Chemotactic assay for biological effects of silver nanoparticles

A method is proposed for assessing the biocidal efficacy of water-dispersed nanoparticles of silver. It is based on negative chemotaxis of the plasmodia of the slime mold Physarum polycephalum. Biocidal and repellent effects were compared for silver nanoparticles, Ag⁺ ions, and AOT in solution and in the agar gel. In such characteristics as increasing the period of auto-oscillations of contractile activity, decreasing the area of spreading on substrate, and substrate preference in spatial tests, silver nanoparticles proved to be substantially more effective than Ag⁺ and AOT. The lethal concentrations of the nanoparticles were close to those found earlier for bacteria and viruses. The chemotactic tests allow quantitative assessment of the biological reaction and monitoring its dynamics; in resolution, they are superior to the tests based on the lethal action of biocidal agents.     

Silver nanoparticles: partial oxidation and antibacterial activities

The physical and chemical properties of silver nanoparticles that are responsible for their antimicrobial activities have been studied with spherical silver nanoparticles (average diameter approximately 9 nm) synthesized by the borohydride reduction of Ag+ ions, in relation to their sensitivity to oxidation, activities towards silver-resistant bacteria, size-dependent activities, and dispersal in electrolytic solutions. Partially (surface) oxidized silver nanoparticles have antibacterial activities, but zero-valent nanoparticles do not. The levels of chemisorbed Ag+ that form on the particle's surface, as revealed by changes in the surface plasmon resonance absorption during oxidation and reduction, correlate well with the observed antibacterial activities. Silver nanoparticles, like Ag+ in the form of AgNO3 solution, are tolerated by the bacteria strains resistant to Ag+. The antibacterial activities of silver nanoparticles are related to their size, with the smaller particles having higher activities on the basis of equivalent silver mass content. The silver nanoparticles aggregate in media with a high electrolyte content, resulting in a loss of antibacterial activities. However, complexation with albumin can stabilize the silver nanoparticles against aggregation, leading to a retention of the antibacterial activities. Taken together, the results show that the antibacterial activities of silver nanoparticles are dependent on chemisorbed Ag+, which is readily formed owing to extreme sensitivity to oxygen. The antibacterial activities of silver nanoparticles are dependent on optimally displayed oxidized surfaces, which are present in well-dispersed suspensions.     

Genus-wide physicochemical evidence of extracellular crystalline silver nanoparticles biosynthesis by Morganella spp

This study was performed to determine whether extracellular silver nanoparticles (AgNPs) production is a genus-wide phenotype associated with all the members of genus Morganella, or only Morganella morganii RP-42 isolate is able to synthesize extracellular Ag nanoparticles. To undertake this study, all the available Morganella isolates were exposed to Ag+ ions, and the obtained nanoproducts were thoroughly analyzed using physico-chemical characterization tools such as transmission electron microscopy (TEM), UV-visible spectrophotometry (UV-vis), and X-ray diffraction (XRD) analysis. It was identified that extracellular biosynthesis of crystalline silver nanoparticles is a unique biochemical character of all the members of genus Morganella, which was found independent of environmental changes. Significantly, the inability of other closely related members of the family Enterobacteriaceae towards AgNPs synthesis strongly suggests that AgNPs synthesis in the presence of Ag+ ions is a phenotypic character that is uniquely associated with genus Morganella.     

Triple helical polysaccharide-induced good dispersion of silver nanoparticles in water

Silver nanoparticles were constructed by using triple helical polysaccharide (lentinan) dissolved in water as matrix for the first time. The structure, morphology, and size of the nanocomposites in the polysaccharide aqueous solutions were investigated with UV-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and dynamic laser light scattering (DLS). The results revealed that the silver nanoparticles were attached to the polysaccharide chains through the strong noncovalent interactions, leading to the good dispersion of silver nanoparticles with mean radius of 6 nm in water. The silver nanoparticles were stable in the lentinan aqueous solution for 9 months. However, with an addition of NaOH, the polysaccharide with the imperfect helical structure broken partially by NaOH could aggregate in the alkali aqueous solution. The aggregation of the lentinan-bonded silver nanoparticles increased with an increase in the NaOH concentration, whereas the size of the silver nanoparticles barely changed, further confirming that the Ag nanoparticles were stable in this system. The aggregation was related to the conformation transition of the polysaccharide from the triple helix to random coil in the solution. A new method to detect the aggregates and aggregation rate was established according to the intensity of the maximum absorption peaks of the polysaccharide labeled by Ag nanoparticles in the UV spectrum.     

Valorization of mutant Bacillus licheniformis M09 supernatant for green synthesis of silver nanoparticles: photocatalytic dye degradation,antibacterial activity,and cytotoxicity

Bioprocess and Biosystems Engineering - The present study reports the optimization of a green method for the synthesis of silver nanoparticles (AgNPs) via reduction of Ag+ ions using...     

Crystallization of silver through reduction process using Elaeis guineensis biosolid extract

This study presents a special, economically valuable, unprecedented eco-friendly green process for the synthesis of silver nanoparticles. The silver nanoparticles were obtained from a waste material with oil palm biosolid extract as the reducing agent. The use of the oil palm biosolid extract for the nanoparticle synthesis offers the benefit of amenability for large-scale production. An aqueous solution of silver (Ag(+) ) ions was treated with the oil palm biosolid extract for the formation of Ag nanoparticles. The nanometallic dispersion was characterized by surface plasmon absorbance measuring 428 nm. Transmission electron microscopy showed the formation of silver nanoparticles in the range of 5-50 nm. Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction analysis of the freeze-dried powder confirmed the formation of metallic silver nanoparticles. Moreover, Fourier Transform Infrared Spectroscopy provided evidence of phenolics or proteins as the biomolecules that were likely responsible for the reduction and capping agent, which helps to increase the stability of the synthesized silver nanoparticles. In addition, we have optimized the production with various parameters.     

Conformational behavior of giant DNA through binding with Ag+ and metallization

The conformational behavior of a long single-chain double-stranded DNA in solutions of free silver ions and silver nanoparticles generated via the reduction of AgNO3 by NaBH4 was monitored by fluorescence and electron microscopies and UV spectroscopy. The interaction of monovalent silver ions with DNA induces shrinking of a DNA-coiled polymer chain as a result of a decrease in the DNA persistence length through the complexation of Ag+ with DNA bases. In contrast, the reduction of silver ions by NaBH4 in DNA solutions triggers DNA compaction: a DNA transition from elongated coil state into a compact state. This transition is continuous, unlike the all-or-none discrete DNA compaction that is commonly seen with multications. It is suggested that the collapse of DNA is accompanied by growth aggregation of silver nanoparticles generated on the DNA template.     

Short-term exposure to waterborne free silver has acute effects on membrane current of Xenopus oocytes

Waterborne free silver can cause osmo- and ionoregulatory disturbances in freshwater organisms. The effects of a short-term exposure to extracellular Ag+ ions on membrane currents were investigated in voltage-clamped defolliculated Xenopus oocytes. At a holding potential of -60 mV, ionic silver (1 microM Ag+) increased inward currents (=I(Ag)) from -8+/-2 nA to -665+/-41 nA (n=74; N=27). I(Ag) activated within 2 min of silver exposure and then rose impetuously. This current was largely reversible by washout and repeatable. I(Ag) reversed around -30 mV and rectified slightly at more positive potentials. Na+-free bath conditions reduced the silver-induced current to a smaller but sustained current. The response to silver was abolished by the Cl- channel blockers DIDS and SITS, whereas niflumic acid strongly potentiated I(Ag). Intraoocyte injection of AgNO3 to about 1 mM [Ag]i strongly potentiated I(Ag). Extracellular application of either dithiothreitol (DTT), a compound known to reduce disulfide bridges, or L-cysteine abolished Ag+-activated increase of membrane current. In contrast, n-ethylmaleimide (NEM) which oxidizes SH-groups potentiated I(Ag). Hypoosmotic bath solution significantly increased I(Ag) whereas hyperosmolar conditions attenuated I(Ag). The activation of I(Ag) was largely preserved after chelation of cytosolic Ca2+ ions with BAPTA/AM. Taken together, these data suggest that Xenopus oocytes are sensitive to short-term exposure to waterborne Ag+ ions and that the elicited membrane currents result from extra- and intracellular action of Ag+ ions on peptide moieties at the oocyte membrane but may also affect conductances after internalization.     

Antibacterial activity of plastics coated with silver-doped organic-inorganic hybrid coatings prepared by sol-gel processes

Silver-doped organic-inorganic hybrid coatings were prepared starting from tetraethoxysilane- and triethoxysilane-terminated poly(ethylene glycol)-block-polyethylene by the sol-gel process. They were applied as a thin layer (0.6-1.1 microm) to polyethylene (PE) and poly(vinyl chloride) (PVC) films and the antibacterial activity of the coated films was tested against Gram-negative (Escherichia coli ATCC 25922) and Gram-positive (Staphylococcus aureus ATCC 6538) bacteria. The effect of several factors (such as organic-inorganic ratio, type of catalyst, time of post-curing, silver ion concentration, etc.) was investigated. Measurements at different contact times showed a rapid decrease of the viable count for both tested strains. The highest antibacterial activity [more than 6 log reduction within 6 h starting from 106 colony-forming units (cfu) mL-1] was obtained for samples with an organic-inorganic weight ratio of 80:20 and 5 wt % silver salt with respect to the coating. For the coatings prepared by an acid-catalyzed process, a high level of permanence of the antibacterial activity of the coated films was demonstrated by repeatedly washing the samples in warm water or by immersion in physiological saline solution at 37 degrees C for 3 days. The release of silver ions per square meter of coating is very similar to that previously observed for polyamides filled with metallic silver nanoparticles; however, when compared on the basis of Ag content, the concentration of silver ions released from the coating is much higher than that released from 1 mm thick specimens of polyamide (PA) filled with silver nanoparticles. Transparency and good adhesion of the coating to PE and PVC plastic substrates without any previous surface treatment are further interesting features.     

The removal of mercury (II) from water by Ag supported on nanomesoporous silica

In this study, the synthesis of SBA-15/Ag nanocomposite materials with different amounts of silver (2.5, 5, and 10 %) has been investigated under acidic conditions by using P123 as a template via the direct method. The nanocomposites of SBA-15 were synthesized by the same method and by the addition of silver salt. Finally, the nanocomposite materials were examined for the removal of mercury ions from wastewater as an adsorbent by the reverse titration method. Characterization was carried out through x-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N₂ adsorption-desorption (Brunauer–Emmett–Teller). XRD spectra confirmed the presence of silver nanoparticles within the amorphous silica matrix of SBA-15. The Barrett–Joyner–Halenda analysis showed that SBA-15 and SBA-15/Ag have a narrow pore size distribution. SEM images demonstrated that the morphology of the matrix of SBA-15 is in spherical state. Furthermore, wavelength dispersive x-ray spectroscopy identified the presence and distribution of silver nanoparticles inside the pore channels and outside of them. Typical TEM images of SBA-15 and SBA-15/Ag (5 wt.%) indicated a regular hexagonal pore structure with long-range order and long channels. In SBA-15/Ag (5 wt.%) sample, the nanoparticles of silver was found into the pores and outside of them. The removal of mercury ions from wastewater using mesoporous silica nanocomposite containing silver nanoparticles was studied by the reverse titration analysis. The best capacity of adsorption of mercury ions from wastewater was obtained for SBA-15/Ag (5 wt.%) sample, which was equal to 42.26 mg/g in 20 min at pH of 7. The Freundlich model was used to explain the adsorption characteristics for the heterogeneous surface, and \( {K}_{\mathrm{f}} \) (adsorption capacity) and n (adsorption intensity) were determined for Hg (II) ion adsorption on SBA-15/Ag nanocomposite materials with different amounts of silver (2.5, 5, and 10 %). The value of R ² was about 0.99, 0.99, 0.98, and 0.98 and K _f was about 42, 48, 58, and 58 mg/g for SBA-15/Ag, SBA-15/Ag (2.5 %), SBA-15/Ag (5 %), and SBA-15/Ag (10 %), respectively. Furthermore, the values of n >1 show a favorable adsorption process for Hg (II) ion adsorption on SBA-15/Ag nanocomposite materials. Moreover, the Langmuir isotherm model evaluation showed that the correlation coefficients for all concentrations were R ² >0.99, indicating that Hg (II) ions were adsorbed on the surface of SBA-15/Ag via chemical and physical interaction. Additionally, the analytic hierarchy process (AHP) and Technique of Order Preference Similarity to the Ideal Solution (TOPSIS) methods that depend on the criteria of the surface area, amount of adsorbent, pore volume, and cost of synthesis were used. The evaluation of results showed that the best sample was SBA-15/Ag (5 wt.%). Furthermore, the research work highlighted the antibacterial nanocomposite with suitable adsorption of Hg (II) ions from water solutions and supported its potential for environmental applications. This nanocomposite can be used in the absorption domain of Hg (II) ions from water solutions.     

Antimicrobial cellulose acetate nanofibers containing silver nanoparticles

It was found for the first time that polymer nanofibers containing Ag nanoparticles on their surface could be produced by UV irradiation of polymer nanofibers electrospun with small amounts of silver nitrate (AgNO₃). When the cellulose acetate (CA) nanofibers electrospun from CA solutions with 0.5 wt% of AgNO₃ were irradiated with UV light at 245 nm, Ag nanoparticles were predominantly generated on the surface of the CA nanofibers. The number and size of the Ag nanoparticles were continuously increased up to 240 min. The Ag⁺ ions and Ag clusters diffused and aggregated on the surface of the CA nanofibers during the UV irradiation. The Ag nanoparticles with an average size of 21 nm exhibited strong antimicrobial activity.     

Formation of Nanoscale Elemental Silver Particles via Enzymatic Reduction by Geobacter sulfurreducens

Geobacter sulfurreducens reduced Ag(I) (as insoluble AgCl or Ag⁺ ions), via a mechanism involving c-type cytochromes, precipitating extracellular nanoscale Ag(0). These results extend the range of metals known to be reduced by Geobacter species and offer a method for recovering silver from contaminated water as potentially useful silver nanoparticles.     

Synthesis of Silver and Gold Nanoparticles Using Cashew Nut Shell Liquid and Its Antibacterial Activity Against Fish Pathogens

This study reveals a green process for the production of multi-morphological silver (Ag NPs) and gold (Au NPs) nanoparticles, synthesized using an agro-industrial residue cashew nut shell liquid. Aqueous solutions of Ag⁺ ions for silver and chloroaurate ions for gold were treated with cashew nut shell extract for the formation of Ag and Au NPs. The nano metallic dispersions were characterized by measuring the surface plasmon absorbance at 440 and 546 nm for Ag and Au NPs. Transmission electron microscopy showed the formation of nanoparticles in the range of 5–20 nm for silver and gold with assorted morphologies such as round, triangular, spherical and irregular. Scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction analyses of the freeze-dried powder confirmed the formation of metallic Ag and Au NPs in crystalline form. Further analysis by Fourier transform infrared spectroscopy provided evidence for the presence of various biomolecules, which might be responsible for the reduction of silver and gold ions. The obtained Ag and Au NPs had significant antibacterial activity, minimum inhibitory concentration and minimum bactericidal concentration on bacteria associated with fish diseases.     

Interaction of Ag+ ions with ribonucleotides of canonical bases]

The interaction of Ag+ ions with ribonucleotides of canonical bases in aqueous solution was studied by differential UV spectroscopy. Atoms coordinating silver ions (N7, O6 of guanosine 5'-monophosphate, N3, O2 of cytidine 5'-monophosphate, N7, N1, N3 of adenosine 5'-monophosphate and N3 of uridine 5'-monophosphate) and the binding constants characterizing the formation of appropriate complexes were determined. The differences in the relative affinity of Ag+ ions for the atoms of nucleotide bases correlate with the potential on them.     

Spectral Investigations on the Fluorescence Quenching of 1,4-dihydroxy-2,3-dimethylanthracene-9,10-dione by Plasmonic Silver Nanoparticles

Silver nanoparticles (Ag NPs) of different sizes have been prepared by Lee and Meisel’s method using trisodium citrate as reducing agent under ultra sonication. Optical absorption and fluorescence emission techniques were employed to investigate the interaction of 1,4-dihydroxy-2,3-dimethyl anthracene-9,10-dione (DHDMAD) with silver nanoparticles. In fluorescence spectroscopic study, we used the DHDMAD and Ag NPs as component molecules for construction of Förster Resonance Energy Transfer (FRET), whereas DHDMAD serve as donor and Ag NPs as acceptor. The surface plasmon resonance (SPR) peak of the prepared silver colloidal solution was observed from 419 nm to 437 nm. The synthesized silver nanoparticles at different heating time intervals were spherical in shape about the size of 25 nm and 55 nm. The fluorescence interaction between silver nanoparticles and DHDMAD confirms the FRET mechanism. According to Förster theory, the distance between silver nanoparticles and DHDMAD and the critical energy transfer distance were calculated and it is increase with heating time.     

Influence of Plasmonic Silver Nanoparticles on Fluorescence Quenching of 1,4-dihydroxy-3-methylanthracene-9,10-dione

Optical absorption and fluorescence emission techniques were employed to investigate the size effects of silver nanoparticles (Ag NPs) on 1,4-dihydroxy-3-methylanthracene-9,10-dione (DHMAD). Silver nanoparticles of different sizes were prepared by Creighton method under microwave irradiation. The prepared Ag NPs show the surface plasmon band around 400 nm. Fluorescence quenching of DHMAD by Ag NPs was found to increase with an increase in the size of Ag NPs. The fluorescence quenching is explained by resonant energy transfer mechanism between DHMAD and Ag NPs, orientation of DHMAD on silver nanoparticles through chemisorptions. The Stern–Volmer quenching constant and Benesi–Hildebrand association constant for the above system were calculated. DFT calculations were also performed to study the ground and excited state behavior of DHMAD and DHMAD + Ag system.     

Synthesis of methylcellulose-silver nanocomposite and investigation of mechanical and antimicrobial properties

In this paper we reported preparation of methylcellulose-silver nanocomposite films by mixing of aqueous solution of methylcellulose with silver nitrate followed by casting. The silver nanoparticles were generated in methylcellulose matrix through reduction and stabilization by methylcellulose. The surface plasmon band at 412nm indicated the formation of Ag nanoparticles. The MC-Ag nanocomposite films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR). The X-ray diffraction analysis of synthesized MC-Ag nanocomposite films revealed that metallic silver was present in face centered cubic crystal structure. Average crystallite size of silver nanocrystal was 22.7nm. The FTIR peaks of as-synthesized MC-Ag nanocomposite fully designated the strong interaction between Ag nanoparticles and MC matrix. Nano-sized silver modified methylcellulose showed enhanced mechanical properties i.e. the introduction of Ag leading to both strengthening and toughening of MC matrix. The methylcellulose-silver nanocomposite films offered excellent antimicrobial activity against various microorganisms.     

Robust one pot synthesis of colloidal silver nanoparticles by simple redox method and absorbance recovered sensing

Conventional synthesis of silver nanoparticles employs a reducing agent and a capping agent. In this report water-soluble silver nanoparticles (AgNPs) were prepared facilely by chemical reduction of Ag(I) ions. 4-Amino-3-(d-gluco-pentitol-1-yl)-4,5-dihydro-1,2,4-triazole-5-thione (AGTT) was used both as reducing and stabilizing agent. Direct heating methodology was found to be more suitable for achieving particles with a hydrodynamic diameter of ~20 nm. AGTT exists as tautomer in solution form and our studies indicate that -NH(2) group is involved in the reduction and stabilization of Ag(+) and thione (Δ=S) group of AGTT is possibly involved in stabilizing the nanoparticles via coordinate covalent linkage. Characterization of synthesized silver nanoparticles was performed by UV-vis, FT-IR and by FESEM. Based on the absorption properties of synthesized AgNPs, we used AgNPs to detect bovine serum albumin (BSA) and AgNPs-BSA composite nanoprobe was further applied to detect Cu(2+) based on absorbance recovery. The proposed method has advantages over existing methods in terms of rapid synthesis and stability of AgNPs and their applications. Analysis is reproducible, cost effective and highly sensitive. The lowest detectable concentration of BSA in this approach is 3 nM, and for Cu(2+) it can detect upto 200 pM.     

Photoreduction of Silver Salts Using Au Nanoparticles to Form a Core-Shell-Type Nanostructure: Insight into the Reaction Mechanism

In this paper, we highlight the formation of Ag/Au core-shell nanoparticles at room temperature by using a low-power laser. We have investigated the plasmon-induced reduction of Ag⁺ ions on bare Au nanoparticles synthesized by laser ablation technique, and citrate-capped Au nanoparticles synthesized by chemical method. It is demonstrated that citrate plays an important role for the reduction of silver ions. The citrate gets oxidized by the ‘hot’ holes produced due to the surface plasmon resonance (SPR) of the Au nanoparticles which then reduces the Ag⁺ ions to Ag. The importance of excitation laser wavelength is also demonstrated to facilitate the reduction process.

     

DNA-collagen complex as a carrier for Ag+ delivery

The possibility of DNA-collagen complex as a drug carrier was investigated. The interaction between DNA and silver ions was proved by CD spectra. The release property of the complex of DNA-Ag+ was measured through turbidity of PBS solution to indicate that silver ions could coordinate with base pairs of DNA, and be released slowly from the complex of DNA-Ag+. Collagen film, collagen-Ag+ film, DNA-collagen film and DNA-collagen-Ag+ film were prepared, and studied through SEM. Particles were found present in DNA-collagen-Ag+ film by SEM. These show that silver ions may be enclosed inside these particles, which led to the slow release of Ag+ to the environments. Two bacteria, Escherichia coli and Staphylococcus aureus, were used to study the antibiotic properties of the complex films. The growth of E. coli and S. aureus could be inhibited by these films. It indicates that DNA-collagen may be a good drug carrier for the drug-controlled release.