RecA-promoted sliding of base pairs within DNA repeats: quantitative analysis by a slippage assay

RecA that catalyses efficient homology search and exchange of DNA bases has to effect major transitions in the structure as well as the dynamics of bases within RecA-DNA filament. RecA induces slippage of paired strands in poly(dA)-poly(dT) duplex using the energy of ATP hydrolysis. Here, we have adopted the targeted ligation assay and quantified the strand slippage within a short central cassette of (dA)(4)-(dT)(4) duplex. The design offers a stringent test case for scoring a cross-talk between A residues with those of T that are diagonally placed on the opposite strand at either -3, -2, -1, +1, +2, or +3 pairing frames. As expected, the cross-talk levels in RecA mediated as well as thermally annealed duplexes were maximal in non-diagonal pairing frame (i.e., 0-frame), the levels of which fell off gradually as the frames became more diagonal, i.e., -3<-2<-1 or +3<+2<+1. Interestingly, the level of cross-talk in naked duplexes was intrinsically less efficient in minus frames than their plus frame counterparts. The asymmetry created in naked duplexes by such a disparity between minus versus plus frames was partially obviated by RecA. Moreover, RecA promoted a significantly higher level of cross-talk selectively in -2 and -1 frames, as compared to that in naked DNA, which suggests a model that the elevated cross-talk in RecA filament may be limited to base pairs housed within the same rather than adjacent RecA monomers.     

The mechanics of winding and unwinding helices in recombination: torsional stress associated with strand transfer promoted by RecA protein

Homologous recombination usually involves the production of heteroduplex DNA, DNA containing strands contributed from two different duplexes. RecA protein of E. coli can promote the formation of heteroduplex DNA in vitro by the exchange of DNA strands between two helical structures, duplex DNA and a helical recA nucleoprotein filament containing a single strand of DNA. Complete unwinding of the parental duplex and the rewinding of one strand with a new complement requires rotation of the helical structures about one another, or about their respective longitudinal axes. The observations described here demonstrate an association of torsional stress with strand exchange, and suggest that exchange is accomplished principally by concomitant rotation of duplex DNA and the recA nucleoprotein filament, each about its longitudinal axis.     

The simultaneous binding of two double-stranded DNA molecules by Escherichia coli RecA protein

We have characterized the double-stranded DNA (dsDNA) binding properties of RecA protein, using an assay based on changes in the fluorescence of 4',6-diamidino-2-phenylindole (DAPI)-dsDNA complexes. Here we use fluorescence, nitrocellulose filter-binding, and DNase I-sensitivity assays to demonstrate the binding of two duplex DNA molecules by the RecA protein filament. We previously established that the binding stoichiometry for the RecA protein-dsDNA complex is three base-pairs per RecA protein monomer, in the presence of ATP. In the presence of ATPgammaS, however, the binding stoichiometry depends on the MgCl2 concentration. The stoichiometry is 3 bp per monomer at low MgCl2 concentrations, but changes to 6 bp per monomer at higher MgCl2 concentrations, with the transition occurring at approximately 5 mM MgCl2. Above this MgCl2 concentration, the dsDNA within the RecA nucleoprotein complex becomes uncharacteristically sensitive to DNase I digestion. For these reasons we suggest that, at the elevated MgCl2 conditions, the RecA-dsDNA nucleoprotein filament can bind a second equivalent of dsDNA. These results demonstrate that RecA protein has the capacity to bind two dsDNA molecules, and they suggest that RecA or RecA-like proteins may effect homologous recognition between intact DNA duplexes.     

Electron microscopic visualization of RecA-DNA filaments: Evidence for a cyclic extension of duplex DNA

As visualized by electron microscopy, RecA protein binds in a highly cooperative manner to single-stranded fd DNA in solutions of 0.01 M Tris (pH 7.5). The resulting nucleoprotein filament loops are 1.25 μm in length, have a fiber diameter of 12 nm and show an indication of a 4.5 nm repeat along the axis of the compact fibers. RecA binds to linear duplex fd DNA in solutions of 0.01 M Tris (pH 7.5) to yield chains of beads which, in the presence of Mg²⁺ and ATP, coalesce into smooth filaments with a length of 1.9 μm (the length of protein-free fd duplex DNA) and have a fiber diameter of 12 nm. In solutions containing Mg²⁺ and ATP-γ-S, however, RecA binds to duplex DNA in a highly cooperative manner to yield rigid filaments 3.0 μm in length. These filaments are 12 nm in diameter and show a very clear 7.5 nm axial repeat. This extension of DNA to 150% of its usual length in the apparent absence of any single-stranded components suggests that the DNA helix must also be highly unwound and provides new insights into the mode of RecA action.     

Formation of nucleoprotein RecA filament on single-stranded DNA. Analysis by stepwise increase in ligand complexity

RecA protein plays a pivotal role in homologous recombination in Escherichia coli. RecA polymerizes on single-stranded (ss) DNA forming a nucleoprotein filament. Then double-stranded (ds) DNA is bound and searched for segments homologous to the ssDNA. Finally, homologous strands are exchanged, a new DNA duplex is formed, and ssDNA is displaced. We report a quantitative analysis of RecA interactions with ss d(pN)n of various structures and lengths using these oligonucleotides as inhibitors of RecA filamentation on d(pT)20. DNA recognition appears to be mediated by weak interactions between its structural elements and RecA monomers within a filament. Orthophosphate and dNMP are minimal inhibitors of RecA filamentation (I50 = 12-20 mM). An increase in homo-d(pN)2-40 length by one unit improves their affinity for RecA (f factor) approximately twofold through electrostatic contacts of RecA with internucleoside phosphate DNA moieties (f approximately = 1.56) and specific interactions with T or C bases (f approximately = 1.32); interactions with adenine bases are negligible. RecA affinity for d(pN)n containing normal or modified nucleobases depends on the nature of the base, features of the DNA structure. The affinity considerably increases if exocyclic hydrogen bond acceptor moieties are present in the bases. We analyze possible reasons underlying RecA preferences for DNA sequence and length and propose a model for recognition of ssDNA by RecA.     

Unwinding of heterologous DNA by RecA protein during the search for homologous sequences.

The search for homologous sequences promoted by RecA protein in vitro involves a presynaptic filament and naked duplex DNA, the multiple contacts of which produce nucleoprotein networks or coaggregates. The single-stranded DNA within the presynaptic filaments, however, is extended to an axial spacing 1.5 times that of B-form DNA. To investigate this paradoxical difference between the spacing of bases in the RecA presynaptic filament versus the target duplex DNA, we explored the effect of heterologous contacts on the conformation of DNA, and vice versa. In the presence of wheat germ topoisomerase I, RecA presynaptic filaments induced a rapid, limited reduction in the linking number of heterologous circular duplex DNA. This limited unwinding of heterologous duplex DNA, termed heterologous unwinding, was detected within 30 seconds and reached a steady state within a few minutes. Presynaptic filaments that were formed in the presence of ATP gamma S and separated from free RecA protein by gel filtration also generated a ladder of topoisomers upon incubation with relaxed duplex DNA and topoisomerase. The inhibition of heterologous contacts by 60 mM-NaCl or 5 mM-ADP resulted in a corresponding decrease in heterologous unwinding. In reciprocal fashion, the stability or number of heterologous contacts with presynaptic filaments was inversely related to the linking number of circular duplex DNA. These observations show that heterologous contacts with the presynaptic filament cause a limited unwinding of the duplex DNA, and conversely that the ability of the DNA to unwind stabilizes transient heterologous contacts.     

RecA realigns suboptimally paired frames of DNA repeats through a process that requires ATP hydrolysis

Microsatellite repeats such as mono-, di-, and trinucleotides are highly abundant and viable targets for homologous recombination in the genome. However, if recombination ensues in such repetitive regions, they are intrinsically prone to frame misalignments during pairing and might eventually give rise to genetic instabilities. Suboptimally paired frames lead to an abrogation of branch migration at the junctions of mixed sequences and repeats, due to a heterologous register. If so, can recombination machinery rectify such misalignments in order to avoid subsequent arrest in branch migration? We analyzed Escherichia coli RecA, the universal prototype of a recombinase, for its pairing abilities across repeats. We used a complementary pairing assay to test whether RecA can mediate realignments of stochastically paired suboptimal frames to a maximally aligned register. Here, we demonstrate that RecA-single stranded DNA filament indeed facilitates such a realignment, probably by sliding the paired strands across mono- and di- as well as trinucleotide repeats. These realignments apparently have no net directional bias. Such a putative "motor" function of RecA seems to be ATP hydrolysis-dependent.     

RecA protein reinitiates strand exchange on isolated protein-free DNA intermediates. An ADP-resistant process

Efficient homologous pairing de novo of linear duplex DNA with a circular single strand (plus strand) coated with RecA protein requires saturation and extension of the single strand by the protein. However, strand exchange, the transfer of a strand from duplex DNA to the nucleoprotein filament, which follows homologous pairing, does not require the stable binding of RecA protein to single-stranded DNA. When RecA protein was added back to isolated protein-free DNA intermediates in the presence of sufficient ADP to inhibit strongly the binding of RecA protein to single-stranded DNA, strand exchange nonetheless resumed at the original rate and went to completion. Characterization of the protein-free DNA intermediate suggested that it has a special site or region to which RecA protein binds. Part of the nascent displaced plus strand of the deproteinized intermediate was unavailable as a cofactor for the ATPase activity of RecA protein, and about 30% resisted digestion by P1 endonuclease, which acts preferentially on single-stranded DNA. At the completion of strand exchange, when the distal 5' end of the linear minus strand had been fully incorporated into heteroduplex DNA, a nucleoprotein complex remained that contained all three strands of DNA from which the nascent displaced strand dissociated only over the next 50 to 60 minutes. Deproteinization of this intermediate yielded a complex that also contained three strands of DNA in which the nascent displaced strand was partially resistant to both Escherichia coli exonuclease I and P1 endonuclease. The deproteinized complex showed a broad melting transition between 37 degrees C and temperatures high enough to melt duplex DNA. These results show that strand exchange can be subdivided into two stages: (1) the exchange of base-pairs, which creates a new heteroduplex pair in place of a parental pair; and (2) strand separation, which is the physical displacement of the unpaired strand from the nucleoprotein filament. Between the creation of new heteroduplex DNA and the eventual separation of a third strand, there exists an unusual DNA intermediate that may contain three-stranded regions of natural DNA that are several thousand bases in length.     

Homologous pairing in duplex DNA regions and the formation of four-stranded paranemic joints promoted by RecA protein. Effects of gap length and negative superhelicity

RecA protein catalyzes homologous pairing of partially single-stranded duplex DNA and fully duplex DNA to form stable joint molecules. We constructed circular duplex DNA with various defined gap lengths and studied the pairing reaction between the gapped substrate with fully double-stranded DNA. The reaction required a stoichiometric amount of RecA protein, and the optimal reaction was achieved at a ratio of 1 RecA monomer per 4 base pairs. The length of the gap, ranging from 141 to 1158 nucleotides, had little effect on the efficiency of homologous pairing. By using a circular gapped duplex DNA prepared from the chimeric phage M13Gori1, we were able to show the formation of nonintertwined or paranemic joints in duplex regions between the gapped and fully duplex molecules. The formation of such paranemic joints occurred efficiently and included nearly all of the DNA in the reaction mixture. The reaction required negative superhelicity, and pairing was greatly reduced with linear or nicked circular DNA. We conclude that one functional role of the single-stranded gap is for facilitating the binding of RecA protein to the duplex region of the gapped DNA. Once the nucleoprotein filament is formed, homologous pairing between the gapped and fully duplex DNA can take place anywhere along the length of the nucleoprotein complex.     

Absorption and fluorescence studies of the binding of the recA gene product from E. coli to single-stranded and double-stranded DNA. Ionic strength dependence

The binding of the recA gene product from E. coli to double-stranded and single-stranded nucleic acids has been investigated by following the change in melting temperature of duplex DNA and the fluorescence of single-stranded DNA or poly(dA) modified by reaction with chloroacetaldehyde. At low ionic strength, in the absence of Mg2+ ions, RecA protein binds preferentially to duplex DNA or poly(dA-dT). This leads to an increase of the DNA melting temperature. Stabilization of duplex DNA decreases when ionic strength or pH increases. In the presence of Mg2+ ions, preferential binding to single-stranded polynucleotides is observed. Precipitation occurs when duplex DNA begins to melt in the presence of RecA protein. From competition experiments, different single-stranded and double-stranded polydeoxynucleotides can be ranked according to their ability to bind RecA protein. Structural changes induced in nucleic acids upon RecA binding are discussed together with conformational changes induced in RecA protein upon magnesium binding.     

RecA protein-promoted homologous pairing between duplex molecules: functional role of duplex regions of gapped duplex DNA

RecA protein promotes homologous pairing and symmetrical strand exchange between partially single-stranded duplex DNA and fully duplex molecules. We constructed circular gapped DNA with a defined gap length and studied the pairing reaction between the gapped substrate and fully duplex DNA. RecA protein polymerizes onto the single-stranded and duplex regions of the gapped DNA to form a nucleoprotein filament. The formation of such filaments requires a stoichiometric amount of RecA protein. Both the rate and yield of joint molecule formation were reduced when the pairing reaction was carried out in the presence of a sub-saturating amount of RecA protein. The amount of RecA protein required for optimal pairing corresponds to the binding site size of RecA protein at saturation on duplex DNA. The result suggests that in the 4-stranded system the single-stranded as well as the duplex regions are involved in pairing. By using fully duplex DNA that shares different lengths and regions of homology with the gapped molecule, we directly showed that the duplex region of the gapped DNA increased both the rate and yield of joint molecule formation. The present study indicates that even though strand exchange in the 4-stranded system must require the presence of a single-stranded region, the pairing that occurs in duplex regions between DNA molecules is functionally significant and contributes to the overall activity of the gapped DNA.     

Magnesium ion-dependent activation of the RecA protein involves the C terminus

Optimal conditions for RecA protein-mediated DNA strand exchange include 6-8 mm Mg(2+) in excess of that required to form complexes with ATP. We provide evidence that the free magnesium ion is required to mediate a conformational change in the RecA protein C terminus that activates RecA-mediated DNA strand exchange. In particular, a "closed" (low Mg(2+)) conformation of a RecA nucleoprotein filament restricts DNA pairing by incoming duplex DNA, although single-stranded overhangs at the ends of a duplex allow limited DNA pairing to occur. The addition of excess Mg(2+) results in an "open" conformation, which can promote efficient DNA pairing and strand exchange regardless of DNA end structure. The removal of 17 amino acid residues at the Escherichia coli RecA C terminus eliminates a measurable requirement for excess Mg(2+) and permits efficient DNA pairing and exchange similar to that seen with the wild-type protein at high Mg(2+) levels. Thus, the RecA C terminus imposes the need for the high magnesium ion concentrations requisite in RecA reactions in vitro. We propose that the C terminus acts as a regulatory switch, modulating the access of double-stranded DNA to the presynaptic filament and thereby inhibiting homologous DNA pairing and strand exchange at low magnesium ion concentrations.     

Evidence for a four-strand exchange catalyzed by the RecA protein

Strand exchange between two duplexes is usually initiated as a three-strand event that requires the presence of a single-stranded overhang or gap in one of the two molecules. Here we show that the RecA protein can catalyze a four-strand exchange. Specifically, it can recombine short hairpin substrates with homologous stems provided that one of the hairpins possesses a chimeric DNA/RNA backbone. This four-strand exchange reaction goes to completion in the presence of ATPgammaS and releases a stable heteroduplex upon removal of the RecA protein. Under identical conditions, strand exchange between two DNA hairpins is incomplete and generates a nascent heteroduplex that rapidly dissociates when the RecA protein is denatured. Since presynaptic filament formation does not appear to melt either type of hairpin, we propose that exchange occurs between homologously aligned duplexes that are extended and unwound within a RecA filament. The first reaction provides a mechanism for gene targeting by chimeric double-hairpin oligonucleotides while the second reaction explains the ability of the RecA protein to transiently align double-stranded DNA molecules.     

Stabilization factors affecting duplex formation of peptide nucleic acid with DNA.

Peptide nucleic acid (PNA) is an oligonucleotide analogue in which the sugar-phosphate backbone is replaced by an N-(2-aminoethyl)glycine unit to which the nucleobases are attached. We investigated the thermodynamic behavior of PNA/DNA hybrid duplexes with identical nearest neighbors but with different sequences and chain lengths (5, 6, 7, 8, 10, 12, and 16 mers) to reveal whether the nearest-neighbor model is valid for the PNA/DNA duplex stability. CD spectra of 6, 7, and 8 mer PNA/DNA duplexes showed similar signal, while 10, 12, and 16 mer duplexes did not. The average difference in Delta G degrees (37) for short PNA/DNA duplexes with identical nearest-neighbor pairs was only 3.5%, whereas that of longer duplexes (10, 12, and 16 mers) was 16.4%. Therefore, the nearest-neighbor model seems to be useful at least for the short PNA/DNA duplexes. Thermodynamics of PNA/DNA duplexes containing 1--3 bulge residues were also studied. While the stability of the 12 mer DNA/DNA duplex decreased as the number of bulge bases increases, the number of bulge bases in PNA/DNA unchanged the duplex stability. Thus, the influence of bulge insertion in the PNA/DNA duplexes is different from that of a DNA/DNA duplex. This might be due to the different base geometry in a helix which may potentially make hydrogen bonds in a base pair and stacking interaction unfavorable compared with DNA/DNA duplexes.     

A chimeric Rec-A protein that implicates non-Watson-Crick interactions in homologous pairing.

The helical filament formed by RecA protein on single-stranded DNA plays an important role in homologous recombination and pairs with a complementary single strand or homologous duplex DNA. The RecA nucleoprotein filament also recognizes an identical single strand. The chimeric protein, RecAc38, forms a nucleoprotein filament that recognizes a complementary strand but is defective in recognition of duplex DNA, and is associated with phenotypic defects in repair and recombination. As described here, RecAc38 nucleoprotein filament is also defective in recognition of an identical strand, either when the filament has within it a single strand or duplex DNA. A model that postulates three DNA binding sites rationalizes these observations and suggests that the third binding site mediates non-Watson-Crick interactions that are instrumental in recognition of homology in duplex DNA.     

Study of interaction of XRCC1 with DNA and proteins of base excision repair by photoaffinity labeling technique

The X-ray repair cross-complementing group 1 (XRCC1) protein plays a central role in base excision repair (BER) interacting with and modulating activity of key BER proteins. To estimate the influence of XRCC1 on interactions of BER proteins poly(ADP-ribose) polymerase 1 (PARP1), apurinic/apyrimidinic endonuclease 1 (APE1), flap endonuclease 1 (FEN1), and DNA polymerase beta (Pol beta) with DNA intermediates, photoaffinity labeling using different photoreactive DNA was carried out in the presence or absence of XRCC1. XRCC1 competes with APE1, FEN1, and PARP1 for DNA binding, while Pol beta increases the efficiency of XRCC1 modification. To study the interactions of XRCC1 with DNA and proteins at the initial stages of BER, DNA duplexes containing a photoreactive group in the template strand opposite the damage were designed. DNA duplexes with 8-oxoguanine or dihydrothymine opposite the photoreactive group were recognized and cleaved by specific DNA glycosylases (OGG1 or NTH1, correspondingly), although the rate of oxidized base excision in the photoreactive structures was lower than in normal substrates. XRCC1 does not display any specificity in recognition of DNA duplexes with damaged bases compared to regular DNA. A photoreactive group opposite a synthetic apurinic/apyrimidinic (AP) site (3-hydroxy-2-hydroxymethyltetrahydrofuran) weakly influences the incision efficiency of AP site analog by APE1. In the absence of magnesium ions, i.e. when incision of AP sites cannot occur, APE1 and XRCC1 compete for DNA binding when present together. However, in the presence of magnesium ions the level of XRCC1 modification increased upon APE1 addition, since APE1 creates nicked DNA duplex, which interacts with XRCC1 more efficiently.     

Mechanism of in vitro expansion of long DNA repeats: effect of temperature, repeat length, repeat sequence, and DNA polymerases.

Studies of sequence repeat expansions from duplexes consisting of DNA repeat sequences greater than three bases are currently lacking. These studies are needed in order to gain a better understanding of DNA expansions in general and as a first step in understanding expansions of longer sequence repeats that have been implicated in human diseases. We have undertaken an in vitro study of tetranucleotide, hexanucleotide, and octanucleotide repeat expansions from short DNA duplexes using Taq DNA polymerase. Expansions of hexanucleotide repeats were also studied with the Klenow fragment of DNA polymerase I and with T4 DNA polymerase. Studies with Taq DNA polymerase show that expansions occur more readily as the length of the repeat sequence decreases but are generally more efficient at reaction temperatures closer to the melting point of the starting duplex. A mechanism for the observed expansions with Taq DNA polymerase is proposed that does not invoke strand slippage or DNA structure. Studies at 37 degrees C with Klenow pol I and T4 DNA polymerase indicate that the template-switching and/or strand-displacement activities of the polymerases used can play a major role in the apparent in vitro expansions of short repetitive DNA duplexes.     

NMR characterization of clustered bistrand abasic site lesions: effect of orientation on their solution structure

A unique characteristic of ionizing radiation and radiomimetic anticancer drugs is the induction of clustered damage: two or more DNA lesions (oxidized bases, abasic sites, or strand breaks) occurring in the same or different strands of the DNA molecule within a single turn of the helix. In spite of arising at a lower frequency than single lesions, clustered DNA damage represents an exotic challenge to the repair systems present in the cells and, in some cases, these lesions may escape detection and/or processing. To understand the structural properties of clustered DNA lesions we have prepared two oligodeoxynucleotide duplexes containing adjacent tetrahydrofuran residues (abasic site analogues), positioned one in each strand of the duplex in a 5' or 3' orientation, and determined their solution structure by NMR spectroscopy and molecular dynamics simulations. The NMR data indicate that both duplex structures are right-handed helices of high similarity outside the clustered damage site. The thermal stability of the duplexes is severely reduced by the presence of the abasic residues, especially in a 5' orientation where the melting temperature is 5 degrees C lower. The structures show remarkable differences at the lesion site where the extrahelical location of the tetrahydrofuran residues in the (AP)(2)-5'-staggered duplex contrasts with their smooth alignment along the sugar-phosphate backbone in the (AP)(2)-3'-staggered duplex.     

15-mer DNA duplexes containing an abasic site are thermodynamically more stable with adjacent purines than with pyrimidines

Abasic site (AP)-containing duplexes, with flanking adenine (A) or cytosine (C) bases, were shown to be more stable with flanking A than with C bases [Sági, J., Hang, B., and Singer, B. (1999) Chem. Res. Toxicol. 12, 917-923]. We investigated whether the lower-magnitude destabilization by an AP site, with A neighbors, is a general effect of the purine versus the pyrimidine neighbors. Duplex stability, as compared to that of the corresponding control duplexes, was markedly decreased by the incorporation of the AP site (x) opposite any of the four bases. However, for the duplexes containing T, A, or C opposite the AP site, replacement of the symmetric doublet flanking pyrimidine bases with purines resulted in a smaller destabilization effect. The average stabilizing effect of the symmetric doublet purine neighbors of an AP site opposite T, A, or C bases was 3.2 degrees C (DeltaT(m)) and 1.3 kcal/mol (DeltaDeltaG degrees (37)) compared to those of pyrimidine neighbors. In contrast, a G.AP pair reduced or eliminated the differential effect of the neighbors. Using unrestrained molecular dynamics, it was shown that for the duplexes containing T opposite the AP site, with doublet pyrimidine neighbors, there was a larger magnitude of curvature around the lesion site than for the duplexes with the purines flanking the AP site. Purines flanking the AP site tend to shift toward each other, creating overlap, in contrast to the flanking pyrimidines. This indicates the possibility of stacking between purine bases at the AP site and can be the reason for the observed smaller thermodynamic destabilization of the duplexes with the AAxAA and GGxGG central sequences, as compared to those with TTxTT and CCxCC sequences. This work showed that for an AP site the GC content is not the only determinant of duplex stability, but rather is influenced more by whether purines or pyrimidines flank the AP site.     

Synthesis and properties of defined DNA oligomers containing base mispairs involving 2-aminopurine.

DNA heptamers containing the mutagenic base analogue 2-aminopurine (AP) have been chemically synthesized and physically characterized. We report on the relative stabilities of base pairs between AP and each of the common DNA bases, as determined from heptamer duplex melts at 275 and 330 nm. Base pairs are ranked in order of decreasing stability: AP.T greater than AP.A greater than AP.C greater than AP.G. It is of interest that AP.A is more stable than AP.C even though DNA polymerase strongly favors the formation of AP.C over AP.A base pairs. Comparisons of melting profiles at 330 nm and 275 nm indicate that AP.T, AP.A, and AP.C base pairs are annealed in heptamer duplexes and melt 2-3 degrees prior to surrounding base pairs, whereas AP.G appears not to be annealed.