Self-assembly of recombinant amphiphilic oligopeptides into vesicles

The aim of the present study was to design amphiphilic oligopeptides that can self-assemble into vesicular structures. The ratio of hydrophilic to hydrophobic block length was varied, and peptides were designed to have a hydrophobic tail in which the bulkiness of the amino acid side groups increases toward the hydrophilic domain (Ac-Ala-Ala-Val-Val-Leu-Leu-Leu-Trp-Glu(2/7)-COOH). These peptides were recombinantly produced in bacteria as an alternative to solid-phase synthesis. We demonstrate with different complementary techniques (dynamic and static light scattering, tryptophan fluorescence anisotropy, and electron microscopy) that these amphiphilic peptides spontaneously form vesicles with a radius of approximately 60 nm and a low polydispersity when dispersed in aqueous solution at neutral pH. Morphology and size of the vesicles were relatively insensitive to the variations in hydrophilic block length. Exposure to acidic pH resulted in formation of visible aggregates, which could be fully reversed to vesicles upon pH neutralization. In addition, it was demonstrated that water-soluble molecules can be entrapped inside these peptide vesicles. Such peptide vesicles may find applications as biodegradable drug delivery systems with a pH-dependent release profile.     

Amphiphilic peptides with arginine and valine residues as siRNA carriers

An efficient and safe delivery carrier is required for the therapeutic application of siRNA. In this research, amphiphilic peptides with arginine and valine residues were evaluated as siRNA carriers. The peptides were composed of 1-4 arginine-blocks and 6 valine-blocks. In the aqueous solution, the arginine-valine peptides (RV peptides) formed micelles with hydrophobic cores comprised of a valine block and a cationic surface comprised of an arginine block. In a gel retardation assay, the RV peptides completely retarded siRNA at a 1:10 weight ratio (siRNA:peptide). A heparin competition assay suggested that the RV peptides formed more stable complexes with siRNA than they did with polyethylenimine (25 kDa, PEI25k). In an in vitro silencing assay, a dual luciferase expression (Renilla and firefly luciferases) vector, psiCHECK2, was co-transfected into human embryonic kidney 293 cells with Renilla-siRNA using the RV peptides. The specific silencing effect of Renilla luciferase was analyzed in reference to firefly luciferase. The results showed that the R3V6 peptide was more efficient than the R1V6, R2V6, and R4V6 peptides in silencing Renilla luciferase. In the flow cytometry and in vitro silencing studies, the R3V6 peptide delivered Renila-siRNA as efficiently as PEI25k. The siVEGF/R3V6 peptide also reduced endogenous vascular endothelial growth factor (VEGF) expression in CT27 cells as efficiently as PEI25k. A cytotoxicity assay showed that RV peptides did not cause any cytotoxicity. Therefore, RV peptides may be useful for the development of a safe and efficient delivery carrier of siRNA.     

Phosphorylation reverses the membrane association of peptides that correspond to the basic domains of MARCKS and neuromodulin.

Several groups have observed that phosphorylation causes the MARCKS (Myristoylated Alanine-Rich C Kinase Substrate) protein to move off cell membranes and phospholipid vesicles. Our working hypothesis is that significant membrane binding of MARCKS requires both hydrophobic insertion of the N-terminal myristate into the bilayer and electrostatic association of the single cluster of basic residues in the protein with acidic lipids and that phosphorylation reverses this electrostatic association. Membrane binding measurements with myristoylated peptides and phospholipid vesicles show this hydrophobic moiety could, at best, barely attach proteins to plasma membranes. We report here membrane binding measurements with basic peptides that correspond to the phosphorylation domains of MARCKS and neuromodulin. Binding of these peptides increases sigmoidally with the percent acidic lipid in the phospholipid vesicle and can be described by a Gouy-Chapman/mass action theory that explains how electrostatics and reduction of dimensionality produce apparent cooperativity. The electrostatic affinity of the MARCKS peptide for membranes containing 10% acidic phospholipids (10(4) M-1 = chi/[P], where chi is the mole ratio of peptide bound to the outer monolayer of the vesicles and [P] is the concentration of peptide in the aqueous phase) is the same as the hydrophobic affinity of the myristate moiety for bilayer membranes. Phosphorylation decreases the affinity of the MARCKS peptide for membranes containing 15% acidic lipid about 1000-fold and produces a rapid (t1/2 < 30 s) dissociation of the peptide from phospholipid vesicles.     

Angular variances for internal bond rotations of side chains in GXG-based tripeptides derived from (13)C-NMR relaxation measurements: Implications to protein folding

The study of backbone and side-chain internal motions in proteins and peptides is crucial to having a better understanding of protein/peptide "structure" and to characterizing unfolded and partially folded states of proteins and peptides. To achieve this, however, requires establishing a baseline for internal motions and motional restrictions for all residues in the fully, solvent-exposed "unfolded state." GXG-based tripeptides are the simpliest peptides where residue X is fully solvent exposed in the context of an actual peptide. In this study, a series of GXG-based tripeptides has been synthesized with X being varied to include all twenty common amino acid residues. Proton-coupled and -decoupled (13)C-nmr relaxation measurements have been performed on these twenty tripeptides and various motional models (Lipari-Szabo model free approach, rotational anisotropic diffusion, rotational fluctuations within a potential well, rotational jump model) have been used to analyze relaxation data for derivation of angular variances and motional correlation times for backbone and side-chain chi(1) and chi(2) bonds and methyl group rotations. At 298 K, backbone motional correlation times range from about 50 to 85 ps, whereas side-chain motional correlation times show a much broader spread from about 18 to 80 ps. Angular variances for backbone phi,psi bond rotations range from 11 degrees to 23 degrees and those for side chains vary from 5 degrees to 24 degrees for chi(1) bond rotations and from 5 degrees to 27 degrees for chi(2) bond rotations. Even in these peptide models of the "unfolded state," side-chain angular variances can be as restricted as those for backbone and beta-branched (valine, threonine, and isoleucine) and aromatic side chains display the most restricted motions probably due to steric hinderence with backbone atoms. Comparison with motional data on residues in partially folded, beta-sheet-forming peptides indicates that side-chain motions of at least hydrophobic residues are less restricted in the partially folded state, suggesting that an increase in side-chain conformational entropy may help drive early-stage protein folding. Copyright 1999 John Wiley & Sons, Inc.     

Synthesis and characterization of star poly(epsilon-caprolactone)-b-poly(ethylene glycol) and poly(L-lactide)-b-poly(ethylene glycol) copolymers: evaluation as drug delivery carriers

Two types of 32 arm star polymers incorporating amphiphilic block copolymer arms have been synthesized and characterized. The first type, stPCL-PEG 32, is composed of a polyamidoamine (PAMAM) dendrimer as the core with radiating arms having poly(epsilon-caprolactone) (PCL) as an inner lipophilic block in the arm and poly(ethylene glycol) (PEG) as an outer hydrophilic block. The second type, stPLA-PEG 32, is similar but with poly(L-lactide) (PLA) as the inner lipophilic block. Characterization with SEC, (1)H NMR, FTIR, and DSC confirmed the structure of the polymers. Micelle formation by both star copolymers was studied by fluorescence spectroscopy. The stPCL-PEG 32 polymer exhibited unimolecular micelle behavior. It was capable of solubilizing hydrophobic molecules, such as pyrene, in aqueous solution, while not displaying a critical micelle concentration. In contrast, the association behavior of stPLA-PEG 32 in aqueous solution was characterized by an apparent critical micelle concentration of ca. 0.01 mg/mL. The hydrophobic anticancer drug etoposide can be encapsulated in the micelles formed from both polymers. Overall, the stPCL-PEG 32 polymer exhibited a higher etoposide loading capacity (up to 7.8 w/w % versus 4.3 w/w % for stPLA-PEG 32) as well as facile release kinetics and is more suitable as a potential drug delivery carrier.     

Cross-strand side-chain interactions versus turn conformation in beta-hairpins.

A series of designed peptides has been analyzed by 1H-NMR spectroscopy in order to investigate the influence of cross-strand side-chain interactions in beta-hairpin formation. The peptides differ in the N-terminal residues of a previously designed linear decapeptide that folds in aqueous solution into two interconverting beta-hairpin conformations, one with a type I turn (beta-hairpin 4:4) and the other with a type I + G1 beta-bulge turn (beta-hairpin 3:5). Analysis of the conformational behavior of the peptides studied here demonstrates three favorable and two unfavorable cross-strand side-chain interactions for beta-hairpin formation. These results are in agreement with statistical data on side-chain interactions in protein beta-sheets. All the peptides in this study form significant populations of the beta-hairpin 3:5, but only some of them also adopt the beta-hairpin 4:4. The formation of beta-hairpin 4:4 requires the presence of at least two favorable cross-strand interactions, whereas beta-hairpin 3:5 seems to be less susceptible to side-chain interactions. A protein database analysis of beta-hairpins 3:5 and beta-hairpins 4:4 indicates that the former occur more frequently than the latter. In both peptides and proteins, beta-hairpins 3:5 have a larger right-handed twist than beta-hairpins 4:4, so that a factor contributing to the higher stability of beta-hairpin 3:5 relative to beta-hairpin 4:4 is due to an appropriate backbone conformation of the type I + G1 beta-bulge turn toward the right-handed twist usually observed in protein beta-sheets. In contrast, as suggested previously, backbone geometry of the type I turn is not adequate for the right-handed twist. Because analysis of buried hydrophobic surface areas on protein beta-hairpins reveals that beta-hairpins 3:5 bury more hydrophobic surface area than beta-hairpins 4:4, we suggest that the right-handed twist observed in beta-hairpin 3:5 allows a better packing of side chains and that this may also contribute to its higher intrinsic stability.     

Role of recurrent hydrophobic residues in catalysis of helix formation by T cell-presented peptides in the presence of lipid vesicles

We tested the hypothesis that the recurrence of hydrophobic amino acids in a polypeptide at positions falling in an axial, hydrophobic strip if the sequence were coiled as an alpha helix, can lead to helical nucleation on a hydrophobic surface. The hydrophobic surface could anchor such residues, whereas the peptide sequence grows in a helical configuration that is stabilized by hydrogen bonds among carbonyl and amido NH groups along the peptidyl backbone of the helix, and by other intercycle interactions among amino acid side chains. Such bound, helical structures might protect peptides from proteases and/or facilitate transport to a MHC-containing compartment and thus be reflected in the selection of T cell-presented segments. Helical structure in a series of HPLC-purified peptides was estimated from circular dichroism measurements in: 1) 0.01 M phosphate buffer, pH 7.0, 2) that buffer with 45% trifluoroethanol (TFE), and 3) that buffer with di-O-hexadecyl phosphatidylcholine vesicles. By decreasing the dielectric constant of the buffer, TFE enhances intrapeptide interactions generally, whereas the lipid vesicles only provide a surface for hydrophobic interactions. The peptides varied in their strip-of-helix hydrophobicity indices (SOHHI; the mean Kyte-Doolittle hydrophobicities of residues in an axial strip of an alpha helix) and in proline content. Structural order for peptides with helical circular dichroism spectra was estimated as percentage helicity from circular dichroism theta 222 nm values and peptide concentration. A prototypic alpha helical peptide with three cycles plus two amino acids and an axial hydrophobic strip of four leucyl residues (SOHHI = 3.8) was disordered in phosphate buffer, 58% helical in that buffer with 48% TFE, and 36% helical in that buffer with vesicles. Percentage helicity in the presence of vesicles of the subset of peptides without proline followed their SOHHI values. Peptides with multiple prolyl residues had circular dichroism spectra with strong signals, but since they did not have altered spectra in the presence of vesicles relative to phosphate buffer alone, the hydrophobic surface of the vesicle did not appear to stabilize those structures.     

Membrane activity and transfection ability of amphipathic polycations as a function of alkyl group size

Cationic membrane disruptive peptides such as melittin would appear to have attributes necessary for DNA delivery: DNA binding via electrostatic interactions and membrane lysis to enable cytoplasmic delivery. However, the relatively small overall charge of membrane disruptive peptides results in weak interactions with DNA. As a model of cationic membrane disruptive peptides, amphiphilic polyvinyl ethers were synthesized. The number of positively charged groups incorporated into these polymers is substantially greater than membrane-active peptides, which enables these polymers to form stable complexes with DNA. By varying the length of the hydrophobic groups incorporated into the polymer from one to four carbons, the dependence of membrane activity on side chain length was established. The ability of these polymers to transfect DNA in tissue culture was tested, and it was found that transfection efficiency is dependent upon the membrane disruptive activity of the polymer. Comparison of melittin and synthetic polymers suggests that transfection and toxicity appear to be dependent upon their affinity for DNA. This demonstration of relationships among membrane lysis, transfection, DNA binding, and polymer side-chain composition establishes a new class of transfection reagents and may guide in the design of polymers and formulations that will enable efficient in vivo transfection.     

Alginate as an auxiliary bacterial membrane: binding of membrane-active peptides by polysaccharides.

The chronicity of Pseudomonas aeruginosa infections in cystic fibrosis (CF) patients is characterized by overproduction of the exopolysaccharide alginate, in which biofilm bacteria are embedded. Alginate apparently contributes to the antibiotic resistance of bacteria in this form by acting as a diffusion barrier to positively charged antimicrobial agents. We have been investigating cationic antimicrobial peptides (CAPs) (prototypic sequence: KKAAAXAAAAAXAAWAAXAAAKKKK-NH(2), where X is any of the 20 commonly occurring amino acids) that were originally designed as transmembrane mimetic peptides. Peptides of this group above a specific hydrophobicity threshold insert spontaneously into membranes and have antibacterial activity at micromolar concentrations. While investigating the molecular basis of biofilm resistance to peptides, we found that the anionic alginate polysaccharide induces conformational changes in the most hydrophobic of these peptides typically associated with insertion of such peptides into membrane environments [Chan et al., J. Biol. Chem. (2004) vol. 279, pp. 38749-38754]. Through a combination of experiments measuring release of the fluorescent dye calcein from phospholipid vesicles, peptide interactions with vesicles in the presence and absence of alginate, and affinity of peptides for alginate as a function of net peptide core hydrophobicity, we show here that alginate offers a microenvironment that provides a protective mechanism for the encased bacteria by both binding and promoting the self-association of the CAPs. The overall results indicate that hydrophilic alginate polymers contain a significant hydrophobic compartment, and behave as an 'auxiliary membrane' for bacteria, thus identifying a unique protective role for biofilm exopolysaccharide matrices.     

Effects of total hydrophobicity and length of the hydrophobic domain of a signal peptide on in vitro translocation efficiency.

The hydrophobic domain of the signal peptide of OmpF-Lpp, a model secretory protein, was systematically engineered so as to be composed of different lengths of polyleucine residues or polymers with alternate leucine and alanine residues, and the effects of the length and nature of the hydrophobic stretch on the rate of in vitro translocation were studied using everted membrane vesicles of Escherichia coli. The translocation reaction exhibited high substrate specificity as to the number of hydrophobic residues. The results suggest that the hydrophobic domain is recognized specifically by a component(s) of the secretory machinery rather than nonspecifically by the hydrophobic region of the membrane. The in vitro translocation thus demonstrated required SecA and ATP and was markedly enhanced upon imposition of the proton motive force, as in the case of secretory proteins possessing a natural signal peptide. The highest translocation rate was obtained with the octamer in the case of polyleucine-containing signal peptides, whereas it was the decamer in the case of ones containing both leucine and alanine. These results suggest that the total hydrophobicity of the hydrophobic region of the signal peptides is an important determinant of the substrate specificity.     

Tryptophan fluorescence study on the interaction of the signal peptide of the Escherichia coli outer membrane protein PhoE with model membranes

The interaction of the signal peptide of the Escherichia coli outer membrane protein PhoE with different phospholipid vesicles was investigated by fluorescence techniques, using a synthetic mutant signal peptide in which valine at position -8 in the hydrophobic sequence was replaced by tryptophan. First it was established that this mutation in the signal sequence of prePhoE does not affect in vivo and in vitro translocation efficiency and that the biophysical properties of the synthetic mutant signal peptide are similar to those of the wild-type signal peptide. Next, fluorescence experiments were performed which showed an increase in quantum yield and a blue shift of the emission wavelength maximum upon interaction of the signal peptide with lipid vesicles, indicating that the tryptophan moiety enters a more hydrophobic environment. These changes in intrinsic fluorescence were found to be more pronounced in the presence of phosphatidylglycerol (PG) or cardiolipin (CL) than with phosphatidylcholine (PC). In addition, quenching experiments demonstrated a shielding of the tryptophan fluorescence from quenching by the aqueous quenchers iodide and acrylamide upon interaction of the signal peptide with lipid vesicles, a shielding in the case of acrylamide that was more pronounced in the presence of negatively charged lipids. Finally it was found that acyl chain brominated lipids incorporated into phospholipid bilayers were able to quench the tryptophan fluorescence of the signal peptide, with the quenching efficiency in CL vesicles being much higher than in PC vesicles. The results clearly demonstrate that the PhoE signal peptide interacts strongly with different lipid vesicles.(ABSTRACT TRUNCATED AT 250 WORDS)     

Beta-hairpin and beta-sheet formation in designed linear peptides

Recent knowledge about the determinants of beta-sheet formation and stability has notably been improved by the structural analysis of model peptides with beta-hairpin structure in aqueous solution. Several experimental studies have shown that the turn region residues can not only determine the stability, but also the conformation of the beta-hairpin. Specific interstrand side-chain interactions, hydrophobic and polar, have been found to be important stabilizing interactions. The knowledge acquired in the recent years from peptide systems, together with the information gathered from mutants in proteins, and the analysis of known protein structures, has led to successful design of a folded three-stranded monomeric beta-sheet structure.     

The role of charge and hydrophobicity in peptide-lipid interaction: a comparative study based on tryptophan fluorescence measurements combined with the use of aqueous and hydrophobic quenchers

The interaction of interrelated model peptides with model membranes has been studied by techniques based on tryptophan fluorescence. The peptides used are derivatives of the sequence H-Ala-Met-Leu-Trp-Ala-OH, which was designed for this purpose. Several modifications yielded a set of 13 penta- and hexapeptides varying in net charge, hydrophobicity, charge distribution, and the intramolecular position of the tryptophan residue with respect to the charge(s). The affinity of these peptides for small unilamellar vesicles (SUV) consisting of zwitterionic egg phosphatidylcholine (eggPC) and negatively charged beef heart cardiolipin (bhCL) has been investigated in a comparative way. The criteria for affinity comprise (1) intrinsic fluorescence changes upon titration of the peptides with the lipid vesicles, (2) reduced accessibility of the peptides to aqueous quenchers of tryptophan fluorescence (I- and acrylamide) in the presence of lipid, and (3) exposure to membrane-incorporated fluorescence quenchers, brominated phosphatidylcholines (BrPC). Application of BrPC brominated at different positions along the acyl chains provided information on the membrane topology of the peptides. With respect to the extent of affinity for zwitterionic membranes, the overall hydrophobicity of the peptides is the main determinant. A comparison of the affinity for PC of equally hydrophobic peptides carrying either a single positive or negative charge reveals preferential interaction of the cationic peptide. Both hydrophobic and electrostatic interactions determine the affinity of positively charged mono- and divalent peptides for CL vesicles. The distribution of the charged moieties in divalent positively charged peptides, either both at one end of the molecule or one at each end, has little influence on the affinity of these peptides for CL but does affect the extent of exposure to BrPC. Upon decreasing the surface charge density of the vesicles by diluting CL with increasing amounts of PC, both types of peptides show different behavior. The position of the tryptophan relative to the charged moiety in the peptide molecule is shown to affect the fluorescent properties upon interaction with vesicles. Concerning the membrane topology, all peptides adopt a localization near the membrane surface, with the neutral peptides inserting slightly deeper into the bilayer than the charged peptides. The results allow a comparative analysis of the factors determining the extents and modes of lipid-model peptide interaction; in addition, the validity of the methods applied is discussed.     

Exploring hydrophobicity limits of polyproline helix with oligomeric octahydroindole‐2‐carboxylic acid

The polyproline‐II helix is the most extended naturally occurring helical structure and is widely present in polar, exposed stretches and “unstructured” denatured regions of polypeptides. Can it be hydrophobic? In this study, we address this question using oligomeric peptides formed by a hydrophobic proline analogue, (2S,3aS,7aS)‐octahydroindole‐2‐carboxylic acid (Oic). Previously, we found the molecular principles underlying the structural stability of the polyproline‐II conformation in these oligomers, whereas the hydrophobicity of the peptide constructs remains to be examined. Therefore, we investigated the octan‐1‐ol/water partitioning and inclusion in detergent micelles of the oligo‐Oic peptides. The results showed that the hydrophobicity is remarkably enhanced in longer oligomeric sequences, and the oligo‐Oic peptides with 3 to 4 residues and higher are specific towards hydrophobic environments. This contrasts significantly to the parent oligoproline peptides, which were moderately hydrophilic. With these findings, we have demonstrated that the polyproline‐II structure is compatible with nonpolar media, whereas additional manipulations of the terminal functionalities feature solubility in extremely nonpolar solvents such as hexane.     

Characterization of peptides corresponding to the seven transmembrane domains of human adenosine A2a receptor

Human adenosine A(2)a receptor is a member of the G-protein-coupled receptor (GPCR) superfamily of seven-helix transmembrane (TM) proteins. To test general models for membrane-protein folding and to identify specific features of folding and assembly for this representative member of an important and poorly understood class of proteins, we synthesized peptides corresponding to its seven TM domains. We assessed the ability of the peptides to insert into micelles and vesicles and measured secondary structure for each peptide in aqueous and membrane-mimetic environments. CD spectra indicate that each of the seven TM peptides form thermally stable, independent alpha-helical structures in both micelles and vesicles. The helical content of the peptides depends on the nature of the membrane-mimetic environment. Four of the peptides (TM3, TM4, TM5, and TM7) exhibit very high-helical structure, near the predicted maximum for their TM segments. The TM1 peptide also adopts relatively high alpha-helical structures. In contrast, two of peptides, TM2 and TM6, display low alpha helicity. Similarly, the ability of the peptides to insert into membrane-mimetic environments, assayed by intrinsic tryptophan fluorescence and fluorescence quenching, varied markedly. Most peptides exhibit higher alpha helicity in anionic sodium dodecyl sulfate than in neutral dodecyl-beta-D-maltoside micelles, and TM2 was disordered in zwiterionic DMPC but was alpha-helical in negatively charged DMPC/DMPG vesicles. These findings strongly suggest that electrostatic interactions between lipids and peptides control the insertion of the peptides and may be involved in membrane-protein-folding events. The measured helical content of these TM domains does not correlate with the predicted helicity based on amino acid sequence, pointing out that, while hydrophobic interactions can be a major determinant for folding of TM peptides, other factors, such as electrostatic interactions or helix-helix interactions, may play significant roles for specific TM domains. Our results represent a comprehensive analysis of helical propensities for a human GPCR and support models for membrane-protein folding in which interactions between TM domains are required for proper insertion and folding of some TM helix domains. The tendency of some peptides to self-associate, especially in aqueous environments, underscores the need to prevent improper interactions during folding and refolding of membrane proteins in vivo and in vitro.     

Cell engineering biointerface focusing on cytocompatibility using phospholipid polymer with an isomeric oligo(lactic acid) segment

Initial contact between a biological environment and a biomaterial ultimately decides the in vivo performance. Therefore, the fabrication of a delicate biointerface is important because it can be utilized as a platform for novel biomaterials. For the preparation of advanced biomedical devices such as biochips, nanoparticles, and cell engineering devices, the surface properties may be modified by the design of polymeric biomaterials. Anomalous phospholipid polymers with an isomeric oligo(lactic acid) segment were designed and evaluated as a biointerface. The phospholipid polymer containing 2-methacryloyloxyethyl phosphorylcholine was easily copolymerized with isomeric oligo(lactic acid) macromonomers, and the obtained polymer could easily form thin coating membranes as biointerfaces. The oligo(lactic acid) involves three kinds of isomers: dl-, d-, and l-forms. The favorable characteristic on the surface provides regulation of cell-material interactions on the biointerface. The oligo(lactic acid) segment could form hydrophobic domains, which were considered to be located on the interface, to enhance protein adsorption and cell adhesion. The most favorable characteristics on the biointerface were dual functions of cytocompatibility by the phospholipid polymer and cell adhesion property by the oligo(lactic acid) segment. In this study, we focused on the biological responses such as protein adsorption and cell adhesion by change in the oligo(lactic acid) component. The cell viability on the confluent stage was evaluated in terms of metabolic activity.     

Flow cytometry and live confocal analysis for the evaluation of the uptake and intracellular distribution of FITC-ODN into HaCaT cells

In this study, the mechanism of the internalization and the cellular distribution of 59 fluorescein conjugated PS-ODN (FITC-ODN) after transfection with different mixed lipidic vesicles/oligo complexes (lipoplexes) have been investigated. Mixed lipidic vesicles were prepared with one of the most used cationic lipid (DOTAP) and different amounts of a cholic acid (UDCA) to release the oligo into HaCaT cells. Using flow cytometry, the cellular uptake of the oligo was studied with and without different inhibitors able to block selectively the different pathways involved in the internalization mechanism. The intracellular distribution of the oligo was analyzed by confocal laser scanning microscopy (CLSM), treating the cells with the lipoplexes and directly observing without any fixing procedure. To better carry out the colocalization studies, fluorescent-labeled markers, specific for the different cellular compartments, were coincubated with 59 fluorescein-conjugated 29-mer phosphorotioate oligonucleotide (FITC-ODN). The different lipidic vesicles affect the internalization mechanism of FITC-ODN. After using the inhibitors, the uptake of complexes involved a different internalization mechanism. The live CLSM analysis demonstrated that, after 1 hour from the complex incubation, the oligo was transferred into cells and localized into the endosomes; after 24 hours, the oligo was intracellularly localized close to the nuclear structure in a punctuate pattern. However, the results from fusion experiments showed also a binding of a quite low amount of oligo with the cell membranes.     

Preferred conformation of endomorphin-1 in aqueous and membrane-mimetic environments.

The newly discovered endomorphin-1 (Tyr-Pro-Trp-Phe-NH2) and endomorphin-2 (Tyr-Pro-Phe-Phe-NH2) are potent opioid peptides with the highest affinity and selectivity for the mu receptor among all known endogenous ligands. To investigate a possible correlation between these biological properties and the conformational preferences of the small peptides, a comparative structural analysis was performed of endomorphin-1 in aqueous buffer and in membrane-mimicking SDS and AOT normal and reverse micelles by the use of CD, FT-IR, fluorescence and(1)H-NMR spectroscopy. It is well established for opioid peptides that, independently of the receptor selectivity, the Tyr1 residue plays the role of the primary pharmacophore and that the orientation of the second aromatic pharmacophore relative to the tyrosine side-chain dictates the mu or delta-receptor selectivity. By varying the environment of endomorphin-1 from water to the amphipathic SDS micelles and even more efficiently to the AOT reverse micelles, the display of the aromatic side-chains changes from an interaction of the Tyr1 and Phe4 residues to a switch of the Trp3 indole group into close contact with the phenolic moiety to prevent this type of interaction and to force an orientation of the Phe4 side-chain into the opposite direction. This conformational switch is accompanied by a stabilization of the cis -Pro2 isomer and the resulting spatial array of the pharmacophoric groups correlate well with the structural model of mu receptor-bound opioid peptides. The results indicate that AOT reverse micelles with a woof 10, where almost exclusively ordered water is secluded in the cavity, constitute with their electrostatic and hydrophobic potential an excellent mimetic of amphipathic surfaces as present on lipid bilayers and on ligand-recognition and ligand-binding sites of proteins.     

Fluorescence Studies on a Designed Peptide of REIP as a Potential Hydrophobic Drug Carrier

Many hydrophobic drugs have limited or no activity in clinical application due to their poor aqueous solubility. In order to find fine delivery system, we designed a novel peptide REIP (Ac-RIEIRIEIAPAIEIRIEIR) and investigated its properties as a delivery system. Microcrystal of pyrene could be stabilized by the peptide REIP and suspended in aqueous solution. We used pyrene as a model hydrophobic drug and egg phosphatidylcholine (EPC) vesicles as model membranes to study the ability of REIP in hydrophobic drug encapsulation and transfer to EPC vesicles (liposome) by analyzing the fluorescence spectroscopy of pyrene. It was found that pyrene was present in the crystalline form when stabilized by REIP and was able to transfer into EPC vesicles in molecular form. The concentration of pyrene released into the EPC vesicles at a given time was quantified using a calibration curve. Double exponential curve fitting was better for the release profiles of REIP-Py solution than single exponential curve fitting.     

Preparation of magnetic microspheres from water-in-oil emulsion stabilized by block copolymer dispersant

A new method for the preparation of magnetic microspheres is reported. The preparation involved first the dispersion of an aqueous phase, containing magnetite nanoparticles and a water-soluble homopolymer, into droplets in an organic medium using an amphiphilic block copolymer as the dispersant. This was followed by water distillation at a raised temperature from the aqueous droplets to yield polymer/magnetite particles. The structure of the particles was then locked in by a reagent being added to cross-link the water-soluble copolymer block and homopolymer. Since the hydrophobic block of the copolymer consisted of a protected polyester, the removal of the protective moieties from the coronal chains yielded poly(acrylic acid) or other functional polymers to render water dispersibility to the spheres and to enable biomolecule immobilization.