10 A, c = 33.07 A. The structure was solved by molecular replacement and refined with X-PLOR and NUCLSQ. The final R factor for a model with 404 DNA atoms, 108 water molecules and one magnesium hexahydrate cation is 15.7%. The double helix is essentially isostructural with C-G-A-T-C-G-A-T-C-G, with closely similar local helix parameters. The structure of the T-T-A-A center differs from that found in C-G-C-G-T-T-A-A-C-G-C-G in that the minor groove in our decamer is wide at the central T-A step rather than narrow, and the twist angle of the T-A step is small (31.1 degrees) rather than large. Whereas the tetrad model provides a convenient framework for discussing local DNA helix structure, it cannot be the entire story. The articulated helix model of DNA structure proposes that certain sequence regions of DNA show preferential twisting or bending properties, whereas other regions are less capable of deformation, in a manner that may be useful in sequence recognition by drugs and protein. Further crystal structure analyses should help to delineate the precise nature of sequence-dependent articulation in the DNA double helix.