Label-free in situ imaging of lignification in the cell wall of low lignin transgenic Populus trichocarpa

Chemical imaging by confocal Raman microscopy has been used for the visualization of the cellulose and lignin distribution in wood cell walls. Lignin reduction in wood can be achieved by, for example, transgenic suppression of a monolignol biosynthesis gene encoding 4-coumarate-CoA ligase (4CL). Here, we use confocal Raman microscopy to compare lignification in wild type and lignin-reduced 4CL transgenic Populus trichocarpa stem wood with spatial resolution that is sub-μm. Analyzing the lignin Raman bands in the spectral region between 1,600 and 1,700 cm⁻¹, differences in lignin signal intensity and localization are mapped in situ. Transgenic reduction of lignin is particularly pronounced in the S2 wall layer of fibers, suggesting that such transgenic approach may help overcome cell wall recalcitrance to wood saccharification. Spatial heterogeneity in the lignin composition, in particular with regard to ethylenic residues, is observed in both samples. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Secondary Cell Wall Deposition in Developing Secondary Xylem of Poplar

Although poplar is widely used for genomic and biotechnological manipulations of wood, the cellular basis of wood development in poplar has not been accurately documented at an ultrastructural level. Developing secondary xylem cells from hybrid poplar (Populus deltoides × P. trichocarpa), which were actively making secondary cell walls, were preserved with high pressure freezing/freeze substitution for light and electron microscopy. The distribution of xylans and mannans in the different cell types of developing secondary xylem were detected with immunofiuorescence and immuno-gold labeling. While xylans, detected with the monoclonal antibody LM10, had a general distribution across the secondary xylem, mannans were enriched in the S2 secondary cell wall layer of fibers. To observe the cellular structures associated with secondary wall production, cryofixed fibers were examined with transmission electron microscopy during differentiation. There were abundant cortical microtubules and endomembrane activity in cells during the intense phase of secondary cell wall synthesis. Microtubule-associated small membrane compartments were commonly observed, as well as Golgi and secretory vesicles fusing with the plasma membrane.     

Cell-specific chemotyping and multivariate imaging by combined FT-IR microspectroscopy and orthogonal projections to latent structures (OPLS) analysis reveals the chemical landscape of secondary xylem

Fourier‐transform infrared (FT‐IR) spectroscopy combined with microscopy enables chemical information to be acquired from native plant cell walls with high spatial resolution. Combined with a 64 × 64 focal plane array (FPA) detector, 4096 spectra can be simultaneously obtained from a 0.3 × 0.3 mm image; each spectrum represents a compositional and structural ‘fingerprint’ of all cell wall components. For optimal use and analysis of such a large amount of information, multivariate approaches are preferred. Here, FT‐IR microspectroscopy with FPA detection is combined with orthogonal projections to latent structures discriminant analysis (OPLS‐DA). This allows for: (i) the extraction of spectra from single cell types, (ii) identification and characterization of different chemotypes using the full spectral information, and (iii) further visualization of the pattern of identified chemotypes by multivariate imaging. As proof of concept, the chemotypes of Populus tremula xylem cell types are described. The approach revealed unknown features about chemical plasticity and patterns of lignin composition in wood fibers that would have remained hidden in the dataset with traditional data analysis. The applicability of the method to Arabidopsis xylem and its usefulness in mutant chemotyping is also demonstrated. The methodological approach is not limited to xylem tissues but can be applied to any plant organ/tissue also using other techniques such as Raman and UV microspectroscopy.     

Maturation stress generation in poplar tension wood studied by synchrotron radiation microdiffraction

Tension wood is widespread in the organs of woody plants. During its formation, it generates a large tensile mechanical stress called maturation stress. Maturation stress performs essential biomechanical functions such as optimizing the mechanical resistance of the stem, performing adaptive movements, and ensuring the long-term stability of growing plants. Although various hypotheses have recently been proposed, the mechanism generating maturation stress is not yet fully understood. In order to discriminate between these hypotheses, we investigated structural changes in cellulose microfibrils along sequences of xylem cell differentiation in tension and normal wood of poplar (Populus deltoides × Populus trichocarpa 'I45-51'). Synchrotron radiation microdiffraction was used to measure the evolution of the angle and lattice spacing of crystalline cellulose associated with the deposition of successive cell wall layers. Profiles of normal and tension wood were very similar in early development stages corresponding to the formation of the S1 layer and the outer part of the S2 layer. Subsequent layers were found with a lower microfibril angle (MFA), corresponding to the inner part of the S2 layer of normal wood (MFA approximately 10°) and the G layer of tension wood (MFA approximately 0°). In tension wood only, this steep decrease in MFA occurred together with an increase in cellulose lattice spacing. The relative increase in lattice spacing was found close to the usual value of maturation strains. Analysis showed that this increase in lattice spacing is at least partly due to mechanical stress induced in cellulose microfibrils soon after their deposition, suggesting that the G layer directly generates and supports the tensile maturation stress in poplar tension wood.     

In situ FT-IR microscopic study on enzymatic treatment of poplar wood cross-sections

The feasibility of Fourier transform infrared (FT-IR) microscopy to monitor in situ the enzymatic degradation of wood was investigated. Cross-sections of poplar wood were treated with cellulase Onozuka RS within a custom-built fluidic cell. Light-optical micrographs and FT-IR spectra were acquired in situ from normal and tension wood fibers. Light-optical micrographs showed almost complete removal of the gelatinous (G) layer in tension wood. No structural and spectral changes were observed in the lignified cell walls. The accessibility of cellulose within the lignified cell wall was found to be the main limiting factor, whereas the depletion of the enzyme due to lignin adsorption could be ruled out. The fast, selective hydrolysis of the crystalline cellulose in the G-layer, even at room temperature, might be explained by the gel-like structure and the highly porous surface. Young plantation grown hardwood trees with a high proportion of G-fibers thus represent an interesting resource for bioconversion to fermentable sugars in the process to bioethanol.     

Compositional characterization and imaging of “wall-bound” acylesters of Populus trichocarpa reveal differential accumulation of acyl molecules in normal and reactive woods

Acylesterification is one of the common modifications of cell wall non-cellulosic polysaccharides and/or lignin primarily in monocot plants. We analyzed the cell-wall acylesters of black cottonwood (Populus trichocarpa Torr. & Gray) with liquid chromatography-mass spectrometry (LC-MS), Fourier transform-infrared (FT-IR) microspectroscopy, and synchrotron infrared (IR) imaging facility. The results revealed that the cell wall of dicotyledonous poplar, as the walls of many monocot grasses, contains a considerable amount of acylesters, primarily acetyl and p-hydroxycinnamoyl molecules. The "wall-bound" acetate and phenolics display a distinct tissue specific-, bending stress responsible- and developmental-accumulation pattern. The "wall-bound" p-coumarate predominantly accumulated in young leaves and decreased in mature leaves, whereas acetate and ferulate mostly amassed in the cell wall of stems. Along the development of stem, the level of the "wall-bound" ferulate gradually increased, while the basal level of p-coumarate further decreased. Induction of tension wood decreased the accumulation of the "wall-bound" phenolics while the level of acetate remained constant. Synchrotron IR-mediated chemical compositional imaging revealed a close spatial distribution of acylesters with cell wall polysaccharides in poplar stem. These results indicate that different "wall-bound" acylesters play distinct roles in poplar cell wall structural construction and/or metabolism of cell wall matrix components.     

Detection in situ and characterization of lignin in the<Emphasis Type="Italic"> G</Emphasis>-layer of tension wood fibres of<Emphasis Type="Italic"> Populus deltoides</Emphasis>

The occurrence of lignin in the additional gelatinous (G-) layer that differentiates in the secondary wall of hardwoods during tension wood formation has long been debated. In the present work, the ultrastructural distribution of lignin in the cell walls of normal and tension wood fibres from poplar (Populus deltoides Bartr. ex Marshall) was investigated by transmission electron microscopy using cryo-fixation–freeze-substitution in association with immunogold probes directed against typical structural motifs of lignin. The specificity of the immunological probes for condensed and non-condensed guaiacyl and syringyl interunit linkages of lignin, and their high sensitivity, allowed detection of lignin epitopes of definite chemical structures in the G-layer of tension wood fibres. Semi-quantitative distribution of the corresponding epitopes revealed the abundance of syringyl units in the G-layer. Predominating non-condensed lignin sub-structures appeared to be embedded in the crystalline cellulose matrix prevailing in the G-layer. The endwise mode of polymerization that is known to lead to these types of lignin structures appears consistent with such an organized cellulose environment. Immunochemical labelling provides the first visualization in planta of lignin structures within the G-layer of tension wood. The patterns of distribution of syringyl epitopes indicate that syringyl lignin is deposited more intensely in the later phase of fibre secondary wall assembly. The data also illustrate that syringyl lignin synthesis in tension wood fibres is under specific spatial and temporal regulation targeted differentially throughout cell wall layers.Abbreviations G-layer Gelatinous layer - G Guaiacyl monomeric unit - PATAg Periodic acid–thiocarbohydrazide–silver proteinate - S Syringyl monomeric unit     

Deposition and organisation of cell wall polymers during maturation of poplar tension wood by FTIR microspectroscopy

To advance our understanding of the formation of tension wood, we investigated the macromolecular arrangement in cell walls by Fourier transform infrared microspectroscopy (FTIR) during maturation of tension wood in poplar (Populus tremula x P. alba, clone INRA 717-1B4). The relation between changes in composition and the deposition of the G-layer in tension wood was analysed. Polarised FTIR measurements indicated that in tension wood, already before G-layer formation, a more ordered structure of carbohydrates at an angle more parallel to the fibre axis exists. This was clearly different from the behaviour of opposite wood. With the formation of the S₂ layer in opposite wood and the G-layer in tension wood, the orientation signals from the amorphous carbohydrates like hemicelluloses and pectins were different between opposite wood and tension wood. For tension wood, the orientation for these bands remains the same all along the cell wall maturation process, probably reflecting a continued deposition of xyloglucan or xylan, with an orientation different to that in the S₂ wall throughout the whole process. In tension wood, the lignin was more highly oriented in the S₂ layer than in opposite wood.     

Short-term effects of nitrogen availability on wood formation and fibre properties in hybrid poplar

The application of nitrogen-containing fertilisers is one approach used to increase growth rates and productivity of forest tree plantations. However, the effects of nitrogen fertilisation on wood properties have not been systematically assessed. The aim of this work was to document the impacts of nitrogen fertilisation on wood formation and secondary xylem fibre properties. We used three fertilisation treatments in which the level of ammonium nitrate was adjusted to 0, 1 and 10 mM in a complete nutrient solution applied daily over a period of 28 days in standardised greenhouse experiments with clonal material of Populus trichocarpa (Torr and Gray) × deltoides (Bartr. ex Marsh). We showed that there was a short-term and repeatable response in which xylem fibre morphology and secondary cell wall structure adapt to a shift in N availability. Under high-nitrogen exposure, xylem fibres were 17% wider and 18% shorter compared to the adequate nitrogen treatment. A very significant thickening of the fibre cell walls was also observed throughout the stem of trees receiving the high-N treatment. It appeared that cell wall structure was greatly affected by the high-N treatment as fibres developed a modified inner cell wall layer. Histological observations indicated that the internal cell wall layer was enriched in cellulose and chemical determinations showed that wood contained more holocellulose. Together, these results indicate that the response of poplar to nitrogen availability may involve marked effects on secondary xylem formation.     

Label-free in situ Imaging of Lignification in Plant Cell Walls

Meeting growing energy demands safely and efficiently is a pressing global challenge. Therefore, research into biofuels production that seeks to find cost-effective and sustainable solutions has become a topical and critical task. Lignocellulosic biomass is poised to become the primary source of biomass for the conversion to liquid biofuels^1-6. However, the recalcitrance of these plant cell wall materials to cost-effective and efficient degradation presents a major impediment for their use in the production of biofuels and chemicals⁴. In particular, lignin, a complex and irregular poly-phenylpropanoid heteropolymer, becomes problematic to the postharvest deconstruction of lignocellulosic biomass. For example in biomass conversion for biofuels, it inhibits saccharification in processes aimed at producing simple sugars for fermentation⁷. The effective use of plant biomass for industrial purposes is in fact largely dependent on the extent to which the plant cell wall is lignified. The removal of lignin is a costly and limiting factor⁸ and lignin has therefore become a key plant breeding and genetic engineering target in order to improve cell wall conversion.Analytical tools that permit the accurate rapid characterization of lignification of plant cell walls become increasingly important for evaluating a large number of breeding populations. Extractive procedures for the isolation of native components such as lignin are inevitably destructive, bringing about significant chemical and structural modifications^9-11. Analytical chemical in situ methods are thus invaluable tools for the compositional and structural characterization of lignocellulosic materials. Raman microscopy is a technique that relies on inelastic or Raman scattering of monochromatic light, like that from a laser, where the shift in energy of the laser photons is related to molecular vibrations and presents an intrinsic label-free molecular "fingerprint" of the sample. Raman microscopy can afford non-destructive and comparatively inexpensive measurements with minimal sample preparation, giving insights into chemical composition and molecular structure in a close to native state. Chemical imaging by confocal Raman microscopy has been previously used for the visualization of the spatial distribution of cellulose and lignin in wood cell walls^12-14. Based on these earlier results, we have recently adopted this method to compare lignification in wild type and lignin-deficient transgenic Populus trichocarpa (black cottonwood) stem wood¹⁵. Analyzing the lignin Raman bands^16,17 in the spectral region between 1,600 and 1,700 cm^-1, lignin signal intensity and localization were mapped in situ. Our approach visualized differences in lignin content, localization, and chemical composition. Most recently, we demonstrated Raman imaging of cell wall polymers in Arabidopsis thaliana with lateral resolution that is sub-μm¹⁸. Here, this method is presented affording visualization of lignin in plant cell walls and comparison of lignification in different tissues, samples or species without staining or labeling of the tissues.Download video file.^{(47M, mov)}     

Secondary Cell Wall Deposition in Developing Secondary Xylem of Poplar

Although poplar is widely used for genomic and biotechnological manipulations of wood, the cellular basis of wood development in poplar has not been accurately documented at an ultrastructural level. Developing secondary xylem cells from hybrid poplar (Populus deltoides x P. trichocarpa), which were actively making secondary cell walls, were preserved with high pressure freezing/freeze substitution for light and electron microscopy. The distribution of xylans and mannans in the different cell types of devel...     

Oxalic acid: a microbial metabolite of interest for the pulping industry

Oxalate is a common metabolite produced by almost all plant-pathogenic fungi. The degradation of cell wall from poplar chips and poplar sawdust by oxalate is reviewed here. Oxalate treatments decrease slightly the amount of sugars constituting hemicelluloses, but only in fibres and not in sawdust or wood chips. The examination of the cell wall ultrastructure of wood chips by transmission electron microscopy (TEM) after polysaccharide staining showed a characteristic fading of the staining of the S1/S2 and S2/S3 transition areas, supporting the idea that reactivity and organization of polysaccharides had changed after the oxalate treatments. Finally, all these changes enhanced the ability of the wood chips to be defibrated by a thermomechanical (TMP) process, as well as the further refining of the pulps. Looking at the fiber surface, it became apparent that fracture areas during the TMP pulping had moved toward the S2 layer, explaining why defibrating and refining occurred more easily, with less energy input in the process.     

Stress generation in the tension wood of poplar is based on the lateral swelling power of the G-layer

The mechanism of active stress generation in tension wood is still not fully understood. To characterize the functional interdependency between the G-layer and the secondary cell wall, nanostructural characterization and mechanical tests were performed on native tension wood tissues of poplar (Populus nigra x Populus deltoids) and on tissues in which the G-layer was removed by an enzymatic treatment. In addition to the well-known axial orientation of the cellulose fibrils in the G-layer, it was shown that the microfibril angle of the S2-layer was very large (about 36 degrees). The removal of the G-layer resulted in an axial extension and a tangential contraction of the tissues. The tensile stress-strain curves of native tension wood slices showed a jagged appearance after yield that could not be seen in the enzyme-treated samples. The behaviour of the native tissue was modelled by assuming that cells deform elastically up to a critical strain at which the G-layer slips, causing a drop in stress. The results suggest that tensile stresses in poplar are generated in the living plant by a lateral swelling of the G-layer which forces the surrounding secondary cell wall to contract in the axial direction.     

Cell Wall Architecture Prerequisite for the Cell Division in the Protoplasts of White Poplar, Populus alba L.

White poplar (Populus alba L.) protoplasts were investigatedat 0, 3,10, 20 and 30 d after regeneration to visualize thecell wall architecture prerequisite for cell division. The 10day-old cells just before cell division developed a thin walllayer with uneven deposition of cell wall materials and weresaved from bursting by suspension in low osmotic medium. Thethree dimensional architecture of the cell wall, as revealedby rapid-freezing and deep-etching electron microscopy, in 10day-old cells, constituted thin innermost lamellae on the plasmamembrane along with highly extended micronbrillar networks.These results suggest that the deposition of thin lamellae isimportant not only for cells to withstand bursting but alsoto induce cell division. The present investigations give thefirst account of the visualization of the three-dimensionalarchitecture of regenerated cell wall right before cell division. (Received July 31, 1997; Accepted April 6, 1998)     

Improvement of decay resistance of wood via combination treatment on wood cell wall: Swell-bonding with maleic anhydride and graft copolymerization with glycidyl methacrylate and methyl methacrylate

Poplar wood (Populus ussuriensis Kom) was modified by a novel combined two-step treatment to improve its decay resistance. Maleic Anhydride (MAN) was first employed to swell and bond to wood cell wall, and then mixed monomers of glycidyl methacrylate/methyl methacrylate (GMA/MMA) were used to graft copolymerization within wood cell lumen. The swelling and bonding of cell wall by MAN, interfacial compatibility between resultant polymer from GMA/MMA monomers and wood cell wall, and decay resistance of all composites were tested and analyzed by Scanning electron microscopy–Energy dispersive X-ray (SEM–EDX), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) apparatus. The results indicate that the volume of poplar wood treated by MAN swells about 9% with about 15% of weight percent gain, and MAN chemically bonds to the cell wall through substitution reaction with hydroxyl group, and the grafting adduct mainly remains as an amorphous form. The resultant Poplar-MAN shows improved decay resistance of 69.79% against brown fungus (Gloeophyllum trabeum (Pers. ex Fr.) Murr.) and 81.42% against white fungus (Phanerochaete chrysosporium Burdsall.) over those of untreated Poplar, respectively. After the combined two-step treatment, GMA and MMA are copolymerized within wood cell lumen, and the resultant polymer is also grafted onto wood cell wall, resulting in the improvement of interfacial compatibility between polymer and wood substance without obvious gaps. The decay resistance of the resultant composite from the combined two-step treatment against the brown decay fungus and the white decay fungus is improved by 97.64% and 99.17%, respectively, compared with those of untreated poplar wood; and also more excellent than those of MMA treated wood, GMA/MMA monomers treated wood, organic 3-Iodo-2-Propynyl Butyl Carbamate (IPBC) treated wood and inorganic boron compounds treated wood, respectively.     

G‐fibres in storage roots of Trifolium pratense (Fabaceae): tensile stress generators for contraction

Root contraction has been described for many species within the plant kingdom for over a century, and many suggestions have been made for mechanisms behind these contractions. To move the foliage buds deeper into the soil, the proximal part of the storage root of Trifolium pratense contracts by up to 30%. Anatomical studies have shown undeformed fibres next to strongly deformed tissues. Raman imaging revealed that these fibres are chemically and structurally very similar to poplar (Populus) tension wood fibres, which are known to generate high tensile stresses and bend leaning stems or branches upright. Analogously, an almost pure cellulosic layer is laid down in the lumen of certain root fibres, on a thin lignified secondary cell wall layer. To reveal its stress generation capacities, the thick cellulosic layer, reminiscent of a gelatinous layer (G‐layer) in tension wood, was selectively removed by enzymatic treatment. A substantial change in the dimensions of the isolated wood fibre bundles was observed. This high stress relaxation indicates the presence of high tensile stress for root contraction. These findings indicate a mechanism of root contraction in T. pratense (red clover) actuated via tension wood fibres, which follows the same principle known for poplar tension wood.