The International Standard for Kanamycin

The International Reference Preparation of Kanamycin has been replaced by the International Standard for Kanamycin. The potency of the standard is based upon a collaborative study in ten laboratories in ten countries. Each ampoule of the International Standard of Kanamycin is defined as containing the activity of 10345 International Units of Kanamycin.     

The International Standard for sisomicin

An International Standard for Sisomicin has been established on the basis of a collaborative assay. There were seven participating laboratories in seven countries. The activity of the contents of each ampoule of the International Standard of Sisomicin is defined as 35,200 International Units of Sisomicin.     

Evaluation of Fourth International Standard for Whole Cell Pertussis Vaccine

Whole cell pertussis vaccine is still widely used in many countries. An International Standard is needed for its potency control. The Third International Standard for Pertussis Vaccine was prepared about 40 years ago and its replacement was recommended by the Expert Committee for Biological Standardisation (ECBS) of the WHO. Material in ampoules coded 94/532 was prepared as a candidate replacement and has been evaluated in international collaborative studies which consisted of two parts. The first part, to assess the suitability of the candidate standard by comparing it with the Second International Standard for Pertussis Vaccine (IS2) involved 14 laboratories in 11 countries. The second part to compare the candidate standard with the Third International Standard for Pertussis Vaccine (IS3) involved 16 laboratories in 14 countries. Since 1995 various other studies have included the international standards and the results of these are also considered in assessing likely continuity of the IU for potency of whole cell pertussis vaccine. The preparation in ampoules coded 94/532 was adopted by the WHO ECBS in October 2006 as the 4th International Standard for whole cell pertussis vaccine and assigned an activity of 40 IU per ampoule on the basis of the studies reported here.     

The International Standard for Netilmicin

An International Standard for Netilmicin has been established on the basis of a collaborative assay. There were five participating laboratories in five countries. The activity of the contents of each ampoule of the International Standard for Netilmicin is defined as 4810 IU of netilmicin.     

Rabies vaccine standardization: International collaborative study for the characterization of the fifth international standard for rabies vaccine

A collaborative study was carried out to establish a replacement for the International Standard for Rabies Vaccine, the stocks of which are exhausted. Three rabies vaccines for human use derived from different rabies virus strains and prepared on different cell culture substrates were compared with the International Standard for Rabies Vaccine using in vivo and in vitro assay methods in a collaborative study involving 14 participants. The proposed fifth International Standard (PISRAV) which was derived from the same virus strain as the present international standard preparation, the Pitman Moore (PM) strain, was found to be approximately twice as potent relative to the International Standard in immunogenicity assays as in antigenicity assays. On the other hand another vaccine, derived from the LEP strain, was considerably more potent in antigenicity assays than in immunogenicity assays. The glycoprotein of the proposed replacement standard measured in antigenicity assays appeared to be stable at +37 degrees C for 245 days, whereas the immunogenicity of the proposed replacement vaccine was sensitive to this heat treatment and the vaccine lost 66% of its immunogenic potency. The results of this study indicate that the NIH protection test should continue to form the primary basis for potency assay of rabies vaccine as glycoprotein content does not appear to correlate with immunogenic potency for different types of vaccine. The vaccine coded PISRAV has been established as the fifth International Standard for Rabies Vaccine and a potency of 16 International Units of Rabies Vaccine (based on the immunogenicity assays) assigned to the contents of each ampoule. Each ampoule has also been assigned a unitage of 10 IU of PM Rabies Virus Glycoprotein and 135 IU of PM Rabies Virus Ribonucleoprotein.     

World Health Organization International Standards for highly purified human, porcine and bovine insulins

The 4th International Standard (IS) for Insulin, established in 1958, consists of a mixture of relatively impure bovine and porcine insulins and is not suitable as a standard for the assay of highly purified single-species insulins presently used in the treatment of diabetes. Preparations of human, bovine and porcine crystalline insulins, representative of current highly purified therapeutic insulins, have now been studied in an international collaborative study carried out by twenty-three laboratories in fifteen countries. In the collaborative study described here, each of the three preparations was found to be suitable for use as a standard for insulin for bioassay and each was established by WHO in 1986 as an international standard. The 4th IS of Insulin bovine/porcine (code numbered 58/6) has been discontinued. Insulin preparations should now be calibrated in terms of International Units defined by the standard for the appropriate species: the International Standard for Insulin, Human, the International Standard for Insulin, Bovine, or the International Standard for Insulin, Porcine.     

A collaborative study to establish an International Standard Rabies immunoglobulin of human origin

Because the supply of the International Standard for Anti-rabies Serum was very low, the WHO initiated a search for a replacement product. The US Food and Drug Administration agreed to undertake a collaborative study using a human rabies immunoglobulin previously purchased for use as a US standard. The potency of this product was determined, in International Units (IU) per millilitre using the rapid fluorescent focus inhibition test for measuring rabies antibody. The mean potency value was found to be 59 IU per ampoule. In June 1984 this preparation was accepted by WHO as the International Standard for Rabies Immunoglobulin.     

Experience with the international standardization of the biological activity of the 3d Standard for streptomycin

The activity of the third International Standard of streptomycin was determined to be equal to 755 IU/mg with the use of accurately weighed amounts of streptomycin and 78037 IU with the use of streptomycin ampoules. The Standardization Center of the WHO decided to use the whole content of the ampoule of the Third International Standard of streptomycin, the activity of which is determined to be equal to 78500 IU per an ampoule.     

The Second International Standard for somatropin (recombinant DNA-derived human growth hormone): preparation and calibration in an international collaborative study.

A preparation of somatropin (recombinant DNA-derived human growth hormone) was prepared as lyophilised ampoules according to WHO procedures for international biological standards. The candidate preparation (98/574) was evaluated in an international collaborative study (16 laboratories, nine countries), with the following aims: (i) to determine the suitability of the preparation to serve as the International Standard for somatropin by studying its performance in the current range of physico-chemical and biological assay methods employed for somatropin; (ii) to assign a content in terms of the existing (first) International Standard for somatropin, using the currently recognised assay procedure (Size Exclusion High Performance Liquid Chromatography, SE HPLC); (iii) to confirm the specific biological activity of the candidate preparation; (iv) to confirm the stability of the candidate preparation. On the basis of the collaborative study WHO agreed that: the preparation in ampoules coded 98/574 is suitable to serve as the next WHO International Standard for somatropin; the preparation in ampoules coded 98/574 should be established as the second International Standard for somatropin, with a defined ampoule content of 1.95 mg total somatropin plus somatropin-related proteins per ampoule; the specific activity of the preparation should be defined as 3.0 IU/mg somatropin.     

The International Standard for Endotoxin: evaluation in an international collaborative study

An ampouled preparation of bacterial endotoxin, coded 84/650, was evaluated in 35 laboratories in 12 countries for its suitability to serve as the International Standard for Endotoxin. The ampouled preparation was calibrated in terms of the USA National Standard, EC5, in Limulus Amoebocyte Lysate gelation, turbidimetric and chromogenic tests and in rabbit pyrogen tests. On the basis of the results reported here, with the agreement of the participants in the study, and with the authorization of the Expert Committee on Biological Standardization of the World Health Organization, the preparation coded 84/650 was established in 1986 as the International Standard for Endotoxin for Limulus Gelation Tests with an assigned unitage of 14,000 IU of endotoxin per ampoule.     

Hepatitis A Immunoglobulin: An International Collaborative Study to Establish the Second International Standard

A collaborative study was carried out to assess the suitability of a candidate replacement material for the International Standard for hepatitis A immunoglobulin, which was found to be reactive for HCV RNA, and to calibrate it in International Units. The candidate standard, coded 97/646, was derived from a bulk of 16% immunoglobulin supplied by the Central Laboratory of the Netherlands Red Cross, Amsterdam, and diluted 1 in 2 in H2O resulting in a final immunoglobulin concentration of 8%. Sixteen laboratories from 11 countries participated in the study and contributed data from 64 assays performed using six commercial assay kits and four in-house methods. All assays were analysed as parallel line bioassays comparing assay response with log concentration. The overall mean potency of the candidate replacement immunoglobulin standard, 97/646, relative to the International Standard for hepatitis A immunoglobulin, was 98.6 IU/ml. A freeze-dried serum preparation, 97/648, was also calibrated in this study and had a potency of 22.64 IU/ml. The Second International Standard for hepatitis A immunoglobulin, human, was established by the World Health Organisation Expert Committee on Biological Standardisation in 1998 with a potency of 49 IU per ampoule when reconstituted in 0.5 ml.     

Report of a collaborative study to calibrate the Second International Standard for parvovirus B19 antibody

A collaborative study was undertaken to assess the suitability of a replacement for the First International Standard for parvovirus B19 IgG, human serum and to calibrate it in IU. The proposed standard, which is a pool of sera from 16 US blood donors, was assayed along with the First International Standard, a coded duplicate of the proposed standard and a plasma sample from a single blood donor. Nine laboratories from eight countries participated in the studies and five different assay kits were used. Two kits contained VP1+VP2, one kit contained VP1 only and two kits, one of which was used by five participants contained VP2 only. Differences in detection of the proposed standard and the individual plasma were observed with assay kits containing different antigens, VP1, VP2 or VP1+VP2. However, since VP1 is a minor capsid protein and on its own does not assemble into virus like particles and the dominant response in individuals appears to be against VP2, it was considered reasonable to utilize only the data from kits containing VP2 antigen for the calibration of the proposed standard. The results of this study demonstrated that the proposed standard coded 01/602 was suitable to serve as the replacement International Standard for parvovirus B19, serum IgG, and this preparation was established as the Second International Standard for parvovirus B19 antibody, plasma human, with an assigned unitage of 77 IU per ampoule by the Expert Committee on Biological Standardisation of the World Health Organisation in February 2003.     

Collaborative study to assess the suitability of a candidate International Standard for yellow fever vaccine

Yellow fever vaccines are routinely assayed by plaque assay. However, the results of these assays are then converted into mouse LD(50) using correlations/conversion factors which, in many cases, were established many years ago. The minimum required potency in WHO Recommendations is 10(3) LD(50)/dose. Thirteen participants from 8 countries participated in a collaborative study whose aim was to assess the suitability of two candidate preparations to serve as an International Standard for yellow fever vaccine. In addition, the study investigated the relationship between the mouse LD(50) test and plaque forming units with a view to updating the WHO recommendations. Plaque assays were more reproducible than mouse assays, as expected. Differences in sensitivities of plaque assays were observed between laboratories but these differences appear to be consistent within a laboratory for all samples and the expression of potency relative to the candidate standard vaccine improved the reproducibility of assays between laboratories. However, the use of potencies had little effect on the between laboratory variability in mouse LD(50) assays. There appears to be a consistent relationship between overall mean LD(50) and plaques titre for all study preparations other than sample E. The slope of the correlation curve is >1 and it would appear that 10(3) LD(50) is approximately equivalent to 10(4) plaque forming units (PFU), based on the overall means of all laboratory results. The First International Standard for yellow fever vaccine, NIBSC Code 99/616, has been established as the First International Standard for yellow fever vaccine by the Expert Committee of Biological Standards of the World Health Organisation. The International Standard has been arbitrarily assigned a potency of 10(4.5) International Units (IU) per ampoule. Manufacturers and National Control Laboratories are including the First International Standard for yellow fever vaccine in routine assays so that the minimum potency in IU of vaccines released for use and which meet the current minimum potency of 10(3) LD(50) in mouse assays, can be determined. These data will be analysed before a review of the WHO requirements, including the minimum potency per dose, is undertaken.     

Evaluation of a candidate International Standard for Meningococcal Group C polysaccharide

Meningococcal group C (MenC) plain polysaccharide (PS) and conjugate vaccines are primarily evaluated by physicochemical methods to ensure that batches are consistently manufactured. As different assays are employed to quantify the MenC PS content of final formulations and bulk intermediaries, there is a need for an International MenC PS Standard to calibrate internal references used in the different laboratories. Twelve laboratories from nine different countries participated in a collaborative study to determine the MenC PS content of a candidate International Standard MenC PS preparation (08/214) and to assess its suitability. On the basis of the results from this study the candidate standard 08/214 was established as an International Standard for the quantification of MenC PS content in vaccines and components. It has a content of 1.192 ± 0.192 mg MenC PS/ampoule (expanded uncertainty with coverage factor of k = 2.365 corresponding to a 95% level of confidence), as determined by the resorcinol assays carried out by eight of the participating laboratories. The standard is available from The National Institute of Biological Standards and Control who act as guardians and distributors of the material under the auspices of WHO.     

A new ISO/FDIS 14242-1 compatible hip prosthesis simulator: E-SIM]

The continuing development of new, highly sophisticated materials for the articulating surfaces of total hip endoprostheses involves the need for testing, not only of biocompatibility and dynamic loadability, but also of tribological properties (friction, wear, lubrication). For decades, the wear resistance of these materials has been tested in wear simulators. In consequence of the currently often widely differing test methods, the technical committee (TC 150) of the ISO (International Organization for Standardization) has been concerned to develop an International Standard (ISO/FDIS 14242 1 and 2: Implants for Surgery--wear of total hip joint prostheses--on the basis of kinetic and kinematic data from gait analysis. This new standard will be the basis for ensuring the comparability of scientific data obtained from tribological testing of total hip endoprothesis. The new hip simulator, E-SIM, presented in this paper, complies with the currently published FDIS (Final Draft International Standard), and enables testing in accordance with these specifications.     

Evaluation of the saccharide content and stability of the first WHO International Standard for Haemophilus influenzae b capsular polysaccharide

Haemophilus influenzae b conjugate vaccines (Hib) are almost entirely evaluated by physico-chemical methods to ensure the consistency of manufacture of batches. As different assays are employed for the quantification of Hib capsular polysaccharide PRP (polyribosyl ribitol phosphate; 5-D-ribitol-(1-->1)-beta-D-ribose-3-phosphate) in final formulations and bulk components, there was deemed a need for an International Standard of Hib PRP polysaccharide to be made available. Ten laboratories from 8 different countries participated in a collaborative study to determine the PRP content and assess the suitability of a candidate International Standard PRP preparation (02/208). The results illustrate that a reduction in between-laboratory variability could be achieved by use of a common reference preparation and data analysis showed no significant differences in the values obtained by the different assays: ribose, phosphorus, and high performance anion exchange chromatography-pulsed amperometric detection (HPAEC-PAD), suggesting the suitability of the proposed reference for use across these assays for quantification of PRP content in Hib vaccines. On the basis of the results of this study, the First International Standard for PRP, NIBSC Code 02/208, has been established by the Expert Committee of Biological Standards of the World Health Organisation, with a content of 4.933+/-0.267mg/ampoule, as determined by the ribose assays carried out by 7 of the participating laboratories.     

Third International Standard for pertussis vaccine: international confirmation study of activity of British Standard for pertussis vaccine, coded 66/303.

The first British Standard (BS) (Code 66/303) for pertussis whole cell vaccine was prepared from the same suspension of Bordetella pertussis as the now exhausted Second International Standard for Pertussis Vaccine (2ndIS). The BS and the 2ndIS were compared and calibrated in a previous international study. This report describes a small international study, which included the BS, the 1stIS and the 2ndIS so that the present relationship of these preparations to one another could be assessed. The results of this study show that the relationship of the BS to the 1stIS is consistent with its established unitage of 46 IU per ampoule. The results further show that the potency of the BS is broadly consistent with that of the 2ndIS and that the BS has not lost activity relative to the 2ndIS (from which it was previously found to be indistinguishable). Based on its original calibration and supported by the results of this present study, the BS has been established as the Third International Standard for Pertussis Vaccine, with an assigned unitage of 46 IU per ampoule.     

A collaborative assay of the proposed third British Reference Preparation for Pertussis Vaccine and of the relative potencies of the second International Standard and the second British Reference Preparation for Pertussis Vaccine

A collaborative assay has been carried out to estimate the mouse protective potency of a freeze-dried preparation of Bordetella pertussis (88/522) intended to serve as the third British Reference Preparation for Pertussis Vaccine (third BRP). The opportunity was also taken of reassessing the relationship between the second International Standard for Pertussis Vaccine and the second British Reference Preparation for Pertussis Vaccine (second BRP). Workers in nine laboratories took part in the study and together completed 19 assays which were considered to be statistically valid. Based on the results of the study it is proposed that ampouled preparation code number 88/522 be established as the third BRP with an assigned potency of 50 IU per ampoule. The evidence of this study also suggests that the relationship between the second International Standard for Pertussis Vaccine and the second BRP has not changed significantly since they were originally established.     

The 1st International Standard for anti-measles serum

The 1st International Standard for anti-measles serum has been established on the basis of a collaborative study. There were four participating laboratories in four countries and three types of assay used. This standard has been assigned a potency of 5 IU anti-measles antibody per ampoule.